Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"style valve covers" Page 1 of 4

  • Valve Cover Breather Filter - 1 3/8 Inches
    Valve Cover Breather Filter - 1 3/8 Inches
    x
                

    Valve Cover Breather Filter, 1 3/8"

    Clamp-on style valve cover breathers. Washable.

  • SuperSeal Small Block Chevy Valve Cover Gaskets, Pre 1986
    SuperSeal Small Block Chevy Valve Cover Gaskets, Pre 1986
    x
                

    Small Block Chevy (SBC) valve cover gaskets made with a stainless steel frame sandwiched between durometer-tested neoprene rubber. Eliminates leakage caused by internal pressure fluctuations. Won't tear or collapse.

    Reusuable. Package of two. 

    SuperSeal Illustration (GIF)

     

  • Valve Cover Adapter for Center Bolt Heads
    Valve Cover Adapter for Center Bolt Heads
    x
                

    As you know, you can't run a stud girdle when using centerbolt valve covers. These handy adaptors simply bolt to your centerbolt heads which allows you to use standard valve covers and stud girdles. O-ring seal on head side. Use standard gasket on valve cover side. Has bolt holes to use with early '60-'86 "straight bolt" valve covers as well as '55-'59 staggered bolt valve covers.

    We also carry adaptor plates (# 910-17145) to put '87 and newer center-bolt valve covers on '60-'86 heads.
     

  • Oldsmobile Valve Covers for Small Block Chevy
    Oldsmobile Valve Covers for Small Block Chevy
    x
                These neat valve covers are designed to look like the early Oldsmobile valve covers but fit late style small block Chevys using center bolt valve cover cylinder heads.  They can also be used with conventional small block cylinder heads by using the valve cover adapter kit listed below.  Order one set of valve covers and one set of looms.

    910-8202: These valve covers have one, 1.22" hole in each cover to accept a PCV valve grommet, or a filler plug. They measure 2.5" from their own gasket surface to the underside of the 'top' of the valve cover. The customer will add the thickness of their valve cover gasket and/or the adapter for early heads, to determine rocker arm clearances. The plain finish valve covers and indeed plain, die-cast aluminum. Not painted.
  • Twist-On Chrome Oil Filler Tubes
    Twist-On Chrome Oil Filler Tubes
    x
                

    Trick looking chrome oil filler extension tubes. Attach to any valve cover filler holes. Twist-on style.

    Extends up to 4-1/2" from the valve cover. There is no baffle inside the tube. Outside diameter is 1-3/4". Inside diameter is 1-1/4".

    Top is notched to accept a twist on cap or breather. There is no breather cap included. Reuse your existing breather or cap. A push-in breather can also be used with a grommet. There will be a gap at the end where the tabs for the push in style caps' wing tabs would go.

  • Chrome Valve Cover Wing Nut
    $1.99
    Product Rating: 4.50 Stars
    Chrome Valve Cover Wing Nut
    x
                

    Premium chrome plating and classic styling make this hold down the first choice of rodders everywhere! Wing nut threads are extra-long to accommodate nearly any combination of valve cover, clamps and gasket thickness. Just cut off to length you need. Soldindividually.

    Wing nut has 1/4" coarse threads.

  • Offenhauser 2731 1937-62 Chevy Six Cylinder Valve Cover
    Offenhauser 2731 1937-62 Chevy Six Cylinder Valve Cover
    x
                

    We have these hard-to-find covers for your 1937-1962 Chevrolet 216, 235 and 261 engines. These Chevy 6 cylinder finned aluminum Offenhauser valve covers will shine up your old Stovebolt. 

    NOTE: To use on 1954-1962 inline six head, you will need to supply a 1937-1953 style gasket, a pair of washers and stud seals typical of '37-'53, and a pair of acorn nuts to fit the long studs that come with the cover. This cover is a direct replacement for the 1937-1953 Chevy.

  • Oldsmobile Valve Cover Wire Looms for Small Block Chevy
    Oldsmobile Valve Cover Wire Looms for Small Block Chevy
    x
                

    These die-cast wire looms evenly space four spark plug wires on our 'Olds-style' valve covers (room for 8mm wires, larger if you modify them). These looms completely cover the oil fill/pcv valve grommet holes. You will need to modify the loom (by perhaps boring a large hole) to access the valve cover's 1.22"' hole.

    Acorn nuts are provided to make quick removal of the looms simple and easy (12-1/2" mount centers). The "Rocket" decals are a dark red color. Order one set of looms for one set of valve covers.

    Not for use on stock Oldsmobile valve covers. Designed for use with S/B Chevy valve covers 910-8202.

  • Holley 242-1 B/B Chevy Replica LS Coil Covers
    Holley 242-1 B/B Chevy Replica LS Coil Covers
    x
                

    Do you own a vehicle with an LS based engine, but love the looks of a big–block Chevy? These coil covers from Holley are equally at home on a 2010 Camaro or a LS swap muscle car, truck or any ride needing to cover the factory LS coils. They're ready to paint so use your imagination! The covers are easily installed by using basic hand tools. Just replace a few coil bracket mount bolts with the included ball studs and snap the covers in place.

    • Cover those unsightly coil packs on your GM LS engine
    • Ultra lightweight glass-filled nylon composite construction
    • Paint to match your color scheme
    • Trim to fit your application
    • OEM-style snap-on mounting
    • Oil fill adaptor and cap included
    • Fits LS2, LS3 & LS7 engines as well as other LS family engines using LS3 style coils & valve covers

    Note: Coil cover may require minor trimming on typical hot rod or swap application. Use on OE applications may require more extensive trimming to clear factory componentry (A/C box, brake booster, front drive accessories etc.).

    425-2421 Instructions (PDF)

  • 1963-Up Chevy 6-Cylinder Chrome Valve Cover
    1963-Up Chevy 6-Cylinder Chrome Valve Cover
    x
                Brilliant chrome steel valve cover for 194, 230, 250 and 292 Chevy inline 6 engines. 1966-1979 stock replacement style valve cover with baffled oil fill and crankcase vent holes.
            
  • Chrome 1987-Up Small Block Chevy Centerbolt Valve Covers, 2-Hole
    Chrome 1987-Up Small Block Chevy Centerbolt Valve Covers, 2-Hole
    x
                

    These stock dimension valve covers are for 1987-up heads and Vortec style small block Chevy heads. They feature a beautiful chrome finish to dress up your engine bay. These valve covers have 2-holes per cover with separate oil fill and PCV holes. Holes are 1-1/4" with baffles.

    • Stock dimension valve covers
    • For 1987-up heads and Vortec style small block Chevy heads
    • Beautiful chrome plated steel finish
    • 2-holes per cover with separate oil fill and PCV holes
    • Grommets are NOT included
    • Sold as a pair
    • Valve Cover Depth:  2-1/8"
    • Hole Size:  1-1/4"
    • Hole Style:  Push-in
    • Baffeled:  Yes
    • Suggested Bolt Length:  3-1/2"
  • Chrome 1987-Up Small Block Chevy Centerbolt Valve Covers, 1-Hole
    Chrome 1987-Up Small Block Chevy Centerbolt Valve Covers, 1-Hole
    x
                

    These stock dimension valve covers are for 1987-up heads and Vortec style small block Chevy heads. They feature a beautiful chrome finish to dress up your engine bay. These valve covers have 1-hole per cover with separate oil fill and PCV holes. Holes are 1-1/4" with baffles.

    • Stock dimension valve covers
    • For 1987-up heads and Vortec style small block Chevy heads
    • Beautiful chrome plated steel finish
    • 1-hole per cover with separate oil fill and PCV holes
    • Holes are 1-1/4" with baffles
    • Grommets are NOT included
    • Sold as a pair
    • Suggested bolt length of 3-1/2"
  • Valve Cover Breather Filter - 1 1/2 Inch
    Valve Cover Breather Filter - 1 1/2 Inch
    x
                Clamp-on style valve cover breathers. Washable for easy clean up and reuseable.
            
  • 1987-Up Small Block Chevy Tall Valve Covers, Flame Milled
    1987-Up Small Block Chevy Tall Valve Covers, Flame Milled
    x
                

    Polished cast aluminum valve covers with the look of billet for your late Small Block Chevy centerbolt heads. Flamed top design. Includes baffles and valve cover mounting bolts.

    • Overall height is 3-3/4"
    • I.D. of the breather hole is 1.176"
    • Use with breathers 910-11033 or 550-2068
    • For applications where a PCV valve is needed, use 910-11034
  • SuperSeal Small Block Ford Valve Cover Gaskets
    SuperSeal Small Block Ford Valve Cover Gaskets
    x
                

    Small Block Ford (SBF) valve cover gasket made with stainless steel frame sandwiched between durometer-tested neoprene rubber. Eliminates leakage caused by internal pressure fluctuations. Won't tear or collapse.

    Reusuable. Package of two. 

    SuperSeal Illustration (GIF)

  • Edelbrock 4144 1960-86 Small Block Chevy Finned Valve Covers w/ Holes
    Edelbrock 4144 1960-86 Small Block Chevy Finned Valve Covers w/ Holes
    x
                

    Classic 1960-1986 Small Block Chevy Edelbrock finned valve covers with oil fill hole. This style of valve covers was first made in the 1950's and they're still cool today. They are tall enough to clear roller rockers.

    • Aluminum
    • One valve cover has a hole and grommet is included for a PCV valve
    • Other valve cover has a threaded hole (female) and a male threaded aluminum cap with O-ring seal
    • Included grommet can be used in place of the cap for a push in breather
    • Includes baffle and pins to use inside the valve cover if desired
  • MSD 31359 8.5mm Spark Plug Wires Set, Chevy HEI, Over Valve Cover
    MSD 31359 8.5mm Spark Plug Wires Set, Chevy HEI, Over Valve Cover
    x
                

    The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of low resistance spark plug wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire.

    To accomplish this, MSD uses a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.

  • 1960-1986 Small Block Chevy Tall Valve Covers, Ball Milled
    1960-1986 Small Block Chevy Tall Valve Covers, Ball Milled
    x
                

    Polished aluminum tall valve covers have the look of billet style. Ball milled top. One 1-3/16" diameter hole per cover for push-in breather. This valve cover has baffles.

    Use 1.25" O.D. grommets (not included).

  • SuperSeal Big Block Chevy Valve Cover Gaskets
    SuperSeal Big Block Chevy Valve Cover Gaskets
    x
                

    Big Block Chevy (BBC) valve cover gasket made with stainless steel frame sandwiched between durometer-tested neoprene rubber. Eliminates leakage caused by internal pressure fluctuations. Won't tear or collapse.

    Reusuable. Package of two.

    SuperSeal Illustration

  • Garage Sale - Fabricated Valve Cover for 2.3 Ford
    Garage Sale
    Garage Sale - Fabricated Valve Cover for 2.3 Ford
    x
                Whether you're going for the drag race look or just trying to save weight, these valve covers are for you!

    These 2300 Pinto 4 Cylinder valve covers come without holes for pcv or oil fill.

     

    These valve covers are garage sale priced because they have been repaired.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • T-Style Wing Nut
    $2.49
    Product Rating: 4.60 Stars
    T-Style Wing Nut
    x
                

    Premium chrome plating and classic styling make this hold down the first choice of rodders everywhere! Threads are extra-long to accomodate nearly any combination of valve cover, clamps and gasket thickness. Just cut off to length you need.  Sold individually.

    Wing nut has 1/4" coarse threads.

  • Blumax S/B Chevy Self-Aligning Roller Rocker Arms, 1.5:1, 3/8 Stud
    Blumax S/B Chevy Self-Aligning Roller Rocker Arms, 1.5:1, 3/8 Stud
    x
                

    BluMax Aluminum Rockers are designed with strength and durability in mind. The rocker bodies feature a deeper relief to accommodate larger valve springs, and are designed with longer slots and specially designed pushrod cups, to take advantage of high lift camshafts and roller lifters without extensive modification.

    The BluMax self-aligning, narrow-body aluminum rollers are for use with center bolt valve cover heads. The narrower profile accommodates the later style Chevrolet engines with center bolt valve covers.

    • Self-aligning, no need for push rod plates
    • Designed to give better clearance with center bolt valve covers
    • Ideal for Vortec and other center-bolt heads

    Cannot be used on heads that have not had the stock "slotted" pushrod hole drilled out to a round hole.  Cannot be used with guide plates.

  • Garage Sale - Oldsmobile Valve Covers for Small Block Chevy
    Garage Sale
    Garage Sale - Oldsmobile Valve Covers for Small Block Chevy
    x
                Please view the product's page for more information
            
  • Garage Sale - B/B Chevy Short Chrome Valve Covers
    Garage Sale
    Garage Sale - B/B Chevy Short Chrome Valve Covers
    x
                

    These valve covers are garage sale priced because the chrome is starting to peel on one valve cover.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

    These smooth, no-name, stamped steel covers have a beautiful chrome finish. Each has a 1.25" push-in breather hole. These valve covers do not contain baffles.

    • Depth: 2-1/4"
    • Holes Per Cover:  1
    • Size & Style of Hole:  1-1/4" push in
    • Suggested Bolt Length:  3/4"
  • Push-In Oil Filler Tube, Chrome
    Push-In Oil Filler Tube, Chrome
    x
                

    Trick looking chrome oil filler extension tubes. Attach to any valve cover filler holes. Push-in style.

    Extends up to 4-1/2" from the valve cover. There is no baffle inside the tube. Outside diameter is 1-3/4".

    Top is notched to accept a twist on cap or breather. There is no breather cap included. Reuse your existing breather or cap. A push-in style grommet could be used. Inside diameter at top is 1-3/4".

  • Small Block Chevy Upper Alternator Bracket, Plain
    Small Block Chevy Upper Alternator Bracket, Plain
    x
                

    Positions alternator just above the intake, between passenger side valve cover and water outlet. Designed to mount GM "Delco" alternators on S/B Chevy V8 using '55-'68 short style water pumps.

    Alternator Bracket Illustration (GIF)

    916-67899 Instructions (PDF)

  • Garage Sale - Small Block Chevy Tall Chrome Valve Covers
    Garage Sale
    Garage Sale - Small Block Chevy Tall Chrome Valve Covers
    x
                

    These valve covers are garage sale priced because they have some dents from shipping.  These have been bolted on.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    These smooth, no-name, stamped steel covers have a beautiful chrome finish. Each has a 1.25" push-in breather hole. These valve covers have internal baffles.

    Suggested bolt length is 3/4".

  • Garage Sale - Chevy LS1/LS6 Finned Valve Covers, Polished
    Garage Sale
    Garage Sale - Chevy LS1/LS6 Finned Valve Covers, Polished
    x
                Please view the product's page for more information
            
  • Garage Sale - Offenhauser 4039 Valve Cover Engine Breather
    Garage Sale
    Garage Sale - Offenhauser 4039 Valve Cover Engine Breather
    x
                Please view the product's page for more information
            
  • Garage Sale - Technostalgia 8100 Oldsmobile Centerbolt Valve Cover Adapters
    Garage Sale
    Garage Sale - Technostalgia 8100 Oldsmobile Centerbolt Valve Cover Adapters
    x
                

    Allows installation of 1987-Newer centerbolt valve covers on 1955-1986 S/B Chevy Heads, even early staggerbolt heads. Gaskets NOT included, but special bolts and spacers are.

     

    These valve cover adapters are garage sale priced because they have been test fit and returned.  These are missing a few of the mounting bolts.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

  • Garage Sale - Offenhauser 4039 Valve Cover Engine Breather
    Garage Sale
    Garage Sale - Offenhauser 4039 Valve Cover Engine Breather
    x
                Please view the product's page for more information
            
  • Garage Sale - Speedway S/B Chevy Aluminum Valve Covers w/ Crossover Breather Tube
    Garage Sale
    Garage Sale - Speedway S/B Chevy Aluminum Valve Covers w/ Crossover Breather Tube
    x
                

    Includes two tall cast aluminum valve covers, two shielded breathers, one crossover tube, four stainless clamps and two hoses.

    • Tall valve covers clear most stud girdles or roller rocker arms
    • Washable breather filter elements
    • Fits '60-'86 Small Block Chevy V8 

     

    These are garage sale priced because they have been installed.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Ford Racing 302-001 Small Block Aluminum Valve Covers
    Ford Racing 302-001 Small Block Aluminum Valve Covers
    x
                

    Polished aluminum valve covers are 3-3/4" tall with black letters. Will clear stud girdle and roller rockers. One hole in each cover for a PCV or a breather. Grommets are supplied for both, as well as baffle plates to install inside the covers for oil control. Comes with instructions.

    • Style of hole: Push-in
    • Suggested bolt length: 1"
    • These valve covers have baffles
  • Grommets for Push-In Oil Breathers, 1-1/4 Inch O.D., 1 Inch I.D.
    Grommets for Push-In Oil Breathers, 1-1/4 Inch O.D., 1 Inch I.D.
    x
                

    Our replacement 1-1/4" grommets are made of a black neoprene material for extended service life. Can be used as a plug, or a grommet for push-in style oil breather caps by trimming off the bottom.

    Fits into a 1-1/4" valve cover hole.

  • Garage Sale - 1987-Up Small Block Chevy Tall Finned Valve Covers
    Garage Sale
    Garage Sale - 1987-Up Small Block Chevy Tall Finned Valve Covers
    x
                Please view the product's page for more information
            
  • Garage Sale - Fab. Alum. LS/Vortec Valve Covers w/o Coil Stands, Satin Silver Anodized
    Garage Sale
    Garage Sale - Fab. Alum. LS/Vortec Valve Covers w/o Coil Stands, Satin Silver Anodized
    x
                Please view the product's page for more information
            
  • Garage Sale - Offenhauser Hi-Riser Valve Cover Breather
    Garage Sale
    Garage Sale - Offenhauser Hi-Riser Valve Cover Breather
    x
                

    This extra-tall (5") 2-piece crankcase breather is perfect for Tunnel-Ram or Blower equipped engines. Mounting angle of 30° is ideal for the intake manifold side of a V8's valve covers. Polished aluminum construction with cleanable, reuseable polyurethane foam elements.

    Includes gasket, bolts and mounting hole template.

     

    This breather is garage sale priced because it is missing the cap.  What you see is what you get. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Chevy LS1/LS6 Finned Valve Covers, Polished
    Chevy LS1/LS6 Finned Valve Covers, Polished
    x
                

    If you are running a '97-Up LS1 style engine in your classic street rod, these valve covers are for you. These finned covers have a cast-in breather/PCV hole in each cover. They only use the 2 end bolts for mounting (stock uses four) for a cleaner look. The sand cast aluminum construction provides stiffness so four bolts are not needed to apply pressure evenly to the gasket. Comes with gaskets and hardware.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Cast-in internal baffles
    • Clears Jesel roller rockers
    • Mounting hardware included

    Note: There are no provisions for the original coil packs. Use our relocation harness to move coil packs to the fenders or firewall. 

    Finned Valve Cover Specs (PDF) 

  • Garage Sale - Fabricated Aluminum LS/Vortec Valve Covers w/o Coil Stands, Polished
    Garage Sale
    Garage Sale - Fabricated Aluminum LS/Vortec Valve Covers w/o Coil Stands, Polished
    x
                Please view the product's page for more information
            
  • Chevy LS1/LS6 Finned Valve Covers, Plain
    Chevy LS1/LS6 Finned Valve Covers, Plain
    x
                

    If you are running a '97-Up LS1 style engine in your classic street rod, these valve covers are for you. These finned covers have a cast-in breather/PCV hole in each cover. They only use the 2 end bolts for mounting (stock uses four) for a cleaner look. The sand cast aluminum construction provides stiffness so four bolts are not needed to apply pressure evenly to the gasket. Comes with gaskets and hardware.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Cast-in internal baffles
    • Clears Jesel roller rockers
    • Mounting hardware included

    Note: There are no provisions for the original coil packs. Use our relocation harness to move coil packs to the fenders or firewall. 

    Finned Valve Cover Specs (PDF) 

Goto Previous PagePrevious Page
1 2 3 4