Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"winters sprint axle" Page 1 of 5

  • Winters Quick Change Gears, 10 Spline
    From: $59.99
    Product Rating: 5.00 Stars
    Winters Quick Change Gears, 10 Spline
    x
                
    • 8620 Steel
    • Heat Treated
    • CNC Machined
    • 10 spline
    • 1-1/4" Width

    Winters Quick Change Gear Chart

  • Conroy Diaghragm Bleeder Kit for Winters Midget Sprint Axle
    Conroy Diaghragm Bleeder Kit for Winters Midget Sprint Axle
    x
                

    Don't let centrifugal force control your bleeders. By mounting your bleeders in the center of the axle axis, these forces are eliminated and allow the bleeder to do the job it was intended to do. If you have ever lost a race because stagger went away, a Conroy Pneu Control will help you regulate it more accurately.

    The Conroy Pneu Control Diaphragm bleeder works on the same principal as a high speed by-pass. A preset spring pressure against a diaphragm controls the amount of air that is to pass through the port and it releases air instantly in a 360 degree pattern. You don't have to compensate for what you think it may bleed off at. It repeats within 2/10 of a pound. With 4 different springs, the bleeder has a range of 2 to 30 pounds.

    • Choose from axle sizes of 31 spline, 36 spline/1.625 i.d., and 36 spline/1.500 i.d.
    • Fits Winters midget rearends with 36 spline axle and 1-5/8" i.d. (36/1.625)
    • Fits Winters midget rearends with 36 spline axle and 1-1/2" i.d. (36/1.500)

    940-1301 Instructions (PDF)

  • Winters Performance 5778A Quickchange Sprint Axle, Standard, Aluminum
    Winters Performance 5778A Quickchange Sprint Axle, Standard, Aluminum
    x
                

    Bent or broken rear axles? Speedway carries Winters standard 1.750" I.D. replacement axles that will work for Winters rear ends only.  Aluminum axle for use with Sprint cars and not midgets. It does have the same offset the aphalt midgets run.

    • 52" off 1
    • Splined for floater brake hub
    • Hub Spline: 42
    • Brake Mount Spline: 46
    • Bore: 1.750"
    • Splined Bearing Shoulder: Yes
  • Winters Sprint Pro Eliminator Rear End
    From: $1,469.99
    Winters Sprint Pro Eliminator Rear End
    x
                

    The Winters Pro Elminator is the current state-of-the-art rearend used in all sprint car racing. The right-hand bell is part of the case, which allows the case to both stronger and lighter. Must ship by truck.

     

     

    Truck Freight Shipping Charges Apply - click here for details

  • Winters Ultra Light Quickchange Replacement Sprint Car Axle, 52 of 1
    Winters Ultra Light Quickchange Replacement Sprint Car Axle, 52 of 1
    x
                

    Bent or broken rear axles?  Speedway carries Winters standard 2.062" I.D. replacement axles that will work for Winters rear ends only.  Aluminum axle for use with Sprint cars and not midgets.

    • 52" off 1
    • Hub Spline: 42
    • Brake Mount Spline: 46
    • Bore: 1.750"
    • Aluminum
    • Splined Bearing Shoulder: Yes
  • Winter Sprint Car Hollow King Pin Kit for Lite Spindle, 5.6 Inch
    Winter Sprint Car Hollow King Pin Kit for Lite Spindle, 5.6 Inch
    x
                
    • Ford Sprint hollow king pin kit
    • For Lite Spindles
    • 5.6" long
    • Kit includes king pin cap
  • Winters Sprint/Midget Rearend Nut for Quick Change Cover
    Winters Sprint/Midget Rearend Nut for Quick Change Cover
    x
                Use these aluminum rear cover nuts on your Winters rear ends. They are sold individually and feature an anodized red finish.
    • Aluminum rear cover nuts
    • Red anodize
    • Fit Winters rearends
    • Sold individually
  • B&J Quick Change Gear Sets
    From: $174.99
    Product Rating: 5.00 Stars
    B&J Quick Change Gear Sets
    x
                

    SAVE! Buy 3 sets and you pay only $152.99 each.

    These gears have been used by more traveling professional racing teams than all others.  If you need gears that take less horsepower to run and will last many seasons these are the gears. Made with proprietary steel and proprietary heat treating. Under cut for lite weight. Crown shaved tooth profile.

    Quick Change Gear Set Chart Application

  • Winters 12239 Sprint Bird Cage Spacer for Left Rear Axle
    Winters 12239 Sprint Bird Cage Spacer for Left Rear Axle
    x
                

    These Sprint left rear bird cage spacers feature internal splines to protect the axle where the rotor slides over and space the bird cage out.  Winters Performance Products.

    • Left rear axle
    • Internally splined to protect axle
    • Spaces the bird cage out
  • Winters Performance 2269 Axle Saver For Splined End
    Winters Performance 2269 Axle Saver For Splined End
    x
                For use with axles that are splined next to the bird cage to protect the splines.
            
  • Eagle Motorsports 2-1/2 Inch Sprint Racing Front Axle Kit, 50 Inch Long
    Eagle Motorsports 2-1/2 Inch Sprint Racing Front Axle Kit, 50 Inch Long
    x
                

    These all new complete front axle kits from Eagle Motorsports come equipped with everything needed to assemble a Sprint car front end.  They feature Winters aluminum spindles and hubs, chrome powder coated 4130 chromoly tie rods, carbon fiber brake line guards, and Wilwood calipers.

    Kit includes:

    • Eagle 50" long x 2 1/2" O.D. plain finish front axle
    • Eagle two tone black steering arms
    • Winters aluminum spindles/steel snout
    • 5.5" kingpins
    • 2 thrust bearing kits
    • Chrome powder coated 4130 chromoly tie rod
    • 2 FK steel heims, jam nuts
    • Carbon fiber brake line guard
    • Winters black aluminum front hubs
    • Complete LF brake kit with Wilwood caliper
    • All necessary hardware
    Assembly required.
  • Winters Performance 6683 Sprint Car Axle Spacer, No Splines, .375 Inch
    Winters Performance 6683 Sprint Car Axle Spacer, No Splines, .375 Inch
    x
                All the spacers you could need for the right set-up. Availiable as splined, not splined, and tapered with spline. Aluminum.
            
  • Winters Performance 6154 Sprint Car Axle Spacer, No Splines, .720 Inch
    Winters Performance 6154 Sprint Car Axle Spacer, No Splines, .720 Inch
    x
                All the spacers you could need for the right set-up. Availiable as splined, not splined, and tapered with spline. Aluminum.
            
  • Conroy Pneu Bleeder Poppet Bleeder Kit for Winters Axle
    Conroy Pneu Bleeder Poppet Bleeder Kit for Winters Axle
    x
                Don't let centrifugal force control your bleeders. By mounting your bleeders in the center of the axle axis, these forces are eliminated and allow the bleeder to do the job it was intended to do. Also available in diaphragm style.
            
  • Speedway Plastic Gear Box
    $5.99
    Product Rating: 4.00 Stars
    Speedway Plastic Gear Box
    x
                Use to protect and identify quick change gear sets.
            
  • Conroy Diaghragm Bleeder Kit for Winters Axle
    Conroy Diaghragm Bleeder Kit for Winters Axle
    x
                

    Don't let centrifugal force control your bleeders. By mounting your bleeders in the center of the axle axis, these forces are eliminated and allow the bleeder to do the job it was intended to do. If you have ever lost a race because stagger went away, a Conroy Pneu Control will help you regulate it more accurately.

    The Conroy Pneu Control Diaphragm bleeder works on the same principal as a high speed by-pass. A preset spring pressure against a diaphragm controls the amount of air that is to pass through the port and it releases air instantly in a 360 degree pattern. You don't have to compensate for what you think it may bleed off at. It repeats within 2/10 of a pound. With 4 different springs, the bleeder has a range of 2 to 30 pounds.

    940-1501 Instructions (PDF)

  • Winters Performance 3622 Sprint Aluminum Spindle, Steel Snout
    Winters Performance 3622 Sprint Aluminum Spindle, Steel Snout
    x
                

    Equip your sprint car with spindles from one of the top names in racing - Winters Performance Products. These aluminum spindles have 3-1/4” bolt spacing and steel straight snouts. The innovative spindle nut design makes it impossible for the nut to work itself loose when racing.

    • Strong aluminum construction
    • Steel snout
    • Common 3-1/4" bolt spacing
    • Spindle nut design will not work loose when racing
    • Weight: 2.470 lbs.

    Fits sprint car axles that accept a 5.6" long kingpin, such as 940-35014 (steel) or 546-01440 (titanium).

  • Wilwood 270-9761 Dynamic Brake Clamp, 6 x 5-1/2 Inch Bolt Pattern
    Wilwood 270-9761 Dynamic Brake Clamp, 6 x 5-1/2 Inch Bolt Pattern
    x
                

    Wilwood's Sprint inboard hub & adapter kit provides a basis to bolt dynamic rotor rotor mounting of standard 6 x 5.50" bolt pattern rotors. Contains rotor adapter and dynamic rotor mounting bolt kit. Made from high strength aluminum. It provides a lightweight and strong solution for rotor mounting. Weighs only 1.2 lbs.

    • Sprint Inboard
    • Sprint / Midget use only 
    • Material: Aluminum
    • Finish: Black Anodize
    • Weight: 1.2
    • Rotor Mount Bolt Circle (in.): 8 x 3.35
    • Mount Type: Adapter-Dynamic
    • Adapter bolt Circle (s) 6-Bolt Type: 6 x 5.50 in.

    Will clamp to a Winters axle and dynamic mount rotors.

  • Conroy Pneu Bleeder Poppet Bleeder Kit for Winters Midget Axle
    Conroy Pneu Bleeder Poppet Bleeder Kit for Winters Midget Axle
    x
                Don't let centrifugal force control your bleeders. By mounting your bleeders in the center of the axle axis, these forces are eliminated and allow the bleeder to do the job it was intended to do. Also available in diaphragm style.
            
  • Winters Ultralight Axle Nut
    $34.99
    Winters Ultralight Axle Nut
    x
                Lightweight aluminum hex nuts.  The winters 3" live axle uses 2-1/2" threads for axle nuts.
            
  • Winters Performance 5778L Quickchange Aluminum Axle, Lightweight
    Winters Performance 5778L Quickchange Aluminum Axle, Lightweight
    x
                

    Bent or broken rear axles? Speedway carries Winters standard 1.875" I.D. replacement axles that will work for Winters rear ends only.

    • Hub Spline: 42
    • Brake Mount Spline: 46
    • Bore: 1.750"
    • Splined Bearing Shoulder: Yes
  • Winters Performance 3622 Black Sprint Aluminum Spindle, Steel Snout
    Winters Performance 3622 Black Sprint Aluminum Spindle, Steel Snout
    x
                

    Equip your sprint car with spindles from one of the top names in racing - Winters Performance Products. These anodized black aluminum spindles have 3-1/4” bolt spacing and steel straight snouts. The innovative spindle nut design makes it impossible for the nut to work itself loose when racing.

    • Strong aluminum construction
    • Steel snout
    • Common 3-1/4" bolt spacing
    • Spindle nut design will not work loose when racing
    • Weight: 2.470 lbs.

    Fits sprint car axles that accept a 5.6" long kingpin, such as 940-35014 (steel) or 546-01440 (titanium).

  • Winters Performance 3622T Sprint Aluminum Spindle, Titanium Snout
    Winters Performance 3622T Sprint Aluminum Spindle, Titanium Snout
    x
                

    Equip your sprint car with spindles from one of the top names in racing - Winters Performance Products. These aluminum spindles have 3-1/4” bolt spacing and titanium straight snouts. The innovative spindle nut design makes it impossible for the nut to work itself loose when racing.

    • Strong aluminum construction
    • Lightweight titanium snout
    • Common 3-1/4" bolt spacing
    • Spindle nut design will not work loose when racing
    • Weight: 2.185 lbs.

    Fits sprint car axles that accept a 5.6" long kingpin, such as 940-35014 (steel) or 546-01440 (titanium).

  • Winters Black Sprint Aluminum Spindle, Titanium Snout
    Winters Black Sprint Aluminum Spindle, Titanium Snout
    x
                

    Equip your sprint car with spindles from one of the top names in racing - Winters Performance Products. These aluminum spindles have 3-1/4” bolt spacing and titanium straight snouts. The innovative spindle nut design makes it impossible for the nut to work itself loose when racing.

    • Strong aluminum construction
    • Lightweight titanium snout
    • Common 3-1/4" bolt spacing
    • Spindle nut design will not work loose when racing
    • Weight: 2.185 lbs.

    Fits sprint car axles that accept a 5.6" long kingpin, such as 940-35014 (steel) or 546-01440 (titanium).

Goto Previous PagePrevious Page
1 2 3 4 5