Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"thick valve cover gaskets" Page 1 of 1

  • Speedway Small Block Chevy Valve Cover Gaskets, Extra Thick
    Speedway Small Block Chevy Valve Cover Gaskets, Extra Thick
    x
                

    Our durable small block Chevy cork valve cover gaskets will work on any street or race engine. Features a 5/16" extra thick cork/neoprene blend.

  • Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    x
                

    Cork valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC).

  • Small Block Chevy Valve Cover Gaskets, 3/16 Inch Thick Six Hole
    Small Block Chevy Valve Cover Gaskets, 3/16 Inch Thick Six Hole
    x
                

    Composite valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC).

  • Chevy LS1/LS6 Finned Valve Covers, Polished
    Chevy LS1/LS6 Finned Valve Covers, Polished
    x
                

    If you are running a '97-Up LS1 style engine in your classic street rod, these valve covers are for you. These finned covers have a cast-in breather/PCV hole in each cover. They only use the 2 end bolts for mounting (stock uses four) for a cleaner look. The sand cast aluminum construction provides stiffness so four bolts are not needed to apply pressure evenly to the gasket. Comes with gaskets and hardware.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Cast-in internal baffles
    • Clears Jesel roller rockers
    • Mounting hardware included

    Note: There are no provisions for the original coil packs. Use our relocation harness to move coil packs to the fenders or firewall. 

    Finned Valve Cover Specs (PDF) 

  • Chevy LS1/LS6 Finned Valve Covers, Plain
    Chevy LS1/LS6 Finned Valve Covers, Plain
    x
                

    If you are running a '97-Up LS1 style engine in your classic street rod, these valve covers are for you. These finned covers have a cast-in breather/PCV hole in each cover. They only use the 2 end bolts for mounting (stock uses four) for a cleaner look. The sand cast aluminum construction provides stiffness so four bolts are not needed to apply pressure evenly to the gasket. Comes with gaskets and hardware.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Cast-in internal baffles
    • Clears Jesel roller rockers
    • Mounting hardware included

    Note: There are no provisions for the original coil packs. Use our relocation harness to move coil packs to the fenders or firewall. 

    Finned Valve Cover Specs (PDF) 

  • Small Block Chevy Valve Cover Gaskets, 5/16 Inch Thick Steel Core
    Small Block Chevy Valve Cover Gaskets, 5/16 Inch Thick Steel Core
    x
                

    Cork valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC).

  • Chevy 348/409 Finned Aluminum Valve Covers, Plain
    Chevy 348/409 Finned Aluminum Valve Covers, Plain
    x
                

    W-Series 348 and 409 Chevys just cry out for a set of finned aluminum valve covers. Their unique shape and classic appeal will be the focal point of your hot rod. These valve covers feature raised CHEVROLET script and fins, strong sand-cast aluminum construction, thick walls and gasket flanges that will not bend when bolts are tightened.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Mounting hardware included
    • Uses stock gaskets (not included)
       
  • Chevy 348/409 Finned Aluminum Valve Covers, Polishd
    Chevy 348/409 Finned Aluminum Valve Covers, Polishd
    x
                

    W-Series 348 and 409 Chevys just cry out for a set of finned aluminum valve covers. Their unique shape and classic appeal will be the focal point of your hot rod. These valve covers feature raised CHEVROLET script and fins, strong sand-cast aluminum construction, thick walls and gasket flanges that will not bend when bolts are tightened.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Polished finish
    • Mounting hardware included
    • Uses stock gaskets (not included)
       
  • SuperSeal 1976-85 Chevy 305 Complete Gasket Set
    SuperSeal 1976-85 Chevy 305 Complete Gasket Set
    x
                

    SuperSeal Chevy gaskets are for 2-piece rear main blocks. Oil pan gasket can be used with either RH or LH dipsticks and includes both thin and thick seals. Valve cover gaskets are 5/16" rubberized cork suitable for racing.

    • Suitable for engines up to 600 h.p. 
    • Intake Gasket: 1205 style, 1.28" x 2.09"
    Gasket Set Includes:
    • Valve Cover
    • Timing Cover
    • Head Gasket
    • Intake Gasket
    • Oil Pan Gaskets
    • Front Seal
    • Rear Seal
    • Water Pump
    • Distributor
    • Fuel Pump
    • Fuel Pump Block 
  • SuperSeal 1957-85 Chevy 283-350 Complete Gasket Set
    SuperSeal 1957-85 Chevy 283-350 Complete Gasket Set
    x
                

    SuperSeal Chevy gaskets are for 2-piece rear main blocks. Oil pan gasket can be used with either RH or LH dipsticks and includes both thin and thick seals. Valve cover gaskets are 5/16" rubberized cork suitable for racing.

    • Suitable for engines up to 600 h.p. 
    • Intake Gasket: 1205 style, 1.28" x 2.09"
  • Billet Valve Cover O-Ring Oil Fill
    Billet Valve Cover O-Ring Oil Fill
    x
                This is a handy little item. Basically, it's a bolt-in breather opening for a valve cover that can be used to install a breather cap, an oil fill cap, or a breather with a PCV valve. 

    To install this item, you must make a 1-7/16" hole in the valve cover. You may want to purchase 91011033, our billet breather and/or 91011034, our billet PCV valve.
  • Big Block Chevy Fabricated Valve Covers
    Big Block Chevy Fabricated Valve Covers
    x
                

    Whether you're going for the hardcore race look or just trying to save weight, these fabricated aluminum valve covers are for you! These fully welded sheet aluminum covers feature a 1/4" thick flange for a great seal. Can be painted, polished, or left in bare aluminum finish. Bolts and washers included for mounting with valve cover. Gaskets not included.

    • Fits 1965-1995 B/B Chevy 396-502 c.i. V8
    • Depth:  3.75"
    • Overall Height:  3.80"

    No provisions for an oil breather. These valve covers do not contain baffles. 

     

  • Small Block Ford Fabricated Aluminum Valve Covers
    Small Block Ford Fabricated Aluminum Valve Covers
    x
                Whether you're going for the hardcore race look or  just trying to save weight, these fabricated aluminum valve covers are  for you! These fully welded sheet aluminum covers feature a 1/8" thick  flange for a great seal. Can be painted, polished, or left in bare  aluminum finish. Bolts and washers included for mounting with valve  cover.

    Fits 1962-1985 Small Block Ford 260-289-302-351W & 5.0L

  • 1960-1986 Small Block Chevy Fabricated Valve Covers
    1960-1986 Small Block Chevy Fabricated Valve Covers
    x
                

    Whether you're going for the hardcore race look or just trying to save weight, these fabricated aluminum valve covers are for you! These fully welded sheet aluminum covers feature a 1/8" thick flange for a great seal. Can be painted, polished, or left in bare aluminum finish. Bolts and washers included for mounting with valve cover. Gaskets not included.

    Fits 1960-1986 Small Block Chevy 283-400 c.i. V8.

    No provisions for an oil breather. 

  • SuperSeal 1970-81 Chevy 400 Complete Gasket Set
    SuperSeal 1970-81 Chevy 400 Complete Gasket Set
    x
                

    SuperSeal Chevy gaskets are for 2-piece rear main blocks. Oil pan gasket can be used with either RH or LH dipsticks and includes both thin and thick seals. Valve cover gaskets are 5/16" rubberized cork suitable for racing.

    • Suitable for engines up to 600 h.p. 
    • Intake Gasket: 1205 style, 1.28" x 2.09"
    • Head gaskets can be used with up to 4.165" bore
  • Garage Sale - Chevy LS1/LS6 Finned Valve Covers, Polished
    Garage Sale
    Garage Sale - Chevy LS1/LS6 Finned Valve Covers, Polished
    x
                Please view the product's page for more information