Speedway Motors is America's Oldest Speed Shop and has been a trusted source for specialty rodding and racing products and friendly expert advice for more then 60 years. With the customer in mind, Speedway Motors produces and sells high quality racing and rodding parts at affordable prices. With a name like Speedway, you can't go wrong.
Air and Fuel Delivery
Driveline and Axles
Tire and Wheel
Electrical, Lighting and Body
Fittings and Hose
Electrical, Charging and Starting
Electronics and Telematics
Accessories and Fluids
Fasteners and Hardware
Apparel and Gifts
Wiper and Washer
From: $9.99More InfoNewSwedged Steel Tube for 5/8 Inch Heim(Part #91034258)x
These 5/8" swedged steel sleeves have a 7/8" O.D. tube, 0.065 wall, and 5/8" RH and LH fine threads. Available in 1" increments from 4" to 20". IMCA approved. Sold Each.
From: $8.99More InfoJumbo Size Premium Tape(Part #910809)x
2" wide, 180' long, 11 mils thick. Colors available: red, blue, black, white, green, orange, purple, yellow.
$14.99More Info4 Inch Peep Mirror(Part #92550745)x
Our 4" diameter peep mirror clamps to the top edge of the door. Fits over a door edge that is app. 1/8" thick or thinner. Fits right or left side (reversible). A popular and universal mirror at a low cost. Sold each.
$8.99More InfoSpeedometer Drive Gear, C3DZ-17271-C, 17 Tooth, White(Part #916172711)x
These speedometer drive gears are for your 1983-1998 Mustang with a T5 transmission. It has a total of 17 teeth.
- Fits 1983-1998 Mustang w/T5 transmission
- Sold Individually
$2.99More InfoStraight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter(Part #91031831)x
Straight 3/8"-24 IFF to 1/8" NPT Male Adapter
From: $115.99More InfoSpeedway Chevy Universal Aluminum Radiators(Part #917347)x
Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.
These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.
- All-aluminum, furnace-brazed construction
- No cheap epoxy glue or crimped in gaskets
- Maximum amount of fins per inch allows greater heat transfer
- Billet filler necks
- Available in 22", 24", 28", or 31" widths (measurements include tanks)
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.
$5.99More InfoSpeedway Plastic Gear Box(Part #91681204)x
Use to protect and identify quick change gear sets.
$219.99More Info1963-1970 Ford Falcon Rear Sway Bar Kit, 7/8 Inch(Part #113676)x
These rear sway bars are designed as a performance replacement upgrade for your classic Ford Falcon that came with a factory installed sway bar. They feature a 7/8" diameter solid steel bar and come with all additional hardware needed for a successful installation. If your classic Mustang came with an anti-sway bar from the factory, chances are this kit will be a direct replacement. If originally equipped with a sway bar, the original hardware will need to be re-used, along with the additional supplied hardware. These sway bar kits should only be used when the vehicle has a factory installed swaybar.
- Achieve flatter cornering
- Complements front sway bar to reduce understeer and gain more neutral handing
- Adds to cornering stability at speed
- Solid steel 7/8" diameter bar
- Includes polyurethane bushings for increased responsiveness
- Black powder coated finish
- Corrosion resistant zinc plated hardware included
- 1963-1970 Ford Falcon
- 1964-1966 Ford Mustang, Mustang II, Mustang LX,GT
- 1966-1969 Ford Ranchero
- 1963-1965 Mercury Comet
"Speedway" Page 1 of 50
Page 1 of 50
$29.99More InfoSpeedway Fuel Level Gauge with Sender, 2-1/16 Inch(Part #91065042)x
These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face. The fuel sender comes with seal and and all mounting hardware.
- Overall Diameter: 2.25"
- Overall Length: 9.25"
- Includes sender
- 240 ohms empty, 33 ohms full
- Stainless steel bezel
- Backlit white face
- Replacement light socket assembly available # 910-65071
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.
$29.99More InfoPinstriped iPhone Cover - Gold(Part #2921005)x
Let us help you hot rod your iPhone 4. These slick covers help to protect and customize your smart phone.
- iPhone 4/4S only
- Rugged aluminum back plate
- Slimline rubber edging
$1,585.99More InfoFrench Grimes Racesaver Sprint 305 Chevy Brodix Cylinder Heads(Part #2353050)x
- Racesaver Sprint Series spec Brodix cylinder heads
- Fully assembled
- Heads are certified serial numbered
- Ready and legal for use on a 305 c.i. Racesaver engine
$16.99More InfoRocker Arm Balls for 7/16 Inch Stud(Part #57583530)x
Replacement rocker arm pivot balls with oil slots. Comes in a set of 16 for use with 7/16" rocker arm studs.
$5.99More Info1954 Chevy Park Light Lens, Amber(Part #9115400)x
These amber parking light lens for 1954 Chevy passenger cars feature original style lens pattering. They fit the factory housing and are a direct replacement for your old damaged or missing park light lens.
- Amber plastic lens with original style lens patterning
- Fits factory housing
- Left or Right Side
- Fits All Passenger Cars
- Sold each
$59.99More Info1982-95 Ford 302, 164 Tooth Flexplate(Part #57530202)x
- SFI approved
- .035 thicker than stock
- High tensile chromoly steel
- Designed and built for racing
- Manufactured to exceed OEM specs
- Double welded ring gears to withstand the RPM and stress of high stall converters
$9.99More InfoSpring Assortment - 200 Piece(Part #91005200)x
200 piece spring assortment. Comes with plastic case.
- Multipurpose spring assortment
- Compression & extension
- 200 pieces
$6.99$7.99More InfoSpeedway Extreme Gaskets, 2-1/2 Inch Collector Gaskets(Part #91013540)x
- Reusable triple-layer gasket
- Stainless steel with a heat-resistant, rubber-based inner core
- 0.085” thick, ultra pliable
- Easily conforms to surface irregularities to create a tight, leak-proof seal
$44.99More Info1949-1950 Chevy Chrome Tail Light Bezel with Red Reflector(Part #91149502)x
These tail light bezels for 1949-1950 Chevy passenger cars replicate those of the original. They feature a chrome plated finish and the original style red reflectors.
- Chrome plated steel bezel
- Has original style red reflector with "GUIDE" script
- Duplicate of original
- Left or Right Side
- Fits All Passenger Cars
$30.99More InfoSpeedway Classic 12 Inch Black Steering Wheel w/ Holes(Part #91032749)x
Smooth black cushion with chrome spokes. Has the common 3 bolt pattern mount. Wheels feature rubber steering wheel grip. Chrome center cap is included.
- Smooth black cushion
- 3 bolt pattern mount
- Chrome cap included
Note: These steering wheels require addtional purchase of a horn button retainer, not included with steering wheel. We offer our corresponding retainer (41010112) and various adapter kits for your specific application.
$59.99$99.99More InfoSpeedway Shock Wrench, QA1 Big Body(Part #9161000)x
- CNC machined aluminum
- Extra long handles for maximum leverage
$599.99More InfoBolt-In 1947-54 Chevy Pickup Mustang II Crossmember(Part #91044754)x
Our bolt-in Mustang II suspension kit for 1947-1954 Chevy half-ton and 3/4 ton pickups includes all hardware and instructions.
- Completely bolt in - no welding required
- Based on proven Mustang II geometry
- Complete with bolt in boxing plates to reinforce the frame
- Interlocking design for ultimate strength
- Threaded adjusters to fine tune ride height
- Full lower A-arms required with this crossmember (strutless type)
- Requires the use of a power rack and pinion and tubular control arms
- NOT for use with air ride
910-44754 Instructions (PDF)Note: Use bolt-in motor mount kit 910-54754 to mount your S/B Chevy.
$39.99More InfoMini Sprint LF Torsion Arm(Part #9609005)x
- I beam design
- 2024 material
- Two tone finish
- Includes pinch bolt
$399.99More InfoTribute T Modified Split Wishbones(Part #71545127)x
It doesn't get much more traditional than running a set of split wishbones. These split bones are all new with forged front yokes just like Henry built them and fit a 2-1/4" axle boss. Modified 5/8" spring perch boss as used on our Tribute-T kit.
- 40-3/4" from the front perch bolt centerline to the end of the 11/16"-18 threaded rear bung
- 5/8" sleeved bore behind axle to allow for spring perch mounting
- Material thickness is 12 GA (0.1046")
- Fully boxed
$24.99More Info2-1/2 Inch Rear Spring Shackles(Part #91033326)x
- For 2.5" wide leaf springs
- 1" bushing
- 2.5" center to center
- Sold as a pair
$7.99More Info3/8 X 3/8 Clevis(Part #6680116)x
The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115).
$12.99More InfoSpindle Nuts for Mustang II Spindle(Part #91631936)x
These spindle nuts are for your Mustang II Spindle. They are a combination of a castle nut and a washer.
- Includes Cotter Pin
- Sold as Pair
- Combination of castle nut and washer
$23.99More InfoStainless Steel Nylock Nut Kit, Fine Thread(Part #94004176)x
We now offer a full height self locking stainless steel nuts in fine thread in a plastic divider case with 25 (1/4") 20 (5/16") 20 (3/8") 15 (7/16") and 12 (1/2") nuts.
$4.99More InfoSpeedway Tire Coaster Set(Part #91019522)x
- Made from 100% recycled tire rubber
- Set of four
- Four distinct designs in each set
- Vintage Sprint Mag
- Kustom Cross-bar Flipper Cap
- D-hole Stock Car Wheel
- Redline 5 Spoke Mag