Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"wilwood cylinder pedal" Page 1 of 1

  • Wilwood Reverse Swing Triple Master Cylinder Pedal, 6.2:1
    Wilwood Reverse Swing Triple Master Cylinder Pedal, 6.2:1
    x
                

    Wilwood's racing brake/clutch pedal assemblies are the result of years of hands-on experience, input from racers and chassis builders, and design, material selection and manufacturing techniques that result in durable, lightweight components. They incorporate ergonomics without sacrificing performance, and practical requirements without adding weight.

    Tri reverse mount master cylinder pedal assembly has both clutch and brake pedals with balance bar for dual brake master cylinders.

    • Combines the brake & clutch pedals into one unit
    • Positions M/C inside the firewall away from engine heat
    • Aluminum frame & arm construction
    • Steel pivots & mounting studs
    • Anti-skid pedal pads
    • Clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias
    • Bias can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustment

    910-29974 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    x
                

    Wilwood's racing brake/clutch pedal assemblies are the result of years of hands-on experience, input from racers and chassis builders, and design, material selection and manufacturing techniques that result in durable, lightweight components. They incorporate ergonomics without sacrificing performance, and practical requirements without adding weight.

    • Combines the brake & clutch pedals into one unit
    • Positions M/C inside the firewall away from engine heat
    • Aluminum frame & arm construction
    • Steel pivots & mounting studs
    • Anti-skid pedal pads
    • Clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias
    • Bias can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustment

    Tri reverse mount master cylinder pedal assembly has both clutch and brake pedals with balance bar for dual brake master cylinders.

    910-29977 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    x
                

    This pedal is often used as a clutch pedal with a single outlet master cylinder, or as a brake pedal in conjunction with dual outlet, tandem master cylinders on four wheel brake equipped vehicles. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad.

    Swing mount has a 7.00 to 1 pedal ratio.

    Pedal Dimensions (Link)

    Detailed Schematic of Pedal 

  • Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    x
                

    This popular pedal mounts two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • The swing type pedal has a ratio of 7:1
    • Includes balance bar
    • This popular pedal mounts two brake master cylinders with a bias balance bar

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood 340-3342 Reverse Swing Triple Master Cylinder Pedal, 6.25:1
    Wilwood 340-3342 Reverse Swing Triple Master Cylinder Pedal, 6.25:1
    x
                

    This assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 6.25:1 ratio on both clutch and brake pedal.

  • Wilwood 340-4828 Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    Wilwood 340-4828 Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    x
                

    This assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 5.1:1 ratio on both clutch and brake pedal.

  • Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    x
                

    Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.25 to 1 pedal ratio. Master cylinders have single 1/8" NPT outlets.

    • Positions master cylinders inside the firewall away from engine heat
    • Aluminum frame and arm construction
    • Steel pivots and mounting studs
    • Anti-skid pedal pad

    910-29972 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood 340-1287 Dual Master Cylinder Swing Mount Pedal
    Wilwood 340-1287 Dual Master Cylinder Swing Mount Pedal
    x
                

    This popular swing mount pedal mounts two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 7.00 to 1 pedal ratio.

    835-3401287 Instructions (PDF)

  • Wilwood Dual Master Cylinder Floor Mount Pedal Assembly
    Wilwood Dual Master Cylinder Floor Mount Pedal Assembly
    x
                

    This is one of racing's most popular pedals for mounting two brake master cylinders with a bias balance bar. The floor mount pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 

    • Floor mount assembly
    • Has a 6:1 pedal ratio
    • Includes brake balance bar

    910-29976 Instructions (PDF)

    910-29976 Specs Sheet

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • US Brake Tri Reverse Mount Master Cylinder Pedal Assembly, 5.1:1
    US Brake Tri Reverse Mount Master Cylinder Pedal Assembly, 5.1:1
    x
                

    This Wilwood pedal/US Brake master cylinder assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • 5.1:1 pedal ratio 
    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction
    • Each master cylinder has a single 1/8" NPT outlet
    • Specify m/c bore sizes needed (3/4", 7/8", 1")

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    x
                

    This Wilwood pedal/US Brake master cylinder assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • 6.2:1 pedal ratio 
    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction
    • Each master cylinder has a single 1/8" NPT outlet
    • Specify m/c bore sizes needed (3/4", 7/8", 1")

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • US Brake Swing Mount Dual Master Cylinder Pedal
    US Brake Swing Mount Dual Master Cylinder Pedal
    x
                

    This combo pairs a Wilwood pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 7:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", or 1".

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Dual Reverse-Mount Master Cylinder Pedal Kit
    Dual Reverse-Mount Master Cylinder Pedal Kit
    x
                

    This Wilwood pedal mounts two US Brake master cylinders with a bias balance bar and positions the master cylinders inside the firewall and away from engine heat. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable (at right) for quick on-track adjustments.

    • US Brake Master Cylinders
      • External return spring maintains positive pedal feel, prolongs pad life
      • Polished smooth bores
      • One-piece alumiunum construction

    6.25:1 pedal ratio. Each master cylinder has a single 1/8" NPT outlet. Specify m/c bore sizes.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood 340-1285 Floor Mount Dual Master Cylinder Brake Pedal
    Wilwood 340-1285 Floor Mount Dual Master Cylinder Brake Pedal
    x
                

    This is one of racing's most popular pedals for mounting two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. With a 6.00 to 1 pedal ratio.

    Pedal Dimensions (Link)

    835-3401285 Instructions (PDF)

  • US Brake Dual Master Cylinder Floor Mount Pedal
    US Brake Dual Master Cylinder Floor Mount Pedal
    x
                

    This combo pairs a Wilwood floor mount pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    US Brake Master Cylinders

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Has a 6:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", 1".

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood and Speedway IMCA Mod Pedal Kit
    Wilwood and Speedway IMCA Mod Pedal Kit
    x
                Our affordable Speedway pedal kit comes with everything you'll need for your IMCA racer.

    Kit includes:
    • Tri Master Pedal Assembly
    • Wilwood Aluminum Master Cylinders: 3/4", 7/8" & 1"
    • Brake Bias Cable
    • Side Mount Throttle Pedal

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood 340-5181 Reverse Swing Mount Brake Pedal
    Wilwood 340-5181 Reverse Swing Mount Brake Pedal
    x
                

    Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.25 to 1 pedal ratio.

    • Positions master cylinders inside the firewall away from engine heat
    • Aluminum frame and arm construction
    • Steel pivots and mounting studs
    • Anti-skid pedal pad

    835-3405181 Instructions (PDF)

  • Wilwood 340-1289 Floor Mount Clutch Pedal
    Wilwood 340-1289 Floor Mount Clutch Pedal
    x
                This pedal can be used for either a hydraulic clutch release or brake master cylinder when used with Wilwood's tandem feed master cylinder and adapter kit. 
    • 6:1 pedal ratio
    • All aluminum frame and arm with steel pivots
    • Anti-skid pedal pad
    • Mounting flange is a vertical pattern on a 2-1/4" on center

    835-3401289 Dimensions (Link)

  • Wilwood High Volume Aluminum Master Cylinder
    Wilwood High Volume Aluminum Master Cylinder
    x
                

    Wilwood high-volume aluminum master cylinders have the highest fluid capacity of any integral reservoir design. With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands. More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long events. With 1-7/16" of piston travel, there is plenty of margin when used with large four or six piston calipers.

    An internal slosh baffle guarantees a constant fluid supply to the bore chamber during hard cornering, acceleration and braking. This unique baffle also eliminates aeration into the reservoir from return fluid that can occur during brake release and bleeding procedures.

    • Die-cast from high-grade aluminum
    • Heavy-duty internal piston springs provide fast retraction for immediate release and positive fluid transfer without the need for cumbersome external pushrod springs
    • Pedal feel is improved, piston retraction is guaranteed, fluid recovery is quicker and the bleeding process is simplified
    • Formed steel lids, heavyweight bail wires and bellows type gaskets keep the fluid in and the moisture out with correct pressure balancing during fluid displacement
    • 1/8"-27 NPT fluid port

    835-260676 Instructions (PDF)

    Learn more about selecting th

  • Wilwood 260-7563 Tandem Remote Fill Master Cylinder
    Wilwood 260-7563 Tandem Remote Fill Master Cylinder
    x
                

    Tandem remote master cylinders provide one of the safest ways to actuate four wheel or dual caliper axle brake systems. This versatile, lightweight and easily adapted master cylinder provides single pushrod activation of two separate brake fluid circuits. By completely isolating the fluid reservoirs and circuits, the front and rear brakes are able to operate independently of each other and provide a safety net should any one side of the system become inoperable. Shipped complete with the master cylinder and all necessary hardware including 30 inches of hose that can be cut to the desired length for remote mounting of the two 4 ounce fluid reservoirs. 

    • Can be bolted directly to Wilwood single mount pedals
    • 50/50 front/rear brake output from a 1.00" bore with 1.10" stroke
    • Great match for Wilwood's Bolt-On-Disc Brake Kit systems configured from OE components
    • Reservoirs can be either remote or master cylinder mounted

    Tandem Remote Fill Master Cylinder Installation Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood Tandem Master Cylinders, 1-1/8 Inch Bore
    Wilwood Tandem Master Cylinders, 1-1/8 Inch Bore
    x
                

    Wilwood’s tandem chamber master cylinders represent the latest refinements in brake pressure actuation and fluid control. The exclusive Wilwood features incorporated in this innovative and unique new design make it the perfect choice for a wide range of custom manual or power brake applications.

    Each master cylinder is configured with full separation between the front and rear reservoir chambers and fluid outlets. There is a pressure access on both sides of the piston bore for right or left hand plumbing based on mount location. A total piston stroke of 1.10” is distributed at a 2:1 volume ratio between the primary and secondary chambers.

    Wilwood Master Cylinder Installation Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood Tandem Master Cylinders, 1 Inch Bore
    Wilwood Tandem Master Cylinders, 1 Inch Bore
    x
                Please view the product's page for more information
            
  • Wilwood 260-4893 Tandem Master Cylinder
    $104.99
    $113.99
    Product Rating: 5.00 Stars
    Wilwood 260-4893 Tandem Master Cylinder
    x
                

    Made from durable lightweight aluminum with a large capacity plastic reservoir and dual outlet bores, this Chrysler-style master cylinder utilizes standard O.E.M. internal components. Standard factory mounting bolt holes can be adapted to racing pedal assemblies with an optional mounting adapter bracket 250-3677. This lightweight (2.5 lbs.) reliable master cylinder is used for drag racing, late model stock cars, street rod and off road applications. 

    Has a 1-1/16" bore with 9/16"-20 inverted flare and 1/2"-20 inverted flare outlets. Included are two 3/16" brake line fittings that will require you to cut and reflare your brake line.

    835-2604893 Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Motive Products 0100 Pressure Brake Bleeder, Wilwood Master Cylinder
    Motive Products 0100 Pressure Brake Bleeder, Wilwood Master Cylinder
    x
                

    This brake pressure bleeder makes bleeding brakes a one man job. Fits Wilwood screw type master cylinder caps, many OEM manufacturer's master cylinders, and all other cars with 45mm threaded hydraulic fluid reservoir caps. Works with many Wilwood universal master cylinders, including 260-3372, 260-3374, 260-3376, 260-3378, 260-3380, and 260-5920. Will NOT work with Tilton master cylinders.

    Here's how it works: A tank containing new hydraulic fluid is connected to the fluid reservoir on your vehicle and pressurized with air from a hand pump (pressure gauge ensures that the hydraulic system is not damaged due to excessive pressure). When one of the bleed valves on the vehicle is opened, old hydraulic fluid is expelled as new fluid from the tank is forced into the system.
    • Bleeding has never been easier!
    • No need for a helper to constantly pump the pedal while you open and close the bleed valves
    • Two liter tank prevents the need for constant refilling of the fluid reservoir, thereby avoiding corrosive spills
    • Fast, easy and reliable one-person operation
    • Works on hydraulic clutch systems, too
    Read more about bleeding brakes in our tech article, How To Bleed Your Brake Lines.
  • Wilwood 340-11299 Adjustable Mount Pedal Assembly - Reverse Mount
    Wilwood 340-11299 Adjustable Mount Pedal Assembly - Reverse Mount
    x
                Wilwood’s new Adjustable Mount Pedal assembly  combines the brake and clutch pedals together in one unit and positions  the master cylinders inside the firewall, away from engine heat.
    • All aluminum frame
    • Forged aluminum pedal arms with ladder style construction
    • Adjustable pads allow fine-tuning of the pedal location and clearance.
    • 6.25 to 1 pedal ratio
    • Includes: mounting studs, hardware, new clevis and pivot pin balance bar assembly

    Reverse Mount Dual Pedal Assembly Installation Instructions (PDF)

    Wilwood Spec Sheet 

    Data Sheet (PDF)

  • Wilwood 250-3677 Master Cylinder Adapter Kit
    Wilwood 250-3677 Master Cylinder Adapter Kit
    x
                

    Adapter kit includes boot, pushrod, and adapts Wilwood master cylinder 260-4893 to Wilwood clutch/brake pedal bracket or other pedals with a 2.23" vertical mount centerline or a 3.22" horizontal mount centerline.

    Aluminum construction with a black anodized finish.

  • Wilwood 340-11295 Adjustable Mount Pedal Assembly - Forward Mount
    Wilwood 340-11295 Adjustable Mount Pedal Assembly - Forward Mount
    x
                Wilwood’s new Adjustable Mount Pedal assembly  combines the brake  and clutch pedals together in one unit and positions  the master  cylinders inside the firewall, away from engine heat.
    • All aluminum frame
    • Forged aluminum pedal arms with ladder style construction
    • Adjustable pads allow fine-tuning of the pedal location and clearance.
    • 6.25 to 1 pedal ratio
    • Includes: mounting studs, hardware, new clevis and pivot pin balance bar assembly
    Instructions (PDF)

    Data Sheet (PDF)

  • TCI 600-6571-56 Under-Floor Manual Brake / Hydraulic Clutch Assembly
    TCI 600-6571-56 Under-Floor Manual Brake / Hydraulic Clutch Assembly
    x
                

    Want to put a manual transmission in your street rod?  These universal pedal assemblies offer a clean, simple way to mount your brake master cylinder and hydraulic clutch master cylinder to the frame, under the floor.  Kits include a bracket and pedals, plus new brake and clutch master cylinders.  Maximum brake pedal throw is 6", clutch pedal is 5.6".

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood 260-1874 Blue Disc Brake Residual Valve, 2 PSI
    Wilwood 260-1874 Blue Disc Brake Residual Valve, 2 PSI
    x
                

    These in-line pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in disc brake systems. Residual pressure valves are made from billet aluminum with 1/8" npt female threads for the inlet/outlet and color coded for easy identification. Ideal for drag racing, circle track, street rod and many off road applications.

    The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag.

    835-2601874 Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection

  • Speedway Hydraulic Clutch Pedal Kit, Swing Mount
    Speedway Hydraulic Clutch Pedal Kit, Swing Mount
    x
                
    • Speedway 3/4" small master cylinder w/ 3/8"-24 IFF outlet fitting
    • Speedway pull-type slave cylinder w/ 3/8"-24 IFF inlet fitting
    • 5/16" RH female heim
    • 7:1 ratio Wilwood swing mount clutch pedal
  • Pedal Mount Plate
    $14.99
    Product Rating: 5.00 Stars
    Pedal Mount Plate
    x
                

    A simple rigid steel mount for hanging your pedals. Fits all aluminum Wilwood, U.S. Brake, or Tilton brake/clutch pedals and master cylinders we sell.

  • Motive Products 0105 Pressure Brake Bleeder, Square Master Cylinders
    Motive Products 0105 Pressure Brake Bleeder, Square Master Cylinders
    x
                Please view the product's page for more information
            
  • Dirtworks IMCA Modified Pedal Kit
    Dirtworks IMCA Modified Pedal Kit
    x
                Dirtworks/Jet Pedal Kit (IMCA)

    Kit includes:
    • TriMaster Peda Assembly
    • Wilwood Aluminum Master Cylinders: 3/4", 7/8" & 1"
    • Brake Bias Cable
    • Side Mount Throttle Pedal
    • 25.5" Alum Throttle Linkage, 1/4" Ends

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.


  • Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1949-54 Chevy spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .380" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs
  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • Speedway Hydraulic Clutch Floor Mount Pedal Kit
    Speedway Hydraulic Clutch Floor Mount Pedal Kit
    x
                
    • Speedway 3/4" small master cylinder
    • Speedway pull-type slave cylinder
    • 5/16" RH female heim
    • 6:1 ratio Wilwood floor mount clutch pedal