Speedway Motors is America's Oldest Speed Shop and has been a trusted source for specialty rodding and racing products and friendly expert advice for more then 60 years. With the customer in mind, Speedway Motors produces and sells high quality racing and rodding parts at affordable prices. With a name like Speedway, you can't go wrong.
Air and Fuel Delivery
Driveline and Axles
Tire and Wheel
Electrical, Lighting and Body
Fittings and Hose
Electrical, Charging and Starting
Electronics and Telematics
Accessories and Fluids
Fasteners and Hardware
Apparel and Gifts
Wiper and Washer
$239.99More InfoNew1951-1954 Chevy Power Brake Booster Firewall Mount Kit(Part #9101951)x
Check out this 1951-1954 Chevy Power Brake Booster Mount Kit. Install this firewall-mount power brake kit on your classic Chevy.
- Bolt-in installation
- Mounts booster using original firewall access panel opening
- Complete your installation with 910-31445 dual master cylinder, brake booster and pedal pad.
From: $9.99More InfoNewSwedged Steel Tube for 5/8 Inch Heim(Part #91034258)x
These 5/8" swedged steel sleeves have a 7/8" O.D. tube, 0.065 wall, and 5/8" RH and LH fine threads. Available in 1" increments from 4" to 20". IMCA approved. Sold Each.
From: $8.99More InfoJumbo Size Premium Tape(Part #910809)x
2" wide, 180' long, 11 mils thick. Colors available: red, blue, black, white, green, orange, purple, yellow.
$14.99More Info4 Inch Peep Mirror(Part #92550745)x
Our 4" diameter peep mirror clamps to the top edge of the door. Fits over a door edge that is app. 1/8" thick or thinner. Fits right or left side (reversible). A popular and universal mirror at a low cost. Sold each.
$2.99More InfoStraight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter(Part #91031831)x
Straight 3/8"-24 IFF to 1/8" NPT Male Adapter
From: $115.99More InfoSpeedway Chevy Universal Aluminum Radiators(Part #917347)x
Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.
These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.
- All-aluminum, furnace-brazed construction
- No cheap epoxy glue or crimped in gaskets
- Maximum amount of fins per inch allows greater heat transfer
- Billet filler necks
- Available in 22", 24", 28", or 31" widths (measurements include tanks)
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.
$5.99More InfoSpeedway Plastic Gear Box(Part #91681204)x
Use to protect and identify quick change gear sets.
$3,999.99$4,409.99More InfoNew1935-40 Bolt Together Chassis Kit with MII-IFS and Coil-Over Rear Suspension(Part #9101940)x
This complete front and rear independent suspension kit contains everything you need to build a great foundation for your fat-fendered 1935-1940 Ford. There is no welding required and all components bolt together.
- Pair of 11 gauge frame rails
- Speedway exclusive Bolt together center X-member
- Bolt-On Mustang II Crossmember assembly
- Rear frame cross support
Also Includes - Bolt-On triangulated rear four-bar kit!
- New 56” wide 9” Ford housing with all mounts welded
- 4-link kit
- Coil-over assemblies
- 1935-40 Ford Frame Rails (91603540): Laser cut C-channel frame rails welded on a rail fixture to ensure correct curvature with all OEM holes pre-drilled for ease of assembly.
- 1935-40 Ford Bolt-In Tubular X-member (91063540): Designed for stoc, original 1935-40 Ford frames and made of 1-1/2" O.D. .095" wall steel tubing. Includes bolt-in boxing plates, drop-out transmisson mount, brake pedal and booster/master cylinder mount and hardware. Accepts standard GM automatic transmission mounting as well other popular transmissions and works with 2" exhaust tubing.
91063540 Instructions (PDF)
- Bolt-in Brake Pedal Kit (91073540): Designed for use with our OEM replacement Tubular X-member for 1935-40 Fords.
- 1935-40 Ford Bolt-In Rear Frame Cross Support (91083540): Bolt in channeled rear support and gussets for '35-'40 Ford cars. Includes a crossmember and the bolts to attach it.
910-83540 Instructions (PDF)
- Bolt-In 1935-40 Ford Mustang II Crossmember (91043540): Completely bolt-in with no welding required, these crossmembers are based on the proven Mustang II geometry. They feature bolt-in boxing plates to reinforce the frame with an interlocking design for ultimate strength. Provides a ride height of approximately 3"-4" lower than stock with threaded adjusters to fine tune the height. Full lower A-arms are required with this crossmember.
Note: This crossmember must be used with the non-strut rod type lower control arms. As designed, it will not work with stock type or the O/E type lower control arms that make use of a strut rod.
- AFCO 23250CR 10 Inch Extreme Chrome Coil-Over Spring, 250 Rate (10623250CR): High quality chrome finish looks great from any angle - not just on the outside edge. Built with industry exlusive 360° polished wire and carries a lifetime warranty to remain within 2% of the original nominal free height.
- QA1 US402 Adjustable Shock and Coilover Kit w/o Spring, 12 Inch (7214855): These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Comes with steel coilover sleeves for the shock eyes to fit 1/2" bolts or 5/8" bolts. Features: - Billet aluminm body, - 5/8" centerless ground, hard chrome plated solid piston rod, - Deflective Disc Valving, - 3-step sealing system, - 18-position adjuster knob changes the rebound valving, - Allows suspension control in one easy-to-reach location, - 100% dyno tested and serialized, -Revalvalveable and rebuildable by QA1 authorized service centers
- Bolt-In 1935-40 Ford Triangulated Four-Bar Rear Suspension Kit (91003540): Allows you to assemble a complete frame and suspension using only basic hand tools and a drill. Will greatly improve both the ride quality and handling. Features: New 9" Currie 56" long housing with welded brackets, Chromoly four bars with urethane bushings, 11" steel bodied coil-over shocks. Allows for a maximum tire width of 8" if used with stock '35-'40 Ford fenders.
"Speedway" Page 1 of 50
Page 1 of 50
$29.99More InfoSpeedway Fuel Level Gauge with Sender, 2-1/16 Inch(Part #91065042)x
These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face. The fuel sender comes with seal and and all mounting hardware.
- Overall Diameter: 2.25"
- Overall Length: 9.25"
- Includes sender
- 240 ohms empty, 33 ohms full
- Stainless steel bezel
- Backlit white face
- Replacement light socket assembly available # 910-65071
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.
$29.99More InfoPinstriped iPhone Cover - Gold(Part #2921005)x
Let us help you hot rod your iPhone 4. These slick covers help to protect and customize your smart phone.
- iPhone 4/4S only
- Rugged aluminum back plate
- Slimline rubber edging
$1,585.99More InfoFrench Grimes Racesaver Sprint 305 Chevy Brodix Cylinder Heads(Part #2353050)x
- Racesaver Sprint Series spec Brodix cylinder heads
- Fully assembled
- Heads are certified serial numbered
- Ready and legal for use on a 305 c.i. Racesaver engine
$5.99More Info1954 Chevy Park Light Lens, Amber(Part #9115400)x
These amber parking light lens for 1954 Chevy passenger cars feature original style lens pattering. They fit the factory housing and are a direct replacement for your old damaged or missing park light lens.
- Amber plastic lens with original style lens patterning
- Fits factory housing
- Left or Right Side
- Fits All Passenger Cars
- Sold each
$18.99$19.99More InfoStainless Steel Beauty Ring for 15 Inch GM Rally Wheel, 2.5 Inch Wide(Part #9101975)x
Modeled after 70's GM factory equipped rally wheel beauty rings. They are designed to fit our GM Style Rally Wheels.
- 15" x 2.5" stainless steel trim ring
- For use on 7" wheels
- Perfect finishing touch to our GM Style Rally Wheels
$6.99$7.99More InfoSpeedway Extreme Gaskets, 2-1/2 Inch Collector Gaskets(Part #91013540)x
- Reusable triple-layer gasket
- Stainless steel with a heat-resistant, rubber-based inner core
- 0.085” thick, ultra pliable
- Easily conforms to surface irregularities to create a tight, leak-proof seal
$44.99More Info1949-1950 Chevy Chrome Tail Light Bezel with Red Reflector(Part #91149502)x
These tail light bezels for 1949-1950 Chevy passenger cars replicate those of the original. They feature a chrome plated finish and the original style red reflectors.
- Chrome plated steel bezel
- Has original style red reflector with "GUIDE" script
- Duplicate of original
- Left or Right Side
- Fits All Passenger Cars
$30.99More InfoSpeedway Classic 12 Inch Black Steering Wheel w/ Holes(Part #91032749)x
Smooth black cushion with chrome spokes. Has the common 3 bolt pattern mount. Wheels feature rubber steering wheel grip. Chrome center cap is included.
- Smooth black cushion
- 3 bolt pattern mount
- Chrome cap included
Note: These steering wheels require addtional purchase of a horn button retainer, not included with steering wheel. We offer our corresponding retainer (41010112) and various adapter kits for your specific application.
$59.99$99.99More InfoSpeedway Shock Wrench, QA1 Big Body(Part #9161000)x
- CNC machined aluminum
- Extra long handles for maximum leverage
$95.99$119.99More Info1970-74 Challenger / Cuda Fuel Sending Unit, 3/8 Inch Outlet(Part #91010244)x
These quality fuel sending units are designed as replacements for 1970-74 Dodge Challenger & Plymouth Cuda. Will work with factory style fuel level gauges.
- 70-74 CHALLENGER & CUDA
- 3/8" OUTLET
- OEM Replacement fuel sender/pickups
- Designed for use with factory fuel level gauge
LH/RH Swing Guide (Link)
Ohms Chart (Link)
$39.99More InfoMini Sprint LF Torsion Arm(Part #9609005)x
- I beam design
- 2024 material
- Two tone finish
- Includes pinch bolt
$399.99More InfoTribute T Modified Split Wishbones(Part #71545127)x
It doesn't get much more traditional than running a set of split wishbones. These split bones are all new with forged front yokes just like Henry built them and fit a 2-1/4" axle boss. Modified 5/8" spring perch boss as used on our Tribute-T kit.
- 40-3/4" from the front perch bolt centerline to the end of the 11/16"-18 threaded rear bung
- 5/8" sleeved bore behind axle to allow for spring perch mounting
- Material thickness is 12 GA (0.1046")
- Fully boxed
$24.99More Info2-1/2 Inch Rear Spring Shackles(Part #91033326)x
- For 2.5" wide leaf springs
- 1" bushing
- 2.5" center to center
- Sold as a pair
$7.99More Info3/8 X 3/8 Clevis(Part #6680116)x
The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115).
$12.99More InfoSpindle Nuts for Mustang II Spindle(Part #91631936)x
These spindle nuts are for your Mustang II Spindle. They are a combination of a castle nut and a washer.
- Includes Cotter Pin
- Sold as Pair
- Combination of castle nut and washer
$4.99More InfoSpeedway Tire Coaster Set(Part #91019522)x
- Made from 100% recycled tire rubber
- Set of four
- Four distinct designs in each set
- Vintage Sprint Mag
- Kustom Cross-bar Flipper Cap
- D-hole Stock Car Wheel
- Redline 5 Spoke Mag
$85.99$106.99More InfoHeater Core for 1965-67 Ford Galaxie and Custom Passenger Car(Part #910399001)x
For your 1965-67 Ford / Mercury passenger car, use a 100% new heater core, not a marginal recore like others sell. All heater cores are a direct fit factory replacement for applications without A/C.
- All new construction
- Direct fit factory replacement for 1965-67 Ford Galaxie and Custom
- Please note: non air applications
Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock.
$19.99More InfoMikise Power Pic Filter Cleaner Spout(Part #910606420)x
New economy air filter cleaner to clean your air filter from the inside out. Hooks to a standard garden hose to direct multiple high pressure sprays streams where needed.
- Clean your air filter from the inside out
- Hooks to a standard garden hose
$324.99More InfoBare 60 Inch Centered 9 Inch Ford Housing(Part #91046115)x
Our economical 9" Ford rear axle housing features a reclaimed center section, new 3" axle tubes, and new-style Ford ends. Total track width is 60" from hub-to-hub. You will need one 28-3/8" long axle and one 30-5/8" long axle. Includes 8 T-bolts for the axle bearing retainer plates and 10 studs for the 3rd member.
Third member sold separately.
$239.99More InfoDeluxe 45 Degree Brake Flaring Tool(Part #91170081)x
- Easily form 45-degree double, single and bubble flares in OE steel, stainless steel and soft metal tubing
- For use with 3/16"-, 1/4"-, 5/16"- and 3/8"-diameter lines
- Turret-style design allows you to make those precision flares in minimal time
- All the brake-flaring forming dies you need are mounted right on the turret
- T-handle screw clamp securely holds your line in place during forming
- Packaged in a blow-molded case
Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.