Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ton ford brakes" Page 1 of 1

  • Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car and 1937-47 1/2 ton Ford spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Ford/Mopar wheel bolt pattern of 5 on 4-1/2".

    910-31945 Instructions (PDF)

  • Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    x
                

    This complete disc brake kit easily installs big 11-3/4" rotors on your 1937-1948 Ford car or 1937-1947 Ford 1/2 ton pickup spindles while retaining the original 5 on 5-1/2" bolt circle.

    This kit will work with spindles having either original steering arms or with flat steel steering arms. It will NOT work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications. Will NOT work with early Ford factory wire or steel drum brake wheels. You will need to use a later disc brake steel wheel or aftermarket wheel.

    910-31909 Instructions (PDF)

  • 1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups. No spindle modifications are required.

    Kit Includes:

    • Vented cast iron rotors
    • GM single piston calipers (7/16"-20 inlets)
    • Brake pads
    • Caliper slide bolts
    • Rubber brake lines
    • Steel caliper brackets
    • Hardware
    • New bearing and seal adapters
    • Seals
    • Inner bearing cones
    • Outer bearing cones
    • Spacers
    • Dust caps
  • Basic Disc Brake Kit, 1937-48 Ford Spindle to F-150 Rotors, 5 on 5-1/2 Inch
    Basic Disc Brake Kit, 1937-48 Ford Spindle to F-150 Rotors, 5 on 5-1/2 Inch
    x
                

    This basic front disc brake conversion kit easily installs big '73-'93 Ford F-150 2WD 11-3/4" rotors on your '37-'48 Ford car and '37-'47 Ford half-ton pickup truck spindles while retaining the original 5 on 5-1/2" wheel bolt circle. The calipers used with this kit are '71-'76 Chevy Impala single-pistion units.

    Kit includes:

    • Caliper brackets
    • Hardware
    • New bearing and seal adapters

    Note: This kit will work with spindles having either original steering arms or with flat steel steering arms. It will not work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications.

    Early Ford Brake Kit Installation Instructions (PDF)

  • Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 4-3/4 Inch
    Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 4-3/4 Inch
    x
                

    This kit installs '73-'77 GM mid-size car 11" rotors and '70-'77 Camaro or GM equivalent calipers on 1948-1956 Ford F-100 spindles.

  • Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 2 Inch
    Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 2 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    Wheel Cylinder Inlet: 7/16"-20 straight thread
    NOT 7/16"-20 IFF
    Inlet fitting will require a sealing washer or O-ring style fitting
    Bolt Pattern: 3-3/8" center-to-center both horizontal and vertically
    If using Model A or B spindles the holes will have to be elongated inward to fit the narrower bolt pattern

    We recommend use of adapter rings 916-31928 to keep the spindle centered in the backing plate 

  • Deluxe Disc Brake Kits: 1957-1964 Ford Half Ton
    Deluxe Disc Brake Kits: 1957-1964 Ford Half Ton
    x
                

    These kits allow you to put disc brakes on your 1957-64 Ford 1/2 ton pick-up.

    Kit Includes:

  • 11-3/4" brake rotor, 5 x 5-1/2"
  • Brake pads
  • GM Caliper slide bolts
  • Rubber Brake Lines
  • Rebuilt 1971-76 calipers (7/16"-20 inlets)
  • Brake brackets
  • Hardware
  • Seals
  • Inner bearing cups
  • Inner bearing cones
  • Spacers
  • Outer bearing cones
  • Dust caps
  • Instructions

    Instructions
  •  

     

  • Basic Disc Brake Kits: 1957-1964 Ford Half Ton
    Basic Disc Brake Kits: 1957-1964 Ford Half Ton
    x
                

    This kit allows you to put disc brakes on your 1957-1964 Ford 1/2 ton pick-ups. Uses 1979-1993 Ford F-100/F-150 or equivalent rotors and 1971-1987 GM ½ Ton truck or equivalent calipers (not included). Works with 5 on 5-1/2 inch bolt patterns.

    Kit includes:

  • Brake brackets
  • Hardware
  • 916-31985 Instructions (PDF)

  • Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet:  7/16"-24 IFF
      • To connect an AN 3 hose, use (2) of 910-318-7/16"
      • To connect a 3/16" steel line, use (2) of 910-3183-7/16"
    • Bolt Pattern:  3-3/8" center to center both horizontal and vertically
    • Use with park brake cables typical of '39-'48 Ford passenger cars
  • Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet:  7/16"-24 IFF
      • To connect an AN 3 hose, use (2) of 910-318-7/16"
      • To connect a 3/16" steel line, use (2) of 910-3183-7/16"
    • Bolt Pattern:  3-3/8" center to center both horizontal and vertically
    • Use with park brake cables typical of '39-'48 Ford passenger cars
  • 1935-40 Ford Master Cylinder with Pedal Bracket
    1935-40 Ford Master Cylinder with Pedal Bracket
    x
                

    Bolt a non-boosted master cylinder to your 1935-1940 Ford car and 1/2 ton pickup frame's original "X" member. The dual feed, 1" bore master cylinder works with 4-wheel disc brakes or disc/drum brake setups. Both fluid outlets are 3/8" -24 inverted flare female.  

    Kit includes master cylinder, pedal assembly and hardware.

    Brake System Builder's Tip (Link)

    NOTE: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an automatic transmission. 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 1-3/4 Inch
    Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 1-3/4 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet: 7/16"-20 straight thread
      • NOT 7/16"-20 IFF
      • Inlet fitting will require a sealing washer or O-ring style fitting
    • Bolt Pattern: 3-3/8" center-to-center both horizontal and vertically
      • If using Model A or B spindles the holes will have to be elongated inward to fit the narrower bolt pattern
      • We recommend use of adapter rings 916-31928 to keep the spindle centered in the backing plate

     

  • Garage Sale - Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    Garage Sale
    Garage Sale - Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    x
                Please view the product's page for more information
            
  • Garage Sale - 1948-56 Ford Half-Ton Disc Brake Brackets, 5 On 4-1/2 Inch
    Garage Sale
    Garage Sale - 1948-56 Ford Half-Ton Disc Brake Brackets, 5 On 4-1/2 Inch
    x
                

    This kit installs '76-'81 Dodge Aspen rotors or Chrysler equivalent and '70-'77 Camaro or GM equivalent calipers on 1948-1956 Ford F-100 spindles.

    916-31982 Instructions (PDF)

     

    These brackets are garage sale priced because they have been test fit and returned.  Brackets only. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

  • Garage Sale - Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    Garage Sale
    Garage Sale - Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    x
                

    This kit installs '73-'93 Ford F-150 11-3/4" rotors and '71-'76 Chevy Impala calipers on 1948-1956 Ford F-100 spindles.

    Instructions (PDF) 

     

    This is garage sale priced because the bearing and seal adapters that are either pressed on the spindle or heated and pushed on the spindle to increase the O.D. for the seal and also the inner bearing are missing.  

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Basic Disc Brake Kit, 1957-64 Ford Half Ton
    Garage Sale
    Garage Sale - Basic Disc Brake Kit, 1957-64 Ford Half Ton
    x
                

    This kit allows you to put disc brakes on your 1957-1964 Ford 1/2 ton pick-ups. Uses 1979-1993 Ford F-100/F-150 or equivalent rotors and 1971-1987 GM ½ Ton truck or equivalent calipers (not included). Works with 5 on 5-1/2 inch bolt patterns.

    Kit includes:

  • Brake brackets
  • Hardware
  • 916-31985 Instructions (PDF)

    This bracket kit is garage sale priced because it has been test fit and returned.  This kit is missing the 4 spacers, what you see is what you get. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    Garage Sale
    Garage Sale - Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

     

    These are garage sale priced because they are missing the bottom springs.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - 1948-56 Ford Pick-Up Basic Disc Brakc Bracket Kit, 5 on 4-1/2
    Garage Sale
    Garage Sale - 1948-56 Ford Pick-Up Basic Disc Brakc Bracket Kit, 5 on 4-1/2
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups.

    Kit Includes:

    • Brake brackets
    • Hardware

    916-31982 Instructions (PDF)

     

    This brake kit is garage sale priced because it has been bolted on and returned.  This one is also missing bearing adapters.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - Disc Brake Brackets 1948-56 Ford Half Ton
    Garage Sale
    Garage Sale - Disc Brake Brackets 1948-56 Ford Half Ton
    x
                

    Brackets only.

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 x 5-1/2"
    Garage Sale
    Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 x 5-1/2"
    x
                

     

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups.

    Kit Includes:

    • Brake brackets
    • Hardware

    Instructions (PDF)

     

    This item is garage sale priced because it is missing the bearing adapters.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

  • Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 X 5-1/2
    Garage Sale
    Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 X 5-1/2
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups.

    Kit Includes:

    • Brake brackets
    • Hardware

    This brake kit is garage sale priced because it is missing the 6 spacers.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 X 5-1/2
    Garage Sale
    Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 X 5-1/2
    x
                

     

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups.

    Kit Includes:

    • Brake brackets
    • Hardware

    Instructions (PDF)

     

    This item is garage sale priced because it is missing the bearing adapters.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

  • Garage Sale - 1948-56 Pick-Up Basic Brake Kit
    Garage Sale
    Garage Sale - 1948-56 Pick-Up Basic Brake Kit
    x
                

     

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups.

    Kit Includes:

    • Brake brackets
    • Hardware

    Instructions (PDF)

     

    This item is garage sale priced because it is missing the bearing adapters.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS