Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"washer head bolt" Page 1 of 3

  • Offenhauser Flathead Cylinder Head Stud Kit
    Offenhauser Flathead Cylinder Head Stud Kit
    x
                

    Highly recommended for all 1939-53 Flathead Ford/Mercury with aluminum heads. Flathead decks are thin and their threads are easily stripped. The outer end of these Grade 8 studs have fine threads and with the hardened washers (included) which prevent galling and ensure accurate torque readings.

    Full set of head studs, nuts and washers for one engine. Specify year of engine: 1939-48 or 1949-53.

    560-13953 Instructions (PDF)

  • Manley 42171 Small Block Chevy Head Bolts
    Manley 42171 Small Block Chevy Head Bolts
    x
                

    Heavy duty design, longer than stock, for use with head bolt washers. 

    • 180,000 PSI material
    • Longer than stock for use with washers
    • Improved wrenchability with 1/2" hex head

    Order one set per head (two sets required per motor). Washers sold separately. 

  • Manley 42102 Head Bolt Washers
    Manley 42102 Head Bolt Washers
    x
                These hardened steel 7/16" washers ensure proper torque readings. Pack of 34 pieces outfits one Small Block Chevy engine.
            
  • Speedway Small Block Chevy Stainless Engine Bolt Kit
    Speedway Small Block Chevy Stainless Engine Bolt Kit
    x
                

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.

    Kit includes:

    • Intake manifold bolts
    • Timing cover bolts
    • Oil pan bolts
    • Short water pump bolts
    • Long water pump bolts
    • TH350/400 transmission pan bolts
    • Exhaust header bolts
    • Water neck bolts, 1955-1965
    • Water neck bolts, 1966-1986
    • Flywheel cover bolts
  • ARP Fasteners 234-2501 Small Block Chevy Balancer Bolt & Washer
    ARP Fasteners 234-2501 Small Block Chevy Balancer Bolt & Washer
    x
                Made from 8740 chromoly. Bolt feature increased diameter, 3/4" 12 point head for improved accessibility and easy wrenching. Hardened parallel ground washer prevents galling while promoting even torque loading. 170,000 PSI. 

    For S/B Chevy.
  • Flathead Cylinder Head Stud Kit
    Flathead Cylinder Head Stud Kit
    x
                

    Performance engine builders know that head studs are superior to bolts, and this is especially the case on Flathead Ford and Mercury V8s. Flathead decks are thin and their threads are easily stripped. By installing studs, you avoid damaging the threads in the block through repeated use. The combination of the studs' fine outer threads and hardened washers also prevents galling and ensures accurate torque readings, particularly on aluminum heads.

    • Studs utilize superior "pull down torque"
    • Properly fastens and torques both aluminum and iron heads

    910-15310 Instructions (PDF)

  • Bolt and Washer Kit for Claimer Oil Pan
    Bolt and Washer Kit for Claimer Oil Pan
    x
                

    Allen button-head bolt set with lock washers for Speedway Claimer small block Chevy oil pans.

  • Swindell Series by Ti64 Ti Sprint Car Front Axle Bolt Kit
    Swindell Series by Ti64 Ti Sprint Car Front Axle Bolt Kit
    x
                

    This custom kit was put together for the Swindell Series front end kits (940-358/940-368). This is included in those axle kits, or buy it as a replacement set. 

    Kit includes:

    • (2)  3/8" AN Washer
    • (2) 3/8"-24 x 1" Hex Head Bolt, LF Caliper to Bracket
    • (3) 1/2"-20 x 1" Countersunk Screw, LF Rotor
    • (2) 1/2"-20 x 2" Hex Head Bolt, LF Steering Arm to Spindle
    • (2) 1/2"-20 x 1.5" Hex Head Bolt, RF Steering Arm
    • (1) 1/2"-20 x 2.75" Hex Head Bolt, Sway Bar to Frame
    • (4) 1/2"-20 x 4" Hex Head Bolt, Tie Rod/Drag Link
    • (3) 1/2"-20 x 1.5" Hex Head Bolt, Axle to Radius Rods
    • (4) 1/2" AN Washer
    • (9) 1/2"-20 Nylock 1/2" Height Locknuts
  • ARP Fasteners 400-1201 Stainless Steel Header Bolts, 12 Piece
    ARP Fasteners 400-1201 Stainless Steel Header Bolts, 12 Piece
    x
                ARP 12 point head bolt kit, 3/8"-16 x .750" UHC. Includes washers. Uses 3/8" 12 pt. socket. 170,000 PSI. 
            
  • Offy/Sharp Ford Flathead Intake Bolt Kit
    Offy/Sharp Ford Flathead Intake Bolt Kit
    x
                

    For what we charge for these premium stainless steel socket head bolts, you can't afford not to use them on your Offenhauser or Sharp intake!

    • (20) 3/8"-16 x 1-1/4" USS Stainless Socket Head Cap Screws
    • (20) 3/8" AN Stainless Washers
  • TI64 187 Titanium Beadlock Bolt Kit, 1/4 Inch-20 x 1 Inch, Micro Sprint
    TI64 187 Titanium Beadlock Bolt Kit, 1/4 Inch-20 x 1 Inch, Micro Sprint
    x
                This 24pc kit of (12) hex flange bolts and (12)  thin steel nuts is arguably the best titanium investment for Micro  Sprint Racers. Not only do these meet our $200/lb-saved rule of thumb,  but the large rotating diameter where these bolts are applied makes for  exceptional return-on-investment in speed!
    • 12 of 1/4"-20 x 1", Hex Head Bolt
    • 12 of 1/4" AN Thin Washer, Steel
  • Aluminum Body Washers W/ Bolt
    Aluminum Body Washers W/ Bolt
    x
                
    • Countersunk for a flat head screw
    • 1-1/4" diameter
    • 1/4" screw included
  • Bolt Kit for 1937-48 Ford Spindle Flat Steering Arms
    Bolt Kit for 1937-48 Ford Spindle Flat Steering Arms
    x
                

    For use with our '37-'48 Ford style spindles, steering arms, and brake brackets. 

    Kit includes:

    • (4) 1/2"20 x 2" fine thread button head SCS SAE bolts
    • (4) 1/2" SAE Hex Lock Nuts
    • (4) 1/2" Thru hard washers
  • ARP Header Bolt & Stud Kit Set/16
    ARP Header Bolt & Stud Kit Set/16
    x
                ARP stud kits have 3/8" studs, nuts and washers.  Set of 16. Includes 12 point nut.
            
  • ARP Fasteners 154-3601 S/B Ford Head Bolt Set - 6 Point
    ARP Fasteners 154-3601 S/B Ford Head Bolt Set - 6 Point
    x
                

    ARP High Performance head bolts are available with a reduced wrenching hex and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. Bolts are rated to 180,000 psi (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers. 

    Fits 289-302 with factory heads or Edelbrock heads 60259 & 60379.

  • TI64 140 Titanium Wheel Center Bolt Kit, Hex Head Style
    TI64 140 Titanium Wheel Center Bolt Kit, Hex Head Style
    x
                

    This wheel center bolt kit contains (15) 5/16"-24 x 3/4" Ti64 button head bolts and (15) thin stainless AN washers. This kit is used for Oval and Drag race wheel centers.

    • Includes:
      • (15) 5/16"-24 x 3/4" Ti64 button head bolts
      • (15) thin stainless AN washers
    • Used for Oval and Drag race wheel centers
  • TI64 220 Titanium Wheel Center Bolt Kit, Button Head Style
    TI64 220 Titanium Wheel Center Bolt Kit, Button Head Style
    x
                

    This wheel center bolt kit contains (10) 5/16"-24 x 3/4" Ti64 button head bolts and (10) thin stainless AN washers. This kit is used for Oval and Drag race wheel centers.

    • Includes:
      • (10) 5/16"-24 x 3/4" Ti64 button head bolts
      • (10) thin stainless AN washers
    • Used for Oval and Drag race wheel centers
  • ARP Fasteners 400-1202 Stainless Steel Header Bolts, 16 Piece
    ARP Fasteners 400-1202 Stainless Steel Header Bolts, 16 Piece
    x
                

    ARP 12 point head bolt kit, 3/8"-16 x .750" UHC. Includes washers. Uses 3/8" 12 pt. socket. 170,000 PSI. 

  • ARP Fasteners 134-3601 SBC Cylinder Head Bolts
    ARP Fasteners 134-3601 SBC Cylinder Head Bolts
    x
                

    High Performance head bolts are available with a reduced wrenching hex head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 psi (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers.  Set of 34.

    Fits:

    • 23° Cast iron OEM
    • Gen III Vortec/Truck
    • Most Edelbrock
    • LT-AFR
    • Brodix-8,-10,-11,-11xb 
    • LT-1 
    • Dart Pro-1
    • Trick Flow heads
    • Most World Products heads
  • ARP Fasteners 135-3601 BB Chevy Head Bolts - 6 Point
    ARP Fasteners 135-3601 BB Chevy Head Bolts - 6 Point
    x
                High Performance head bolts are available with a reduced wrenching hex or 12-point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing.  All High Performance Series bolts are 180,000 psi (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers.  Fit 396, 402, 427 and 454 Cast iron OEM.
            
  • ARP Fasteners 234-4601 Small Block Chevy Undercut Head Studs
    ARP Fasteners 234-4601 Small Block Chevy Undercut Head Studs
    x
                Install an ARP Small Block Chevy (SBC) head stud kit to enhance cylinder head sealing, ensure consistent torque values and help prevent damage to threads in the block. 

    All kits come with aerospace-quality nuts and parallel-ground, hardened washers.  Kits include undercut short studs that all but eliminate head gasket failure. Undercut studs have a narrowed area on the center of the stud shank. These undercuts add more tensile strength to the stud. 190,000 PSI.

    Not for raised runner heads.


  • ARP 135-3603 Big Block Chevy w/Iron and Aluminum Dart Hex Cylinder Head Bolts
    New
    ARP 135-3603 Big Block Chevy w/Iron and Aluminum Dart Hex Cylinder Head Bolts
    x
                

    High Performance head bolts are available with a reduced wrenching hex or 12-point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing.  All High Performance Series bolts are 180,000 psi (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers.  Fits 396, 402, 427 and 454 B/B Chevy with Iron & Aluminum Dart and other raised runner cylinder heads.

    • Big Block Chevy
    • Fits Flo Tech aluminum heads and others with raised runners
  • Flathead Ford Tube Header Bolt Kit
    Flathead Ford Tube Header Bolt Kit
    x
                Premium stainless steel socket head bolts for your Flathead Ford tube headers. Each kit includes stainless steel AN washers.
            
  • TI64 176 Titanium Button-Head Fuel Top Plate Bolt Kit
    TI64 176 Titanium Button-Head Fuel Top Plate Bolt Kit
    x
                Secure your fuel cell top plates with these titanium bolt kits. They include steel washers and button-head style socket screws.
    • 12 of 1/4" AN Thin Washer, Steel
    • 12 of 1/4"-28 x 7/8" Button-Head Socket Screw
  • Chevy Short Water Pump Bolt Kit, Stainless Steel
    Chevy Short Water Pump Bolt Kit, Stainless Steel
    x
                

    These stainless steel bolt kits will dress up your Small Block Chevy engine while giving it corrosion-resistant performance. Allen head.

    This includes:

    • 3 each 3/8-16 x 1 3/4 Stainless Steel Socket Head Cap Screw
    • 1 each 3/8-16 x 2 1/2 Stainless Steel Socket Head Cap Screw
    • 4 each 3/8 AN Stainless Steel Flat Washers
  • TI64 353 Titanium Beadlock Bolt Kit, 5/16-18 x 1 Inch Thread
    TI64 353 Titanium Beadlock Bolt Kit, 5/16-18 x 1 Inch Thread
    x
                This 32pc kit of (16) hex bolts and (16) thin steel  washers is arguably the best titanium investment for sprint and midget  racers. Not only do these meet our $200/lb saved rule of thumb, but the  large rotating diameter where these bolts are applied makes for  exceptional return on investment in speed!
    • Kit includes
      • (16) of 5/16"-18 x 1", hex head bolts
      • (16) of 5/16" AN thin steel washers
  • Edelbrock Ford Flathead Intake Bolt Kit
    Edelbrock Ford Flathead Intake Bolt Kit
    x
                

    Premium stainless steel socket head bolts for your Edelbrock intake manifolds. Each kit includes stainless steel AN washers.

    Kit Includes: 

    • (14)  3/8"-16 x 1-1/2"  bolts 
    • (2)  3/8"-16 x 2"  bolts 
    • (16)  3/8" washers
  • TI64 138 Titanium Beadlock Bolt Kit, 5/16-18 x 1-1/8 Inch
    TI64 138 Titanium Beadlock Bolt Kit, 5/16-18 x 1-1/8 Inch
    x
                This 32pc kit of (16) hex bolts and (16) thin steel  washers is arguably the best titanium investment for sprint and midget race cars.  Not only do these meet our $200/lb saved rule of thumb, but the large  rotating diameter where these bolts are applied makes for exceptional  return on investment in speed!
    • Kit includes
      • (16) of 5/16"-18 x 1-1/8" hex head bolts
      • (16) 5/16" AN thin steel washers
  • TI64 139 Titanium Beadlock Bolt Kit, 5/16-18 x 1-1/4 Inch Thread
    TI64 139 Titanium Beadlock Bolt Kit, 5/16-18 x 1-1/4 Inch Thread
    x
                This 32pc kit of (16) hex bolts and (16) thin steel  washers is arguably the best titanium investment for sprint and midget  racers. Not only do these meet our $200/lb saved rule of thumb, but the  large rotating diameter where these bolts are applied makes for  exceptional return on investment in speed!
    • Kit includes 
      • (16) of 5/16"-18 x 1 1/4" hex head bolts
      • (16) of 5/16" AN thin steel washers
  • ARP 130-3105 Chevy V6 / V8 Mount-to-Frame Motor Mount Bolt Kit, Hex Head
    New
    ARP 130-3105 Chevy V6 / V8 Mount-to-Frame Motor Mount Bolt Kit, Hex Head
    x
                

    This ARP motor mount bolt kit comes with 2 black oxide finish bolts and washers. They are designed to bolt the motor mount to the frame.

    • Chevy V6 & V8
    • Hex fastener head style
    • Black oxide finish
    • Made in the U.S.A
  • Small Block Chevy Oil Pan Bolt Kit, Chrome
    Small Block Chevy Oil Pan Bolt Kit, Chrome
    x
                

    Chrome oil pan bolt kit for Small Block Chevy (SBC). For use with steel oil pans ONLY. Will not fit cast aluminum oil pans.

    Kit includes:

    • (14) qty. 1/4"-20 x 1/2" hex head cap screws
    • (4) qty. 5/16"-18 x 5/8" hex head cap screws
    • (18) qty. flat washers 
  • ARP Fasteners 235-2501 Big Block Chevy Balancer Bolt with Washer
    ARP Fasteners 235-2501 Big Block Chevy Balancer Bolt with Washer
    x
                8740 Chromoly. Bolt feature increased diameter, 12 point head for improved accessibility and easy wrenching.  Hardened parallel ground washer prevents galling while promoting even torque loading. 170,000 PSI. 

    For B/B Chevy, use 3/4" 12 point socket.

    "Underhead" length is 2.470".
  • ARP Fasteners 130-2201 Chevy Pressure Plate Bolts
    ARP Fasteners 130-2201 Chevy Pressure Plate Bolts
    x
                

    The importance of pressure plate bolts in a racing or hi-performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed these special High Performance Series pressure plate bolts that are application specific to ensure the optimum grip length. 

    • Made from a premium grade chromoly
    • Hardened to a nominal tensile strength of 180,000 psi
    • Large diameter, low-profile design
    • 9/16" head
    • Complete with washers
  • Flathead Ford Fenton Headers Bolt Kit
    Flathead Ford Fenton Headers Bolt Kit
    x
                Premium stainless steel socket head bolts for your Flathead Ford cast Fenton Headers. Each kit includes stainless steel AN washers.
            
  • High Collar Steel Lock Washers, 3/8 Inch, Set/12
    High Collar Steel Lock Washers, 3/8 Inch, Set/12
    x
                High collar lock washers for header bolts. Use when standard lock washers are too large. Heat-treated steel. Set of twelve.
            
  • High Collar Stainless Steel Lock Washers, 3/8 Inch, Set/12
    High Collar Stainless Steel Lock Washers, 3/8 Inch, Set/12
    x
                High collar lock washers for header bolts. Use when standard lock washers are too large. Set of twelve.
            
Goto Previous PagePrevious Page
1 2 3