Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"street shocks afco" Page 1 of 12

  • AFCO 30022 1979-2004 Mustang Street/Strip Front Strut
    AFCO 30022 1979-2004 Mustang Street/Strip Front Strut
    x
                

    AFCO Mustang Street/Strip coil-over struts incorporate race inspired valving for hard launches, consistent E.T.'s and improved reaction times. The struts completely replace stock units and can be used in the O.E. configuration. The optional coil-over kit & caster/camber plates will allow for ride height adjustment using a coil-over spring.

    • Fixed valving promotes maximum weight transfer
    • BNC valving provides soft rebound dampening while controlling front end "bounce"
    • Coil-over conversion allows ride height adjustment
    • Caster/Camber plates are recommended when lowering the ride height
    • Complete kit allows for correct geometry at any ride height

    Strut package is the perfect complement to AFCO Tubular K-Members and Reactor Series or Eliminator rear shocks.

    Note: AFCO recommends a 10" 200 lb. spring for drag racing, or a 14" 125 lb. spring for other uses.

  • AFCO 1022 10 Series Street/Strip/Track Front Shock, Comp/Reb: 7/4
    AFCO 1022 10 Series Street/Strip/Track Front Shock, Comp/Reb: 7/4
    x
                

    AFCO has been in the shock business for over 20 years and has incorporated their technological knowledge into this 10-Series street/strip/track shock.  This 80/20 front shock allows the front to lift and hold under acceleration, which transfers weight to the rear tires and improves traction.

    Whatever your street stock choice, AFCO has the stock mount shock for you.  These 10-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules.  The split-valve shocks offer additional tuning capabilities over the standard valving. 

    Available Split Valves - Part # 1061022 is a "split valve - easy up" shock used on the front to promote weight transfer under acceleration.  This will enhance forward traction.

    AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

    • Compressed Length: 9.375"
    • Extended Length: 13.375"

    Fits:

    • 1955-86 GM Full Midsize
    • 1955-57 Chevy
    • 1958-70 Impala
    • 1970-81 Camaro/Firebird
    • 1964-89 Chevelle/Monte Carlo
    • 1965-86 Ford Fullsize, Montego and Cougar

     

  • AFCO 1035 10 Series GM Street/Strip Rear Shock, Comp/Rebound: 3/5
    AFCO 1035 10 Series GM Street/Strip Rear Shock, Comp/Rebound: 3/5
    x
                

    AFCO has been in the racing shock business for over 20 years and has incorporated their technological knowledge into this K-Series street/strip shock. These 40/60 rear shocks allow the rear to squat which improves traction through weight transfer.

    These split-valve shocks offer additional tuning capabilities over the standard valving. 

    Available Split Valves - Part # 1061035 is a split valve shock for rear applications.  Soft compression accents weight transfer.  In circle track applications, used on the left rear, this shock tends to tighten corner exit handling.  Used on the right rear, this shock tends to tighten corner entry handling.

    • Compressed Length: 13.00"
    • Extended Length: 21.00"

    Fits:

    • 1955-86 GM Full Midsize
    • 1963-86 Malibu, Chevelle, Monte Carlo, Cutlass and Rega
    • 1968-79 Nova
    • 1958-70 Impala
    • 1964-86 Chevell/Monte Carlo
  • AFCO 1007X Shock End 1/2 I.D. x 1.06 Inch Wide Drag Bearing-Comp Lined
    AFCO 1007X Shock End 1/2 I.D. x 1.06 Inch Wide Drag Bearing-Comp Lined
    x
                

    Replacement Teflon lined spherical bearings for all AFCO shocks except K-Series.

    AFCO Racing's quality and design help these replacement shock bearings stand up to the toughest standards and conditions, from daily commuting to full-on racing. These shock bearings are replacements for your AFCO Racing shocks. They are available for street rod, race, and coil-over applications.

    AFCO Shock End Drag Bearing, Comp Lined

    • 1/2 I.D. x 1.06 Inch Wide
    • standard bearing
    • Bearing housing is 1.06" o.d. and 1" wide.
    • Sleeve is .683" o.d. and .390" wide
  • AFCO 1043 K Series Street/Strip Rear Shock, 79-83 Mustang, 55-57 Chevy
    AFCO 1043 K Series Street/Strip Rear Shock, 79-83 Mustang, 55-57 Chevy
    x
                

    Whatever your street stock choice, AFCO has the stock mount shock for you. These K-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules. AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

    • Comp. Length: 13 " 
    • Ext. Length 21.5" 
    • Comp: 5
    • Rebound: 5
  • AFCO 1020 10 Series Street Stock Front Shock, Comp/Reb: 7/7
    AFCO 1020 10 Series Street Stock Front Shock, Comp/Reb: 7/7
    x
                

    Whatever your street stock choice, AFCO has the stock mount shock for you.  These K-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules.  The split-valve shocks offer additional tuning capabilities over the standard valving. 

    Available Split Valves - Part # 1061022 is a "split valve - easy up" shock used on the front to promote weight transfer under acceleration.  This will enhance forward traction.

    AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

    • Compressed Length: 9.375"
    • Extended Length: 13.375"

    Fits:

    • 1955-86 GM Full Midsize
    • 1970-81 Camaro/Firebird
    • 1965-86 Ford Fullsize, Montego and Cougar
  • AFCO 1021 10 Series Street Stock Front Shock, Comp/Reb: 6/6
    AFCO 1021 10 Series Street Stock Front Shock, Comp/Reb: 6/6
    x
                

    Whatever your street stock choice, AFCO has the stock mount shock for you.  These K-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules.  The split-valve shocks offer additional tuning capabilities over the standard valving. 

    Available Split Valves - Part # 1061022 is a "split valve - easy up" shock used on the front to promote weight transfer under acceleration.  This will enhance forward traction.

    AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

    • Compressed Length: 9.375"
    • Extended Length: 13.375"

    Fits:

    • 1955-86 GM Full Midsize
    • 1970-81 Camaro/Firebird
    • 1965-86 Ford Fullsize, Montego and Cougar
  • AFCO 1032 10 Series Street Shocks, Rear, Camaro/Firebird, Comp 5/Reb 5
    AFCO 1032 10 Series Street Shocks, Rear, Camaro/Firebird, Comp 5/Reb 5
    x
                

    Whatever your street stock choice, AFCO has the stock mount shock for you.  These K-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules.  The split-valve shocks offer additional tuning capabilities over the standard valving. 

    AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

    • 1970-81 Camaro/Firebird
    • Compressed Length: 14.50"
    • Extended Length: 22.50"
  • AFCO 1030 10 Series GM Street Stock Shock, Rear, Comp/Rebound: 5/5
    AFCO 1030 10 Series GM Street Stock Shock, Rear, Comp/Rebound: 5/5
    x
                

    Whatever your street stock choice, AFCO has the stock mount shock for you.  These K-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules.

    AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

    • Compressed Length: 13.00"
    • Extended Length: 21.00"

    Fits:

    • 1955-86 GM Full Midsize
    • 1963-86 Malibu, Chevelle, Monte Carlo, Cutlass and Rega
    • 1968-79 Nova

     

  • AFCO 2495-3D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 5/Reb 3
    AFCO 2495-3D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 5/Reb 3
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center

    Dirt Street and Super Stock Shock Chart (Link) 

  • AFCO 2494D 24 Series Steel Gas Shock, 9 Inch, Right Rear, Comp 4/Reb 4
    AFCO 2494D 24 Series Steel Gas Shock, 9 Inch, Right Rear, Comp 4/Reb 4
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • Compressed Length:  14.95"
    • Extended Length:  23.85"
    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center

    Dirt Modified Swing Arm Gas Shock Chart (Link)

    Dirt Street and Super Stock Shock Chart (Link)  

  • AFCO 1476 Series Fixed Bearing Sealed Body Shock, 7 Inch, Comp 6/Reb 6
    AFCO 1476 Series Fixed Bearing Sealed Body Shock, 7 Inch, Comp 6/Reb 6
    x
                

    AFCO S-Series Fixed Bearing Shocks offer tremendous value by packaging race-proven design, proven value combinations, and durability in an economical, fixed bearing design that can be used with or without coilovers.

    AFCO fixed bearing shocks feature quality bearing ends that allow for free movement in applications where other mounts could be bound and reduce shock effectiveness.

    The available standard valves, as well as split valves, allow for multiple tuning options with a simple shock swap.  When you're ready to win, we have the winning shock!

    • Sealed bodyTwin-Tube designCan be used with or without coilovers
    • Can be mounted upside-down for reduced unsprung weight
    • Compressed Length: 12.75"
    • Extended Length: 19.50"
    • Stroke: 7"

    Dirt Street and Super Stock Shock Chart (Link)  

    Pavement Street and Super Stock Shock Chart (Link)  

  • AFCO 1494 14 Series Fixed Bearing Coilover Shock, 9 Inch, Comp 4/Reb 4
    AFCO 1494 14 Series Fixed Bearing Coilover Shock, 9 Inch, Comp 4/Reb 4
    x
                Please view the product's page for more information
            
  • AFCO 1475 Series Fixed Bearing Sealed Body Shock, 7 Inch, Comp 5/Reb 5
    AFCO 1475 Series Fixed Bearing Sealed Body Shock, 7 Inch, Comp 5/Reb 5
    x
                Please view the product's page for more information
            
  • AFCO 1630SR5 Street Rod Shock-3 Stroke-5/8 Bearing 8.5 Comp-10.75 Ext.
    AFCO 1630SR5 Street Rod Shock-3 Stroke-5/8 Bearing 8.5 Comp-10.75 Ext.
    x
                

    AFCO has been building racing shocks for over 20 years and is now applying this technology to their premium Hot Rod Series Shocks. The Hot Rod Series shocks have superior valving technology that will give you a smooth, controlled ride with improved handling. Of course, looking good is important too so these aluminum smoothie shocks provide a long lasting, high-tech finish that is sure to impress.

    Shocks are supplied with either polyurethane bushings or bearing ends. Works well with solid-axle or coil-sprung front suspensions.

    • Smooth Polished Billet Aluminum Body
    • Factory Dyno Tested for Performance
    • Made in the USA
  • AFCO 1640SR5 Street Rod Shock-4 Stroke-5/8 Bearing 9.5 Comp 12.75 Ext.
    AFCO 1640SR5 Street Rod Shock-4 Stroke-5/8 Bearing 9.5 Comp 12.75 Ext.
    x
                

    AFCO has been building racing shocks for over 20 years and is now applying this technology to their premium Hot Rod Series Shocks. The Hot Rod Series shocks have superior valving technology that will give you a smooth, controlled ride with improved handling. Of course, looking good is important too so these aluminum smoothie shocks provide a long lasting, high-tech finish that is sure to impress.

    Shocks are supplied with either polyurethane bushings or bearing ends. Works well with solid-axle or coil-sprung front suspensions.

    • Smooth Polished Billet Aluminum Body
    • Factory Dyno Tested for Performance
    • Made in the USA
  • AFCO 1630SR Street Rod Shock-3 Stroke-.5 Bearing-8.5 Comp, 10-3/4 Ext.
    AFCO 1630SR Street Rod Shock-3 Stroke-.5 Bearing-8.5 Comp, 10-3/4 Ext.
    x
                

    AFCO has been building racing shocks for over 20 years and is now applying this technology to their premium Hot Rod Series Shocks. The Hot Rod Series shocks have superior valving technology that will give you a smooth, controlled ride with improved handling. Of course, looking good is important too so these aluminum smoothie shocks provide a long lasting, high-tech finish that is sure to impress.

    Shocks are supplied with either polyurethane bushings or bearing ends. Works well with solid-axle or coil-sprung front suspensions.

    • Smooth Polished Billet Aluminum Body
    • Factory Dyno Tested for Performance
    • Made in the USA
  • AFCO 1640SR Street Rod Shock-4 Stroke-.5 Bearing-9.5 Comp, 12-3/4 Ext.
    AFCO 1640SR Street Rod Shock-4 Stroke-.5 Bearing-9.5 Comp, 12-3/4 Ext.
    x
                

    AFCO has been building racing shocks for over 20 years and is now applying this technology to their premium Hot Rod Series Shocks. The Hot Rod Series shocks have superior valving technology that will give you a smooth, controlled ride with improved handling. Of course, looking good is important too so these aluminum smoothie shocks provide a long lasting, high-tech finish that is sure to impress.

    Shocks are supplied with either polyurethane bushings or bearing ends. Works well with solid-axle or coil-sprung front suspensions.

    • Smooth Polished Billet Aluminum Body
    • Factory Dyno Tested for Performance
    • Made in the USA
  • AFCO 1493-5 14 Series Fixed Bearing Coilover Shock 9 In., Comp 3/Reb 5
    AFCO 1493-5 14 Series Fixed Bearing Coilover Shock 9 In., Comp 3/Reb 5
    x
                

    AFCO S-Series Fixed Bearing Shocks offer tremendous value by packaging race-proven design, proven value combinations, and durability in an economical, fixed bearing design that can be used with or without coilovers.

    AFCO fixed bearing shocks feature quality bearing ends that allow for free movement in applications where other mounts could be bound and reduce shock effectiveness.  The available standard valves, as well as split valves, allow for multiple tuning options with a simple shock swap.  When you're ready to win, we have the winning shock!

    • Sealed body
    • Twin-Tube design
    • Can be used with or without coilovers
    • Can be mounted upside-down for reduced unsprung weight
    • Compressed Length: 14.75"
    • Extended Length: 23.50"
    • Stroke: 9"

    Dirt Modified Swing Arm Twin Tube Shock Chart (Link)   

    Dirt Modified 4-Link Twin Tube Shock Chart (Link)  

    Pavement Street and Super Stock Shock Chart (Link)   

     

  • AFCO 1564A Pro Street/Strip Coil-over Shocks
    AFCO 1564A Pro Street/Strip Coil-over Shocks
    x
                

    AFCO S-Series Economy Coil-Overs are great for entry level drag racing. These non-adjustable, steel-bodied shocks are 1/3 lighter than full-size shocks and can be mounted “upside-down” which saves unsprung weight to allow the car to react faster and allows easier adjustment of coil-over hardware.

    • Small body steel shock - lightweight
    • Popular street/strip valving (non-adjustable)
    • Heavy-duty gas design
    • Mounts in standard coil-over location
    • Accepts standard coil-over springs
    • Lowers 60 foot times - improves traction
    • Coil-over kit accepts "standard" 2-1/2" or 2-5/8" coil
    • Includes coil-over kit

    Coil-over hardware included. Uses 2-5/8" coil-over springs (sold separately)

  • AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 4 Inch Stroke, 10 Inch Comp.
    AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 4 Inch Stroke, 10 Inch Comp.
    x
                

    AFCO has been building racing shocks for over 20 years and are now applying their technology to street rod shocks. These aluminum coilover shock kits have superior FIXED valving that will give you a better ride and improve handling.

    • 4 Inch Stroke
    • 10 Inch Compression
    • 14 Inch Extension
    • Each shock is hand built and dyno tested
    • Supplied with two 5/8" I.D. polyurethane bushings
    • Includes AFCO Mirror Finish coilover springs in the rate of your choice
    • Kit includes (2) shocks, (2) springs, and (2) coil-over hardware kits
  • AFCO 24 Series Steel Body Gas Shock, Right Front, 7 Inch, Comp/Reb: 6/6
    AFCO 24 Series Steel Body Gas Shock, Right Front, 7 Inch, Comp/Reb: 6/6
    x
                

    Speedway Motors is proud to be the first to announce the release of AFCO's newly designed IMCA approved steel body gas shocks. These new shocks have all the sophistication of our deflective disc technology wrapped up in an economical & rule friendly, non-adjustable package. These are sure to be the answer for any racer under constraints to experience gas shocks. 

    The new Steel Body 24 Series Gas Shock uses a Floating Piston Design. They are rebuildable and serviceable through an authorized Afco shock rebuild center, and are available in straight or split valve codes. Non coil-over compatible.

    The choice is clear, let the new AFCO Steel Mono-Tube Gas Shocks handle your car all the way to victory lane!

    Dirt Street and Super Stock Shock Chart (Link)  

  • AFCO 40023 Strut Caster/Camber Plates, 1990-93 Mustang
    AFCO 40023 Strut Caster/Camber Plates, 1990-93 Mustang
    x
                

    AFCO Mustang Street/Strip coil-over struts incorporate race inspired valving for hard launches, consistent E.T.'s and improved reaction times. The struts completely replace stock units and can be used in the O.E. configuration. The optional coil-over kit & caster/camber plates will allow for ride height adjustment using a coil-over spring.

    • Caster/Camber plates are recommended when lowering the ride height
    • Complete kit allows for correct geometry at any ride height

    Strut package is the perfect complement to AFCO Tubular K-Members and Reactor Series or Eliminator rear shocks.

    Note: AFCO recommends a 10" 200 lb. spring for drag racing, or a 14" 125 lb. spring for other uses.

  • AFCO 2475D 24 Series Steel Gas Shock, Left Front, 7 Inch, Comp 5/Reb 6
    AFCO 2475D 24 Series Steel Gas Shock, Left Front, 7 Inch, Comp 5/Reb 6
    x
                

    Speedway Motors is proud to be the first to announce the release of AFCO's newly designed IMCA approved steel body gas shocks. These new shocks have all the sophistication of our deflective disc technology wrapped up in an economical & rule friendly, non-adjustable package. These are sure to be the answer for any racer under constraints to experience gas shocks. 

    The new Steel Body 24 Series Gas Shock uses a Floating Piston Design. They are rebuildable and serviceable through an authorized Afco shock rebuild center, and are available in straight or split valve codes. Non coil-over compatible.

    The choice is clear, let the new AFCO Steel Mono-Tube Gas Shocks handle your car all the way to victory lane!

    Dirt Street and Super Stock Shock Chart (Link)  

  • AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 3 Inch Stroke, 9 Inch Comp.
    AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 3 Inch Stroke, 9 Inch Comp.
    x
                

    AFCO has been building racing shocks for over 20 years and are now applying their technology to street rod shocks. These aluminum coilover shock kits have superior FIXED valving that will give you a better ride and improve handling.

    • Each shock is hand built and dyno tested
    • Supplied with two 5/8" I.D. polyurethane bushings
    • Includes AFCO Mirror Finish coilover springs in the rate of your choice
    • Kit includes (2) shocks, (2) springs, and (2) coil-over hardware kits
  • AFCO 20122-1 Pro Street Shock Hardware, Spring Seat
    AFCO 20122-1 Pro Street Shock Hardware, Spring Seat
    x
                Replacement parts and hardware for AFCO Pro Street Series coilover shocks.
            
  • AFCO 2475-3D 24 Series Steel Gas Shock, Left Front-7 Inch-Comp 5/Reb 3
    AFCO 2475-3D 24 Series Steel Gas Shock, Left Front-7 Inch-Comp 5/Reb 3
    x
                

    Speedway Motors is proud to be the first to announce the release of AFCO's newly designed IMCA approved steel body gas shocks. These new shocks have all the sophistication of our deflective disc technology wrapped up in an economical & rule friendly, non-adjustable package. These are sure to be the answer for any racer under constraints to experience gas shocks. 

    The new Steel Body 24 Series Gas Shock uses a Floating Piston Design. They are rebuildable and serviceable through an authorized Afco shock rebuild center, and are available in straight or split valve codes. Non coil-over compatible.

    The choice is clear, let the new AFCO Steel Mono-Tube Gas Shocks handle your car all the way to victory lane!

    Dirt Street and Super Stock Shock Chart (Link)  

  • AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 7 Inch Stroke, 13 Inch Comp.
    AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 7 Inch Stroke, 13 Inch Comp.
    x
                

    AFCO has been building racing shocks for over 20 years and are now applying their technology to street rod shocks. These aluminum coilover shock kits have superior FIXED valving that will give you a better ride and improve handling.

    • Each shock is hand built and dyno tested
    • Supplied with two 5/8" I.D. polyurethane bushings
    • Includes AFCO Mirror Finish coilover springs in the rate of your choice
    • Kit includes (2) shocks, (2) springs, and (2) coil-over hardware kits
  • AFCO 2475-7 24 Series Steel Body Gas Shock-7 Inch Stroke, Comp 5/Reb 7
    AFCO 2475-7 24 Series Steel Body Gas Shock-7 Inch Stroke, Comp 5/Reb 7
    x
                

    Speedway Motors is proud to be the first to announce the release of AFCO's newly designed IMCA approved steel body gas shocks. These new shocks have all the sophistication of our deflective disc technology wrapped up in an economical & rule friendly, non-adjustable package. These are sure to be the answer for any racer under constraints to experience gas shocks. 

    The new Steel Body 24 Series Gas Shock uses a Floating Piston Design. They are rebuildable and serviceable through an authorized Afco shock rebuild center, and are available in straight or split valve codes. Coil-over and non coil-over compatible.

    The choice is clear, let the new AFCO Steel Mono-Tube Gas Shocks handle your car all the way to victory lane!

    Pavement Street and Super Stock Shock Chart (Link)   

  • AFCO 5-1/2 x 11 Inch Street Stock Front Springs, 1970-92 GM Passenger
    AFCO 5-1/2 x 11 Inch Street Stock Front Springs, 1970-92 GM Passenger
    x
                

    There's a lot riding on your springs-literally. Springs are your car's connection to the ground, and their performance is directly related to all other suspension components. Inconsistent, weak springs can cause a multitude of handling problems , and, in some cases, dangerous situations. When it comes to choosing coil springs, there are many alternatives, but if you want the best you can get, the choice is clear: CHOOSE AFCOILS. 

    All AFCOILS carry a lifetime warranty to remain within 2% of the original nominal free height. Choose your rate. 

    Fits 1973 Chevelle/Malibu; 1973-1988 Monte Carlo, Cutlass, Regal, Grand Prix; and 1970-1992 Camaro.

    • Coil spring is machine-ground on both ends to tolerances within 1 degree and then pressed to solid height and "pre-set" to eliminate any potential for additional set
    • Optimized material thickness and coil spacing to achieve the best possible design for each rate and height of spring in the product line
    • Super-high tensile strength chrome silicon wire for long life and and a consistent rate
    • Springs are cold wound on the latest automated coiling equipment and heat treated twice during manufacturing to withstand the most abusive conditions
    • To enhance durability, AFCOILS are shot-peened and coated with a durable finish
  • AFCO 20131-1 Pro Street Shock Hardware, Adjuster Nut
    AFCO 20131-1 Pro Street Shock Hardware, Adjuster Nut
    x
                Replacement parts and hardware for AFCO Pro Street Series coilover shocks.
            
  • AFCO 1994 R Series Large Body Steel Twin-Tube Shock-9 In, Comp 4/Reb 4
    AFCO 1994 R Series Large Body Steel Twin-Tube Shock-9 In, Comp 4/Reb 4
    x
                Please view the product's page for more information
            
  • AFCO 1031 10 Series GM Street Stock Shock, Rear, Comp/Rebound: 6/6
    AFCO 1031 10 Series GM Street Stock Shock, Rear, Comp/Rebound: 6/6
    x
                

    Whatever your street stock choice, AFCO has the stock mount shock for you.  These K-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules.

    AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

    • Compressed Length: 13.00"
    • Extended Length: 21.00"

    Fits:

    • 1955-86 GM Full Midsize
    • 1963-86 Malibu, Chevelle, Monte Carlo, Cutlass and Rega
    • 1968-79 Nova

     

  • AFCO 2494-6 24 Series Steel Body Gas Shock-9 Inch Stroke, Comp 4/Reb 6
    AFCO 2494-6 24 Series Steel Body Gas Shock-9 Inch Stroke, Comp 4/Reb 6
    x
                

    Speedway Motors is proud to be the first to announce the release of AFCO's newly designed IMCA approved steel body gas shocks. These new shocks have all the sophistication of our deflective disc technology wrapped up in an economical & rule friendly, non-adjustable package. These are sure to be the answer for any racer under constraints to experience gas shocks. 

    The new Steel Body 24 Series Gas Shock uses a Floating Piston Design. They are rebuildable and serviceable through an authorized Afco shock rebuild center, and are available in straight or split valve codes. Coil-over and non coil-over compatible.

    The choice is clear, let the new AFCO Steel Mono-Tube Gas Shocks handle your car all the way to victory lane!

    Dirt Modified 4-Link Gas Shock Chart (Link)    

    Pavement Street and Super Stock Shock Chart (Link)   

  • AFCO 1042 K Series Street Stock Rear Shock, 1974-78 Mustang II
    AFCO 1042 K Series Street Stock Rear Shock, 1974-78 Mustang II
    x
                

    Whatever your street stock choice, AFCO has the stock mount shock for you.  These K-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules. 

    AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

  • AFCO 1650SR Street Rod Front Shock, 5 Stroke, 1/2 Bearing, 11 Comp
    AFCO 1650SR Street Rod Front Shock, 5 Stroke, 1/2 Bearing, 11 Comp
    x
                

    AFCO has been building racing shocks for over 20 years and is now applying this technology to their premium Hot Rod Series Shocks. The Hot Rod Series shocks have superior valving technology that will give you a smooth, controlled ride with improved handling. Of course, looking good is important too so these aluminum smoothie shocks provide a long lasting, high-tech finish that is sure to impress.

    Shocks are supplied with either polyurethane bushings or bearing ends. Works well with solid-axle or coil-sprung front suspensions.

    • Smooth Polished Billet Aluminum Body
    • Factory Dyno Tested for Performance
    • Made in the USA
  • AFCO 1650SR5 Street Rod Shock-5 Stroke-5/8 Bearing-11 Comp, 15-1/2 Ext
    AFCO 1650SR5 Street Rod Shock-5 Stroke-5/8 Bearing-11 Comp, 15-1/2 Ext
    x
                

    AFCO has been building racing shocks for over 20 years and is now applying this technology to their premium Hot Rod Series Shocks. The Hot Rod Series shocks have superior valving technology that will give you a smooth, controlled ride with improved handling. Of course, looking good is important too so these aluminum smoothie shocks provide a long lasting, high-tech finish that is sure to impress.

    Shocks are supplied with either polyurethane bushings or bearing ends. Works well with solid-axle or coil-sprung front suspensions.

    • Smooth Polished Billet Aluminum Body
    • Factory Dyno Tested for Performance
    • Made in the USA
  • AFCO 2494 24 Series Steel Body Gas Shock, 9 Inch Stroke, Comp/Reb: 4/4
    AFCO 2494 24 Series Steel Body Gas Shock, 9 Inch Stroke, Comp/Reb: 4/4
    x
                

    Speedway Motors is proud to be the first to announce the release of AFCO's newly designed IMCA approved steel body gas shocks. These new shocks have all the sophistication of our deflective disc technology wrapped up in an economical & rule friendly, non-adjustable package. These are sure to be the answer for any racer under constraints to experience gas shocks. 

    The new Steel Body 24 Series Gas Shock uses a Floating Piston Design. They are rebuildable and serviceable through an authorized Afco shock rebuild center, and are available in straight or split valve codes. Coil-over and non coil-over compatible.

    The choice is clear, let the new AFCO Steel Mono-Tube Gas Shocks handle your car all the way to victory lane!

    Dirt Modified Swing Arm Gas Shock Chart (Link)  

    Dirt Modified 4-Link Gas Shock Chart (Link)  

    Pavement Street and Super Stock Shock Chart (Link)   

     

  • Afco Street Rod Gas Shocks
    From: $34.99
    New
    Afco Street Rod Gas Shocks
    x
                These steel body shocks feature quality urethane bushings with steel mounting sleeves.  They are perfect for your custom street rod and are not intended to be used with coil-over springs.
    • Designed for front or rear axle use
    • 5/8" eyelets
    • 14.50" extended length
    • 9.5" compressed length
    • 1.63" body diameter
    • Choose from black painted or chrome finishes
  • AFCO 1475-3 14 Series Fixed Bearing Sealed Shock-7 Inch, Comp 5/Reb 3
    AFCO 1475-3 14 Series Fixed Bearing Sealed Shock-7 Inch, Comp 5/Reb 3
    x
                

    AFCO S-Series Fixed Bearing Shocks offer tremendous value by packaging race-proven design, proven value combinations, and durability in an economical, fixed bearing design that can be used with or without coilovers.

    AFCO fixed bearing shocks feature quality bearing ends that allow for free movement in applications where other mounts could be bound and reduce shock effectiveness.

    The available standard valves, as well as split valves, allow for multiple tuning options with a simple shock swap.  When you're ready to win, we have the winning shock!

    • Sealed bodyTwin-Tube designCan be used with or without coilovers
    • Can be mounted upside-down for reduced unsprung weight
    • Compressed Length: 12.75"
    • Extended Length: 19.50"
    • Stroke: 7"

    Dirt Modified Swing Arm Twin Tube Shock Chart (Link)   

    Dirt Modified 4-Link Twin Tube Shock Chart (Link)  

    Dirt Street and Super Stock Shock Chart (Link)  

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 12