Speedway Motors is America's Oldest Speed Shop and has been a trusted source for specialty rodding and racing products and friendly expert advice for more then 60 years. With the customer in mind, Speedway Motors produces and sells high quality racing and rodding parts at affordable prices. With a name like Speedway, you can't go wrong.
Accessories and Fluids
Air and Fuel Delivery
Apparel and Gifts
Driveline and Axles
Electrical, Charging and Starting
Electrical, Lighting and Body
Electronics and Telematics
This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.
Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.
- Mainfuse box base is 1-7/8" x 3-11/16"
- Box height is 3-3/4"
Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.
These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.
- All-aluminum, furnace-brazed construction
- No cheap epoxy glue or crimped in gaskets
- Maximum amount of fins per inch allows greater heat transfer
- Billet filler necks
- Available in 22", 24", 28", or 31" widths (measurements include tanks)
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.
Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!
These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.
910-48345 Instructions (PDF)
Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H fuse block holds 18 standard push-in fuses and can be mounted almost anywhere.
Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.
- Harness has 20 circuits, of which 18 are fused
- Taillight leads measure 17' long
- Includes plug for GM column, headlight switch, dimmer switch, and signal flashers
"Speedway" Page 1 of 25
$119.99More InfoStainless Steel Battle Bars, Left Side, Standard RailSKU-91073081x
Stainless steel battle bars will fit any sprint car chassis, and great for short track, wheel banging action.
$29.99More InfoSpeedway Fuel Level Gauge with Sender, 2-1/16 InchSKU-91065042x
These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face. The fuel sender comes with seal and and all mounting hardware.
- Overall Diameter: 2.25"
- Overall Length: 9.25"
- Includes sender
- 240 ohms empty, 33 ohms full
- Stainless steel bezel
- Backlit white face
- Replacement light socket assembly available # 910-65071
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.
$29.99More InfoPinstriped iPhone Cover - GoldSKU-2921005x
Let us help you hot rod your iPhone 4. These slick covers help to protect and customize your smart phone.
- iPhone 4/4S only
- Rugged aluminum back plate
- Slimline rubber edging
$1,585.99More InfoFrench Grimes Racesaver Sprint 305 Chevy Brodix Cylinder HeadsSKU-2353050x
- Racesaver Sprint Series spec Brodix cylinder heads
- Fully assembled
- Heads are certified serial numbered
- Ready and legal for use on a 305 c.i. Racesaver engine
$16.99More InfoRocker Arm Balls for 7/16 Inch StudSKU-57583530x
Replacement rocker arm pivot balls with oil slots. Comes in a set of 16 for use with 7/16" rocker arm studs.
$59.99More Info1982-95 Ford 302, 164 Tooth FlexplateSKU-57530202x
- SFI approved
- .035 thicker than stock
- High tensile chromoly steel
- Designed and built for racing
- Manufactured to exceed OEM specs
- Double welded ring gears to withstand the RPM and stress of high stall converters
$29.99More InfoGM 5.3/6.0 Truck Exhaust Flanges, Mild Steel, 2.25 InchSKU-9160002x
$9.99More InfoSpring Assortment - 200 PieceSKU-91005200x
200 piece spring assortment. Comes with plastic case.
- Multipurpose spring assortment
- Compression & extension
- 200 pieces
$6.99$7.99More InfoSpeedway Extreme Gaskets, 2-1/2 Inch Collector GasketsSKU-91013540x
- Reusable triple-layer gasket
- Stainless steel with a heat-resistant, rubber-based inner core
- 0.085” thick, ultra pliable
- Easily conforms to surface irregularities to create a tight, leak-proof seal
$94.99More InfoBasket Rear BumperSKU-91073078x
Unpolished stainless steel rear "basket" bumper for sprints. Made from 1.00" O.D. tubing.
$30.99More InfoSpeedway Classic 12 Inch Black Steering Wheel w/ HolesSKU-91032749x
Smooth black cushion with chrome spokes. Has the common 3 bolt pattern mount. Wheels feature rubber steering wheel grip. Chrome center cap is included.
- Smooth black cushion
- 3 bolt pattern mount
- Chrome cap included
Note: These steering wheels require addtional purchase of a horn button retainer, not included with steering wheel. We offer our corresponding retainer (41010112) and various adapter kits for your specific application.
$59.99$99.99More InfoSpeedway Shock Wrench, QA1 Big BodySKU-9161000x
- CNC machined aluminum
- Extra long handles for maximum leverage
$599.99More InfoBolt-In 1947-54 Chevy Pickup Mustang II CrossmemberSKU-91044754x
Our bolt-in Mustang II suspension kit for 1947-1954 Chevy half-ton and 3/4 ton pickups includes all hardware and instructions.
- Completely bolt in - no welding required
- Based on proven Mustang II geometry
- Complete with bolt in boxing plates to reinforce the frame
- Interlocking design for ultimate strength
- Threaded adjusters to fine tune ride height
- Full lower A-arms required with this crossmember (strutless type)
- Requires the use of a power rack and pinion and tubular control arms
- NOT for use with air ride
910-44754 Instructions (PDF)Note: Use bolt-in motor mount kit 910-54754 to mount your S/B Chevy.
$39.99More InfoMini Sprint LF Torsion ArmSKU-9609005x
- I beam design
- 2024 material
- Two tone finish
- Includes pinch bolt
$399.99More InfoTribute T Modified Split WishbonesSKU-71545127x
It doesn't get much more traditional than running a set of split wishbones. These split bones are all new with forged front yokes just like Henry built them and fit a 2-1/4" axle boss. Modified 5/8" spring perch boss as used on our Tribute-T kit.
- 40-3/4" from the front perch bolt centerline to the end of the 11/16"-18 threaded rear bung
- 5/8" sleeved bore behind axle to allow for spring perch mounting
- Material thickness is 12 GA (0.1046")
- Fully boxed
$24.99More Info2-1/2 Inch Rear Spring ShacklesSKU-91033326x
- For 2.5" wide leaf springs
- 1" bushing
- 2.5" center to center
- Sold as a pair
$7.99More Info3/8 X 3/8 ClevisSKU-6680116x
The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115).
$12.99More InfoSpindle Nuts for Mustang II SpindleSKU-91631936x
These spindle nuts are for your Mustang II Spindle. They are a combination of a castle nut and a washer.
- Includes Cotter Pin
- Sold as Pair
- Combination of castle nut and washer
$23.99More InfoStainless Steel Nylock Nut Kit, Fine ThreadSKU-94004176x
We now offer a full height self locking stainless steel nuts in fine thread in a plastic divider case with 25 (1/4") 20 (5/16") 20 (3/8") 15 (7/16") and 12 (1/2") nuts.
$4.99More InfoSpeedway Tire Coaster SetSKU-91019522x
- Made from 100% recycled tire rubber
- Set of four
- Four distinct designs in each set
- Vintage Sprint Mag
- Kustom Cross-bar Flipper Cap
- D-hole Stock Car Wheel
- Redline 5 Spoke Mag
$79.99More InfoFlathead 9 Inch Clutch Disc, 1-3/8 Inch 10-SplineSKU-91015653x
It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 9" clutch discs for the flathead V8.
These premium organic clutch friction discs are for use with flathead Ford V8 and work well with our long style pressure plate (part number 91015651).
Flathead 9 Inch Clutch Disc
- 1-3/8 Inch 10-Spline
- Early Ford Applications
T-5 and Adapter Tech Tips (Link)
$324.99More InfoBare 60 Inch Centered 9 Inch Ford HousingSKU-91046115x
Our economical 9" Ford rear axle housing features a reclaimed center section, new 3" axle tubes, and new-style Ford ends. Total track width is 60" from hub-to-hub. You will need one 28-3/8" long axle and one 30-5/8" long axle. Includes 8 T-bolts for the axle bearing retainer plates and 10 studs for the 3rd member.
Third member sold separately.
$209.99More Info1958-64 Chevy Full-size Car Brake Booster Combo, Disc/DrumSKU-91035864x
When you put modern disc brakes on the front of your 1958-1964 Chevy full-size car (Bel-Air, Biscayne, Impala), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for front disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all front disc brake conversions.
- 8" dual diaphragm booster
- 1" bore master cylinder
- GM style proportioning/metering combination valve
- Master cylinder has outlets on both sides for ease of plumbing
- Includes plugs for unused outlets on opposite side of master cylinder
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.
$29.99More Info1964-66 Chevy Pickup Switch Panel CoverSKU-91023664x
These billet aluminum switch panel covers are made to fit your 1964-1966 Chevy pickup truck dash. They are designed to fit in place of your switches for a new styled sleek look.
- Billet aluminum
- 1964-1966 Chevy Pickup
- Switch eliminator panel
$239.99More InfoDeluxe 45 Degree Brake Flaring ToolSKU-91170081x
- Easily form 45-degree double, single and bubble flares in OE steel, stainless steel and soft metal tubing
- For use with 3/16"-, 1/4"-, 5/16"- and 3/8"-diameter lines
- Turret-style design allows you to make those precision flares in minimal time
- All the brake-flaring forming dies you need are mounted right on the turret
- T-handle screw clamp securely holds your line in place during forming
- Packaged in a blow-molded case
Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.
$29.99More InfoStainless Steel Exhaust Bend, 90 Degree, 2-1/2 InchSKU-91013888x
Each pipe is expanded on one end to allow easy installation. 16-gauge T304 stainless material. Natural, uncoated finish.
$69.99More InfoSpeedway Electric Speedometer, 3-3/8 Inch DiameterSKU-91065051x
These electric speedometers are perfect for your rod or race project. They feature a white face with bold black lettering and a bright orange needle for quick monitoring. Our 0-160 mph speedometers also come with a stainless steel bezel and a complete installation kit.
- 3-3/8” body diameter
- 3-3/4 ” bezel
- Overall Diameter: 3-3/4"
- Body Length: 1.60"
- Stud Length: 1.00"
- Backlit white face with black lettering
- Orange needle
- 0-160 mph range
- Stainless steel bezel
- Includes installation kit
- SENDER NOT Included
- Replacement light socket assembly available # 910-65075
$199.99More InfoFab. Alum. LS/Vortec Valve Covers w/o Coil Stands, Satin AnodizedSKU-57520459x
Fully welded GM LS/Vortec Series fabricated valve covers feature a billet aluminum rail for increased strength. Covers include oil filler with cap. Coil stands have been removed for a smooth look. Includes silicone gaskets.
NOTE: These covers do not have provisions to mount the factory ignition coils in the OEM location. You will have to relocate the coils when using these covers.
$59.99$99.99More InfoSpeedway Shock Wrench, AFCO Big BodySKU-9161005x
- CNC machined aluminum
- Extra long handles for maximum leverage
$39.99More InfoStainless Steel Exhaust Bend, 90 Degree, 2-1/4 InchSKU-91013884x
$279.99$299.99More Info1934 Ford Car BumperSKU-9113401x
- Fits both front and rear
- 26 inches between bolts
$229.99$279.99More InfoUnder Dash AC UnitSKU-91000535x
Looking for a simple under-the-dash A/C cooling unit? This compact air conditioning control box is just 16" long 4.25" tall and 11" deep. This unit features two large 2" X 6" air vents in front with a three-speed blower motor and cooling control adjustment.
Note: This unit consists of the AC evaporator, duct assembly and blower motor for the under dash use. It will require the additional items of the compressor, hose kit, dryer and condenser to complete the A/C system.
$19.99More Info16 Piece Spacer Kit, 3/8 InchSKU-9601090x
Machined aluminum spacer offers clearance for rod ends. Kit includes 8-1/4", 4-1/2", 2-3/4", and 2-1".
$7.99More InfoSteel Lower Ball Joint Sleeve, K6145 StyleSKU-91034820x
Used to build or repair control arms. Fits 917-20039 lower.
$4.99More Info1932 Ford Interior Door EscutcheonSKU-91132335x
These are used on both the door handles and window crank handles.
- Polished stainless steel
- Inside handle escutcheons for 1932 passenger cars
- Sold Each
$399.99More InfoSpeedway 14 Sq. Ft. Micro/Mini Sprint Top Wing KitSKU-96077100x
Top off your Micro or Mini Sprint car with a top-quality, money-saving Micro / Mini Sprint Top Wing Kit from Speedway Motors.
Speedway’s new Micro / Mini Sprint Top Wing Kit is built from premium-quality aircraft aluminum to provide the strength and light weight demanded by top racers. The wing kit is easily assembled using countersunk rivets and features 54-inch offset sideboards and internal sliders. A quick-change wicker bill ensures easy adjustability between events; different wicker bill sizes are available separately. The Micro / Mini Sprint Top Wing Kit is economically priced under $400 and ships via standard UPS ground freight, saving you both time and money.
Speedway 14 Sq. Ft. Micro/Mini Sprint Top Wing Kit
- Premium aircraft aluminum
- 54" offset sideboards
- Countersunk rivets
- Internal sliders
- Quick change wicker bill
$49.99More Info55 Degree Steering Column Mount for T-Bucket KitSKU-7154255xThese mounts are the economical mounting solution for T-bucket steering columns. They are designed to be used in conjunction with our 1-3/4" diameter stainless or plain steel hot rod steering columns.
- Mount puts the steering column at a 55 degree angle to the firewall
- Fits all of our deluxe "T" bodies with the floor / firewall installed
- Designed to be used with a 1-3/4" diameter steering column
$16.99$20.00More InfoAluminum 105 Degree Hose ConnectorsSKU-9171003x
These 105° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.
$49.99More InfoBlack 6 Inch Aluminum High Flow Fuel Filter, Stainless ElementSKU-91011733x
Compact design offers weight savings over full size filter. Comes with stainless steel high-flow element. Can be cleaned and reused. Black anodized aluminum housing. Will handle fuel injection. NOT compatible with ethanol (E85)or high pressure diesel.
Available with AN6, AN8, AN10 or AN12 inlet/outlet.