Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Shop Speedway Parts At Speedway Motors

Speedway Motors is America's Oldest Speed Shop and has been a trusted source for specialty rodding and racing products and friendly expert advice for more then 60 years. With the customer in mind, Speedway Motors produces and sells high quality racing and rodding parts at affordable prices. With a name like Speedway, you can't go wrong.

Featured Products
  • Short Water Pump for Small Block Chevy, Satin Finish, Aluminum
    New
    Short Water Pump for Small Block Chevy, Satin Finish, Aluminum
    (Part #91015577)
    x
                
    Each pump is manufactured from T6 aluminum and features an impeller with curved vanes for maximum flow, pressure and equal distribution to both sides of the block. It also features a unique seal assembly for leak proof operation. 
    • 5/8" shaft with 5/8" fan pilot snout
    • 1/2" NPT hole on passenger side (for heater hose) and on top (for bypass hose)
    • Stamped steel rear plate
    • Extra thick fan hub
    • 5/8" bearings
    • Adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow rate and pressure rate
    • Weighs 6 lbs.
    • Does not have a set screw retaining the fan hub
    • Includes gaskets and hardware

    NOTE: This pump is designed for street use and is not to be run on a motor which exceeds 5,500 RPM. 

    910-15580 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article. SBC - Short vs Long Water Pump.  


  • Swedged Steel Tube for 5/8 Inch Heim
    From: $9.99
    Product Rating: 4.33 Stars
    New
    Swedged Steel Tube for 5/8 Inch Heim
    (Part #91034258)
    x
                These 5/8" swedged steel sleeves have a 7/8" O.D. tube, 0.065 wall, and 5/8" RH and LH fine threads. Available in 1" increments from 4" to 20". IMCA approved. Sold Each.
            
  • Jumbo Size Premium Tape
    From: $8.99
    Jumbo Size Premium Tape
    (Part #910809)
    x
                2" wide, 180' long, 11 mils thick. Colors available: red, blue, black, white, green, orange, purple, yellow. 
            
  • 1928-1929 Model A Roadster Door Latches, Pair
    1928-1929 Model A Roadster Door Latches, Pair
    (Part #91125002)
    x
                

    These Model A door latches are designed for roadsters without outside door handles and have the chrome arm that sticks up to open the door. They feature quality steel construction with a painted finish and can be used on all 1928-1931 roadsters if not using outside handles.

    • Steel Material
    • Painted Finish
    • Sold in pairs
  • 4 Inch Peep Mirror
    $14.99
    Product Rating: 4.12 Stars
    4 Inch Peep Mirror
    (Part #92550745)
    x
                Our 4" diameter peep mirror clamps to the top edge of the door. Fits over a door edge that is app. 1/8" thick or thinner. Fits right or left side (reversible). A popular and universal mirror at a low cost. Sold each.
            
  • Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    (Part #91031831)
    x
                

    Brass adapter.

    Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

  • Speedway Chevy Universal Aluminum Radiators
    Speedway Chevy Universal Aluminum Radiators
    (Part #917347)
    x
                

    Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

    These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

    • All-aluminum, furnace-brazed construction
    • No cheap epoxy glue or crimped in gaskets
    • Maximum amount of fins per inch allows greater heat transfer
    • Billet filler necks
    • Available in 22", 24", 28", or 31" widths (measurements include tanks)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

  • Speedway Plastic Gear Box
    $5.99
    Product Rating: 4.25 Stars
    Speedway Plastic Gear Box
    (Part #91681204)
    x
                Use to protect and identify quick change gear sets.
            

Filter

"Speedway" Page 1 of 50

Page 1 of 50

  • Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    (Part #91065042)
    x
                

    These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face.  The fuel sender comes with seal and and all mounting hardware.

    • 2-1/16”
    • Overall Diameter: 2.25"
    • Overall Length: 9.25"
    • Includes sender
    • 240 ohms empty, 33 ohms full
    • Stainless steel bezel
    • Backlit white face
    • Replacement light socket assembly available # 910-65071

    Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.

  • Pinstriped iPhone Cover - Gold
    Pinstriped iPhone Cover - Gold
    (Part #2921005)
    x
                Let us help you hot rod your iPhone 4.  These slick covers help to protect and customize your smart phone.
    • iPhone 4/4S only
    • Rugged aluminum back plate
    • Slimline rubber edging
  • French Grimes Racesaver Sprint 305 Chevy Brodix Cylinder Heads
    French Grimes Racesaver Sprint 305 Chevy Brodix Cylinder Heads
    (Part #2353050)
    x
                
    • Racesaver Sprint Series spec Brodix cylinder heads
    • Fully assembled
    • Heads are certified serial numbered
    • Ready and legal for use on a 305 c.i. Racesaver engine
  • 1954 Chevy Park Light Lens, Amber
    1954 Chevy Park Light Lens, Amber
    (Part #9115400)
    x
                These amber parking light lens for 1954 Chevy passenger cars feature  original   style lens pattering. They fit the factory housing    and are  a direct   replacement for your old damaged or missing park light    lens. 
    • Amber plastic lens with original style lens patterning 
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • Sold each
  • Stainless Steel Beauty Ring for 15 Inch GM Rally Wheel, 2.5 Inch Wide
    Stainless Steel Beauty Ring for 15 Inch GM Rally Wheel, 2.5 Inch Wide
    (Part #9101975)
    x
                Modeled after 70's GM factory equipped rally wheel beauty rings. They are designed to fit our GM Style Rally Wheels.
    • 15" x 2.5" stainless steel trim ring
    • For use on 7" wheels
    • Perfect finishing touch to our GM Style Rally Wheels
  • Speedway Extreme Gaskets, 2-1/2 Inch Collector Gaskets
    Speedway Extreme Gaskets, 2-1/2 Inch Collector Gaskets
    (Part #91013540)
    x
                
    • Reusable triple-layer gasket
    • Stainless steel with a heat-resistant, rubber-based inner core
    • 0.085” thick, ultra pliable
    • Easily conforms to surface irregularities to create a tight, leak-proof seal
  • 1949-1950 Chevy Chrome Tail Light Bezel with Red Reflector
    1949-1950 Chevy Chrome Tail Light Bezel with Red Reflector
    (Part #91149502)
    x
                These tail light bezels for 1949-1950 Chevy passenger cars replicate those of the original. They feature a chrome plated finish and the original style red reflectors. 
    • Chrome plated steel bezel
    • Has original style red reflector with "GUIDE" script
    • Duplicate of original
    • Left or Right Side
    • Fits All Passenger Cars
  • Speedway Classic 12 Inch Black Steering Wheel w/ Holes
    Speedway Classic 12 Inch Black Steering Wheel w/ Holes
    (Part #91032749)
    x
                

    Smooth black cushion with chrome spokes. Has the common 3 bolt pattern mount.  Wheels feature rubber steering wheel grip.  Chrome center cap is included.

    • Smooth black cushion
    • 3 bolt pattern mount
    • Steel
    • Chrome cap included

    Note: These steering wheels require addtional purchase of a horn button retainer, not included with steering wheel.  We offer our corresponding retainer (41010112) and various adapter kits for your specific application. 

     

  • Speedway Shock Wrench, QA1 Big Body
    $59.99
    $99.99
    Speedway Shock Wrench, QA1 Big Body
    (Part #9161000)
    x
                
    • CNC machined aluminum
    • Extra long handles for maximum leverage
  • 1970-74 Challenger / Cuda Fuel Sending Unit, 3/8 Inch Outlet
    1970-74 Challenger / Cuda Fuel Sending Unit, 3/8 Inch Outlet
    (Part #91010244)
    x
                These quality fuel sending units are designed as  replacements for 1970-74 Dodge Challenger & Plymouth Cuda.  Will work with factory  style fuel level gauges.
    • 70-74 CHALLENGER & CUDA
    • 3/8" OUTLET
    • OEM Replacement fuel sender/pickups
    • Designed for use with factory fuel level gauge

    LH/RH Swing Guide (Link)

    Ohms Chart (Link)

  • Mini Sprint LF Torsion Arm
    $39.99
    Mini Sprint LF Torsion Arm
    (Part #9609005)
    x
                
    • I beam design
    • 2024 material
    • Two tone finish
    • Includes pinch bolt
  • Tribute T Modified Split Wishbones
    Tribute T Modified Split Wishbones
    (Part #71545127)
    x
                It doesn't get much more traditional than running a  set of split wishbones. These split bones are all new with forged front yokes just  like Henry built them and fit a 2-1/4" axle boss. Modified 5/8" spring  perch boss as used on our Tribute-T kit.
    • 40-3/4" from the front perch bolt centerline to the end of the 11/16"-18 threaded rear bung
    • 5/8" sleeved bore behind axle to allow for spring perch mounting
    • Material thickness is 12 GA (0.1046")
    • Fully boxed
  • 2-1/2 Inch Rear Spring Shackles
    2-1/2 Inch Rear Spring Shackles
    (Part #91033326)
    x
                
    • For 2.5" wide leaf springs
    • 1" bushing
    • 2.5" center to center
    • Sold as a pair
  • 3/8 X 3/8 Clevis
    $7.99
    3/8 X 3/8 Clevis
    (Part #6680116)
    x
                The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115). 
            
  • Spindle Nuts for Mustang II Spindle
    Spindle Nuts for Mustang II Spindle
    (Part #91631936)
    x
                

    These spindle nuts are for your Mustang II Spindle. They are a combination of a castle nut and a washer.

    • Includes Cotter Pin
    • Sold as Pair
    • Combination of castle nut and washer
  • Speedway Tire Coaster Set
    $4.99
    Product Rating: 4.78 Stars
    Speedway Tire Coaster Set
    (Part #91019522)
    x
                
    • Made from 100% recycled tire rubber
    • Set of four
    • Four distinct designs in each set
      • Vintage Sprint Mag
      • Kustom Cross-bar Flipper Cap
      • D-hole Stock Car Wheel
      • Redline 5 Spoke Mag
  • Heater Core for 1965-67 Ford Galaxie and Custom Passenger Car
    Heater Core for 1965-67 Ford Galaxie and Custom Passenger Car
    (Part #910399001)
    x
                For your 1965-67 Ford / Mercury passenger car, use a 100% new heater core,   not a marginal   recore like others sell. All heater cores are a   direct fit  factory replacement for applications without A/C. 
    • All new construction
    • Direct fit factory replacement for 1965-67 Ford Galaxie and Custom
    • Please note: non air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • Mikise Power Pic Filter Cleaner Spout
    Mikise Power Pic Filter Cleaner Spout
    (Part #910606420)
    x
                

    New economy air filter cleaner to clean your air filter from the inside out.  Hooks to a standard garden hose to direct multiple high pressure sprays streams where needed.

    • Clean your air filter from the inside out
    • Hooks to a standard garden hose
  • Bare 60 Inch Centered 9 Inch Ford Housing
    Bare 60 Inch Centered 9 Inch Ford Housing
    (Part #91046115)
    x
                

    Our economical 9" Ford rear axle housing features a reclaimed center section, new 3" axle tubes, and new-style Ford ends. Total track width is 60" from hub-to-hub. You will need one 28-3/8" long axle and one 30-5/8" long axle.   Includes 8 T-bolts for the axle bearing retainer plates and 10 studs for the 3rd member.

    Third member sold separately.

     

  • Deluxe 45 Degree Brake Flaring Tool
    Deluxe 45 Degree Brake Flaring Tool
    (Part #91170081)
    x
                
    • Easily form 45-degree double, single and bubble flares in OE steel, stainless steel and soft metal tubing
    • For use with 3/16"-, 1/4"-, 5/16"- and 3/8"-diameter lines
    • Turret-style design allows you to make those precision flares in minimal time
    • All the brake-flaring forming dies you need are mounted right on the turret
    • T-handle screw clamp securely holds your line in place during forming
    • Vise-mounted
    • Packaged in a blow-molded case

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.



Goto Previous PagePrevious Page
1 2 3 4 5 ... 50