Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"triple carb manifold" Page 1 of 1

  • Offenhauser 5414 1963-75 Chevy 6-Cylinder Triple Carb Intake Manifold
    Offenhauser 5414 1963-75 Chevy 6-Cylinder Triple Carb Intake Manifold
    x
                

    Offenhauser Triple Carburetor Chevy 194, 230, 250 and 292 intakes allow you to run a Big 6 without the hassles and cost of the GMC. Manifold provides a nostalgic appearance while equalizing fuel distribution to all cylinders, improving both performance and economy. With this lightweight cast aluminum manifold, your inline six will be more responsive across the RPM range.

    Accepts three OEM (Rochester B or BC) 1-barrel carbs like the original on your 1963-1975 straight 6. Includes a "progressive" linkage kit and various tubing & fittings for plumbing fuel lines.

  • Rochester Carb Throttle Linkage Rod Kit, Triple Carb, Progressive
    Rochester Carb Throttle Linkage Rod Kit, Triple Carb, Progressive
    x
                

    This tri-powered factory replacement linkage set for Rochester carbs includes ball bearing joints and new carb throttle body shaft. This linkage kit is for carbs with a small base, 1-7/16 " butterflies. This throttle rod kit is designed to function as a progressive linkage with the center being the primary. It could be locked to work all 3 carbs at the same time if desired but would require correct internal carb components to avoid flooding out the engine during acceleration.  Does not work with after market manifolds.

    • Tri-powered factory replacement linkage set
    • Ball bearing joints
    • Progressive linkage with the center being the primary
    • For Rochester carbs with a small base, 1-7/16 " butterflies
    • Includes ball bearing joints and new carb throttle body shaft
    • Designed to replace the vacuum linkage on factory GM Tri Power setups such as '58-'61 Chevys and Pontiacs
    • Includes a new throttle shaft for the center (primary) carb
    • Linkage connects to the passenger side of the engine
    • Does not work with after market manifolds

    135-6681 Instructions (PDF) 

  • Offenhauser 1077 1949-1953 Ford Flathead Triple Carb Intake Manifold
    Offenhauser 1077 1949-1953 Ford Flathead Triple Carb Intake Manifold
    x
                This Offy 3x2 tri power manifold is designed for Stromberg 97 carbs ONLY. Manifold has 4-5/8" carb centers.  The front of the intake manifold has the  boss or flange for the generator or fan assembly to mount to. It also  has the fill and draft holes behind this flange.
    • For 1949-53 Ford Flatheads
    • 4-5/8" carb centers
    • Three Deuce carburetor style
    • Has boss or flange for generator or fan assembly to mount to
    • Has the fill and draft holes behind flange
    • Generator adapter bracket NOT included

    Manifold includes: 

    • 1.375" hole in the front of the intake for an oil-fill or breather tube
    • 1.25" hole in the front of the intake for the road draft tube

    Note: We recommend our Offenhauser 1949-1953 Flathead Intake Gasket for use with these intake manifolds.

  • Offenhauser 1072 1932-1941 Ford Flathead Triple Carb Intake Manifold
    Offenhauser 1072 1932-1941 Ford Flathead Triple Carb Intake Manifold
    x
                

    This Offy 3x2 tri power manifold is designed for Stromberg 97-style and Demon 98 carbs ONLY. ("94" style carbs will not fit.) 4-5/8" carb centers. The front of the intake manifold has the boss or flange for the generator or fan assembly to mount to. It also has the fill and draft holes behind this flange.  All include generator adapter brackets.

    • For 1932-41 Ford Flatheads
    • 4-5/8" carb centers
    • Three Deuce carburetor style
    • Has boss or flange for generator or fan assembly to mount to
    • Has the fill and draft holes behind flange
    • Includes generator adapter bracket

     

  • Offenhauser 1177 1937-52 Chevy 6-Cylinder Triple Carb Intake Manifold
    Offenhauser 1177 1937-52 Chevy 6-Cylinder Triple Carb Intake Manifold
    x
                

    Offenhauser Triple Carb intake manifolds provide a nostalgic appearance while equalizing fuel distribution to all cylinders, improving both performance and economy. With this lightweight cast aluminum manifold, your old "Stovebolt" will be more responsive across the RPM range. Use with two carburetors (2-5/8" bolt centers) typical of 1937-52 Chevys.

    • Fits 235 Chevy 6-cylinders
    • 1937-52 engines w/ Manual Transmission

     

    Included linkage kit is "non-progressive," meaning all three carbs operate at the same time.

  • Offenhauser 1409 1950-59 Chevy 6-Cylinder Triple Carb Intake Manifold
    Offenhauser 1409 1950-59 Chevy 6-Cylinder Triple Carb Intake Manifold
    x
                

    Offenhauser Triple Carb intake manifolds provide a nostalgic appearance while equalizing fuel distribution to all cylinders, improving both performance and economy. With this lightweight cast aluminum manifold, your old "Stovebolt" will be more responsive across the RPM range. Use with two "big base" carburetors (2-15/16" bolt centers) typical of 1954-1962 Chevys.

    • Fits 235-261 Chevy 6-cylinders
    • 1950-59 engines w/ PowerGlide
    • 1953-59 engines w/ Manual Transmission

     

    Included linkage kit is "non-progressive," meaning all three carbs operate at the same time.

  • Offenhauser 1074 1942-1948 Ford Flathead Triple Carb Intake Manifold
    Offenhauser 1074 1942-1948 Ford Flathead Triple Carb Intake Manifold
    x
                

    The Offenhauser tri power manifold is designed for Stromberg 97-style carbs ONLY. Has 4-5/8" carb centers. Features a mount flange at the front of the manifold for Offy fan carrier 560-3499 (sold separately).

    • For 1942-48 Ford Flatheads
    • Three Deuce carburetor style
    • 4-5/8" carb centers
    • Has boss or flange for generator or fan assembly to mount to

     

  • Three Chrome 9 Super 7   Carbs on Edelbrock 1108 Intake Kit, 1938-48 Ford V8
    Three Chrome 9 Super 7 Carbs on Edelbrock 1108 Intake Kit, 1938-48 Ford V8
    x
                Please view the product's page for more information
            
  • Edelbrock 1152 94 Two-Barrel Secondary Carburetor
    Edelbrock 1152 94 Two-Barrel Secondary Carburetor
    x
                Please view the product's page for more information
            
  • Edelbrock 1151 94 2-Barrel Carburetor
    Edelbrock 1151 94 2-Barrel Carburetor
    x
                Please view the product's page for more information
            
  • Edelbrock 1109 1949-53 Ford Flathead Triple Deuce Intake Manifold
    Edelbrock 1109 1949-53 Ford Flathead Triple Deuce Intake Manifold
    x
                

    This tri power manifold allows the use of square-bore carbs such as the Edelbrock Performer Series or Thunder Series AVS 500 cfm on the 1949-1953 Ford Flathead engine. This is a reproduction of the vintage Edelbrock #452 two-piece manifold with a new carb adapter flange.

    This reproduction of the vintage Edelbrock manifold #SU 349 allows the use of three 2-barrel carbs on a 1949-53 Ford flathead engines. Accepts Stromberg 3-bolt (97 type), Holley 3-bolt, Ford 94 style 3-bolt and Demon 98 carburetors. Carb spacing is 5-1/8". 

    • For 1949-53 Ford/Mercury Flathead
    • Three Deuce carburetor style
    • Front 1-3/8" diameter oil fill
    • 1-1/4" road draft bosses and a raised fuel pump boss
    • Carb spacing is 5-1/8"
    • Made in the USA
  • Edelbrock 1108 1938-48 Ford Flathead Triple Deuce Intake Manifold
    Edelbrock 1108 1938-48 Ford Flathead Triple Deuce Intake Manifold
    x
                

    This tri power reproduction of the vintage Edelbrock manifold #SU 359 allows the use of three 2-barrel carbs on 1938-1948 Ford flathead engines. Accepts Stromberg 3-bolt (97 type), Holley 3-bolt, Ford 94 style 3-bolt and Demon 98 carburetors. Carb spacing is 5-1/8". 

    • Three Deuce carburetor Manifold
    • For 1938-48 Ford/Mercury Flathead
    • Carb spacing is 5-1/8"
    • Made in the USA