Browse our winning racing and performance auto parts.MORE
Speedway Motors is America's Oldest Speed Shop and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 60 years. With the customer in mind, Speedway Motors produces and sells high quality racing and rodding parts at affordable prices. With a name like Speedway, you can't go wrong.
These headlight bezels are garage sale priced because they have some blemishes in the finish.
NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
These chrome headlight rims are reproductions designed to fit 1940 Ford/Mercury passenger cars and 1940-41 Ford pickup trucks.
Engine assembly completion sets by Speedway R.A.C.E. stands for "remainder to assemble a complete engine." Available for S/B Chevy.
Item DetailsIncludes: LH & RH Dipstick Oil Pan Gaskets
"Thick" & "Thin" Front Oil Pan Seals
Water Pump & Fuel Pump Gaskets
Timing Cover Gaskets & Front Seal
Oil Drain Plug & Thermostat Housing Gaskets
Theses highly polished aluminum air cleaners have the look of billet without the expense. This 12" Ball-Milled Air Cleaner is cast aluminum, approximately 1/4" thick, polished, and the grooves you see are actually ball-milled. Even the base is 1/4" cast aluminum and polished. Fits carburetors with 5-1/8" air horns. Measures 12" long x 8-3/8" wide x 3" high.
- Ball-Milled Air Cleaner
- Highly polished cast aluminum
- Fits carburetors with 5-1/8" air horns
- 1/4" thick
- 12" long x 8-3/8" wide x 3" high
Billet aluminum cap and base. Weld or screw to your valve cover, oil tank or rear end. Knurled cap with O-ring seal.
- 1-1/4" inside diameter
- 1-1/4"-12 thread pitch
Note: If using this fill cap in a bolt-on manner, (3) #4 screws/bolts with a countersunk head are required (not included). Bolt hole size is 1/8".
Have you ever degreed in your cam only to have the timing mark off on the tab? This billet aluminum pointer is adjustable to cure the problem. Fits S/B Chevy with up to 7" balancer.
Includes 2 replacement perch bolts and 2 bolt-on frame brackets. No welding or cutting necessary. Typically used with stock or "split" wishbones. Works well wtih shock 582SM500 (or equivalent).
NOTE: Will not work with stock '35-'40 Ford sway bar. Will not work with Speedway 4-bar kit 91639108.
These all new reproduction pitman arms feature a non-offset design, a double tapered "Ford" tie rod end hole (lets you attach the drag link on the top or on the bottom), and comes in gleaming stainless steel or plain steel. Perfect for a repro Vega steering box.
Item DetailsTapered for tie rod end.
Looking for a durable way to protect your hoses or wires from excessive heat? If so, this thermal sleeve is sure bet. It features a soft knitted fiberglass interior that won't chafe which is coated with a thick layer of silicone. When combined, the materials will withstand 500°F of continuous heat, or 2000°F for a short duration. The sleeving is even designed to shed sparks while resisting hydraulic fluids and lubricating oil. Exposure to open flames will char the silicone coating but won't scorch the fiberglass inner layer.
Great for electrical wires, cables and fluid lines. Available in 3/4", 1" & 2" I.D. sizes and each is sold by the foot.
Protect your equipment from radiant heat. Often used to create curtains and screens, this sheeting has an aluminum foil backing that reflects heat and withstands temperatures up to 300° F. The fiberglass fabric base is off-white and has a maximum temperature of 1000° F. Foil backing is silver.
These washable, push-in pleated gauze valve cover breathers are available without a shield. The formed rubber nipple pushes into a 1.22" valve cover hole.
- Silver finish
- Without shield
- 1.22" valve cover hole
- Sold each
These premium quality big block Chevy (BBC) valve cover gaskets are made with a stainless steel frame sandwiched between durometer-tested neoprene rubber. This eliminates leakage caused by internal pressure fluctuations. Steel core valve cover gaskets won't tear or collapse.
- Steel core improves seal
- .175" thick
- Fits 396, 402, 427, and 454 big block Chevy engines
- Package of two gaskets
If your true love is anything that spells Chevy or has a Bow Tie, look at these.
These polished aluminum valve covers fit 1960-1986 S/B Chevys and are made to GM specs. They feature OEM style baffles and dippers. Available with or without the Chevy Bow Tie.These valve covers have built-in breather baffles. Two grommets are included, one for a stock PCV valve, one for a breather cap like our 910-11033.
Valve cover depth is 3-9/16". One 1-1/4" push-in hole per cover. Suggested bolt length is 1-1/4".
These premium quality small block Ford (SBF) valve cover gaskets are made with a stainless steel frame sandwiched between durometer-tested neoprene rubber. This eliminates leakage caused by internal pressure fluctuations. Steel core valve cover gaskets won't tear or collapse.
- Steel core improves seal
- Fits 260, 289, 302, and 351W small block Ford engines
- Package of two gaskets
Our 100% new, pressure cast & CNC machined pumps feature characteristics often overlooked by other manufacturers - precision-ground hubs to eliminate vibration; heavy duty ball-roller or ball-ball bearings; ceramic seal assemblies for extended life; closed-vane impellers for unsurpassed output; and zinc-coated backplates to stand up to corrosion.
"Short" style pumps came on all factory small block V8s from 1955 to 1968. However, this pump will fit all S/B Chevys up to 1985.
NOTE: This pump is designed primarily for street use and should not exceed 5,500 RPM.
Learn how to choose the correct water pump for your application by reading our tech article. SBC - Short vs Long Water Pump.
Speedway Cast Aluminum double groove pulleys for Small Block Chevy feature a 20% reduction. Reduction pulleys have a smaller diameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.
This is a 25% reduction pulley when used with the correct upper pulley, part number 91015476.
- Machined from lightweight cast aluminum
- Superior belt retention with extra-deep grooves
- 20% reduction slows accessories down for less drag
- Adds top-end horsepower
- Reduces water pump impeller speed below cavitation threshold
- Improved high-RPM cooling capabilities
- 5-7/16" O.D.
Available for long water pumps. 5/8" shaft.
Note: The lower crank pulleys are manufactured thicker than normal stock pulleys. This requires longer 3/8" bolts to be purchased separately. Allen head type bolts recommended.
Item DetailsCast Aluminum Lower
Help dress up your 1949-1953 flathead Ford V8 by replacing that beat-up old oil filler tube with these great-looking chrome versions. Tube is 6-1/4" long and includes a chrome push-on breather cap. This oil fill tube is for Offenhauser 1949-1953 Flathead Ford intake manifolds and only for holes that will accept a tube measuring 1.3695".
Fits most Offenhauser intake manifolds. Radiator hose modification may be required on some applications.
Item DetailsFits most Offenhauser intakes.
All the big boys run'em...so can you too. Billet aluminum shifter knob is lightweight, strong and looks great. 3/8"-16 mounting hole. 1-3/4" diameter. Can be used as automatic shift knob or manual shift knob.
Improved design. Three speed shifter with two levers. With heavy duty rod ends. Fully adjustable. Anodized aluminum.
The aluminum shifter arms (910-21956) that attach the shifter rods to the transmission are NOT included. They may or may not be needed, depending on the transmission that you will be using.
Stock capacity stamped steel oil pan for GM Turbo 350 automatic transmission. Chrome plated. Features cooling fins for additional cooling capacity. For TH350 transmission applications.
Includes drain plug.
Stock height stamped steel valve covers with breather tubes welded in. Lets your competition know that you're not running high dollar valve train components. Features 1-3/8" O.D. tubes with baffles on one cover only. Breathers not included.
Fits '60-'86 Small Block Chevy.
If you're running 1987-up centerbolt heads on your S/B Chevy, you know how hard it is to find valve covers to clear your rocker arms. These polished aluminum covers are 3-3/4" tall. Has two 1-3/8" x 2-3/4" tall baffled breather tubes on one side for oval track racing.
Bolts not included. Will not clear stud girdles.
These stock dimension valve covers are for 1987-up heads and Vortec style small block Chevy heads. They feature a beautiful chrome finish to dress up your engine bay. These valve covers have 1-hole per cover with separate oil fill and PCV holes. Holes are 1-1/4" with baffles.
- Stock dimension valve covers
- For 1987-up heads and Vortec style small block Chevy heads
- Beautiful chrome plated steel finish
- 1-hole per cover with separate oil fill and PCV holes
- Holes are 1-1/4" with baffles
- Grommets are NOT included
- Sold as a pair
- Suggested bolt length of 3-1/2"