Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"sway bar arms" Page 1 of 2

  • Energy Suspension 9.5108G Urethane Sway Bar Mount Bushings, 7/8 Inch
    Energy Suspension 9.5108G Urethane Sway Bar Mount Bushings, 7/8 Inch
    x
                

    Mounts available for different size sway bars.

  • King Racing Products 1165 Sway Bar Arm Stop
    King Racing Products 1165 Sway Bar Arm Stop
    x
                Universal kit works with any car. Machined from 2024 billet aluminum, fully radiused, and anodized black. Includes Grade 8 hardware with multiple linkage placements.
            
  • 1978-88 GM G-Body Rear Control Arms
    1978-88 GM G-Body Rear Control Arms
    x
                

    These heavy duty rear control arms are much stronger than stock stamped arms and help control wheel hop. Can be used with Speedway polyurethane bushings or stock-style bushings such as Moog K-6178.

    Note: The lower control arms in these kits do not have provisions for mounting a factory sway bar.

  • GM 1978-88 G-Body Lower Rear Control Arm
    GM 1978-88 G-Body Lower Rear Control Arm
    x
                

    These heavy duty rear control arms are much stronger than stock stamped arms and help control wheel hop. Can be used with Speedway polyurethane bushings or stock-style bushings such as Moog K-6178.

    • Much stronger than stock stamped arms
    • 19-1/2" center to center
    • Does not include bushings
    • Use 91634045 polyurethane bushings
    • No provision for factory style sway bar on lower arms
    • Lower Arms: 19-1/2"
    • Sold each

    Note: Measurements are center to center of the bushings.

    Bushing installation note:  The bushing eyelets have a stepped inside diameter.  This requires the bushings to be installed into one specific side of the arm which has the larger inside diameter as compared to it's opposite side.  The bushing will not properly fit if it is started into the smaller, incorrect side of the bushing eye ring. 

  • GM 1973-77 A-Body Lower Rear Control Arm
    GM 1973-77 A-Body Lower Rear Control Arm
    x
                
    These heavy duty rear control arms are much stronger than stock stamped arms and help control wheel hop. Can be used with Speedway polyurethane bushings or stock-style bushings such as Moog K-6178.
    • Much stronger than stock stamped arms
    • 22-3/8" center to center
    • Does not include bushings
    • Use 91634045 polyurethane bushings
    • No provision for factory style sway bar on lower arms
    • Lower Arms: 22-3/8"
    • Sold each

    Note: Measurements are center to center of the bushings.

    Bushing installation note:  The bushing eyelets have a stepped inside diameter.  This requires the bushings to be installed into one specific side of the arm which has the larger inside diameter as compared to it's opposite side.  The bushing will not properly fit if it is started into the smaller, incorrect side of the bushing eye ring. 

  • Universal Rear Sway Bar Kit
    $359.99
    Universal Rear Sway Bar Kit
    x
                

    Universal rear sway bar fits frame up to 45" wide, which makes it ideal for many 1928-1948 street rod applications. Both the 1-1/4" diameter shaft and the 2" O.D. weld-in frame tube can be shortened for narrower frames. The billet aluminum arms are not splined - they are held on by drilling the shaft and inserting a bolt all the way through the end of the shaft.

    Includes bushings, 3/8" adjustable rod ends and all hardware. Welding required.

  • King Racing Products 1175 Sway Bar Splined Right Front Arm
    King Racing Products 1175 Sway Bar Splined Right Front Arm
    x
                Universal kit works with any car. Machined from 2024 billet aluminum, fully radiused, and anodized black. Includes Grade 8 hardware with multiple linkage placements.
            
  • King Racing Products 1185 Sway Bar Splined Left Front Arm
    King Racing Products 1185 Sway Bar Splined Left Front Arm
    x
                Universal kit works with any car. Machined from 2024 billet aluminum, fully radiused, and anodized black. Includes Grade 8 hardware with multiple linkage placements.
            
  • Prothane 19-1134-BL Urethane Sway Bar Mount Bushings, 1 Inch
    Prothane 19-1134-BL Urethane Sway Bar Mount Bushings, 1 Inch
    x
                

    Mounts available for different size sway bars.

  • Prothane 19-1136-BL Urethane Sway Bar Mount Bushings, 1-1/8 Inch
    Prothane 19-1136-BL Urethane Sway Bar Mount Bushings, 1-1/8 Inch
    x
                

    Mounts available for different size sway bars.

  • Front Panhard Bars
    From: $79.99
    Product Rating: 5.00 Stars
    Front Panhard Bars
    x
                

    With cross steering a Panhard bar is a must-have. It stops side-to-side sway of chassis relative to the axle. This bar is for spring-over-axle, 4-bar front ends on 1928-1934 Fords.  Tube O.D. is 5/8".

    • 11/16" outside diameter
    • 1/2" inside diameter
    • 1/2" bolt
    • 1/2" heim

    Chassis bracket welds-on, then bar bolts in place to the side of the 4-bar batwing. Panhard bar bracket mounts to a batwing that features a 4-1/2" on center four-bar spacing.

  • 1978-88 GM G-Body Rear Control Arms with Bushings
    1978-88 GM G-Body Rear Control Arms with Bushings
    x
                

    These heavy duty rear control arms are much stronger than stock stamped arms and help control wheel hop. Arms shipped without bushings installed.

    Note: The lower control arms in these kits do not have provisions for mounting a factory sway bar.

  • 1973-77 GM A-Body Rear Control Arms with Bushings
    1973-77 GM A-Body Rear Control Arms with Bushings
    x
                

    These heavy duty rear control arms are much stronger than stock stamped arms and help control wheel hop. Arms shipped without bushings installed.

    These rear control arms do NOT have provisions for the stock sway bar.

  • Speedway Stainless Steel Batwing Brackets
    Speedway Stainless Steel Batwing Brackets
    x
                

    Investment cast stainless steel. For axles with 2-1/4" boss (spacer required for 2" axle boss). Four-bar mount center-to-center is 4-1/2".

    Has 1/2-20" threaded hole for panhard bar or sway bar mounting. 

  • 1973-77 GM A-Body Rear Control Arms
    1973-77 GM A-Body Rear Control Arms
    x
                

    These heavy duty rear control arms are much stronger than stock stamped arms and help control wheel hop. Can be used with Speedway polyurethane bushings or stock-style bushings such as Moog K-6178.

    These rear control arms do NOT have provisions for the stock sway bar.

  • AFCO 20023R-2 Round Tube Lower Arm Rubber Bushing Press-In 16-5/8 Inch
    AFCO 20023R-2 Round Tube Lower Arm Rubber Bushing Press-In 16-5/8 Inch
    x
                

    AFCO control arms are designed and constructed without compromise to provide consistent, predictable operation.  With AFCO control arms installed changes in spring rate, shock valve settings, tire pressure, etc., will be more predictable and measureable.

    • Made from .095" wall DOM tubing
    • Rubber bushing included
    • Uses standard 20051 strut bars 
    • Use Moog K727 style ball joints for screw-in and K6141 style of press-in
    Use K6141 style press-in ball joints.Rubber Bushings.
  • Polyurethane Bushing Kit 1978-88 Monte Carlo, Malibu
    Polyurethane Bushing Kit 1978-88 Monte Carlo, Malibu
    x
                

    Energy Suspension Master Bushing Sets are the high-tech solution to performance handling and control that O.E.M. manufacturers just don't offer! Energy's complete Master Set both restores worn mounts and bushings as well as adds a dramatically higher degree of performance handling to any vehicle. Energy's special HYPER-FLEX polyurethane formula is of a higher durometer (firmness) than rubber materials, which assures long-lasting performance as well as a firm chassis feel. These master bushing sets offer coverage front to back of the vehicle's chassis.

    • A real must for competition use, or just for that "seat-of-the-pants" feel
    • Increases vehicle stability and control as well as durability
    • Reduces wheel hop and traction loss
    • Proven by both professional and amateur racers alike
    • Both restores and improves suspension to better than new performance
    • Made of Energy's HYPER-FLEX performance polyurethane
    • Heavy duty metal sleeves and components are used for increased strength
    • Kit Includes:

      • Front & Rear Control Arm Bushings
      • Front End Link Set
      • Rear Coil Spring Isolators
      • Transmission Mount 
      • Ball Joint and Tie Rod End Set

    NOTE: Sets do not contain sway bar components because of the various sizes offered by the vehicle manufacturer.

  • Polyurethane Bushing Kit 1968-72 Chevelle
    Polyurethane Bushing Kit 1968-72 Chevelle
    x
                

    Energy Suspension Master Bushing Sets are the high-tech solution to performance handling and control that O.E.M. manufacturers just don't offer! Energy's complete Master Set both restores worn mounts and bushings as well as adds a dramatically higher degree of performance handling to any vehicle.

    Energy's special HYPER-FLEX polyurethane formula is of a higher durometer (firmness) than rubber materials, which assures long-lasting performance as well as a firm chassis feel.

    These Master Bushing Sets offer coverage front to back of the vehicle's chassis.

    • A real must for competition use, or just for that "seat-of-the-pants" feel
    • Increases vehicle stability and control as well as durability
    • Reduces wheel hop and traction loss
    • Proven by both professional and amateur racers alike
    • Both restores and improves suspension to better than new performance
    • Made of Energy's HYPER-FLEX performance polyurethane
    • Heavy duty metal sleeves and components are used for increased strength
    • Kit Includes:

      • Front & Rear Control Arm Bushings
      • Front End Link Set
      • Body Mount Set
      • Rear Coil Spring Isolators
      • Transmission Mount
      • Ball Joint & Tie Rod End Boots

    *Sets do not contain sway bar components, because of the various sizes offered by the vehicle manufacturer.

     

  • Polyurethane Bushing Kit 1966-72 GTO, Skylark, Cutlass
    Polyurethane Bushing Kit 1966-72 GTO, Skylark, Cutlass
    x
                

    Energy Suspension Master Bushing Sets are the high-tech solution to performance handling and control that O.E.M. manufacturers just don't offer! Energy's complete Master Set both restores worn mounts and bushings as well as adds a dramatically higher degree of performance handling to any vehicle.

    Energy's special HYPER-FLEX polyurethane formula is of a higher durometer (firmness) than rubber materials, which assures long-lasting performance as well as a firm chassis feel.

    These Master Bushing Sets offer coverage front to back of the vehicle's chassis.

    • A real must for competition use, or just for that "seat-of-the-pants" feel
    • Increases vehicle stability and control as well as durability
    • Reduces wheel hop and traction loss
    • Proven by both professional and amateur racers alike
    • Both restores and improves suspension to better than new performance
    • Made of Energy's HYPER-FLEX performance polyurethane
    • Heavy duty metal sleeves and components are used for increased strength
    • Kit Includes:

      • Front & Rear Control Arm Bushings
      • Front End Link Set
      • Rear Coil Spring Isolators
      • Transmission Mount
      • Ball Joint & Tie Rod End Boots

    *Sets do not contain sway bar components, because of the various sizes offered by the vehicle manufacturer.

     

  • Polyurethane Bushing Kit 1967-69 Camaro Mono-Leaf Rear
    Polyurethane Bushing Kit 1967-69 Camaro Mono-Leaf Rear
    x
                Please view the product's page for more information
            
  • Folded Tri-Bar Upper Bracket
    $14.99
    Folded Tri-Bar Upper Bracket
    x
                
    • Upper Triangulated four bar mount
    • For 3/4" Four Bar Rod Ends
    • 7 gauge steel
    • Sold each
  • Polyurethane Bushing Kit 1955-57 Chevy
    Polyurethane Bushing Kit 1955-57 Chevy
    x
                

    Energy Suspension Master Bushing Sets are the high-tech solution to performance handling and control that O.E.M. manufacturers just don't offer! Energy's complete Master Set both restores worn mounts and bushings as well as adds a dramatically higher degree of performance handling to any vehicle.

    Energy's special HYPER-FLEX polyurethane formula is of a higher durometer (firmness) than rubber materials, which assures long-lasting performance as well as a firm chassis feel.  These Master Bushing Sets offer coverage front to back of the vehicle's chassis.

    • A real must for competition use, or just for that "seat-of-the-pants" feel
    • Increases vehicle stability and control as well as durability
    • Reduces wheel hop and traction loss
    • Proven by both professional and amateur racers alike
    • Both restores and improves suspension to better than new performance
    • Made of Energy's HYPER-FLEX performance polyurethane
    • Heavy duty metal sleeves and components are used for increased strength

    *Sets do not contain sway bar components, because of the various sizes offered by the vehicle manufacturer.

  • AFCO 20028R-2 Round Tube Lower Arm, Rubber Bushing, Press-In, 18 Inch
    AFCO 20028R-2 Round Tube Lower Arm, Rubber Bushing, Press-In, 18 Inch
    x
                
    • Made from .095" wall DOM tubing
    • Rubber bushing included
    • Uses standard 20051 strut bars 
    • Use Moog K727 style ball joints for screw-in and K6141 style of press-in
  • AFCO 20029R-2 Round Tube Lower Arm, Rubber Bushing, Press-In, 19 Inch
    AFCO 20029R-2 Round Tube Lower Arm, Rubber Bushing, Press-In, 19 Inch
    x
                
    • Made from .095" wall DOM tubing
    • Rubber bushing included
    • Uses standard 20051 strut bars 
    • Use Moog K727 style ball joints for screw-in and K6141 style of press-in
  • AFCO 20025R-2 Round Tube Lower Arm Rubber Bushing Press-In 17-5/8 Inch
    AFCO 20025R-2 Round Tube Lower Arm Rubber Bushing Press-In 17-5/8 Inch
    x
                
    • Made from .095" wall DOM tubing
    • Rubber bushing included
    • Uses standard 20051 strut bars
    • Use Moog K727 style ball joints for screw-in and K6141 style of press-in
  • Polyurethane Bushing Kit 1974-77 Chevelle A-Body
    Polyurethane Bushing Kit 1974-77 Chevelle A-Body
    x
                

    Energy Suspension Master Bushing Sets are the high-tech solution to performance handling and control that O.E.M. manufacturers just don't offer! Energy's complete Master Set both restores worn mounts and bushings as well as adds a dramatically higher degree of performance handling to any vehicle.

    Energy's special HYPER-FLEX polyurethane formula is of a higher durometer (firmness) than rubber materials, which assures long-lasting performance as well as a firm chassis feel.

    These Master Bushing Sets offer coverage front to back of the vehicle's chassis.

    • A real must for competition use, or just for that "seat-of-the-pants" feel
    • Increases vehicle stability and control as well as durability
    • Reduces wheel hop and traction loss
    • Proven by both professional and amateur racers alike
    • Both restores and improves suspension to better than new performance
    • Made of Energy's HYPER-FLEX performance polyurethane
    • Heavy duty metal sleeves and components are used for increased strength

    *Sets do not contain sway bar components, because of the various sizes offered by the vehicle manufacturer.

     

  • Polyurethane Bushing Kit 1967-69 Camaro Multi-Leaf Rear
    Polyurethane Bushing Kit 1967-69 Camaro Multi-Leaf Rear
    x
                

    Energy Suspension Master Bushing Sets are the high-tech solution to performance handling and control that O.E.M. manufacturers just don't offer! Energy's complete Master Set both restores worn mounts and bushings as well as adds a dramatically higher degree of performance handling to any vehicle.

    • A real must for competition use, or just for that "seat-of-the-pants" feel
    • Increases vehicle stability and control as well as durability
    • Reduces wheel hop and traction loss
    • Proven by both professional and amateur racers alike
    • Both restores and improves suspension to better than new performance
    • Made of Energy's HYPER-FLEX performance polyurethane
    • Heavy duty metal sleeves and components are used for increased strength

    Energy's special HYPER-FLEX polyurethane formula is of a higher durometer (firmness) than rubber materials, which assures long-lasting performance as well as a firm chassis feel.

    These Master Bushing Sets offer coverage front to back of the vehicle's chassis.

    *Sets do not contain sway bar components, because of the various sizes offered by the vehicle manufacturer.

     

  • AFCO 20029R-1 5/8 Inch Rod End Round Tube Lower Arm, 19 Inch, Press-In
    AFCO 20029R-1 5/8 Inch Rod End Round Tube Lower Arm, 19 Inch, Press-In
    x
                
    • .109" Wall DOM Tubing
    • Swaged for 5/8" rod end
    • Press-In Ball Joint
    • Uses standard 20051 strut bars
    • Std GRT/Rayburn/Shaw
  • AFCO 20018R-1 5/8 In Rod End Round Tube Lower Arm 18 Inch LH, Screw-In
    AFCO 20018R-1 5/8 In Rod End Round Tube Lower Arm 18 Inch LH, Screw-In
    x
                
    • .109" Wall DOM Tubing
    • Swaged for 5/8" rod end
    • Uses standard 20051 strut bars
  • AFCO 20028R-1 5/8 In. Rod End Round Tube Lower Arm 18 Inch LH Press-In
    AFCO 20028R-1 5/8 In. Rod End Round Tube Lower Arm 18 Inch LH Press-In
    x
                
    • .109" Wall DOM Tubing
    • Swaged for 5/8" rod end
    • Uses standard 20051 strut bars
  • Swindell Series by Ti64 Ti Sprint Car Front Axle Bolt Kit
    Swindell Series by Ti64 Ti Sprint Car Front Axle Bolt Kit
    x
                

    This custom kit was put together for the Swindell Series front end kits (940-358/940-368). This is included in those axle kits, or buy it as a replacement set. 

    Kit includes:

    • (2)  3/8" AN Washer
    • (2) 3/8"-24 x 1" Hex Head Bolt, LF Caliper to Bracket
    • (3) 1/2"-20 x 1" Countersunk Screw, LF Rotor
    • (2) 1/2"-20 x 2" Hex Head Bolt, LF Steering Arm to Spindle
    • (2) 1/2"-20 x 1.5" Hex Head Bolt, RF Steering Arm
    • (1) 1/2"-20 x 2.75" Hex Head Bolt, Sway Bar to Frame
    • (4) 1/2"-20 x 4" Hex Head Bolt, Tie Rod/Drag Link
    • (3) 1/2"-20 x 1.5" Hex Head Bolt, Axle to Radius Rods
    • (4) 1/2" AN Washer
    • (9) 1/2"-20 Nylock 1/2" Height Locknuts
  • Garage Sale - Pro Comp 1964-72 Chevelle Tubular Control Arms
    Garage Sale
    Garage Sale - Pro Comp 1964-72 Chevelle Tubular Control Arms
    x
                

    If you've wanted a set of tubular control arms for your '64-'72 Chevelle but could not afford them, we've got you covered. Procomp specifically designed these A-arms to plant the tires to the ground during hard cornering, allowing the suspension to keep proper geometry. Comes complete with bushings, ball joints, bump stops, and are powder coated black. 

    Fits Chevrolet Chevelle, El Camino, Malibu, and Monte Carlo.

     

    These control arms are garage sale priced because they are missing the sway bar link.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Straight Sway Bar Arm
    $49.99
    $69.99
    Garage Sale
    Garage Sale - Straight Sway Bar Arm
    x
                

    Machined aluminum torsion arm. Measures 19.5"

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Sway Bar Brackets
    $6.99
    $9.99
    Garage Sale
    Garage Sale - Sway Bar Brackets
    x
                

    Mild steel 1/4" thick sway bar bracket. For 1/2" bolts. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Plain Sway Bar Mounts
    $15.99
    $25.99
    Garage Sale
    Garage Sale - Plain Sway Bar Mounts
    x
                

    Plain steel sway bar mounts have a 5/8" hole, 3/4" slot. The mounting pad measures 3-1/2" x 2" and has 3/8" holes. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Chrome Panhard Sway Bar
    $29.99
    $39.99
    Garage Sale
    Garage Sale - Chrome Panhard Sway Bar
    x
                

    25 inch chrome plated steel panhard rod. Made for 1/2" heim joints. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

Goto Previous PagePrevious Page
1 2