Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"steel steering heims" Page 1 of 9

  • Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                

    These tie rod/drag link kits are pre-cut and tapped lengths of 7/8" O.D. tubing available in multiple lengths. Each kit comes complete with 5/8" heim joint rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the heim rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/4" shorter to 1/2" longer.

    Normally used with '49-'54 Chevy style spindles and flat steel steering arms. Can be used with stock type Ford arms if drilled out to 5/8".

    Measuring Tie Rod or Drag Links (GIF) 

    Flat Steering Arm Illustration (GIF)

    Note: Always use anti-seize to prevent galling the treads during final installation. 

  • Chrome Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Chrome Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                Please view the product's page for more information
            
  • Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    x
                Please view the product's page for more information
            
  • Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
    Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
    x
                3/4" heim for steering shaft.  Has .757 ball hole. Slides right over standard 3/4" steering shaft. 3/4" NF right hand threads. Jam nut sold separately.


  • Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                Please view the product's page for more information
            
  • Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    x
                

    These unpolished stainless steel tie rod/drag link kits are pre-cut and tapped lengths of 7/8" O.D. tubing available in multiple lengths. Each kit comes complete with 5/8" heim joint rod ends and jam nuts.Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Specify desired length in comments section of shopping cart. No returns/exchange on custom length links.Select your length based on the center-to-center of the heim rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/4" shorter to 1/2" longer.

    Normally used with '49-'54 Chevy style spindles and flat steel steering arms. Can be used with stock type Ford arms if drilled out to 5/8".

    Measuring Tie Rod or Drag Links (GIF) 

    Flat Steering Arm Illustration (GIF)

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die o

  • 1937-48 Ford Steering Arms, 3-3/4 Inch Drop
    1937-48 Ford Steering Arms, 3-3/4 Inch Drop
    x
                

    These forged steel steering arms will attach to all 1937-48 Ford spindles but their greater drop, 3-3/4" from spindle mount holes means they work best on 1935-48 Ford cars (with spring-over front axle). Clears most radius rods and wishbones. These steering arms accept 11/16" Ford 7 degree "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.

    Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

    Steering Arm Ends Guide (GIF)

    Cross Steering Guide (GIF)

  • 1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    x
                

    These 1-3/4" drop forged steel steering arms are popular on Model T - 1934 Fords with 4" dropped axles and four-bar or hairpin radius rod suspensions. Will attach to '37-'48 Ford spindles and accept 11/16" Ford "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.

    Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

     Steering Arm Ends Guide (GIF)

     Cross Steering Guide (GIF)

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Standard Steel Heim Joint Rod Ends, 5/8-18 RH Male
    Standard Steel Heim Joint Rod Ends, 5/8-18 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 1/2 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 1/2 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Heim Sizes Chart (GIF)

  • 2 Inch Drop Ford Upper Steering Arm
    2 Inch Drop Ford Upper Steering Arm
    x
                

    This 2" drop steel steering arm fits '37-'48 Ford style spindles. It is tapered to accept an 11/16" tie rod end. Designed for use on upper spindle mount in "traditional steering" set-ups using a reversed Corvair, '48-'56 Ford pickup, or '68-'73 Mustang steering box.

    Parallel Steering Set-Up Guide (GIF)

  • Standard Steel Heim Joint Rod Ends, 5/8-18 LH Male
    Standard Steel Heim Joint Rod Ends, 5/8-18 LH Male
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Unisteer 8050310 Steering U-Joint-1 Inch Double D to 3/4 Inch Double D
    Unisteer 8050310 Steering U-Joint-1 Inch Double D to 3/4 Inch Double D
    x
                

    These polished stainless steel U-joints look great and use a pinch bolt on each end for easy installation.

    This is a size that is used on some large GM steering columns. This specific steering universal joint uses a pinch bolt fastener on the 3/4"DD side and a set screw on the 1"DD side, due to the large size

    Steering U-Joints and Couplers Application Chart (GIF)

    Steering Box/Rack/Spline Chart (Link)

    Spline Size (Link)

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

    Fits IDIDIT/Flaming River 1" Double D

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard"  rod ends. They have close tolerance and have a 3 piece medium duty rod  end. Carbon steel body, 5210 precision ground ball and feature a Teflon  Kevlar race. Self lubrication teflon liner to seal out dirt and debris.  Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

     

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 5/8 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 5/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Heim Sizes Chart (GIF)

  • Standard Steel Heim Joint Rod Ends, 1/2-20 RH Male
    Standard Steel Heim Joint Rod Ends, 1/2-20 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Standard Steel Heim Joint Rod Ends, 3/8-24 RH Male
    Standard Steel Heim Joint Rod Ends, 3/8-24 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Standard Steel Heim Joint Rod Ends, 3/4-16 RH Male
    Standard Steel Heim Joint Rod Ends, 3/4-16 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 3/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Standard Steel Heim Joint Rod Ends, 1/2-20 LH Male
    Standard Steel Heim Joint Rod Ends, 1/2-20 LH Male
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 5/8 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 5/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 1/2 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 1/2 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Steel Cone Spacers for Rod Ends, 1/2 Inch
    Steel Cone Spacers for Rod Ends, 1/2 Inch
    x
                These steel tapered spacers give you more travel when using rod ends on your  steering linkage or suspension. Includes 8 spacers per package.
            
  • Steel Cone Spacers for Rod Ends, 5/8 Inch
    Steel Cone Spacers for Rod Ends, 5/8 Inch
    x
                These steel tapered spacers give you more travel when using rod ends on your steering linkage or suspension. Includes 8 spacers per package.
            
  • Vega Pitman Arm - Tapered for Tie Rod
    From: $49.99
    Product Rating: 5.00 Stars
    Vega Pitman Arm - Tapered for Tie Rod
    x
                These all new reproduction pitman arms feature a non-offset design, a double tapered "Ford" tie rod end hole (lets you attach the drag link on the top or on the bottom), and comes in gleaming stainless steel or plain steel. Perfect for a repro Vega steering box. 
            
  • AFCO 10401 Greasable Steering Heim Rod End, 5/8-18 LH Male
    AFCO 10401 Greasable Steering Heim Rod End, 5/8-18 LH Male
    x
                
    • Made for steering use
    • 5/8" bore and 5/8" shank
    • Heavy duty 3/4" large body rod end w/ grease zerk
    • Extra-heavy duty and won't loosen up
  • AFCO 10402 Greasable Steering Heim Rod End, 5/8-18 RH Male
    AFCO 10402 Greasable Steering Heim Rod End, 5/8-18 RH Male
    x
                
    • Made for steering use
    • 5/8" bore and 5/8" shank
    • Heavy duty 3/4" large body rod end w/ grease zerk
    • Extra-heavy duty and won't loosen up
  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Precision Carbon Steel RH Female Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel RH Female Heim Joint Rod Ends, 3/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Plain Finish Cross Steering Tie Rod End, 11/16-18 LH Threads
    Plain Finish Cross Steering Tie Rod End, 11/16-18 LH Threads
    x
                Cross steering means the drag link reaches across the car and attaches to the passenger-side steering arm. If that steering arm has only one hole, you'll need to build the tie rod with this tie rod end on the RH side. Then the drag link attaches to the eyelet (which is tapered 1/2 way from both sides.) 
    • Not for use with flat steering arms
    • Use only with Ford type steering arms with a tapered hole
    • Not normally used with Chevy spindles

    Note: When using the cross steering end, the tube length will need to be 6" shorter than the eye-to-eye length. Example: A 46" kit will need 40" tube length.

  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Standard Steel Heim Joint Rod Ends, 3/8-24 RH Female
    Standard Steel Heim Joint Rod Ends, 3/8-24 RH Female
    x
                

    Standard rod ends are for general purpose applications and are a 2-piece design with a low carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Standard Steel Heim Joint Rod Ends, 3/8-24 LH Male
    Standard Steel Heim Joint Rod Ends, 3/8-24 LH Male
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/4 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/4 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Heim Sizes Chart (GIF)

  • QA1 EXML7-8 Precision Steel Heim Rod Ends, 1/2-20 LH Male, 7/16 Hole
    QA1 EXML7-8 Precision Steel Heim Rod Ends, 1/2-20 LH Male, 7/16 Hole
    x
                

    Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    Assembly Tip:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

     

  • Precision Carbon Steel RH Female Heim Joint Rod Ends, 1/4 Inch
    Precision Carbon Steel RH Female Heim Joint Rod Ends, 1/4 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Precision Carbon Steel RH Female Heim Joint Rod Ends, 3/16 Inch
    Precision Carbon Steel RH Female Heim Joint Rod Ends, 3/16 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Precision Carbon Steel RH Female Heim Joint Rod Ends, 5/8 Inch
    Precision Carbon Steel RH Female Heim Joint Rod Ends, 5/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 9