Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"universal mounting plates" Page 1 of 2

  • Universal Steering Column Floor Mount Plate
    Universal Steering Column Floor Mount Plate
    x
                

    Universal lower floor mount plate works on all 1-3/4", 2", or 2-1/4" diameter steering columns by simply removing the locking inter rings to the size of your column. Made out of chrome-plated aluminum for a clean finish. 

    Measures 4-1/2" O.D.

    • 2-1/4" column can make it to about 10 degrees 
    • 2" column can make it to about 17 degress
    • 1-3/4" column can make it to about 30 degrees

     

  • Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    x
                

    Mr.Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

    • Quality chrome finish
    • Fits 265-400 SBC engines
    • Mounts stock OEM pump
    • Includes gasket
  • Universal Seat Mount Plates
    $12.99
    Product Rating: 4.80 Stars
    Universal Seat Mount Plates
    x
                These universal seat mount plates will allow you to install almost any bucket seat in your car. Purchase either the complete assembly (910-70024) or these individual plates as needed. Since every application is different, some modification may be required. 

    910-70027 Instructions (PDF)

     

  • Low Back Vinyl Seat
    $229.99
    Product Rating: 4.61 Stars
    Low Back Vinyl Seat
    x
                

    If you are like us, it's hard to find seats small enough to fit in your car. These seats are 24" tall, 20-1/2" wide and 20" deep overall and the back adjusts to your preference. The seat back will also fold forward for easy access to the rear of the vehiclce. Each seat includes a pair of sliders, but universal mount # 910-8115-side is sold separately (shown below).

    • @ front of seat, 7 3/4" from mounting plate to top of cusion
    • @ rear of seat,  5 1/2" from mounting plate to top of cusion
    Seat bottom features female threaded mounting holes with the following dimension that corresponds to the included seat sliders:
    • 14-1/2" center to center spacing for side to side bolt pattern 
    • 11-9/16" center to center spacing for front to back bolt pattern

    Choose black or beige vinyl and LH or RH side. 

  • Universal Fit Firewall Mount Brake Pedal Assembly
    Universal Fit Firewall Mount Brake Pedal Assembly
    x
                Use this bracket when you want to install a firewall mounted master cylinder pedal. These universal brackets mount both the pedal and master cylinder. Works with manual master cylinders (with 3-1/4" bolt centers) or power boosters (with 3-3/8" x 3-3/8" bolt pattern). Made from laser-cut 1/4" thick steel plate. 
    • Brake pedal assembly
    • Mounts neatly on your firewall
    • Universal fit
    • 6:1 pedal ratio
    • Bronze bushings provide smooth operation
    • Zinc plated finish for corrosion resistance
    • Made in the U.S.A.
    • Pedal pad sold separately
    Dual brake/clutch master cylinder pedal assemblies are also available under p/n 91631992.
  • AFCO 80197 Universal Electric Fan Mounting Kit
    AFCO 80197 Universal Electric Fan Mounting Kit
    x
                

    This neat kit allows you to mount an electric fan to your street rod radiator. Works great with AFCO electric fans.

    The max mounting distance on the plates of this kit is 17".

    Instructions (PDF) 

  • 1937-1938 Chevy LED Tail Light Assembly
    1937-1938 Chevy LED Tail Light Assembly
    x
                

    Use these brilliant polished stainless steel LED tail lights to upgrade your 1937-1938 Stovebolt or hang 'em on the back of a T-bucket for a different look! Choose left or right.

    • 45 super bright red LED's
    • Polycarbonate lens
    • Polished stainless steel housing
    • For 12V systems
    • Left-side taillight has licence plate light

    This taillight works best with a 1937-38 mount bracket. If you desire a universal-mount light, 91137013 pickup housings have an almost flat back for ease of mounting.

    1937-1938 Chevy Tail Light Installation Instructions (PDF)

  • Universal Seat Sliders
    $24.99
    Product Rating: 4.42 Stars
    Universal Seat Sliders
    x
                

    These universal seat sliders allow you to easily adjust the bucket seats in your car. Since every application is different, some modification may be required.

    Directly fits Speedway seat frame and mounting plates (also available as a complete kit).

    910-70026 Instructions (PDF)

  • Universal Fit Firewall Mount Clutch/Brake Pedal Assembly
    Universal Fit Firewall Mount Clutch/Brake Pedal Assembly
    x
                

    Use this bracket when you want to install a firewall mounted master cylinder pedal. These universal brackets mount the pedal, brake master cylinder and clutch master cylinder. Works with manual brake master cylinders (with 3-1/4" bolt centers) and clutch master cylinders (with 2-1/4" bolt centers). Made from laser-cut 1/4" thick steel plate.

    • Brake and clutch pedal assembly
    • Mounts neatly on your firewall
    • Universal fit
    • 6:1 pedal ratio
    • Bronze bushings provide smooth operation
    • Zinc plated finish for corrosion resistance
    • Made in the U.S.A.
    • Pedal pads sold separately
    Brake-only pedal assemblies are also available under p/n 91631991.
  • Chrome Universal Alternator Bracket Arm
    Chrome Universal Alternator Bracket Arm
    x
                

    Chrome plated steel arm can be shortened and redrilled for specific application.

    • 13-1/4" from bottom mount hole to max adjustment
    • 10-5/8" from bottom mount hole to min adjustment

     

  • Universal Wind Wing Brackets
    $79.99
    Product Rating: 5.00 Stars
    Universal Wind Wing Brackets
    x
                

    Universal wind wing brackets for most 1930-1935 Fords and others. Fully chrome plated.

    Designed to screw into windshield posts. Brackets only. Set of four. Glass not included.

    • 5/16" fine thread
    • Main body (or wing): 2-15/16"
    • From bottom mounting face to tip of main mounting body: 1-3/8"
  • Universal Leaf Spring Plate
    $29.99
    $34.99
    Universal Leaf Spring Plate
    x
                Our universal leaf spring plate features a 1/2" mounting boss on both the front and rear allowing it to work on either side or to run two shocks.

    U-bolt holes are 9/16" I.D. Will accept a 3" spring.
  • Big Block Ford Current Big Block Motor Mount
    Big Block Ford Current Big Block Motor Mount
    x
                

    Mounts 1969-up 429 and 460 engines in most frames from 28"-38" wide. Just trim to width and either weld it directly to frame or to the 3 hole flanges (included) for bolt-in convenience. Black powder coat finish.

    720-9313 Instructions (PDF)

     

     

    NOTE: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Chrome Deep Dish Performance Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.
    Chrome Deep Dish Performance Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. This chrome plated steel 4 barrel carburetor air cleaner has a 14" diameter with a 3" tall paper filter element and fits carbs with 5-1/8" necks. This easy to install air cleaner also comes with mounting hardware and PVC smog fitting adapter.

    1. This air cleaner has a "drop" base, meaning that the bottom of the air cleaner sits 1-1/4" below the top flange of the carb.
    2. The top of the air cleaner sits 2-5/8" above the top flange of the carb.

    Chrome Deep Dish Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.

    • Chrome plated steel
    • 14" diameter and 3" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • Includes stud and wing nut
    • Triple process plating for brightest finish and long life
    • Non-restricting, flame proof filter
    • Performance designed for increased breathing
    • Designed for universal applications
    • Fits: cars, trucks, minis, 4x4s, street rods, and RV's

     

  • Universal Lower Leaf Spring Plate
    Universal Lower Leaf Spring Plate
    x
                These universal lower leaf spring plates include mounts for shocks and a sway bar. LH and RH.
            
  • Kirkey 99200 Seat Mounting Bracket Kit
    Kirkey 99200 Seat Mounting Bracket Kit
    x
                

    From America's leader in seat manufacturing comes this strong, lightweight frame for your seats. Don't compromise your safety with a home-made frame.

    This is a universal seat mount made for installing aluminum bucket seats in IMCA modified race cars. It is made to anchor into the roll cage tubing and requires fabrication to fit each particular application.

    This kit will give you the safest mounting possible and save you hours of work, too. By simply rotating the tubes, you can mount this kit directly to the main hoop and door bars. 

    910-70200 Instructions (PDF)

  • Chrome Deep Dish Performance Air Cleaner, 14 x 2 Inch, 4 Barrel Carb.
    Chrome Deep Dish Performance Air Cleaner, 14 x 2 Inch, 4 Barrel Carb.
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners.  This chrome plated steel 4 barrel (5-1/8" neck) air cleaner has a 14" diameter and 2" tall paper filter element. There is no "drop" to the base of this air cleaner, meaning the bottom of the cleaner is at the same height as the top of the carb.  This easy to install air cleaner comes with mounting hardware and PVC smog fitting.

    Chrome Deep Dish Performance Air Cleaner

    • Chrome plated steel
    • 14" diameter and 2" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • Includes stud and wing nut
    • Triple process plating for brightest finish and long life
    • Non-restricting, flame proof filter
    • Performance designed for increased breathing
    • Designed for universal applications
    • Fits: cars, trucks, minis, 4x4s, street rods, and RV's

     

  • Wilwood 120-11576 Forged Narrow Dynalite Caliper 1.38 In Pis 1.25 In
    Wilwood 120-11576 Forged Narrow Dynalite Caliper 1.38 In Pis 1.25 In
    x
                

    Wilwood's new Forged Narrow Mount Dynalite (FNDL) calipers are ideal for and widely used in many competition applications including late models,modifieds, sprints, off road and road racing. Computer generated design and stress analysis technology, is the latest innovation from Wilwood providing substantial improvements in strength and performance over all comparable caliper models.

    Forged Narrow Mount Dynalites are the strongest calipers in the class. FNDL calipers are a direct replacement for all previous Wilwood NDL’s and similar competitive brands with 3.50" centered mounting tabs. A total of five bolts provide superior bridge strength and positive retention of the top loaded 7816 or 7216 type brake pads. The full range of PolyMatrix pad compounds is available to match the brake response and heat range requirements of any competition application.

    • Strongest calipers in the class
    • 3.50" centered mounting tabs
    • Superior bridge strength and positive retention

    Wilwood FNDC Product Data Sheet (PDF)

  • Chrome Deep Dish Performance Air Cleaner, 14 x 4 Inch, 4 Barrel Carb.
    Chrome Deep Dish Performance Air Cleaner, 14 x 4 Inch, 4 Barrel Carb.
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. This chrome plated steel 4 barrel carburetor air cleaner has a 14" diameter with a 4" tall paper filter element and fits carbs with 5-1/8" necks. This easy to install air cleaner also includes a tri-bar wing nut, a mount stud and an adaptor for the PCV inlet hose.

    1. This air cleaner has a "drop" base, meaning that the bottom of the air cleaner sits 1-1/4" below the top flange of the carb.
    2. The top of the air cleaner sits 2-5/8" above the top flange of the carb.

    Chrome Deep Dish Air Cleaner, 14 x 4 Inch, 4 Barrel Carb.

    • Chrome plated steel
    • 14" diameter and 3" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • stud and nut included
    • Triple process plating for brightest finish and long life
    • Non-restricting, flame proof filter
    • Performance designed for increased breathing
    • Designed for universal applications
    • Fits: cars, trucks, minis, 4x4s, street rods, and RV's

     

  • Wilwood 120-11575 Forged Narrow Dynalite Caliper 1.38 In Pis .81 In Ro
    Wilwood 120-11575 Forged Narrow Dynalite Caliper 1.38 In Pis .81 In Ro
    x
                

    Wilwood's new Forged Narrow Mount Dynalite (FNDL) calipers are ideal for and widely used in many competition applications including late models,modifieds, sprints, off road and road racing. Computer generated design and stress analysis technology, is the latest innovation from Wilwood providing substantial improvements in strength and performance over all comparable caliper models.

    Forged Narrow Mount Dynalites are the strongest calipers in the class. FNDL calipers are a direct replacement for all previous Wilwood NDL’s and similar competitive brands with 3.50" centered mounting tabs. A total of five bolts provide superior bridge strength and positive retention of the top loaded 7816 or 7216 type brake pads. The full range of PolyMatrix pad compounds is available to match the brake response and heat range requirements of any competition application.

    • Strongest calipers in the class
    • 3.50" centered mounting tabs
    • Superior bridge strength and positive retention

    83512011575 Specs (GIF)

    Wilwood FNDC Product Data Sheet (PDF)

  • Wilwood 120-11572 Forged Narrow Dynalite Caliper 1.75 In Pis .81 In Ro
    Wilwood 120-11572 Forged Narrow Dynalite Caliper 1.75 In Pis .81 In Ro
    x
                

    Wilwood's new Forged Narrow Mount Dynalite (FNDL) calipers are ideal for and widely used in many competition applications including late models,modifieds, sprints, off road and road racing. Computer generated design and stress analysis technology, is the latest innovation from Wilwood providing substantial improvements in strength and performance over all comparable caliper models.

    Forged Narrow Mount Dynalites are the strongest calipers in the class. FNDL calipers are a direct replacement for all previous Wilwood NDL’s and similar competitive brands with 3.50" centered mounting tabs. A total of five bolts provide superior bridge strength and positive retention of the top loaded 7816 or 7216 type brake pads. The full range of PolyMatrix pad compounds is available to match the brake response and heat range requirements of any competition application.

    • Strongest calipers in the class
    • 3.50" centered mounting tabs
    • Superior bridge strength and positive retention

    83511572 Specs (GIF)

    Wilwood FNDC Product Data Sheet (PDF)

  • Speedway 1941-1948 Ford Mustang II Deluxe Steel Crossmember
    Speedway 1941-1948 Ford Mustang II Deluxe Steel Crossmember
    x
                Please view the product's page for more information
            
  • Univeral Seat Frame Only
    $24.99
    Product Rating: 4.86 Stars
    Univeral Seat Frame Only
    x
                

    These universal seat mounting frames will allow you to install bucket seats almost any car. Purchase either the complete assembly with sliders and mounting plates (910-70024) or individual parts as needed.

    Since every application is different, some modification may be required.

    910-70025 Instructions (PDF)

     

  • Universal Shift Indicator Housing, Chrome
    Universal Shift Indicator Housing, Chrome
    x
                Universal shift indicator housings. Works with 3 speed or overdrive lens and pointer.
            
  • Ididit 1300320020 32 Inch Chrome Floor Shift Collapsable Tilt Steering Column
    New
    Ididit 1300320020 32 Inch Chrome Floor Shift Collapsable Tilt Steering Column
    x
                The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available a chrome plated finish.
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 1300300020 30 Inch Chrome Floor Shift Collapsable Tilt Steering Column
    New
    Ididit 1300300020 30 Inch Chrome Floor Shift Collapsable Tilt Steering Column
    x
                The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available in a chrome plated finish.
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Universal Power/Manual Master Cylinder, 1 Inch Bore, Corvette-Style, Chrome
    New
    Universal Power/Manual Master Cylinder, 1 Inch Bore, Corvette-Style, Chrome
    x
                

    These high-tech corvette-style master cylinders were designed using OE specifications and 100% tested.  They have a 1" bore and are suited for disc/drum combinations. Each master cylinder is ported on both the left and right sides, allowing for installation in many different applications. This exclusive design features a mating flange that works with applications requiring 3-1/8” through 3-3/8” bolt patterns.  These master cylinders will work with manual or power brake systems and can be quickly changed with the included adapter pin to plug the deep well.  The wide body and low profile gives this master cylinder the clearance you need when installing in tight areas and yet it maintains a large volume of fluid necessary for 2 and 4 wheel disc brake applications. 

    • Aluminum body
    • Chrome plated finish
    • 1" bore
    • 3/8-24 IFF ports on either side
    • Mount spacing is 3-3/8" on center
    • Works with power or manual brake systems
    • Compact, for installation under floor or on firewall
    • Suited for either disc/disc or disc/drum combinations 
    • Stroke of this master cylinder is approximately 1-1/16"

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech art

  • Carrera BKR 11-95 Front Coilover Shock Kit 225 Rate, 13.1 Inch Mounted
    Carrera BKR 11-95 Front Coilover Shock Kit 225 Rate, 13.1 Inch Mounted
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2