ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Centerline of Holes:
5.50
Material Type:
Steel
Sold in Quantity:
Each
Finish:
Zinc
Thread Pitch:
7/16"-14
Material Thickness:
.23
Garage Sale:
No
Notes
Mounts a GM metric caliper to a Pinto/Mustang II spindle for use with a Granada 10.5" rotor. Includes caliper pins.
Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the left front wheel.

Customer Reviews

This product has no reviews.

Product Q&A

2 questions : 2 answers

1 answers

What GM rotor do you recommend with this bracket?

RobButtrum
April 29, 2014

What GM rotor do you recommend with this bracket?

Answers

April 30, 2014
EricM
This bracket is designed to be used with Granada style rotor part number 91674078 only. There is no GM rotor that works with this bracket.
1 answers

will these brackets work with a 2 inch dropped spindle?

everett
Virginia, USA
June 13, 2013

will these brackets work with a 2 inch dropped spindle?

Answers

June 13, 2013
Jason
This brake caliper bracket is designed to mount a GM metric caliper to a Pinto/Mustang II spindle for use with a 10.5" Granada rotor. It will not work with dropped spindles.
Page 1 of 1

You may also be interested in:

GM Caliper Slider Bolt
(Part #8352300542)
                        The overall length of these slide bolts is 4-3/8".  The underhead length is 3-3/8".  The thread on the bolts is 7/16-20 (US fine).
                    
AFCO 40121PL Granada 10-1/2 Inch Brake Caliper Bracket, LH
(Part #10640121PL)
                        

These brackets are used to mount GM "Metric" calipers to Pinto/Mustang II spindles for use with what is basically a 1975-1981 "Granada" 10-1/2" brake rotor.

Available in LH or RH. Sides are reversed on 1973 & older spindles.

Item Details

GM Metric Calipers
Thread: 7/16" Fine
Thickness: 1/4"
Speedway Dirtworks 10.5 Inch Granada Style Disc Brake Rotor
(Part #91674078)
                        

Our 1975-1981 Ford 10.5" Granada style rotor is specifically designed for the rigors of dirt track racing. Drilled with a Wide 5 pattern with a 5-on-5" bolt circle. Includes 5/8" coarse quick-start wheel studs (installed).

NOT for use in asphalt racing.

IMCA 1978-1988 GM Metric Caliper, LH Left Hand, 7/16-20 Inlet, Racing
(Part #91031045-L)
                        

These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

  • IMCA approved
  • No core charge required
  • 7/16"-20 inlet
  • Can be used with brake hoses from Pre-1978 GM intermediate cars
  • Brake pads & bolts sold separately

Note: Does NOT include brake pads or slider bolts and bushings.

Item Details

7/16"-20 Inlet
5 1/2" mount spacing
1978-1988 GM Midsize Metric Caliper-LH-10mm x 1.5 Inlet-5.5 Mount
(Part #91031047-L)
                        

These stock replacement single piston metric calipers were standard equipment on 1978-88 GM midsize cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to midsize 1969-1977 caliper.

  • No core charge required
  • 10mm x 1.50 inlet 
  • Speedway 156 pads and slider bolts included

Item Details

10mm x 1.50 Inlet
5 -+" mount spacing
Includes pads & slider bolts