Browse our wining racing and performance auto parts.MORE
Speedway Motors is America's Oldest Speed Shop and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 60 years. With the customer in mind, Speedway Motors produces and sells high quality racing and rodding parts at affordable prices. With a name like Speedway, you can't go wrong.
Excellent injection molded Chevelle cowl grille insert. 3 pcs. Fits applications with AC
- Injection molded
- 3 piece
- Fits applications with AC
- Camaros & Classics part number A-M2691
These nuts replace the ugly original nuts and act as a steering stop on 1937-1948 Ford kingpins only. Available in Chrome, Stainless Steel & Zinc.
- stop nuts 1-1/2" bottom to top
- interior threads are 7/16" x 20
Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.
These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.
- All-aluminum, furnace-brazed construction
- No cheap epoxy glue or crimped in gaskets
- Maximum amount of fins per inch allows greater heat transfer
- Billet filler necks
- Available in 22", 24", 28", or 31" widths (measurements include tanks)
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.
All the big boys run'em...so can you too. Billet aluminum shifter knob is lightweight, strong and looks great. 3/8"-16 mounting hole. 1-3/4" diameter. Can be used as automatic shift knob or manual shift knob.
- 3/8"-16 mounting hole
- 1-3/4" diameter
- Can be used as automatic shift knob or manual shift knob
When searching for a male connector for your air suspension tubing, look no further. These connector fittings feature copper construction and are for use with straight angle connections with two 3/8 inch fitting ends.
- Copper construction
- Straight angle
- 3/8" NPT to 3/8" tubing
- For air suspension Nylon tubing
This aluminum panel seals off the cockpit from debris. Aluminum construction is light yet durable. Fastens to the underside of the chassis with clamps, quarter-turn fasteners, or ties and mates to the rear of the floor pan. The relief in the center allows for drive line clearance when raising the rear of the car. Fits cars with long floor pan option.
- Fastens to the underside of the chassis
- Aluminum construction
- Natural finish
- 24.50" overall width
- 18.00" overall length
- Sold each
Heavy duty clutch return spring that attaches from the Z-bar to the frame bracket.
- Clutch return spring
- Attaches from the Z-bar to the frame bracket
- From 68-72 Chevelle
- Camaros & Classics part number A-M3460
Perfectly reproduced SS 454 wheel ornament for use on 1969-70 Super Sport Novas, 69 Camaro and 69-70 SS Chevelle. Priced Each."
- Reproduction SS 454 wheel ornament
- Sold each
- For use on 1969-70 Super Sport Novas, 69 Camaro and 69-70 SS Chevelle
- Camaros & Classics part number WH21502
Rubber insulators for rear coil springs made with correct fiber materials.
- Rubber insulators
- Made with correct fiber materials
- For 1964-66 Chevelle
- Camaros & Classics part number SUA-Z2205
These brass nipple pipe fittings feature two 3/8 inch NPT fitting ends with a straight brass design for use on air suspension systems.
- Brass construction
- Straight angle
- 3/8 inch NPT fitting end A
- 3/8 inch NPT fitting end B
These handsome 70-72 SS Nova Grills have the correct contours for a nice fit with the Headlamp Bezels. It is the catalyst for a nice looking front end.
- Reproduction SS grill
- Correct contours for a nice fit with the Headlamp Bezels
- For 1970-72 Nova SS
These Stallard Chassis Steering Hardware Kits mount your rack and pinion to the frame and upper steering support to the frame. They feature strong steel construction and zinc finish for your Micro Sprint race car.
- (4) 5/16-24" SAE nyloc nut
- (2) 5/16-24" X 1 3/4" SAE grade 8 bolt
- (2) 5/16-24" X 3" SAE grade 8 bolt
Assembly manuals are a duplicate copy of the original reference guide that was used by assembly line personnel when cars were being assembled at the factory. It includes detailed views of most areas of the car along with the original GM part numbers. This manual is a fantastic reference guide for any collector.
- Assembly manual
- Duplicate copy of original reference guide
- Fantastic reference guide for any collector
- For 1980 Camaro
- Camaros & Classics part number BK1980
Purchased Individually. Replacement Tall Rear Leaf Spring Nut Quality Hardware made in the U.S.
- Rear Leaf Spring T and U Bolt Nut
- Sold each
- For 1968-79 Nova; 67-81 Camaro
- Camaros & Classics part number SU2998A
Show quality hose kit for headlight wasdher set up on 69 Camaros and Chevelles. Pre-cut with T-fittings. Ready to install.
- Headlight washer hose kit
- Pre-cut with T-fittings
- Ready to install
- For 1969 Camaro and Chevelle
- Camaros & Classics part number RS1700
Top of the line reproduction park lamp moldings for 62-64 Nova. Includes mounting hardware. Sold as a Pair
- Reproduction park lamp moldings
- Hardware included
- Sold as a pair
- For 1962-64 Nova
- Camaros & Classics part number NV1150
No reason to go hunt for the hardware with this handy kit from Camaros and Classics. Mounts the pump and bracket to engine.
- Pump and bracket hardware kit
- Mounts the pump and bracket to engine
- For Big Block
- For 1969-72 Camaro, 69 Chevelle, 69 Nova
These stock height rear coil springs are for your 1964-1966 GM A-body vehicle. These coil springs are sold in pairs.
- Spring size: Inside Diameter 5.54", Bar Diameter .531", Installed Height 9.78"
- Load rating: 628 lbs.
- One tangential and one pigtail end
- All coil springs meet or exceed OEM (original equipment manufacturers) standards
These brass male run tee fittings connect and branch three 3/8" NPT threaded fittings. These brass T-shaped fittings feature one male and two female ends. They are for use on air suspension systems and air line tube connections.
- Brass construction
- 3/8" NPT fitting end A
- 3/8" NPT fitting end B
- 3/8" NPT fitting end C
Use these black battery terminal covers to impove the appearance of your battery connections. These battery terminal covers help protect against corrosion and shorting.
- Black battery terminal protector
- Improve the appearance of your battery connections
- Protect against corrosion and shorting
- Sold each
Correct reproduction tie strap for wiring and washer washer hose bundling. Sold each.
- Reproduction tie strap
- For wiring and washer washer hose bundling
- Sold each
- Camaros & Classics part number WA2711
Replacement Style US made power steering return line hose with correct fittings and pre-bent lines.
- Replacement power steering return line hose
- Includes correct fittings and pre-bent lines
- For 1967-72 Camaro; 68-74 Nova
Body shims are important when installing panels. This 25 piece kit contains shims measuring 1.25" x 1.125 x 1/8" thick and a 3/8" slot. 25 pieces to a kit
- Body shim kit
- 25 piece kit
- 1.25" x 1.125 x 1/8" thick
- Camaros & Classics part number SM3156
These same high quality componets all available individually Front end components from Camaros and Classics ensures quality, safety and OEM style appearance. Compare these quality parts prices with other's.Complete front end rebuild kit for making the ride smooth and straight. These front end components from Camaros and Classics ensures quality, safety and OEM style appearance. This kit will fet you going in the right direction everytime.Kit Includes:
- Upper & Lower Ball Joints
- Upper & Lower Control Arm Bushings
- Inner & Outer Tie Rods
- Adjustable Tie Rod Sleeves
- Sway Bar Frame Bushings
- Sway Bar End Link Kit
- Idler Arm
- Pitman Arm