Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"street stock mustang ii" Page 1 of 5

  • Speedway Mustang II Tubular Upper Control Arm, Stock Width
    Speedway Mustang II Tubular Upper Control Arm, Stock Width
    x
                

    You don't have to look any farther for tubular control arms for your hot rod. Full .120 wall, 1" diameter tubing, fixture welded and features screw-in ball joints and no-squeak bushings. Will work with nearly any stock or aftermarket crossmember.

    Replaces 1974-80 Pinto, Bobcat and 1974-78 Mustang II control arms.

    • Full .120" wall
    • 1" diameter tubing
    • Fixture welded
    • Screw-in ball joints
    • No-squeak bushings
    • Works with all Mustang II crossmembers we sell

    Note: This item is sold individually.

    910-34320 Tubular Upper Control Arm Instructions (PDF)

    Tubular Control Arm Chart (GIF)

    Check out our 5/8" narrower than stock width upper control arms (91034326) for applications that require a shorter track width.  These allow you to tuck the wheels up under the fenders without having to buy expensive special offset wheels.

  • Pro Shocks SS300 Pro Street Stock Shock, Pinto Front
    Pro Shocks SS300 Pro Street Stock Shock, Pinto Front
    x
                

    Pro street stock shocks are available in adjustable and non-adjustable. Designed to replace the stock shocks in the original mounting locations. They have extra heavy damping, designed for the punishment of Street Stock racing.

    For 1971-80 Pinto and 1974-78 Mustang II.

  • Mustang II IFS, Std. Tubular Control Arms, Stock Springs, Dropped Spindles
    Mustang II IFS, Std. Tubular Control Arms, Stock Springs, Dropped Spindles
    x
                Includes standard upper and offset strutless lower control arms, 2" dropped spindles, rubber brake lines, new black stock type springs and  shocks, new manual or rebuilt power rack & pinion with bushings and  new tie rods. The 11" brake kit features GM Metric calipers, with your  choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Stock Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-

  • Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
    Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
    x
                

    Includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, new black stock type springs and shocks, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles, Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2&qu

  • Mustang II Disc Brake Rotor, 5 on 4-3/4 Inch
    Mustang II Disc Brake Rotor, 5 on 4-3/4 Inch
    x
                Vented stock 9-1/4" diameter brake rotors for 1974-1980  Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using  '49-'54 Chevy spindles). Brake rotors are new, not plugged or re-drilled. Has a  5 on 4-3/4" bolt pattern with corresponding 7/16" diameter fine thread  wheel studs.

    Be sure to install new bearings and seals (910-31000) with your new disc brake rotors.
  • Speedway Mustang II Offset Tubular Control Arms, Stock Spring No Strut
    Speedway Mustang II Offset Tubular Control Arms, Stock Spring No Strut
    x
                Please view the product's page for more information
            
  • Mustang II Power and Manual Rack & Pinions
    Mustang II Power and Manual Rack & Pinions
    x
                Fits aftermarket Mustang II crossmembers. Available in manual or power steering. Mount bushings are included with the Power version, but mount bushings are NOT included in the Manual version.

    MANUAL: New manual rack and pinion steering assembly for Pinto/Bobcat/Mustang II based front suspensions in street rods and kit cars. 9/16"-26 spline input shaft. 16" mount centers. 

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    91034340 CPP Instructions (PDF)  

  • Speedway Mustang II Tubular Lower Control Arm for Stock, Strut Rod
    Speedway Mustang II Tubular Lower Control Arm for Stock, Strut Rod
    x
                

    You don't have to look any farther for tubular control arms for your hot rod. These tubular lower control arms are designed to be used stock style Mustang II springs and shocks as well as Mustang II crossmembers that come without the welded-in A-Arm gussets. These control arms will need strut rods for proper installation. They are designed to be used with stock style springs and shocks. Will work with nearly any stock or aftermarket crossmember. Welding may be required on some applications.

    Replaces 1974-80 Pinto, Bobcat and 1974-78 Mustang II control arms.

    • Full .120" wall
    • 1" diameter tubing
    • Fixture welded
    • Screw-in ball joints
    • No-squeak bushings
    • Designed to correspond with stock style Mustang II springs and shocks
    • Works with Mustang II crossmembers that come without lower A-Arm tabs and require strut rods
    • Choose Left or Right side

    Note: This item is sold individually.

    Tubular Control Arms Application Chart (GIF)

    910-34327 Tubular Lower Control Arm Instructions

  • Heidts CA-102 Mustang II Tubular Lower Control Arm for Stock, Strut Rod
    Heidts CA-102 Mustang II Tubular Lower Control Arm for Stock, Strut Rod
    x
                Please view the product's page for more information
            
  • Heidts Mustang II Crossmember for 1964-1970 Ford Mustang Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1964-1970 Ford Mustang Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31955 Instructions (PDF)

  • Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    x
                

    These Speedway Mustang IFS kits for 1949-1954 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1949-1954 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a

  • Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    x
                

    These Speedway Mustang IFS kits for 1937-39 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1939 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a "

  • Speedway Mustang II Tubular Upper Control Arms, Stock Width, Pair
    New
    Speedway Mustang II Tubular Upper Control Arms, Stock Width, Pair
    x
                
    You don't have to look any farther for tubular control arms for your hot rod. Full .120 wall, 1" diameter tubing, fixture welded and features screw-in ball joints and no-squeak bushings. Will work with nearly any stock or aftermarket crossmember.

    Replaces 1974-80 Pinto, Bobcat and 1974-78 Mustang II control arms.

    • Full .120" wall
    • 1" diameter tubing
    • Fixture welded
    • Stock Width
    • Screw-in ball joints
    • No-squeak bushings
    • Works with all Mustang II crossmembers we sell
    • Sold as a pair

    910-35320 Tubular Upper Control Arm Instructions (PDF)

    Tubular Control Arm Chart (GIF)

    Check out our 5/8" narrower than stock width upper control arms (91034326) for applications that require a shorter track width.  These allow you to tuck the wheels up under the fenders without having to buy expensive special offset wheels.

  • Heidts CA103MS Mustang II Tubular Lower Arms for Coil-overs, No Strut Rod
    Heidts CA103MS Mustang II Tubular Lower Arms for Coil-overs, No Strut Rod
    x
                Please view the product's page for more information
            
  • Speedway 1941-1948 Ford Mustang II Deluxe Steel Crossmember
    Speedway 1941-1948 Ford Mustang II Deluxe Steel Crossmember
    x
                Please view the product's page for more information
            
  • Heidts Universal Multi-Fit 60 Econo Mustang II Crossmember Kit
    Heidts Universal Multi-Fit 60 Econo Mustang II Crossmember Kit
    x
                Please view the product's page for more information
            
  • Heidts CX102  1937-39 Chevy Frame Mustang II Crossmember, Weld-On Kit
    Heidts CX102 1937-39 Chevy Frame Mustang II Crossmember, Weld-On Kit
    x
                Please view the product's page for more information
            
  • 37-48 Chevy Car Crossmember
    $299.99
    Product Rating: 4.00 Stars
    37-48 Chevy Car Crossmember
    x
                

    These Speedway Mustang IFS kits for 1937-1948 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are all the special, hard-to-make brackets and mounts you will need to complete the installation, plus illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1948 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers

  • Heidts Mustang II Crossmember for 1949-54 Chevy Car Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1949-54 Chevy Car Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Heidts 1937-39 Chevy Truck Econo Mustang II Crossmember
    Heidts 1937-39 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Mustang II IFS w/ New Stock Control Arms and Stock Spindles, Air Ride
    Mustang II IFS w/ New Stock Control Arms and Stock Spindles, Air Ride
    x
                With our complete Mustang II Independent Front Suspension kit you get   brand new stamped steel upper and lower control arms with polyurethane   bushings, new steel spindles, Rubber Brake Lines, air springs with shocks, new manual rack & pinion with bushings   or remanufactured power rack & pinion with bushings and an 11"  brake  kit featuring GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • New steel spindles
      • Air springs with shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: These IFS kits will require use of strut rods and brackets for the lower control arms.  These kits will work with our replacement strut rod

  • Speedway 1933-34 Ford Mustang II Crossmember
    Speedway 1933-34 Ford Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Mustang II Disc Brake Rotor, 5 on 4-1/2 Inch
    Mustang II Disc Brake Rotor, 5 on 4-1/2 Inch
    x
                Vented stock 9-1/4" diameter brake rotors for 1974-1980  Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using  '49-'54 Chevy spindles). Brake rotors are new, not plugged or re-drilled. Has a  5 on 4-1/2" bolt pattern with corresponding 1/2" diameter fine thread  wheel studs. 

    Be sure to install new bearings and seals (910-31000) with your new disc brake rotors.
  • Mustang II IFS, Std. Tubular Control Arms, Coilover Springs, Stock Spindles
    Mustang II IFS, Std. Tubular Control Arms, Coilover Springs, Stock Spindles
    x
                Hub-to-hub kit includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, Carrera coilovers, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles
      • Coilover Springs
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2" frame widths, you w

  • Heidts Mustang II Crossmember for 1935-40 Ford Frame, Weld-On Assembly
    Heidts Mustang II Crossmember for 1935-40 Ford Frame, Weld-On Assembly
    x
                Please view the product's page for more information
            
  • Basic Brake Kit, GM Metric Caliper/Mustang II Rotor to Early Chevy Spindle
    Basic Brake Kit, GM Metric Caliper/Mustang II Rotor to Early Chevy Spindle
    x
                

    An economical, lightweight front disc brake conversion kit for 1949-54 Chevy car spindles. This kit uses 9-1/4" Mustang rotors with the easy-to-find '78-'88 GM metric calipers. This basic kit includes caliper brackets and hardware.

    Note: Your spindles must be machined to accept this kit, or you can use Speedway modified reproduction forged spindles 916-32100. This kit will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends. To be used only on street rod tube or I-beam front axles when using 1949-54 Chevy spindles commonly used on Model T and Model A to 1936 Ford front ends.

    916-31950 Instructions (PDF)

  • Heidt's Mustang II Crossmember for 1934-36 Chevy Master Frame, Weld-On Kit
    Heidt's Mustang II Crossmember for 1934-36 Chevy Master Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5