Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"winters quick change axle" Page 1 of 4

  • Winters Performance SR2525 SR2980 56 Inch Quickchange Rear End, Plain
    Winters Performance SR2525 SR2980 56 Inch Quickchange Rear End, Plain
    x
                

    Winter's Championship rear end is available with either plain or fully polished housing, six-rib side bells and standard rear cover. Features a standard driveshaft yoke, heat treated lower shaft, 31-spline Winters Track posi differential, and a 4.12:1 ring and pinion.

    Housing ends are standard 3.15" big Ford and include 2.5" offset axles. Axles drilled for both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns. Measures 56" from axle flange to axle flange and requires our part #91711 10-spline quick change gears.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Winters Performance SR2525 SR8207 SR2980 56 Inch Quickchange, Polished
    Winters Performance SR2525 SR8207 SR2980 56 Inch Quickchange, Polished
    x
                

    Winter's Championship rear end is available with either plain or fully polished housing, six-rib side bells and standard rear cover. Features a standard driveshaft yoke, heat treated lower shaft, 31-spline Winters Track posi differential, and a 4.12:1 ring and pinion.

    Housing ends are standard 3.15" big Ford and include 2.5" offset axles. Axles drilled for both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns. Measures 56" from axle flange to axle flange and requires our part #91711 10-spline quick change gears.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Winters Performance SR2550 SR2980 56 Inch V8 Quickchange, Plain
    Winters Performance SR2550 SR2980 56 Inch V8 Quickchange, Plain
    x
                

    It's been a long time since you could buy a 100% brand new V-8 quick change with the features this one showcases. Each of these assemblies includes new axles with 5 on 4-1/2" and 5 on 4-3/4" bolt patterns, 3.78:1 ring & pinion, Wedgelock differential, 1310 series yoke, and plain steel axle tubes. Accepts our part #91712 6-spline quick change gears.

    56" wide hub-to-hub. Uses the big Ford bearing (3.150") (Big Ford / New Style ) and has a 2-1/2" axle offset.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Winters Performance SR2550 8207 56 Inch V-8 Quickchange, Polished
    Winters Performance SR2550 8207 56 Inch V-8 Quickchange, Polished
    x
                

    It's been a long time since you could buy a 100% brand new V-8 quick change rearend with the features this one showcases. Each of these rear assemblies includes new axles with 5 on 4-1/2" and 5 on 4-3/4" bolt patterns, 3.78:1 ring & pinion, Wedgelock differential, 1310 series yoke, and plain steel axle tubes. Accepts our part #91712 6-spline quick change gears.

    56" wide hub-to-hub. Uses the big Ford bearing (3.150") and has a 2-1/2" axle offset.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Speedway Tribute T-Bucket Kit
    $3,999.99
    Product Rating: 5.00 Stars
    Speedway Tribute T-Bucket Kit
    x
                

    If you thought all T-buckets were the same, think again! The all-new Speedway Motors Tribute T breaks the T-bucket mold. It offers the traditional look of classic, competition-influenced roadsters combined with modern components and refined engineering. All this in a comfortable package that's easy to assemble using basic hand tools.

    The Tribute T frame has an extra-high rear kickup and Model A rear crossmember that will accept our medium-arch rear leaf spring. Rear axle options include our bolt-on Winters quick-change kit 7151801, bolt-on 9" Ford rear axle option 7151809, or a Ford-style banjo rear end of your choice (must be a centered-pinion rear axle). The front suspension uses a 4 inch drop I-beam axle, wishbone-style radius rods and traditional steering with a reversed Corvair steering box. All suspension, steering and brake pedal brackets are pre-welded to the frame and you can choose from flathead F

  • B&J Quick Change Gear Sets
    From: $174.99
    Product Rating: 5.00 Stars
    B&J Quick Change Gear Sets
    x
                

    SAVE! Buy 3 sets and you pay only $152.99 each.

    These gears have been used by more traveling professional racing teams than all others.  If you need gears that take less horsepower to run and will last many seasons these are the gears. Made with proprietary steel and proprietary heat treating. Under cut for lite weight. Crown shaved tooth profile.

    Quick Change Gear Set Chart Application

  • Winters 1 Inch Midget Gear Set
    From: $69.99
    Winters 1 Inch Midget Gear Set
    x
                

    1" wide midget 6 spline gear sets are CNC machined from 8620 steel and are heat treated.

    Buy three or more sets, and each set is only $69.99

    Midget Rear End Guide

    Midget Gear Set Chart Application
  • Winters Light Quick Change
    From: $2,099.99
    Winters Light Quick Change
    x
                

    If you run at any of the Outlaw modified races you will need one of these Winters steel tubed quick changes. It is 60" wide with no offset and 4.86 gears on an aluminum spool.

    Choose bare as pictured or with 30.5" 31 splined axles, brake rotors, and 5 X 5" GN hubs.

    Replacement steel axle tubes and 31 spline axles are available if needed.

    • Thermal Coating
    • Magnesium Case
    • EDM Ring and Pinion
    • REM Finish
  • Winters Modified Quick Change Rear End
    From: $1,399.99
    Winters Modified Quick Change Rear End
    x
                

    If you run at any of the Outlaw modified races you will need one of these Winters steel tubed quick changes. It is 60" wide with no offset and 4.86 gears on an aluminum spool.

    Choose bare as pictured or with 30.5" 31 splined axles, brake rotors, and 5 X 5" GN hubs.

    Replacement steel axle tubes and 31 spline axles are available if needed.

  • Winters Sprint/Midget Rearend Nut for Quick Change Cover
    Winters Sprint/Midget Rearend Nut for Quick Change Cover
    x
                Use these aluminum rear cover nuts on your Winters rear ends. They are sold individually and feature an anodized red finish.
    • Aluminum rear cover nuts
    • Red anodize
    • Fit Winters rearends
    • Sold individually
  • Speedway Tribute T-Bucket Quick Change Rear End Kit
    Speedway Tribute T-Bucket Quick Change Rear End Kit
    x
                Please view the product's page for more information
            
  • Pro-Eliminator/Winters Rear Cover Gasket, Heavy Duty w/ Steel Core
    Pro-Eliminator/Winters Rear Cover Gasket, Heavy Duty w/ Steel Core
    x
                

    Pro-Eliminator and Winters replacement gasket for Winters quick change rear ends. Available in heavy duty reuseable with a steel core.

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (PDF)

    Pro Eliminator Rear End Diagram (GIF) 

     

  • Winters Performance 6729 Replacement Rear Cover Gasket, Paper
    Winters Performance 6729 Replacement Rear Cover Gasket, Paper
    x
                

    Winters replacement gasket for Winters quick change rear ends. Available in economical paper.

    Winters Exploded View Figure (GIF)

  • Axle Tube for G.N. Q.C.
    $109.99
    Axle Tube for G.N. Q.C.
    x
                Note-Not IMCA Legal. 
            
  • Winters Performance Nostalgia V-8 Quickchange, Polished Housing
    Winters Performance Nostalgia V-8 Quickchange, Polished Housing
    x
                Finally an all new V-8 quick change that has steel side bells and tubes that accept modern axles. They are available in either plain finish or a polished center section that includes stainless steel fasteners. These rear ends are 56" from hub to hub and have both 5 on 4 1/2" and 5 on 4 3/4" bolt patterns. They accept the new style big Ford brakes with a 2 1/2" offset and the standard Spicer 1310 Chevy 3-1/4" u-joint. The 3.78 ring and pinion is mounted on a wedgelock differential and accepts common 6 spline quick change gears. 
            
  • Winters Performance SR2550STB SR2960 Nostalgia V8 Quickchange, Plain
    Winters Performance SR2550STB SR2960 Nostalgia V8 Quickchange, Plain
    x
                Finally an all new V8 quick change that has steel side bells and tubes that accept modern axles. They are available in either plain finish or a polished center section that includes stainless steel fasteners. These rear ends are 56" from hub to hub and have both 5 on 4 1/2" and 5 on 4 3/4" bolt patterns. They accept the new style big Ford brakes with a 2 1/2" offset and the standard Spicer 1310 Chevy 3-1/4" u-joint. The 3.78 ring and pinion is mounted on a wedgelock differential and accepts common 6 spline quick change gears. 
            
  • Winters Performance 5097 Shim Kit for Steel Spools/Differentials
    Winters Performance 5097 Shim Kit for Steel Spools/Differentials
    x
                

    Winters Replacement Parts

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (pdf)

  • Winters Performance 7111B 3/8 Inch Recessed Socket Head Pipe Plug
    Winters Performance 7111B 3/8 Inch Recessed Socket Head Pipe Plug
    x
                

    Winters Replacement Parts

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (pdf)

  • Winters Ultra Light Quickchange Replacement Sprint Car Axle, 52 of 1
    Winters Ultra Light Quickchange Replacement Sprint Car Axle, 52 of 1
    x
                

    Bent or broken rear axles?  Speedway carries Winters standard 2.062" I.D. replacement axles that will work for Winters rear ends only.  Aluminum axle for use with Sprint cars and not midgets.

    • 52" off 1
    • Hub Spline: 42
    • Brake Mount Spline: 46
    • Bore: 1.750"
    • Aluminum
    • Splined Bearing Shoulder: Yes
  • Winters Performance 5778A Quickchange Sprint Axle, Standard, Aluminum
    Winters Performance 5778A Quickchange Sprint Axle, Standard, Aluminum
    x
                

    Bent or broken rear axles? Speedway carries Winters standard 1.750" I.D. replacement axles that will work for Winters rear ends only.  Aluminum axle for use with Sprint cars and not midgets. It does have the same offset the aphalt midgets run.

    • 52" off 1
    • Splined for floater brake hub
    • Hub Spline: 42
    • Brake Mount Spline: 46
    • Bore: 1.750"
    • Splined Bearing Shoulder: Yes
  • Winters Performance 5778L Quickchange Aluminum Axle, Lightweight
    Winters Performance 5778L Quickchange Aluminum Axle, Lightweight
    x
                

    Bent or broken rear axles? Speedway carries Winters standard 1.875" I.D. replacement axles that will work for Winters rear ends only.

    • Hub Spline: 42
    • Brake Mount Spline: 46
    • Bore: 1.750"
    • Splined Bearing Shoulder: Yes
  • Longacre 22568 Rear End Axle Breather Vent Kit, 1-3/4 Inch Tube Clamp
    Longacre 22568 Rear End Axle Breather Vent Kit, 1-3/4 Inch Tube Clamp
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • Tube clamp on design, no welding required
    • Includes vent, hardware, and hose for a quick professional installation
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-3/4 in. round bar.
  • Longacre 22569 Rear End Axle Breather Vent Kit, 1-1/2 Inch Tube Clamp
    Longacre 22569 Rear End Axle Breather Vent Kit, 1-1/2 Inch Tube Clamp
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • 1/4" NPT
    • Clamp on design, no welding required
    • Includes vent, hardware, and hose for a quick professional installation
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-1/2 in. round bar.
  • Longacre 22564 Rear End Axle Breather Vent, 1-3/4 Inch, Breather Only
    Longacre 22564 Rear End Axle Breather Vent, 1-3/4 Inch, Breather Only
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • Breather Only
    • Clamp on design, no welding required
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-3/4 in. round bar.
Goto Previous PagePrevious Page
1 2 3 4