Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"stock car chevy" Page 1 of 19

  • 1955-1985 Small Block Chevy Stock Car Racing Clutch Kit
    1955-1985 Small Block Chevy Stock Car Racing Clutch Kit
    x
                This stock car racing clutch package lets you order all the parts you need with one easy part number. 1-1/8"-10 spline disc. 

    Included:
    • Bellhousing
    • 153 Tooth Lightweight Flywheel
    • ARP Flywheel Bolts
    • 10-1/2" Lightweight Pressure Plate
    • ARP Pressure Plate Bolts
    • Solid Hub Organic Clutch Disc
    • Hydraulic Release Bearing
    • Extended Pilot Bearing
    • Clutch Alignment Tool
  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

  • Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Black
    Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Black
    x
                

    These fender well headers provide the ultimate performance for 396-502 big block Chevy V8s in 1955-57 Chevy car applications. They kick up over the frame rail and exit just at the bottom of the cowl, which makes them perfect for Gasser-style rods and drag cars. Plus, these headers feature long primary tubes that help produce more horsepower and torque than shorter, more compact headers.

    These headers are not for the faint of heart since you must cut the inner fender panels to make them fit, and tire clearance can be a problem on some applications. They may require smaller front tires to avoid contact. The stock emergency brake rod must also be altered. Can be used with most oil filter systems or transmission and starter combinations. The headers are designed to be used with engines in the stock location, not lowered as many kits do, so all '55-'57 cars should check motor mount positioning before ordering.

    • Header flange has 1-13/16” x 1-13/16" port size
    • Will require fender well cutting or alteration
    • High temp black paint finish
    • Includes bolts and gaskets
    • Note: This header actually goes upward from the head instead of down before dropping over the frame rails. From the top of the head flange to the top of the tubes is approximately 9-1/2". 

    Header Dimensions (GIF)

  • Small Block Chevy Tight Fit Headers, AHC Coated
    Small Block Chevy Tight Fit Headers, AHC Coated
    x
                

    These AHC small-block Chevy tight fit headers are the most universal steel tube headers available. These performance headers fit difficult applications where space is limited. They are a favorite for street rods, as well as many 1950's and 1960's cars and vintage trucks. These ceramic coated headers provide superior performance and durability.

    Tight Tuck headers are the solution to many problems associated with engine swaps in modern street rods. Tight Tucks fit in the tightest of engine compartments and clear all stock motor mounts. Most headers are manufactured from durable 16-gauge tubing and comes complete with gaskets, header bolts and collector reducers.

    • Most tight fit header applications require the use of Accel shorty spark plugs
    • Round port
    • Compact design
    • Will NOT fit angle plug heads
    • Includes reducers, gaskets and bolts
    • Armor Hot Coat finish

    Header Dimensions (JPG)

  • Ram Clutches 8351 7.25 Inch Stock Car 3-Disc Clutch, Chevy Pre-1986
    Ram Clutches 8351 7.25 Inch Stock Car 3-Disc Clutch, Chevy Pre-1986
    x
                

    Ram has put their extensive knowledge to work developing this extremely durable 7-1/4" clutch. The four paddle multi disc clutch design has twice the friction material of other 7-1/4" clutch units and features a proprietary friction material known for its outstanding durability. The Ram 7-1/4 will also bolt directly to most existing 7-1/4" flywheels.

    Multi-Disc Features:  

    • New internal drive mechanism provides smooth, driveable engagement
    • Twice the friction material of other 7.25" clutches
    • Proprietary Ram friction mix known for outstanding durability
    • Discs feature 8 rivet hubs for added torque capacity
    • Bolts directly to existing 7.25" flywheels
    • Chevy applications use Ram throw out bearing 605-48100
    • 3-disc Clutch: 9.7 lbs (weight without the button)

    Tech Tip:  When installing a new multi disc clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Ram Clutches 8371 7.25 Inch Stock Car 3-Disc Clutch, Chevy 1986-Up
    Ram Clutches 8371 7.25 Inch Stock Car 3-Disc Clutch, Chevy 1986-Up
    x
                

    Ram has put their extensive knowledge to work developing this extremely durable 7-1/4" clutch. The four paddle multi disc clutch design has twice the friction material of other 7-1/4" clutch units and features a proprietary friction material known for its outstanding durability. The Ram 7-1/4 will also bolt directly to most existing 7-1/4" flywheels.

    Multi-Disc Features:  

    • New internal drive mechanism provides smooth, driveable engagement
    • Twice the friction material of other 7.25" clutches
    • Proprietary Ram friction mix known for outstanding durability
    • Discs feature 8 rivet hubs for added torque capacity
    • Bolts directly to existing 7.25" flywheels
    • Chevy applications use Ram throw out bearing 605-48100
    • 3-disc Clutch: 9.7 lbs (weight without the button)

    Tech Tip:  When installing a new multi disc clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Ram Clutches 8651 7.25 Inch Stock Car 2-Disc Clutch, Chevy Pre-1986
    Ram Clutches 8651 7.25 Inch Stock Car 2-Disc Clutch, Chevy Pre-1986
    x
                

    Ram has put their extensive knowledge to work developing this extremely durable 7-1/4" clutch. The four paddle multi disc clutch design has twice the friction material of other 7-1/4" clutch units and features a proprietary friction material known for its outstanding durability. The Ram 7-1/4 will also bolt directly to most existing 7-1/4" flywheels.

    Multi-Disc Features:  

    • New internal drive mechanism provides smooth, driveable engagement
    • Twice the friction material of other 7.25" clutches
    • Proprietary Ram friction mix known for outstanding durability
    • Discs feature 8 rivet hubs for added torque capacity
    • Bolts directly to existing 7.25" flywheels
    • Chevy applications use Ram throw out bearing 605-48100
    • 2-disc Clutch: 8.2 lbs (weight without the button)

    Tech Tip:  When installing a new multi disc clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Speedway 1949-54 Chevy Passenger Car Disc Brake Conversion Kit
    Speedway 1949-54 Chevy Passenger Car Disc Brake Conversion Kit
    x
                
    This kit allows you to upgrade your 1949-1954 Chevy car to front disc brakes and retain the original 5 on 4-3/4 inch bolt pattern. Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This kit includes everything you need to convert your stock 1949-1954 Chevy car to disc brakes. 
    • Works with stock passenger car spindles
    • No machining required
    • 11" diameter vented rotors
    • 2-1/2" single-piston brake calipers
    • 5 on 4-3/4 inch bolt pattern
    • Works with most 15" diameter wheels
    • Not for straight axle
    • Works best with 1949-54 Chevy brake pedal/master/booster assembly 910-19542

    Instructions (PDF)

  • 1986-Up Small Block Chevy Stock Car Racing Clutch Kit
    1986-Up Small Block Chevy Stock Car Racing Clutch Kit
    x
                This stock car racing clutch package lets you order all the parts you need with one easy part number. 1-1/8"-10 spline disc. 

    Included:
    • Bellhousing
    • 153 Tooth Lightweight Flywheel
    • ARP Flywheel Bolts
    • 10-1/2" Lightweight Pressure Plate
    • ARP Pressure Plate Bolts
    • Solid Hub Organic Clutch Disc
    • Hydraulic Release Bearing
    • Extended Pilot Bearing
    • Clutch Alignment Tool
  • Book/Manual - How to Build Max-Performance Chevy Big Blocks on a Budget
    Book/Manual - How to Build Max-Performance Chevy Big Blocks on a Budget
    x
                The Chevy big-block set an illustrious record  in stock car racing and powered some of the fastest and most exclusive  Chevy muscle cars of the 1960s and 1970s, such as the Chevelle,  Corvette, and Camaro. As a result the Chevy big block became as iconic  as the cars it powered. But building a Chevy big-block can be a very  expensive endeavor and many different aspects require attention to  attain maximum performance on a reasonable budget. In How to Build  Max-Performance Chevy Big-Blocks on a Budget, master engine builder and  veteran author David Vizard imparts his 50 years of engine building  experience and unique insight, so the reader can invest wisely and build  a maximum-performance Chevy big-block. Like Vizard's top-selling book  How to Build Max-Performance Chevy Small-Blocks on a Budget, readers are  shown how to get the optimal machining performed, select the ideal  parts, and assemble the strongest engine package for a budget of $1,900  to $15,000. This engine building book offers a practical, methodical, and revealing  approach for disassembly, machining, preparation, modification, and  assembly of a big-block Chevy. Vizard thoroughly explains how to obtain  maximum performance on a budget and includes eight affordable and  powerful engine builds in every price range. Any enthusiast with a  big-block Chevy can benefit greatly from the experience and knowledge  that best-selling author Vizard provides, making this engine building book a welcome  additio
            
  • Big Block Chevy Fenderwell Headers for 1955-57 Chevy, AHC Coated
    Big Block Chevy Fenderwell Headers for 1955-57 Chevy, AHC Coated
    x
                

    These fender well headers provide the ultimate performance for 396-502 big block Chevy V8s in 1955-57 Chevy car applications. They kick up over the frame rail and exit just at the bottom of the cowl, which makes them perfect for Gasser-style rods and drag cars. These headers feature long primary tubes that help produce more horsepower and torque than shorter, more compact headers. Plus, the AHC ceramic coating provides additional horsepower gains along with decreased heat soak of other engine components.

    These headers are not for the faint of heart since you must cut the inner fender panels to make them fit, and tire clearance can be a problem on some applications. They may require smaller front tires to avoid contact. The stock emergency brake rod must also be altered. Can be used with most oil filter systems or transmission and starter combinations. The headers are designed to be used with engines in the stock location, not lowered as many kits do, so all '55-'57 cars should check motor mount positioning before ordering.

    • Header flange has 1-13/16” x 1-13/16" port size
    • Will require fender well cutting or alteration
    • 2" primary tube O.D.
    • 32" primary tube length
    • 3-1/2" collector tube O.D.
    • Polished ceramic coated finish
    • Includes bolts and gaskets

    Header Dimensions

  • 37-48 Chevy Car Crossmember
    $299.99
    Product Rating: 4.00 Stars
    37-48 Chevy Car Crossmember
    x
                

    These Speedway Mustang IFS kits for 1937-1948 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are all the special, hard-to-make brackets and mounts you will need to complete the installation, plus illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1948 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers

  • Heidts Mustang II Crossmember for 1949-54 Chevy Car Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1949-54 Chevy Car Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Basic Disc Brake Kit, 1955-64 Chevy Fullsize Car, Stock Spindle
    Basic Disc Brake Kit, 1955-64 Chevy Fullsize Car, Stock Spindle
    x
                

    This kit allows you to put front disc brakes on your 1955-64 fullsize Chevy passenger car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series) OEM spindles (will NOT work with dropped spindles). It will work with 14" wheels intended for disc brakes, as well as most 15" (or larger) wheels. Works with 5 on 4-3/4 inch bolt patterns.

    Use with our 11" rotor 910-65390 and metric caliper 910-31045 (see Notes). This kit will increase track width 3/8" per side or or 3/4" total when installed.

    Kit Includes:

    • Brake brackets
    • Hardware
    916-31931 Instructions (PDF)
  • 1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    x
                

    When you put modern front disc brakes on your '55-'57 Chevy car, you should update the master cylinder as well. The stock '55-'57 drum brake master cylinder does not have the capacity to supply the proper amount of pressure for front disc brakes. This simple bolt-on power brake assembly will ensure your brakes are operating at peak performance.

    • Kit contains a 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlets, 8" dual diaphragm booster, and a disc/drum combination valve (provides proportioning and metering).
    • Also includes line to connect the prop/metering block to the master cylinder and the necessary hardware to mount the booster to your original '55-'57 Chevy brake pedal.
    • Measures 14-1/4" from firewall bracket to end of master cylinder.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Chrome
    Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Chrome
    x
                

    These fender well headers provide the ultimate performance for 396-502 big block Chevy V8s in 1955-57 Chevy car applications. They kick up over the frame rail and exit just at the bottom of the cowl, which makes them perfect for Gasser-style rods and drag cars. Plus, these headers feature long primary tubes that help produce more horsepower and torque than shorter, more compact headers.

    These headers are not for the faint of heart since you must cut the inner fender panels to make them fit, and tire clearance can be a problem on some applications. They may require smaller front tires to avoid contact. The stock emergency brake rod must also be altered. Can be used with most oil filter systems or transmission and starter combinations. The headers are designed to be used with engines in the stock location, not lowered as many kits do, so all '55-'57 cars should check motor mount positioning before ordering.

    • Header flange has 1-13/16” x 1-13/16" port size
    • Will require fender well cutting or alteration
    • 2" primary tube O.D.
    • 32" primary tube length
    • 3-1/2" collector tube O.D.
    • Chrome plated finish
    • Includes bolts and gaskets

    Header Dimensions (GIF)

    Note: This header actually goes upward from the head instead of down before dropping

  • Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    x
                

    These Speedway Mustang IFS kits for 1949-1954 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1949-1954 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a

  • Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    Kit installs 11" diameter GM mid-size disc brakes on your machined 1949-54 Chevy car spindles, 1941-59 Chevy pickup spindles, or Speedway '49-'54 Chevy-style spindles. Stock spindles will require minor machine work.

    NOTE: This kit will not work with stock '49-'54 Chevy steering arms installed on stock '49-'54 Chevy car front ends. Kit is designed for street rod dropped tube front axles using 1949-54 Chevy-style spindles and flat plate steering arms. Kit will not work with "straight" tube axles as the caliper will contact the axle tube before sufficient turning radius is completed.

    910-31953 Instructions (PDF)

  • Stock Small Block Chevy Rocker Arm Pivot Balls
    Stock Small Block Chevy Rocker Arm Pivot Balls
    x
                Stock style small block Chevy rocker arm balls are heat treated and grooved for improved oiling. For stock 3/8" diameter studs. Set of 16.
            
  • Stock Small Block Chevy Rocker Arm Nuts
    Stock Small Block Chevy Rocker Arm Nuts
    x
                Stock style small block Chevy rocker arm nuts for stock style 3/8"-24 NF studs. Set of 16.
            
  • Ron Davis Aluminum Chevy Radiator
    Ron Davis Aluminum Chevy Radiator
    x
                

    High quality, tough aluminum radiators from Ron Davis. All models are pressure tested. GM position/style outlets. Two-core with 1" tubes; more efficient than 4 core with 1/2" tubes.

    19" tall, 2-1/4" thick.  Available widths are 22", 26", 28" or 31". (Width measurement does include tank.)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    Kit installs 11" diameter GM mid-size disc brakes on your machined 1949-54 Chevy car spindles, 1941-59 Chevy pickup spindles, or Speedway '49-'54 Chevy-style spindles. Stock spindles will require minor machine work.

    NOTE: This kit will not work with stock '49-'54 Chevy steering arms installed on stock '49-'54 Chevy car front ends. Kit is designed for street rod dropped tube front axles using 1949-54 Chevy-style spindles and flat plate steering arms. Kit will not work with "straight" tube axles as the caliper will contact the axle tube before sufficient turning radius is completed.

    910-31954 Instructions (PDF)

  • 1955-1957 Small Block Chevy Chassis Headers, Plain
    1955-1957 Small Block Chevy Chassis Headers, Plain
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21". 

      Dimension Chart (GIF)

  • 1955-1957 Small Block Chevy Chassis Headers, AHC Coated
    1955-1957 Small Block Chevy Chassis Headers, AHC Coated
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors. These ceramic coated headers provide superior performance and durability.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21". 

      Dimension Chart (GIF)

    NOTE:  These headers do not fit angle-plug heads. They do work with a "605"steering box.  They work with most an

  • 1955-79 Stock Raw Steel Small Block Chevy Oil Pan
    1955-79 Stock Raw Steel Small Block Chevy Oil Pan
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    Now also available with inspection plug!

  • 1955-1957 Small Block Chevy Chassis Headers, Chrome
    1955-1957 Small Block Chevy Chassis Headers, Chrome
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21". 

      Dimension Chart (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust c

  • Edelbrock 2101 Performer 1955-86 Small Block Chevy Intake Manifold
    Edelbrock 2101 Performer 1955-86 Small Block Chevy Intake Manifold
    x
                

    Edelbrock's famous Performer manifold is designed for street 1955-86 small block Chevys. This manifold is a stock replacement/street legal part for 302/327/350 V8s with OEM 4 bbl. or Edelbrock Performer Series carbs. Will also work on 1966-72 (1973 non-California) cars, 1966-83 trucks and Suburbans; except stock equipped EGR.

    Performers accept late-model choke, waterneck, air-conditioning, alternator and H.E.I. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads. 

    Made in the U.S.A. 

    325-2101 Instructions (PDF)

    NOTE: This intake does not work with kickdown kit 491-2350U.

  • 1955-1957 Small Block Chevy Chassis Headers, Stainless
    1955-1957 Small Block Chevy Chassis Headers, Stainless
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21".

    Dimension Chart (GIF)

    NOTE: Stainless header tubing when exposed to exhaust temperature will cause the finish to change color which will vary with the exhaust temperature. Please note that the finish of the header when the engine i

  • Heidt's Mustang II Crossmember for 1934-36 Chevy Master Frame, Weld-On Kit
    Heidt's Mustang II Crossmember for 1934-36 Chevy Master Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    x
                

    Mr.Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

    • Quality chrome finish
    • Fits 265-400 SBC engines
    • Mounts stock OEM pump
    • Includes gasket
  • Heat Treated Valve Locks, 11/32 Inch, Set of 32
    Heat Treated Valve Locks, 11/32 Inch, Set of 32
    x
                

    These race locks are designed for stock or performance engines using 7 degree valve locks. They are manufactured from machined steel and offer excellent valve spring location, so it is not necessary to change to a 10 degree retainer. Whether you're rebuilding a stock engine or changing to valve springs that have more seat pressure, these valve locks will provide the reliability that you've been looking for.

    Heat Treated Valve Locks

    • High Quality & Heat Treated
    • High strength, premium, heavy duty
    • Machined from high quality steel
    • Valve stem diameter: 0.342 in.
    • 1-groove
    • 11/32", 7 Degree
    • Set of 32
  • Tight-Fit Small Block Chevy Block Hugger Headers, Black
    Tight-Fit Small Block Chevy Block Hugger Headers, Black
    x
                

    These small block Chevy tight-fit headers are the most universal steel tube shorty headers available. They even fit difficult applications where space is limited. The block hugger headers are a favorite for street rods, as well as many 1950's and 1960's cars and vintage trucks.

    • Most tight fit header applications require the use of Accel shorty spark plugs
    • Compact design
    • Will NOT fit angle plug heads
    • Includes reducers, gaskets and bolts
    • 1-5/8" primary tubes
    • 2-1/2" collector
    • Head Flange Thickness:  0.35"

    Header Dimensions (JPG)

  • 1955-57 Big Block Chevy 396-502 Chassis Headers, Plain Steel
    1955-57 Big Block Chevy 396-502 Chassis Headers, Plain Steel
    x
                

    Classic Chevy owners will love these 396-502 big block V8 chassis headers for 1955-1957 cars. They have 34"-36" primary tubes for lots of power, but they're tucked close to the body for maximum ground clearance. Requires aftermarket side engine mounts and a rear trans crossmember (rather than stock bellhousing mounts).

    • Mid-length design offers maximum ground clearance, even if car is lowered 4"
    • Works with automatic transmissions only
    • Designed to work with stock steering or 605 power steering box
    • Original bellhousing frame mounts must be removed
    • Will NOT work if engine is set forward more than 3/4" for firewall/HEI distributor clearance
    • Will NOT fit tall-deck (truck) blocks
    • Header Dimensions (GIF)

    Note: These headers will not work with manual transmissions due to clutch linkage issues.

  • 1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1937-1939 Chevy passenger car brake system. The 1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31939 Instructions (PDF)

  • 1963-64 Chevy Car Manual Style Pitman Arm
    1963-64 Chevy Car Manual Style Pitman Arm
    x
                

    We stock these hard to find, quality replacement pitman arms.  They're built to factory specs, so you can be assured that you're getting a quality product that will help to keep your vehicle's steering as smooth as it was when it rolled off of the assembly line.

    Manual Style Pitman Arm

    • 1963-64 Chevy

    Note: This pitman arm is specific to the 63-64 Chevy cars and has one end with attached tie rod end and the other end has four master splines and taper from 1.070 to 1.106 and will NOT work on our 800 series box and others with a larger output shaft.

  • 1961-66 Chevy Car Idler Arm
    $49.99
    1961-66 Chevy Car Idler Arm
    x
                

    We stock these hard to find components.  These replacement stock idler arms for 1961-66 Chevy cars are just like the originals.  They will improve overall vehicle handling and increase the life of other steering and suspension components. These idler arms are manufactured to meet or exceed OEM.

    • Replacement stock OEM
    • 1961-66 Chevy passenger cars
    • Improve overall vehicle handling
    • Increase life of other components
  • Heidts CX102  1937-39 Chevy Frame Mustang II Crossmember, Weld-On Kit
    Heidts CX102 1937-39 Chevy Frame Mustang II Crossmember, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Stock Small Block Chevy Steel Rocker Arms, 1.5:1
    Stock Small Block Chevy Steel Rocker Arms, 1.5:1
    x
                Stock style steel rocker arms for small block Chevy. Balls and nuts not included. Set of 16.
            
  • 1940-1948 Chevy Car Master Cylinder & Frame Rail Mount
    1940-1948 Chevy Car Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1940-1948 Chevy passenger car brake system. The 1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31948 Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Classic Instruments NO63GS G-Stock Gauge Cluster Set, 63-65 Chevy Nova
    Classic Instruments NO63GS G-Stock Gauge Cluster Set, 63-65 Chevy Nova
    x
                Classic Instruments '63-'65 Nova Package gauge sets  add a cluster of modern precision to your dash. Classic used their  simple goal of perfection to design this upgraded Nova gauge package to  retain the simple and pleasing looks of your first-generation Chevy  II/Nova. The set features electronic programmable speedometer, a tach,  and a quad cluster programmed for stock fuel sender, water temperature,  oil pressure, and volt gauges. Integrated turn signals, halo high-beam  indicators, pulse signal generators, and oval shaped lenses are included  to mount into your stock Nova bezel. Straightforward, simple, and made  in America, Classic Instruments '63-'65 Nova Package gauge sets are the  perfect choice for your classic car. 
    • Black & Green "G-Stock" face design
    • For 63-65 Chevy II Nova
    • Set includes speedo, tach, quad, pre assemblied bracketry, pre wired, t/s, high beam indicators built in
    • Standard GM sender pack included
    • Fuel level gauge pre-programmed 0-30 ohm to allow stock fuel tank sender to be used
    • No fuel sender included
    • Outer chrome face bezel- and metal defuser plate not included / must reuse original or purchase reproduction
Goto Previous PagePrevious Page
1 2 3 4 5 ... 19