McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Phone

800.979.0122

Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Small Block Chevy Harmonic Balancer, 6-3/4 Inch, Black

SAME DAY SHIPPING! Order within the next 12 hours 46 minutes and receive same day shipping

Specs
Material Type:
Steel
Weight:
8.50
Sold in Quantity:
Each
Overall Thickness:
2.31
Finish:
Painted
Inside Diameter:
1.20
Outside Diameter:
6.75
SFI Rated:
No
Thickness:
1.1875
Garage Sale:
No
Notes
Not recommended for RPM's in excess of 6500.
Small Block Chevy Harmonic Balancer, 6-3/4 Inch, Black

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Small block Chevy stock-type replacement 6-3/4" diameter harmonic balancer. For internal balance engines.

  • NOT recommended for RPM's in excess of 6500
  • NOT SFI certified
  • Internal balance

Application

  • Chevrolet Small Block 262-350 c.i. V-8 (1955-1995, except LT & LS 5.7L)
  • Chevrolet 348-409 W-blocks

Item Details

Not SFI Certified

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

jt
south dakota
Product Rating

i would buy this again

March 15, 2010
has multiple timing marks and additional marks for setting valves
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

3 questions : 3 answers

Where is the TDC mark? I understand that Chevy balancers changed the location a couple times, depending on year (pre-/post 1969).

1 answers
RonNova
Alabama
December 30, 2014

Where is the TDC mark? I understand that Chevy balancers changed the location a couple times, depending on year (pre-/post 1969).

Answers

December 30, 2014
EricM
As you can see in the picture the TDC mark is just slightly offset from the crank keyway. I believe this is the pre-1969 location but you will want to compare that location to yours. We highly recommend checking your true top dead center location after installing any balance to make sure your timing pointer is correct. It is very common for balancers to vary a few degrees.

What single groove crankshaft pulley will match this balancer to my short water pump? I need a part recommendation for a single groove crank pulley that is compatible with the short water pump on the 350 SBC. The old damaged pulley is approximately 6 and 9/16" in diameter and 1.7" in depth. The depth does not appear to be a standard for either a short or a long water pump. Is there a Speedway part no.? Please advise.

1 answers
Macxmjm
North Carolina, USA
October 06, 2014

What single groove crankshaft pulley will match this balancer to my short water pump? I need a part recommendation for a single groove crank pulley that is compatible with the short water pump on the 350 SBC. The old damaged pulley is approximately 6 and 9/16" in diameter and 1.7" in depth. The depth does not appear to be a standard for either a short or a long water pump. Is there a Speedway part no.? Please advise.

Answers

October 08, 2014
EricM
We offer a single groove pulley for standard short water pumps which is part number 91015422 and it is 1.35" depth. If your 1975 engine has the stock water pump and pulleys then it is more than likely a Corvette engine. The Corvette in that era had an odd length water pump that was just a little longer than the standard "short water pump" for a small block Chevy. You will need to get the specific replacement for it in order to keep belt alignment correct. A Corvette restoration company may be your best bet for finding a replacement pulley.

What is total weight and what is thickness? looking for 6.75 diameter for my e mod motor lightest available but it must be 6.75 minimum diameter for SBC internal alance

1 answers
TECHMAN
Florida, USA
December 04, 2013

What is total weight and what is thickness? looking for 6.75 diameter for my e mod motor lightest available but it must be 6.75 minimum diameter for SBC internal alance

Answers

December 05, 2013
EricM
This is a stock replacement 6.75" balancer. The weight of it will be nearly identical to stock. I list it as approximately 8.5 lbs.
Page 1 of 1

You may also be interested in:

Chevy 350 Harmonic Balancer, 8 Inch, Plain Steel
(Part #91015357)
                        

Small block Chevy 350 c.i. V-8 stock-type replacement 8" harmonic balancers. Internal balanced. Dampers are designed for press fit.

  • Ring and hub are bonded (vulcanized) to the elastomer
  • Surpasses the reliability and strength of OEM
  • NOT SFI-Approved
Professional Products 80010 Chevy 350 Lightweight Balancer, 6 Inch
(Part #91015363)
                        

This 6" harmonic balancer fits 350 c.i. Small Block Chevys and only weighs 5.1 lbs. Plus, the balancing cut out is on the backside so they can't tell what crank you're running. Damper is a press-on fit.

  • For internally balanced engines
  • Durable nodular iron construction
  • High temperature elastomer bond
  • Engraved timing marks every 90° 
  • Includes 60° of easy-to-read timing marks 
  • Rated to 10,000 RPM
  • NOT SFI approved

910-15363 Instructions (PDF) 

Technical Notes (PDF) 

Fluidampr Balancers 620101 Small Block Chevy Crank Damper, 6.25 Inch
(Part #755712615)
                        

Eliminates crankshaft breaks, reduces wear on main bearings and increases horsepower. Fits 262-350 Small Block Chevy 1955-up (will not fit '92-up LT1). Internal balanced. 

  • 6-1/4" diameter
  • 7.9 lbs.
  • Steel housing
  • Black zinc chromate finsih
Speedway Chrome SB Chevy 350 Fluid Crank Damper, 6.25 Inch
(Part #91015330)
                        

Chrome plated steel balancer for S/B Chevy 350 c.i. V-8. Degreed from 10° ATDC to 50° BTDC. SFI serial number and timing marks are etched on the outer ring.

  • Forged from 1025 low carbon steel  
  • Injected with high viscosity silicone fluid
  • Rated to 12,500 RPM
  • SFI 18.1 certified
Speedway Small Block Chevy 350 Fluid Crank Damper, 6.25 Inch
(Part #91015342)
                        

Balancer for Small Block Chevy 350 c.i. V-8. Degreed from 10o ATDC to 50o BTDC.  SFI 18.1 certified.

Professional Products Small Block Chevy 6 Inch Harmonic Balancer, SFI
(Part #91090010)
                        

This is a SFI certified 6" internally balanced Small Block Chevy harmonic balancer. It has 60 timing marks plus engraved marks every 90 degrees.

  • 18.1 SFI Rating
  • Steel
  • Painted
  • Sold Individually 

 

Mr Gasket 1588 Timing Tape, 6-3/4 Inch Balancer
(Part #5501588)
                        A convenient way to avoid the expense of having the harmonic balancer degreed. This timing tape is precisely accurate in calibration. Use it for accurate timing, setting valve lash or when degreeing the harmonic balancer. For S/B Chevy V8 engines.
                    
ARP Fasteners 234-2501 Small Block Chevy Balancer Bolt & Washer
(Part #1012342501)
                        Made from 8740 chromoly. Bolt feature increased diameter for improved accessibility and easy wrenching. Hardened parallel ground washer prevents galling while promoting even torque loading. 170,000 PSI. 

  • For S/B Chevy
  • UHL - 2.470"
  • Thread Size - 7/16-20
  • Wrenching - 13/16"
  • Washer Included
Aluminum Lower Pulley Screw Kit, Coarse Thread
(Part #91015442)
                        

Set of three Allen bolts for lower aluminum water pump pulley.

  • Coarse Thread