Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"wishbone rod ends" Page 1 of 1

New (0)

Garage Sale (0)

  • Wishbone Splitting Kit for Heim Joints
    Wishbone Splitting Kit for Heim Joints
    x
                

    To get that traditional look you need to have split wishbones. This kit allows you to weld up your own split bones and includes 11/16" weld-in bungs for the wishbones, jam nuts and 11/16" heim joint rod ends. Heim accepts a 5/8" bolt.

    Cutting & welding required.

  • Wishbone Splitting Kit for Tie Rod Ends
    Wishbone Splitting Kit for Tie Rod Ends
    x
                

    To get that traditional look you need to have split wishbones. This kit allows you to weld up your own split bones and includes 11/16" weld-in bungs for the wishbones, jam nuts and 11/16" tie rod ends.

    Cutting & welding required.

  • Forged I-Beam Split Wishbone Front End Kit
    $649.99
    $699.99
    Product Rating: 3.50 Stars
    Forged I-Beam Split Wishbone Front End Kit
    x
                

    Split bones front end kit for '37-'48 Ford style spindles. Kit is based on our 910-35140.

    Kit Includes:

    • Wishbone style radius rods
    • Radius rod frame mounts
    • 29” leaf spring
    • Shackles
    • Perches
    • Lower shock mounts
    • Hardware
  • Forged I-Beam Split Wishbone Front End Kit, Drilled
    Forged I-Beam Split Wishbone Front End Kit, Drilled
    x
                

    Split bones front end kit for '37-'48 Ford style spindles. Kit is based on our 910-35141.

    Kit Includes:

    • Wishbone style radius rods
    • Radius rod frame mounts
    • 29” leaf spring
    • Shackles
    • Perches
    • Lower shock mounts
    • Hardware
  • Split Wishbone Style Radius Rods
    Split Wishbone Style Radius Rods
    x
                

    It doesn't get much more traditional than running a set of split wishbones. These split bones are all new with forged front yokes just like Henry built them and fit a 2-1/4" axle boss. 

    • 40-3/4" from the front perch bolt centerline to the end of the 11/16"-18 threaded rear bung
    • 1/2"-20 threaded roid to allow a spring behind perch, shock mount or other hardware to be used
    • Material thickness is 12 GA (0.1046")
    • Fully boxed
  • Split Wishbone Style Radius Rods w/ Holes
    Split Wishbone Style Radius Rods w/ Holes
    x
                

    It doesn't get much more traditional than running a set of split wishbones. These split bones are all new with forged front yokes just like Henry built them and fit a 2-1/4" axle boss. 

    • 40-3/4" from the front perch bolt centerline to the end of the 11/16"-18 threaded rear bung
    • 1/2"-20 threaded roid to allow a spring behind perch, shock mount or other hardware to be used
    • Material thickness is 12 GA (0.1046")
    • Includes lightening holes (holes not boxed)
  • 1937-48 Ford Steering Arms, 3-3/4 Inch Drop
    1937-48 Ford Steering Arms, 3-3/4 Inch Drop
    x
                

    These forged steel steering arms will attach to all 1937-48 Ford spindles but their greater drop, 3-3/4" from spindle mount holes means they work best on 1935-48 Ford cars (with spring-over front axle). Clears most radius rods and wishbones. These steering arms accept 11/16" Ford 7 degree "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.

    Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

    Steering Arm Ends Guide (GIF)

    Cross Steering Guide (GIF)

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Speedway Tribute T-Bucket Kit
    $3,999.99
    Product Rating: 5.00 Stars
    Speedway Tribute T-Bucket Kit
    x
                

    If you thought all T-buckets were the same, think again! The all-new Speedway Motors Tribute T breaks the T-bucket mold. It offers the traditional look of classic, competition-influenced roadsters combined with modern components and refined engineering. All this in a comfortable package that's easy to assemble using basic hand tools.

    The Tribute T frame has an extra-high rear kickup and Model A rear crossmember that will accept our medium-arch rear leaf spring. Rear axle options include our bolt-on Winters quick-change kit 7151801, bolt-on 9" Ford rear axle option 7151809, or a Ford-style banjo rear end of your choice (must be a centered-pinion rear axle). The front suspension uses a 4 inch drop I-beam axle, wishbone-style radius rods and traditional steering with a reversed Corvair steering box. All suspension, steering and brake pedal brackets are pre-welded to the frame and you can choose from flathead F

  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • TCI Engineering 204-2073-00 TH350 Transmission Mount-1937-1940 Ford
    TCI Engineering 204-2073-00 TH350 Transmission Mount-1937-1940 Ford
    x
                By removing a portion of the original crossmember and installing this kit you can improve your 1937-1940 Ford in 3 ways: 
    • increase chassis strength
    • make room for a modern transmission
    • provide a mount for a Turbo 350 or TH350 transmission

    After trimming your original wishbone and welding in new ends (easily accomplished off the car), the rest of the kit bolts right in.

    Ford Turbo 350 Transmission Mount Application Chart

  • Posies Super Slide Springs 2037-40L 35-40 Ford Front Leaf Spring-2 In. Drop
    Posies Super Slide Springs 2037-40L 35-40 Ford Front Leaf Spring-2 In. Drop
    x
                

    Achieve a smoother, more comfortable ride with one of Posies Super Slide™ springs! The ends of the spring leaves of a Super Slide™ spring have a unique "dimple" shape that retains a moly-nylon button which works as a dry lubricant to stop leaf-to-leaf interference. This freedom from friction lets the spring move more easily, thereby giving a softer, quieter ride.

    • 35-3/4" Reverse Eye
    • Made in the U.S.A. from high grade tempered steel
    • Reversed eyes for a 2" drop compared to stock
    • Get your ride lower without sacrificing ride comfort
    • Plain steel finish

    Posies Spring Application Chart (GIF)

    Leaf Spring Measuring Guide (Link)  

  • Garage Sale - 1937-48 Ford Steering Arm, 3-3/4 Inch Drop
    Garage Sale - 1937-48 Ford Steering Arm, 3-3/4 Inch Drop
    x
                Please view the product's page for more information