Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"steering rack hose" Page 1 of 1

  • Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    x
                

    Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts a 1982-1988 T-Bird/Cougar rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.

    The pressure line in this kit has an inverted flare fitting at the pump end along with a 14mm O-ring fitting on the rack end. It also comes with an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pumps 91032922-GM or 910-32908.

    Kit includes:

    • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
    • The fittings that go into the 1982-1988 T-bird rack which are 14mm O-ring (high pressure) and 16mm O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.

     

    910-32535 Instructions (PDF)

    91032535 CPP Instructions (PDF) 

  • Billet Specialties 77900 Power Steering Hose Kit for Remote Reservoir
    Billet Specialties 77900 Power Steering Hose Kit for Remote Reservoir
    x
                

    Premium power steering hose kit by Billet Specialties. Comes with quality Russell Performance adapters for most common pumps, boxes, and racks. Designed for use with Tru Trac systems with remote reservoir only.

    Applications:

    • '65-'78 GM 800 steering gear box (Metric & SAE)
    • '74-'77 Ford Mustang II rack & pinion
    • CPP GM 500 steering box
    • GM Metric rack & pinion
    • Flaming River rack & pinion
    • Dodge Omni rack & pinion

    910-13260 Instructions (PDF)

  • Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    x
                

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    • (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
    • (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
    • Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18

    617-4835 Instructions (PDF) 

  • Mustang II-GM Pump Power Steering Hose Kits
    Mustang II-GM Pump Power Steering Hose Kits
    x
                It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Our Mustang II/GM pump power steering hose assemblies are an inexpensive alternative to  the more costly stainless steel braided hose kits. The return hose included in this kit will  normally need to be cut to length.

    This has an adapter to allow it to work with both metric O-ring and standard inverted flare threads on the power steering pump fitting.

    This will work with the 1974-78 Mustang II power rack and pinion in conjunction with the suggested power steering pumps 910-32922-FORD and 910-32908-BLK. When using an early GM pump with Mustang II rack, you will also need flow reducer valve 910-32918. This valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures problems of twitchy steering when these components are used together.
  • Mustang II Power Steering Flow Valve for GM Pump, 2 GPM
    Mustang II Power Steering Flow Valve for GM Pump, 2 GPM
    x
                

    It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Most who have tried it have found that the steering was twitchy or that it easily darts. This valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures the problem. For applications using the O-ring style power steering hoses. Installs in the back side of the pump as shown in the extra photos.

    If converting pump from modern 16mm o-ring to traditional 5/8" inverted flare style hoses, order (1) Adapter Insert 910-32921. 

    910-32918 Instructions (PDF)

  • Billet Specialties 77901 Power Steering Adapter Kit
    Billet Specialties 77901 Power Steering Adapter Kit
    x
                

    This adapter kit expands the available applications of our power steering hose kit to cover most power steering rack & pinion and steering box set-ups.  Fittings in this kit are 1/2"-20, 9/16"-18, 5/8"-18, and 11/16"-18 and all go to AN6.

    Applications:

    • ‘77-’78 Mustang II rack & pinion
    • Maval Mfg. rack & pinion
    • Saginaw 600 steering gear box

     

  • -6 AN O-Ring Fittings for 1982-88 T-Bird Power Rack & Pinion
    -6 AN O-Ring Fittings for 1982-88 T-Bird Power Rack & Pinion
    x
                These fittings are for our 910-34340-POW '82-'88 Thunderbird power steering rack only. Pressure fitting is 14mm O-ring to -6AN. Return fitting is 16mm O-ring to -6 AN.
            
  • Remote Reservoir Power Steering Pumps for GM & T-Bird
    Remote Reservoir Power Steering Pumps for GM & T-Bird
    x
                

    This high flow style remote reservoir power steering pump can be used with GM power steering or the 1982-1988 T-bird power rack and pinion. (Must be revalved if used with Mustang II rack and pinion or Ford power steering).

    • Available in black or chrome
    • Compact size
    • Same as GM Type II TC pumps
    • For use with remote reservoir
    • Pulley installation kit included
    • Pulley NOT included (use pulley 91032909)
  • Aluminum Power Steering Pumps w/ Reservoir
    Aluminum Power Steering Pumps w/ Reservoir
    x
                

    We offer these brand new lightweight aluminum power steering pumps with a reservoir. Available in either Ford (low flow) or GM (high flow) settings.

    • Ford - low flow for Mustang II power rack & pinion and Ford power steering
    • GM - high flow for T-Bird power rack & pinion and GM power steering
    GM:
        * AN 6 pressure outlet
        * AN 6 return inlet
    Ford:
        * 16mm 1.5 pressure outlet
        * Hose barb return inlet

    Use this Polished V-Belt Pulley sold separately.

  • 1958-64 Chevy Power Rack and Pinion
    1958-64 Chevy Power Rack and Pinion
    x
                If you want to make your 1958-64 drive like a new car you should consider going to this power rack and pinion set-up. If your existing steering is hot, it may be cheaper to go this route also. It includes the rack, mounting hardware, pump and brackets, steering hoses and hoses. Choose Small Block or Big Block Chevy. Ships in two boxes.
            
  • Sweet Mfg. 005-92343-235 Power Rack and Pinion, 3-3/4 Inch, .235 Servo
    Sweet Mfg. 005-92343-235 Power Rack and Pinion, 3-3/4 Inch, .235 Servo
    x
                

    These power rack & pinions fit the majority of Rayburn, Mastersbilt, Barry Wright, Rocket (blue), Victory Circle and Warrior chassis and are 18-1/4".

    Rack speed is measured in inches per turn.  If you turn the pinion (1) time, the rack shaft will move between 1-3/4" (slow) and 3-1/4" (fast).  That number is stamped on the front of the housing next to the greases fitting.

     

     

     

  • Power Steering Fitting, AN6 to 5/8 Inch or 16mm-1.5 O-Ring
    Power Steering Fitting, AN6 to 5/8 Inch or 16mm-1.5 O-Ring
    x
                These steel fittings have a straight thread with o-ring on one side and the common AN6 on the other. Common to Ford rack and pinion and others.
            
  • Gotta Show 131110 Power Steering Line Kit
    Gotta Show 131110 Power Steering Line Kit
    x
                This braided stainless steel line kit gives you the necessary line linking the rack to the remote reservoir canister. Line has an AN 6 female fitting on the end to work with hose kits 617-4835 and 617-4837.
            
  • Garage Sale - PS Hoses 82-88 T-bird
    $89.99
    $129.99
    Garage Sale
    Garage Sale - PS Hoses 82-88 T-bird
    x
                

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    This is Garage Sale priced because O-rings and fittings are not included, hoses and banjo bolt only.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  
  • Garage Sale - GM Power Steering Pump w/Reservior
    Garage Sale
    Garage Sale - GM Power Steering Pump w/Reservior
    x
                We offer this Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in powder coated black or chrome. Hoses available from local parts stores.

    Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included. Use bracket available below.

    Pulleys available separately. AN6 fittings shown for racing applications.

     

    This item is garage sale priced because it has been installed.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 1999-2004 Mustang GT Rack And Pinion
    Garage Sale
    Garage Sale - 1999-2004 Mustang GT Rack And Pinion
    x
                

    This rack and pinion unit is engineered to be better than your vehicle's original equipment. Original design flaws are corrected and only the latest technology and top quality materials are used to in their construction. The result is a replacement steering rack that will fit like the original and perform even better.

    • Every rack is checked and straightened, virtually eliminating abnormal piston and seal wear
    • New high-carbon steel sleeves added to each rack and triple-bonded to the housing
    • Computer-tested for proper flow, pressure, and performance
    Additional Features & Benefits:
    • 100% new o-rings and lip seals. - Ensures no leaking and quality performance.
    • All new Teflon rings are added to the spool valve on the rack donut. - Restores internal sealing of the rack & pinion.
    • Racks are micro-finished to OE specifications. - The proper surface texture will prevent leaking between chambers and extend unit life.

    This rack is garage sale priced because it is different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - Mustang II Power Rack And Pinion
    Garage Sale
    Garage Sale - Mustang II Power Rack And Pinion
    x
                Please view the product's page for more information
            
  • Garage Sale - Mustang II Power Rack And Pinion
    Garage Sale
    Garage Sale - Mustang II Power Rack And Pinion
    x
                

    This steering rack is garage sale priced because one of the lines was crushed in shipping.  

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    91034340 CPP Instructions (PDF)