Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"steel rod ends" Page 1 of 25

  • Speedway Stainless Steel 4-Bar Rod Ends, 5/8-18 RH Thread
    Speedway Stainless Steel 4-Bar Rod Ends, 5/8-18 RH Thread
    x
                

    Don't settle for a weak 4-bar end made out of a piece of tubing welded to a bolt. These Speedway rod ends are made from fully polished investment cast stainless steel for superior strength and durability. All rod ends feature a 5/8"-18 RH threaded shank and the nylon bushing has a steel sleeve that accepts a 1/2" bolt.

    Rod ends come in three different configurations:

    • Straight Shank
      • Mounting eye is perpendicular to threaded shank
      • 5/8"-18 RH threads
      • Center of mounting eye to end of threads is 2-7/8"
    • 7° Shank
      • Mounting eye is offset 7° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 7° angle)
      • 5/8"-18 RH threads
      • Center of mounting eye to end of threads on short side is 2-13/16"
      • Center of mounting eye to end of threads on long side is 2-15/16"
    • 11° Shank
      • Mounting eye is offset 11° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 11° angle)
      • 5/8"-18 RH threads

    Choose from straight, 7° or 11° angled shanks.
     

  • Speedway Forged Steel 4-Bar Rod Ends, 5/8-18 RH Thread
    Speedway Forged Steel 4-Bar Rod Ends, 5/8-18 RH Thread
    x
                

    Don't settle for a weak 4-bar end made out of a piece of tubing welded to a bolt. These Speedway rod ends are made from forged steel for superior strength and durability. All rod ends feature a 5/8"-18 RH threaded shank and the nylon bushing has a steel sleeve that accepts a 1/2" bolt. Rod ends come in three different configurations:

    Choose from straight, 7° or 11° angled shanks.

    • Straight Shank
      • Mounting eye is perpendicular to threaded shank
      • 5/8"-18 RH threads 
      • Center of mounting eye to end of threads is 2-7/8"
    • 7° Shank
      • Mounting eye is offset 7° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 7° angle)
      • 5/8"-18 RH threads 
      • Center of mounting eye to end of threads on short side is 2-13/16"
      • Center of mounting eye to end of threads on long side is 2-15/16"
    • 11° Shank
      • Mounting eye is offset 11° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 11° angle)
      • 5/8"-18 RH threads 
  • Standard Steel Heim Joint Rod Ends, 5/8-18 LH Male
    Standard Steel Heim Joint Rod Ends, 5/8-18 LH Male
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Standard Steel Heim Joint Rod Ends, 5/8-18 RH Male
    Standard Steel Heim Joint Rod Ends, 5/8-18 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Steel Heim Rod End Reducer, 5/8 Inch Bore to 1/2 Bolt
    Steel Heim Rod End Reducer, 5/8 Inch Bore to 1/2 Bolt
    x
                
    • Used to reduce rod end bore
    • Reducers fit entirely in the rod end ball
  • Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
    Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
    x
                3/4" heim for steering shaft.  Has .757 ball hole. Slides right over standard 3/4" steering shaft. 3/4" NF right hand threads. Jam nut sold separately.


  • Steel Jam Nuts, 5/8 Inch-18 NF Fine Thread, Pack/6
    Steel Jam Nuts, 5/8 Inch-18 NF Fine Thread, Pack/6
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 5/8 Inch-18 NF Fine Thread
    • Sold in bags of six nuts.
    • Choose left or right thread.
  • Steel Jam Nuts, 3/4 Inch-16 NF Fine Thread, Pack/6
    Steel Jam Nuts, 3/4 Inch-16 NF Fine Thread, Pack/6
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 3/4 Inch-16 NF Fine Thread
    • Sold in bags of six nuts.
    • Choose left or right thread.
  • Plain Steel Sleeves for 5/8 Inch Rod Ends
    Plain Steel Sleeves for 5/8 Inch Rod Ends
    x
                

    If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.

    To order:

    1. Use guide below to measure your finished length.
    2. The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
    3. All sleeves will have internal RH thread in one end and LH thread in the other.

    Measuring Guide for Tie Rod/Drag Link (GIF)

  • Standard Steel Heim Joint Rod Ends, 1/2-20 LH Male
    Standard Steel Heim Joint Rod Ends, 1/2-20 LH Male
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 1/2 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 1/2 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Heim Sizes Chart (GIF)

  • Standard Steel Heim Joint Rod Ends, 1/2-20 RH Male
    Standard Steel Heim Joint Rod Ends, 1/2-20 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Standard Steel Heim Joint Rod Ends, 3/8-24 RH Male
    Standard Steel Heim Joint Rod Ends, 3/8-24 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Standard Steel Heim Joint Rod Ends, 3/4-16 RH Male
    Standard Steel Heim Joint Rod Ends, 3/4-16 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Standard Steel Heim Joint Rod Ends, 1/4-28 RH Female
    Standard Steel Heim Joint Rod Ends, 1/4-28 RH Female
    x
                

    Standard rod ends are for general purpose applications and are a 2-piece design with a low carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, and throttle.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Four-Bar Rod End Plastic Bushing Kit for 1/2 Inch Bolt, Set of 8
    Four-Bar Rod End Plastic Bushing Kit for 1/2 Inch Bolt, Set of 8
    x
                

    These nylon bushings for 4 bar ends can be used for your custom build or as replacements for our kits. Fits rod ends with a 1.137" I.D. and rod end width of 1.050". Kit includes a set of 8 plastic bushings.

    • Bushing Eye O.D.:  1.508" @ widest point of the crown - it is not flat
    • Total Width of Bushing Assembly:  1.375" 
    • Steel Sleeve I.D.:  .500"
    • Steel Sleeve O.D.:  .750"
    • Steel Sleeve Length:  1.375"
    • Plastic
    • Set of 8
    • For four-bar ends

     

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard"  rod ends. They have close tolerance and have a 3 piece medium duty rod  end. Carbon steel body, 5210 precision ground ball and feature a Teflon  Kevlar race. Self lubrication teflon liner to seal out dirt and debris.  Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

     

  • Standard Steel Heim Joint Rod Ends, 3/8-24 LH Male
    Standard Steel Heim Joint Rod Ends, 3/8-24 LH Male
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 5/8 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 5/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Heim Sizes Chart (GIF)

  • Plain Steel Smoothie Clevis, 5/8 Inch RH Thread, 3/8 Inch Slot & Hole
    Plain Steel Smoothie Clevis, 5/8 Inch RH Thread, 3/8 Inch Slot & Hole
    x
                

    A beautiful steel clevis ideal for your hot rods' suspension! The shank features 5/8" RH fine threads. Has a 3/8" wide slot and 3/8" diameter hole.

    • Beautiful, rugged clevis ideal for hot rod suspension
    • Rounded head of 3/8" cross bolt (included) blends smoothly into overall shape
    • Shank features 5/8" RH fine threads
    • 3/8" slot
    • Measures 4 inches from end to end
    • Plain steel
  • Speedway Forged Steel 4-Bar Rod End, 5/8-18 LH Thread, Straight Shank
    Speedway Forged Steel 4-Bar Rod End, 5/8-18 LH Thread, Straight Shank
    x
                

    Don't settle for a weak 4-bar end made out of a piece of tubing welded to a bolt. These Speedway rod ends are made from forged steel for superior strength and durability. Features a 5/8"-18 LH threaded shank and the nylon bushing has a steel sleeve that accepts a 1/2" bolt.

    • Reverse, left hand threads
    • Mounting eye is perpendicular to threaded shank
    • Center of mounting eye to end of threads is 2-7/8"
       
  • Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    x
                Please view the product's page for more information
            
  • Speedway Pull Type Slave Cylinder
    Speedway Pull Type Slave Cylinder
    x
                

    Speedway pull type slave cylinder with 7/8" bore for clutch use. Works great with stock-style hydraulic throwout bearings or Ram Couplers. Has a 3/8"-24 inverted flare female inlet. Bleeder adapter and bleeder are included.

    • Ram shaft is 3/8" O.D.
    • Cylinder body is 4.09" long
    • Cylinder body is 1-7/16" O.D. at end by fittings
    • Cylinder body is 1-3/8" at opposite end of fittings

    A 5/16” heim will fit both ends of cylinder (not included). Our heim part number is 1750202.

    Note: For most multi-disc clutch set-ups we recommend the use of a smaller 3/4" bore master cylinder.

  • Chrome Steel Jam Nut, 5/8 Inch-18 RH NF Fine Thread
    Chrome Steel Jam Nut, 5/8 Inch-18 RH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium chrome steel and they're available with right hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 5/8 Inch-18 RH NF Fine Thread
    • Available in right hand thread.

    Note: Always run a tap or die over and through any chromed threaded item. Apply anti-seize liberally to both threaded surfaces before assembly to prevent galling of threads. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 3/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Standard Steel Heim Joint Rod Ends, 3/4-16 LH Male
    Standard Steel Heim Joint Rod Ends, 3/4-16 LH Male
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Steel Cone Spacers for Rod Ends, 1/2 Inch
    Steel Cone Spacers for Rod Ends, 1/2 Inch
    x
                These steel tapered spacers give you more travel when using rod ends on your  steering linkage or suspension. Includes 8 spacers per package.
            
  • Steel Cone Spacers for Rod Ends, 5/8 Inch
    Steel Cone Spacers for Rod Ends, 5/8 Inch
    x
                These steel tapered spacers give you more travel when using rod ends on your steering linkage or suspension. Includes 8 spacers per package.
            
  • Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                

    These tie rod/drag link kits are pre-cut and tapped lengths of 7/8" O.D. tubing available in multiple lengths. Each kit comes complete with 5/8" heim joint rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the heim rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/4" shorter to 1/2" longer.

    Normally used with '49-'54 Chevy style spindles and flat steel steering arms. Can be used with stock type Ford arms if drilled out to 5/8".

    Measuring Tie Rod or Drag Links (GIF) 

    Flat Steering Arm Illustration (GIF)

    Note: Always use anti-seize to prevent galling the treads during final installation. 

  • Swedged Steel Tube for 5/8 Inch Heim
    From: $9.99
    Product Rating: 4.00 Stars
    Swedged Steel Tube for 5/8 Inch Heim
    x
                These 5/8" swedged steel sleeves have a 7/8" O.D. tube, 0.065 wall, and 5/8" RH and LH fine threads. Available in 1" increments from 4" to 20". IMCA approved. Sold Each.
            
  • Standard Steel Heim Joint Rod Ends, 3/8-24 RH Female
    Standard Steel Heim Joint Rod Ends, 3/8-24 RH Female
    x
                

    Standard rod ends are for general purpose applications and are a 2-piece design with a low carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Standard Steel Heim Joint Rod Ends, 5/16-24 RH Female
    Standard Steel Heim Joint Rod Ends, 5/16-24 RH Female
    x
                

    Standard rod ends are for general purpose applications and are a 2-piece design with a low carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 5/8 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 5/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 1/2 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 1/2 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Steel Jam Nuts, 11/16 Inch-18 NF Fine Thread, Pack/6
    Steel Jam Nuts, 11/16 Inch-18 NF Fine Thread, Pack/6
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 11/16 Inch-18 NF Fine Thread
    • Sold in bags of six nuts.
    • Choose left or right thread.
  • Standard Steel Heim Joint Rod Ends, 3/16 Inch (10-32) RH Female
    Standard Steel Heim Joint Rod Ends, 3/16 Inch (10-32) RH Female
    x
                

    Standard rod ends are for general purpose applications and are a 2-piece design with a low carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Stainless Steel Tie Rod End, 11/16-18 RH
    Stainless Steel Tie Rod End, 11/16-18 RH
    x
                These tie rod ends are just like our standard Ford tie rod ends except they are made of beautifully polished stainless steel. They have 11/16"-18 thread and include hardware. Make sure to use anti-seize on the threads. 
            
  • FK Rod Ends RSML8 5/8 x 1/2 Inch Steel Male Rod End
    FK Rod Ends RSML8 5/8 x 1/2 Inch Steel Male Rod End
    x
                
    FK Rod Ends offers this three piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of low carbon steel and is heat treated, chromate treated, and zinc plated. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is low carbon steel that has been heat treated, chromate treated, and zinc plated
    • Race is alloy steel, heat treated, zinc plated, chromate treated

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (JPG)

  • FK Rod Ends RSMXL8 1/2 X 5/8 Inch Steel Heim
    FK Rod Ends RSMXL8 1/2 X 5/8 Inch Steel Heim
    x
                
    FK Rod Ends offers this three piece extra strength rod with a heavy duty shank. The ball is made of 52100 steel that is heat treated and chrome plated. The race and body are heat treated steel alloy that have been zinc plated and chromate treated.
    • 1/2" x 5/8"
    • 3 piece extra strength rod with heavy duty shank
    • Ball is made of 52100 steel, heat treated and hard chrome plated
    • Race is heat treated steel alloy, zinc plated and chromate treated
    • Body is alloy steel, heat treated, zinc plated and chromate treated

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (JPG)

  • Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25