Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"water pump brackets" Page 1 of 5

  • Small Block Chevy Power Steering Pump Bracket
    Small Block Chevy Power Steering Pump Bracket
    x
                

    This power steering pump bracket mounts a stock-style GM pump to a S/B Chevy block. Must be used with a short style water pump. Mounts on the lower left side. Bracket is zinc plated with threaded shaft. Designed to work with a '70-'82 GM pump that has a threaded pulley shaft, not a press-on style.

    Works with bolt-on or press-on pulleys with a mount spacing of 3.75". Due to the variety of pulley configurations, it is likely that you will have to space the pump/bracket for belt alignment.

    Note: This will NOT work when used on early 1970's Chevelle/Camaro chassis with a steering box.

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic kit
    • GM 602 & 604 Crate Engines
    • Assembly contains:
      • 7.2cc aluminum power steering pump
      • 4.2" aluminum power steering pulley
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Goodyear Gatorback belt
      • Hardware and detailed instructions

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

    Cast Iron Pump Tech (PDF)

    Cast Iron Pump Installation Instructions (PDF)

    New Pump Tips (PDF)

    Serpentine Pulley Offset (PDF)

  • Zips Small Block Chevy Water Pump Riser
    Zips Small Block Chevy Water Pump Riser
    x
                
    • Water pump riser solves the common problem of the fan being mounted too low on the radiator to be effective
    • Raises the pump and mechanical fan 5" higher in the engine compartment
    • Provides mounting surfaces for an A/C compressor and alternator
    • Riser housing comes with brackets and hardware
    • Water pump not included (use Chevy 250 L6 water pump)

    910-2306 Instructions (PDF)

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • Small Block Chevy Inboard Drive Kits, Alternator
    Small Block Chevy Inboard Drive Kits, Alternator
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator only kits include single groove pulleys.

    Note: S/B Chevy, short style water pump only.

  • Block Mount Power Steering Pump Bracket for Short Water Pump
    Block Mount Power Steering Pump Bracket for Short Water Pump
    x
                These power steering pump brackets are for short water pumps. For mounting Profile or Sweet Pump to small block Chevy V8. Bolt kit included. Anodized purple.
            
  • Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    x
                Please view the product's page for more information
            
  • Small Block Chevy Low Mount Alternator Bracket, Chrome
    Small Block Chevy Low Mount Alternator Bracket, Chrome
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Small Block Chevy Low Mount Alternator Bracket, Plain
    Small Block Chevy Low Mount Alternator Bracket, Plain
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Head Mount Power Steering Pump Bracket for Short Water Pump
    Head Mount Power Steering Pump Bracket for Short Water Pump
    x
                These power steering pump brackets are for short water pumps. For mounting Profile or Sweet Pump to small block Chevy V8. Bolt kit included. Anodized purple.
            
  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • F-Body LS1 High Mount P/S and Alternator Relocation Bracket
    F-Body LS1 High Mount P/S and Alternator Relocation Bracket
    x
                

    If you want to move your power steering pump and alternator up to the driver side head, this is the bracket for you. It allows you to retain your original LS1 alternator, balancer, A/C bracket and compressor.

    • Cap on an '00 F-Body LS1 P/S Reservoir is 1-3/4" higher than the top of the Throttle Body
    • Centerline of water pump pulley to outside edge of alternator = 16"

    Includes a billet aluminum bracket, belt and hardware.

    Installation Instructions (PDF) 

  • Small Block Chevy Lower Alternator Bracket, Stainless
    Small Block Chevy Lower Alternator Bracket, Stainless
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket and spacers
    • Does NOT Include bolts
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • 1965-68 B/B Chevy Alternator Bracket
    1965-68 B/B Chevy Alternator Bracket
    x
                    For 1965-68 B/B Chevy with short water pump. Mounts alternator on driver's side.    
            
  • Billet FM2221PC BBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2221PC BBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Powermaster 801 High Mount Alternator Bracket, Small Block Chevy
    Powermaster 801 High Mount Alternator Bracket, Small Block Chevy
    x
                

    This bracket will attach to either side of the motor via the two bolts attaching the water pump. In most cases, this drive system will not interfere with any existing setup. This is a replacement bracket for kit #91068120.

    • Mounts to either side of the motor via the two bolts attaching the water pump
    • Does not interfere with existing belt drive systems
    • Replacement bracket for #91068120
    • Aluminum
    • Hardware included

     

  • Billet FM2222PC B/B Chevy Mid Mount Serpentine Conversion Kit Press-On
    Billet FM2222PC B/B Chevy Mid Mount Serpentine Conversion Kit Press-On
    x
                Please view the product's page for more information
            
  • KRC 31611000 Short Water Pump Power Steering Mounting Bracket
    KRC 31611000 Short Water Pump Power Steering Mounting Bracket
    x
                Ford mounting bracket kit for short water pump, attaches any KRC steering pump to the left cylinder head. This bracket is for 260/289/302 short deck blocks. Matches most small block Ford head patterns. Since bolt sizes vary over the years, they are not included. Spacer kit available separately.

    466-30069 Dimensions (PDF)

  • KRC 31621000 Short Water Pump Power Steering Mounting Bracket
    KRC 31621000 Short Water Pump Power Steering Mounting Bracket
    x
                Ford mounting bracket kit for short water pump, attaches any KRC steering pump to the left cylinder head. One bracket is for 351/400 tall deck blocks. Matches most small block Ford head patterns. Since bolt sizes vary over the years, they are not included. The spacer kit available separately.

    466-30070 Dimensions (PDF)

  • Bills Hot Rod Co. Big Block Chevy Power Steering Brackets
    Bills Hot Rod Co. Big Block Chevy Power Steering Brackets
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole. Accepts stock GM Saginaw power steering pumps with attached reservoir.

    Available in chrome or black painted.

  • 1976-86 Small Block Chevy Alternator Bracket
    1976-86 Small Block Chevy Alternator Bracket
    x
                          Fits 1976-86 S/B Chevy V8's with long water pump. Chrome plated.           
            
  • Small Block Chevy Inboard Drive Kits, Alternator & AC
    Small Block Chevy Inboard Drive Kits, Alternator & AC
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator and A/C kits include dual groove pulleys.

    Bracket kit works with dual quad & 3-2 low rise intakes.

    Note: S/B Chevy, short style water pump only.

  • 1999-06 Vortec LS High Mount P/S and Alternator Mount Bracket
    1999-06 Vortec LS High Mount P/S and Alternator Mount Bracket
    x
                

    If you want to move your power steering pump and alternator up to the driver side head, this is the bracket for you. It allows you to retain your original Vortec truck alternator, balancer, A/C bracket and compressor.

    Includes a billet aluminum bracket, belt and hardware.

    Installation Instructions (PDF)  

  • Big Block Chevy Power Steering Pump Bracket
    Big Block Chevy Power Steering Pump Bracket
    x
                This power steering pump bracket mounts a stock-style GM pump to a B/B   Chevy block. Must be used with a short style water pump. Mounts on the   lower left side. Bracket is zinc plated with threaded shaft. Requires   1970-82 GM pump with threaded shaft.
            
  • Small Block Chevy Alternator Slide Bracket
    Small Block Chevy Alternator Slide Bracket
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your alternator. Slide bracket attaches at #1 cylinder exhaust port and works in conjunction with base bracket 720-9254.

    • Chrome plated steel
    • Requires base bracket 720-9254 & arm 910-67850
    • Mounts to driver side of engine
    • Not for use with original generators 
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • KRC Power Steering 77525110 CT525 GM LS Head Mounted Steering Pump Kit
    KRC Power Steering 77525110 CT525 GM LS Head Mounted Steering Pump Kit
    x
                Please view the product's page for more information
            
  • Small Block Chevy Chrome Alternator Base Brackets
    Small Block Chevy Chrome Alternator Base Brackets
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your generator/alternator. Bracket base attaches at #1 cylinder exhaust port and works in conjunction with slide bracket 720-9008.

    • Chrome plated steel
    • Requires slide bracket 720-9008
    • Mounts to driver side of engine
    • Not for use with stock exhaust manifolds
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • KRC KIT16320015 Serpentine Drive Kit-GM-Block Mt Pump/Idler Tensioner
    KRC KIT16320015 Serpentine Drive Kit-GM-Block Mt Pump/Idler Tensioner
    x
                Please view the product's page for more information
            
  • KRC KIT16312610 Serpentine Drive Kit-S/B Chevy, Head Mt. w/o P.S. Pump
    KRC KIT16312610 Serpentine Drive Kit-S/B Chevy, Head Mt. w/o P.S. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic crate engine kit
    • Designed for GM 602 & 604 Crate Engines
    • Assembly contains:
      • Aluminum driver side cylinder head mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Hardware and detailed instructions

    Serpentine Pulley Offset (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • KRC KIT16312615 Serpentine Drive Kit-S/B Chevy, Block Mt. w/o P.S Pump
    KRC KIT16312615 Serpentine Drive Kit-S/B Chevy, Block Mt. w/o P.S Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic crate engine kit
    • Designed for GM 602 & 604 Crate Engines
    • Assembly contains:
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Hardware and detailed instructions

    Serpentine Pulley Offset (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Small Block Chevy Upper Alternator Bracket, Plain
    Small Block Chevy Upper Alternator Bracket, Plain
    x
                

    Positions alternator just above the intake, between passenger side valve cover and water outlet. Designed to mount GM "Delco" alternators on S/B Chevy V8 using '55-'68 short style water pumps.

    Alternator Bracket Illustration (GIF)

    916-67899 Instructions (PDF)

  • Single Groove Power Steering Pump Pulley, Billet Aluminum, Short Pump
    Single Groove Power Steering Pump Pulley, Billet Aluminum, Short Pump
    x
                

    Power steering pump pulley for use with short-style (1955-1968) water pumps. Available in plain billet only.

    • For use with our 91032908 power steering pump 
    • Use with 2-groove lower crank pulley when using P/S bracket 91667920
    • Pulley runs off outer groove of lower crank pulley
    • 5/8" shaft hole w/ key way
    • Chamfered on the back side to allow clearance on pumps
  • KSE Racing KSC1056 Tandem Pump Bracket for Small Block Chevy
    KSE Racing KSC1056 Tandem Pump Bracket for Small Block Chevy
    x
                Mount bracket for KSE Tandem Power Steering and Fuel pumps. Pump mounts off water pump on Small Block Chevy. 
            
  • Black Upper Double Groove Water Pump Pulley, Chevy V8
    Black Upper Double Groove Water Pump Pulley, Chevy V8
    x
                Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
    • Chevy V8 Dual Groove Short Water Pump Pulley
    • Satin black finish
    • Replaces GM # 3995642
    • 6" diameter
  • Small Block Chevy Lower Alternator Bracket, Plain
    Small Block Chevy Lower Alternator Bracket, Plain
    x
                

    Mounts GM "Delco" style alternators beside oil pan at left front corner of your small block Chevy V8. Works with the short ('55-'68) water pump. Includes bracket and spacer.

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5