Provides oil from external dry sump oil pumps. With AN 10 fitting for supplying oil to the small block Chevy engine from the oil pump. Eliminates need to machine block for oil inlet fittings. Fits Small Block Chevy.
Connects directly to the oil cooler. Eliminates the need for a remote filter mount and a cooler adapter on the block. Designed to pass oil through filter before it goes to the cooler. Uses Chevy filters. AN 10 fittings. Fits Small Block Chevy.
Lets you use popular long-style Chevy oil filters by placing them at a 90 degree angle. Provides greater ground clearance Allows use of 2-quart truck oil filter Fits Small Block Chevy
Fits 13/16"-16 threads. Designed to fit most small and big block Chevy V8's with recessed filter landing. 2-1/8" thick 1/2" NPT ports (1) qty. 1/4" O-ring Mounts oil filter with 13/16"-16 threads
Small Block Big Block Chevy and 90° V6 engine to Ford (1932-1948) Mercury (1939-1950) and Ford pick-up truck (1932-1952) transmission. Aluminum 1 piece bellhousing with pilot bearing adaptor. 3-5/8" thick.Note:Use 168 tooth (large) Chevy flywheel redrilled to accept Ford clutch. Use oldFord release bearing anda Chevy 1955-1961 style 3 bolt "bellhousing-mount" starter from a manual transmission car.720-0392 Instructions(PDF)
Fits 13/16"-16 threads. Designed to fit most small and big block Chevy V8's with recessed filter landing. 2-1/8" thick1/2" NPT ports(1) qty. 1/4" O-ringMounts oil filter with 13/16"-16 threads
Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount. Constructed of sturdy 3/8” thick hot ...
This is a stock adapter with a bypass built into it. Replacement for stock oil filter adapter. Fits Small Block Chevy Big Block Chevy and early model 4.3L V6. Replaces GM part number 3952301. Includestwo 5/16"-18x 1" socket head cap screws.Bolts directly to the block without a gasket.
This is a stock adapter with a bypass built into it. Replacement for stock oil filter adapter. Fits Small Block Chevy, Big Block Chevy, and early model 4.3L V6. Replaces GM part number 3952301. Includes two 5/16"-18 x 1" socket head cap screws. Bolts directly to the block without a gasket.
Hose mounting adapter for small block Chevy water pump block ports.
Provides oil from external dry sump oil pumps. With AN 10 fitting for supplying oil to the small block Chevy engine from the oil pump. Eliminates need to machine block for oil inlet fittings. Fits Small BlockChevy.
Connects directly to the oil cooler. Eliminates the need for a remote filter mount and a cooler adapter on the block.Designed to pass oil through filter before it goes to the cooler.Uses Chevy filters. AN 10 fittings. Fits Small Block Chevy.