Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Speedway 1960-66 Chrysler Screw-In Lower Ball Joint

Price:$14.99
Lower Ball Joint, Screw In
Price:
$14.99
EA
In Stock
Item #:
91720036
Item Details:
Moog # K727
1960-66 Chrysler
Speedway 1960-66 Chrysler Screw-In Lower Ball Joint
Click image to enlarge Click image to enlarge
  • Speedway 1960-66 Chrysler Screw-In Lower Ball Joint
  • Speedway 1960-66 Chrysler Screw-In Lower Ball Joint
  • Speedway 1960-66 Chrysler Screw-In Lower Ball Joint
No video at this time.
 

Lower screw-in ball joint fits most strut cars, 1960-66 Chrysler, 1971-1976 Impala and most wide-type dirt cars. Also fits Speedway "strut-type" tubular lower control arms such as 910-343-16, -17, -18, -19.

  • The measurements for the wrench area is 2.125"  
  • The flat area and the round area is 2.320."
  • The threaded area on the ball joint is 2.025."
  • 91720036
    Overall Height
    4.750" (4 3/4")
    Outside Diameter
    2.000"
    Mounting Thread Length
    1.170"
    Shank Length
    2.750" (2 3/4")
    Degree of Taper
    7 degree
    Taper Small End
    0.760"
    Taper Large End
    0.890"
    Material Type
    Steel
    Sold in Quantity
    Each
    Notes
    Same as Moog K727
  • Chrysler
    • 300 1960-61
    • Imperial 1960-66
    • New Yorker 1960-62
    • Saratoga 1960
  • Dodge
    • B100 Van 1971-80
    • B150 Van 1981-94
    • B200 Van 1971-80
    • B250 Van 1981-94
    • B300 Van 1971-80
    • B350 Van 1981-94
    • CB300 1974-80
    • D100 Pickup 1972-89
    • D150 Pickup 1977-93
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
Our Techs also Suggest the Following:
Steel Ball Joint Sleeve, Screw-In
Price:
$7.99
EA
In Stock
Item #:
91034816
Item Details:
Fits 917-20036 lower ball joint
2.5" O.D.
2.020" I.D.
1" Height
You May Also Be Interested In...
  • Speedway Tapered Ball Joint Reamer, 7 Degree
    Speedway Tapered Ball Joint Reamer, 7 Degree
    (18 Ratings)
    Price: $79.99
    More Info
    Speedway Tapered Ball Joint Reamer, 7 Degree
    x 
    							                        
    
                                                        
    Tapered reamers for proper fitting of ball joints to spindles, tie rod ends to spindles, etc. These have 1/2" shank. The 1-1/2" per foot reamer, also known as a 7° tapered reamer, works with Speedway ball joints 917-20031, 917-20032, and 910-34323. 
    Measures a little less than 1/2" at the small end and 1" at the big end.
  • Howe Racing 22412 60-66 Chrysler-Type Precision Lower Ball Joint-Alum.
    Howe Racing 22412 60-66 Chrysler-Type Precision Lower Ball Joint-Alum.
    Price: $74.99
    More Info
    Howe Racing 22412 60-66 Chrysler-Type Precision Lower Ball Joint-Alum.
    x 
    							                        
    
                                                        
    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.
    NOT IMCA Approved.
    Precision Ball Joint Illustration
    Precision Lower Ball Joint Application Chart
  • AFCO 20036LF Low Friction 1960-66 Chrysler-Type Lower Ball Joint
    AFCO 20036LF Low Friction 1960-66 Chrysler-Type Lower Ball Joint
    Price: $46.99
    More Info
    AFCO 20036LF Low Friction 1960-66 Chrysler-Type Lower Ball Joint
    x 
    							                        
    
                                                        
    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!
    It is critical to handling that suspension components be as free as  possible to move.  Low friction ball joints allow the suspension to give  rather than allowing the tire to bounce over rough surfaces.  Low tire  pressures magnify the need to minimize friction in the suspension. 
    • Precision  machined to tight tolerances, providing consistent resistance  throughout the travel of the ball joint to deliver consistent  performance 
    • Improves weight transfer and Frees up suspension for more consistent, repeatable chassis tuning 
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control 
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction 
    • Provides more accurate set-ups during vehicle scaling 
    • Stock appearing, Meets or exceeds standard ball joint strength
    • Lower input steering efforts and faster steering wheel return
    Checking Ball Joint Wear (PDF)
  • AFCO 20036 Standard 1960-66 Chrysler-Type Lower Ball Joint
    AFCO 20036 Standard 1960-66 Chrysler-Type Lower Ball Joint
    Price: $31.99
    More Info
    AFCO 20036 Standard 1960-66 Chrysler-Type Lower Ball Joint
    x 
    							                        
    
                                                        
    Not all ball joint are created equal.  That's why AFCO uses the best components from the top manufacturers.  There are many different design characteristics and manufacturing processes that account for the quality and performance of ball joints.  These joints will give you the AFCO advantage!
    • 7 degree taper 
    Fits:
    • Most strut cars, 1960-66 Chrysler, 1971-1976 Impala and most wide-type dirt cars. 
    • Also fits Speedway "strut-type" tubular lower control arms such as 910-343-16, -17, -18, -19.