Browse our winning racing and performance auto parts.MORE
Speedway Motors is America's Oldest Speed Shop and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 60 years. With the customer in mind, Speedway Motors produces and sells high quality racing and rodding parts at affordable prices. With a name like Speedway, you can't go wrong.
These hub covers are garage sale priced because 2 are 5 on 4-3/4 and the other 2 are 5 on 5.
No Warranty, No Returns On Garage Sale Items
Works great on most steel wheels to give you the cool look. Chrome steel construction. Set of four.
Body shims are important when installing panels. This shim is 1.25" x 1.125 x 1/16" thick and a 3/8" slot. Sold each.
- 1/16" overall thickness
- 1.25" x 1.125 x 1/16"
- Sold each
- Camaros & Classics part number 10-0162830
Our 4" diameter peep mirror clamps to the top edge of the door. Fits over a door edge that is app. 1/8" thick or thinner. Fits right or left side (reversible). A popular and universal mirror at a low cost. Sold each.
Item DetailsFits RH & LH
Lets you adapt most Holley 4 bbl. carbs to a Quadra-Jet intake manifold (and vice-versa). Includes a Quadraget base gasket, a Holley base gasket, and mounting hardware. Adapter is .7255" thick.
- Fits Holley 4 Barrel Carburetors
- Tapered open center
- .7255" thick spacer
Not all carb spacers are created equal! These are not just a cheap "fits all" parts. Our billet aluminum carburetor spacers are CNC machined to fit your manifold perfectly.
- Gain up to 17 horsepower over competing adaptors
- 1" tall
Item Details4412 Holley to Dual Plane (Perfomer & RPM)
This tri-powered factory replacement linkage set for Rochester carbs includes ball bearing joints and new carb throttle body shaft. This linkage kit is for carbs with a small base, 1-7/16 " butterflies. This throttle rod kit is designed to function as a progressive linkage with the center being the primary. It could be locked to work all 3 carbs at the same time if desired but would require correct internal carb components to avoid flooding out the engine during acceleration. Does not work with after market manifolds.
- Tri-powered factory replacement linkage set
- Ball bearing joints
- Progressive linkage with the center being the primary
- For Rochester carbs with a small base, 1-7/16 " butterflies
- Includes ball bearing joints and new carb throttle body shaft
- Designed to replace the vacuum linkage on factory GM Tri Power setups such as '58-'61 Chevys and Pontiacs
- Includes a new throttle shaft for the center (primary) carb
- Linkage connects to the passenger side of the engine
- Does not work with after market manifolds
135-6681 Instructions (PDF)
Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.
Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.
These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.
- 1/4 Inch-28 NF Fine Thread
- Sold in bags of six nuts.
- Choose left or right thread.
This tray allows you to keep your valve train components organized and mated during assembly or disassembly. Lightweight plastic tray features individual compartments that allow you to store rocker arms, pushrods, valve springs and most other valve train items.
23-1/4" x 12-3/8" x 1-5/8"
Speedway IMCA approved non-beadlock 15 inch wheels at an affordable price. This 5 on 5 inch wheel weighs 20.5 pounds. They do not come with a beadlock ring. These durable wheels are lightweight, yet strong enough for 3500 lbs. stock car.
- 15 Inch Wheel
- 5 on 5" bolt pattern
- 15" x 8"
- Weigh 20.5lbs
- 5/8" stud hole
- IMCA approved
- Black painted finish
- Lightweight, yet strong enough for 3500 lbs. stock car
- Choose: 2", 3", or 4" backspace
Save money without sacrificing quality with these steel circle-track 15 inch wheels from Speedway Motors. The 15" x 10" wheels have a 5-on-5" bolt pattern and are available with 2", 3", or 4" backspacing.
- 15 Inch Wheel
- 10 Inch Width
- 5 on 5 Inch Bolt Pattern
- Great value
- Quality construction
- Durable black powder coat finish
- Not IMCA certified
Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.
You always need to find the correct length for your push rods when you build an engine. Having the wrong length changes the geometry of the valve train and decreases horsepower while increasing wear.
- Adjustable to fit several engines
- Enables you to arrive at correct pushrod length and correct valve train geometry
- Minimum length is 7.5" and maximum length is 8.7"
- Includes two per package (check both intake and exhaust)
- 5/16" diameter
Item DetailsS/B Chevy
B/B Chevy Intake
These universal lights are a great addition to your hot rod, street rod or custom application. The red lens and double filament bulb makes them useful as a tail light, third brake light or turn signal. Chrome housing measures 2-1/2" long and 1-3/4" wide. Wires feed through a 3/8” bolt that threads into the main housing. The chrome washer and rubber washer are 7/8” O.D. This accessory light uses double filament replacement bulb 316-2012.
- Works as a taillight, brake light or turn signal
- 2-1/2" x 1-3/4" housing
- Chrome plated
- Uses special compact 1157-style dual filament bulb
- Works with 12 volt systems
- Draws 3 amps
These triple chome plated bumpers are designed to replace your old, rusted, bent, or missing 1934 Ford passenger car bumpers. They fit both front and rear.
- Original style replacement
- 1934 Ford passenger cars
- Triple chrome plated
- Fits both front and rear
- Overall length is 62-3/8"
- Overall height of bumper surface is 3-1/2"
During the rigorous conditions of a race it's important to feel safe and comfortable. Speedway offers these rugged, form fitting aluminum pads that offer extra protection to your knees from the steering box. Will work on any Steering Gear or Chassis.
- Aluminum construction
- Form fitting
- Works on any steering gear or chassis
- Sold each
These 24" wrap around axle straps are great for secure trailering. Straps sold each and available in black, blue, purple, red or yellow.
These tie downs are rated at 5,000 lb. breaking strength and 1,666 lb. working load limit. Measures 2" wide.
Removes excess oil from the crankshaft to improve top end horsepower and reduce windage. Fits Small Block Chevy. Mounts to the starter side of the block.
Slight trimming may be required. For best results, trim to within .045" of the rods and counterweights.
Kit Contains: nine pinion retainer shims consisting of one each .005", .006", .0075", .0082", two .004", and three .0105"; twelve pinion pre-load shims consisting of one each .005", .006", .0075", .0082", .009", .020", .030", two .050", and three .010"; one pinion spacer .375" thick; and one 3/4"-20 Ford pinion nut.
Add some visual attitude to your rear axle with these chrome differential covers. They're stamped from heavy-gauge steel to ward off those pesky oil leaks, and chrome plated for long lasting good looks.
GM 10-Bolt 7.5 Inch Rearend Differential Cover
- Approximately 10-3/4" side to side
- Approximately 10" up and down
- It has a squared off oval shape
- Mounts with 10 bolts
- Many 1978-Up GM midsize cars
- 1982-Up Camaro/Firebird
- S-10/S-15 pickups
Keep the air entering your engine clean with our chrome plated steel air cleaners. They feature a recessed base and have a 6-3/8 in. diameter. These air cleaners have a chrome plated steel housing with a paper filter element.
6-3/8 Inch Chrome Air Cleaner, 2 Barrel Carb.
- Chrome plated steel
- 6-3/8" diameter and 2-1/2" tall filter element
- Fits 2 barrel carbs with 2-5/8" neck
- includes stud and wing nut
- non-restricting flame retardant filter
- unique sculptured design to fit most applications
- performance engineered for increased breathing
- designed to perform with todays large displacement engines
Does not fit 1968 and later cars equipped with factory air temperature control valve.
Item Details2 bbl carb
Heat-treated steel header bolts with a zinc finish. Features a hex head with 3/8"-16 x 3/4" threads. Perfect for use with headers on AMC 290-401, small block Chevy 262-400, big block Chrysler 383-400 (exc. 426 Hemi), Pontiac 326-455, and Oldsmobile 330-455.
Set of 12 bolts.
Unique, classic-stye 3-piece design made of cast brass. Fits 1926-1927 Model T roadsters for an original look. Also for use on the Speedway Track-T Roadster kit. Windshield glass (not included) easily siliconed into the milled grooves. Glass template included.
The famous DuVall windshield is most unique windshield frame on the market today. The DuVall name is trademarked by Speedway Motors, so you know you are getting the real thing! Frame is constructed of solid, cast brass which can be polished, painted, or plated. A classic finishing touch to any 1932 Ford street rod.
Includes 5 ft. of black piping which mounts between the body and the winshield frame. Glass not included.
555-32600 Instructions (PDF)
These windshield rubber seals fit between the windshield frame and body. They are not supplied with our windshield frames. Designed for 1932-39 Ford Roadster, Phaeton and other open top cars.
- Fit between the windshield frame and body
- 1932-39 Ford Roadster, Phaeton and other open top cars
- Not supplied with our windshield frames
- "T" Style rubber
- 3/16" wide at top, 1" tall
- 8 foot piece