Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"steel motor mount" Page 1 of 19

  • Chevy Steel Frame Mounts
    $29.99
    Chevy Steel Frame Mounts
    x
                

    If your race vehicle reqires rigid motor mounts, our solid steel mounts won't let you down. These frame brackets are designed to be used with our steel motor mounts 545-62515. Fits both Small Block and Big Block Chevy.

    Same as factory frame brackets from '74-'81 Camaro, '73-'88 Malibu/Monte Carlo/El Camino, '73-'79 Nova, and '76-'90 Impala/Caprice.

  • Moroso Chevy Steel Motor Mounts
    Moroso Chevy Steel Motor Mounts
    x
                

    If your race vehicle reqires rigid motor mounts, our solid steel mounts won't let you down. These engine brackets are designed to be used with our Steel Frame Mounts 545-62630. 

    • Replaces soft, OEM rubber motor mounts
    • Positive, solid mount eliminates engine rotation and torque loss
    • Prevents linkage binding
    • Fits both Small Block and Big Block Chevy

     

  • Universal Engine Mount Kits
    $99.99
    Product Rating: 4.67 Stars
    Universal Engine Mount Kits
    x
                

    Available for small block Chevy, GM LS or Ford applications.

    Each kit includes:

    • Weld on frame pads
    • Rubber bolt through cushion
    • Engine pads
    • Hardware
  • 1947-54 Chevy Pickup Motor Mounts for LS Series Engine Swap
    New
    1947-54 Chevy Pickup Motor Mounts for LS Series Engine Swap
    x
                
    These LS Series Chevy bolt-in motor mounts are designed for use with Speedway 1947-'54 Chevy Pickup Mustang II Bolt-In Crossmember # 910-44754. They will bolt right in for your new LS engine.  Kits include steel frame mounts, steel engine mounts, rubber cushion set, and all hardware.
    • Works only with crossmember (91044754)
    • For LS Series Chevy engines
    • For 1947-54 Chevy Pickups

    Includes:

    • Steel frame mounts
    • Steel engine mounts
    • Rubber cushion set
    • All hardware
  • Polished Stainless Steel Chevy Motor Mounts
    Polished Stainless Steel Chevy Motor Mounts
    x
                Our polished stainless steel motor mounts for S/B and B/B Chevy engines include polyurethane bushings and trim-to-fit 1/4" steel weld-on frame brackets. Add a touch of class to your dream car. 
            
  • Flex-a-lite Heavy Duty Steel Cooling Fan
    Flex-a-lite Heavy Duty Steel Cooling Fan
    x
                

    Heavy duty fan recommended for stock cars. Moves the maximum amount of air for the best cooling. Steel blades, non-flex design.

    Available in 15", 17", 18" or 19" diameters.

    910-1575 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Chevy Weld-In Motor Mounts
    $79.99
    Product Rating: 4.18 Stars
    Chevy Weld-In Motor Mounts
    x
                

    More often than not, we are trying to put an engine in something that no one has built bolt-in mounts for. If that's your story, we have just the deal for you! This S/B Chevy and B/B Chevy motor mount has a poly bushing in it giving you a vibration free installation.

    This mount will use replacement bushing 916-34545.

    Welding and fitting required.

  • Powermaster 9507 Flathead Ford V8 Gear Reduction Starter
    Powermaster 9507 Flathead Ford V8 Gear Reduction Starter
    x
                

    Powermaster XS Torque gear reduction starters are built using all new components and cranks out 200 ft./lbs. of torque. It bolts up like an original starter, but its gear-reduction design gives it more power to crank over high-compression engines. Fits USA-made 1932-1953 flathead Ford V8 engines using manual transmissions & steel flywheels.

    • Small, compact size provides additional clearance
    • Bolts to original mounting points
    • Can be mounted upside down for header clearance
    • 4.4:1 gear reduction ratio
    • Cranking power for up to 18:1 compression
    • Works with our steel, manual-shift flywheels

    Flathead Ford V8 Gear Reduction Starter Instructions (PDF)

  • 1947-54 Chevy Pickup Motor Mounts for Bolt-In IFS
    1947-54 Chevy Pickup Motor Mounts for Bolt-In IFS
    x
                

    Small Block Chevy bolt-in motor mounts for use with Speedway '47-'54 Chevy Pickup Mustang II Bolt-In Crossmember # 910-44754. Kit includes steel frame mounts, steel engine mounts, rubber cushion set, and all hardware.

    910-54754 Instructions (PDF)

  • Small Block Chevy Tight Fit Headers, AHC Coated
    Small Block Chevy Tight Fit Headers, AHC Coated
    x
                

    These AHC small-block Chevy tight fit headers are the most universal steel tube headers available. These performance headers fit difficult applications where space is limited. They are a favorite for street rods, as well as many 1950's and 1960's cars and vintage trucks. These ceramic coated headers provide superior performance and durability.

    Tight Tuck headers are the solution to many problems associated with engine swaps in modern street rods. Tight Tucks fit in the tightest of engine compartments and clear all stock motor mounts. Most headers are manufactured from durable 16-gauge tubing and comes complete with gaskets, header bolts and collector reducers.

    • Most tight fit header applications require the use of Accel shorty spark plugs
    • Round port
    • Compact design
    • Will NOT fit angle plug heads
    • Includes reducers, gaskets and bolts
    • Armor Hot Coat finish

    Header Dimensions (JPG)

  • Small Block Ford Crossmember Motor Mount
    Small Block Ford Crossmember Motor Mount
    x
                Universal mount allows 260-289-302-351W S/B Fords and 1970-1974 Cleveland engines with front sump oil pan to be installed into most frames up to 38" wide. Cut for frame width, then bolt or weld in.   

    Note: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Steel Rear Motor Mounts, Chevy
    Steel Rear Motor Mounts, Chevy
    x
                Two-piece steel rear motor mount for S/B or B/B Chevy and 90° V6. Replaces Howe mount.
            
  • Small Block Chevy Steel Side Engine Mount Kit
    Small Block Chevy Steel Side Engine Mount Kit
    x
                

    Use these universal small block Chevy engine mounts to fit your high-horsepower motor to the desired chassis of your choice.  They are constructed of beefy .18" thick steel for safety and performance.

    • Small Block Chevy applications
    • Universal chassis applications
    • Sturdy steel construction
    • Hardware included
  • Radiator Mounting Hardware
    From: $15.99
    Product Rating: 3.40 Stars
    Radiator Mounting Hardware
    x
                

    Mounting radiators can be a real pain, but these universal radiator mounting brackets will makes it a little easier. Brackets are designed to mount our universal aluminum crossflow radiators with a 3" thick core to a variety of applications. Don't forget to order the rubber insulator pads (sold separately).

    917-34700-STL
    This kit contains 4 steel brackets. The lower brackets measure 3-1/4" inside to inside. The upper brackets measure 2-1/2" inside to inside.

    917-34700-ALU
    This kit contains 4 aluminum brackets. 2 lower mounts brackets and 2 upper mount brackets (for weight savings). The lower brackets measure 3-1/4" inside to inside. The upper bracket measure 2-1/2" inside to inside.

    917-34700-SS
    This kit contains 4 stainless steel pieces. 2 lower mounts brackets and 2 upper mount brackets. The lower brackets measure 3-1/4" inside to inside. The upper bracket measure 2-1/2" inside to inside.

  • Lokar TD-3700FM36 Stainless Steel 700R4 Firewall Mount Trans Dipstick
    Lokar TD-3700FM36 Stainless Steel 700R4 Firewall Mount Trans Dipstick
    x
                

    Braided stainless covered tubing with billet look handle and stainless hardware. Flexible design gives added mounting versatility.

     

    You have flexibility with our Teflon-lined Flexible Braided Stainless 700R4 Transmission Dipstick. This R4 Kit comes complete with braided stainless outer housing and heat resistant E-Z to read flexible inner dipstick measuring cable. Inner cable is molded with appropriate trans fluid levels. Billet aluminum handle and billet aluminum fittings complement Lokar's Flexible Engine Dipsticks. Kit includes dipstick funnel adapter to assist in filling. Designed for "push in" style transmissions. Dipstick seals with double O-rings.  Firewall mount measures 24" in length. 

    This 700R4 dipstick kit comes complete with installation instructions.

     

  • Chevy Solid Motor Mounts
    $14.99
    Chevy Solid Motor Mounts
    x
                

    Steel mounts prevent twist during hard accelerations. Replaces stock upper mounts. Measures 1-11/16" high, 2-1/2" wide.

  • Speedway 1927 Track-T Roadster Kit
    Speedway 1927 Track-T Roadster Kit
    x
                

    With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose.  The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles.  In such a small, lightweight car they become mighty spirited performers.

    The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel.  It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts.  Headlight mounts, hood top, and aluminum hood sides are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket. 

    The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will

  • AFCO 20024 5.0L Ford Motor Mounts for Mustang K-Member
    AFCO 20024 5.0L Ford Motor Mounts for Mustang K-Member
    x
                

    5.0L Ford V8 engine motor mounts for AFCO Mustang K-Member 106-20022. Includes a pair of powdercoated steel motor mounts, polyurethane bushings and all necessary hardware.

  • AFCO 20025 4.6L Ford Mod Motor Mounts for Mustang K-Member
    AFCO 20025 4.6L Ford Mod Motor Mounts for Mustang K-Member
    x
                

    4.6L Ford Modular V8 engine motor mounts for AFCO Mustang K-Member 106-20022. Includes a pair of powdercoated steel motor mounts, polyurethane bushings and all necessary hardware.

  • Tight-Fit Stainless Steel Small Block Chevy Block Hugger Headers
    Tight-Fit Stainless Steel Small Block Chevy Block Hugger Headers
    x
                Please view the product's page for more information
            
  • 1932 Lo-Boy Roadster Frame Assembly
    1932 Lo-Boy Roadster Frame Assembly
    x
                Please view the product's page for more information
            
  • Steel Small Block Chevy Front Motor Mounts
    Steel Small Block Chevy Front Motor Mounts
    x
                Front Motor Mounts for S/B Chevy V8 or V6. 
            
  • AFCO 20026 Chevy V8 and LS Motor Mounts for Mustang K-Member
    AFCO 20026 Chevy V8 and LS Motor Mounts for Mustang K-Member
    x
                

    Chevy V8 (small block, big block and LS) motor mounts for AFCO Mustang K-Member 106-20022. Includes a pair of powdercoated steel motor mounts, polyurethane bushings and all necessary hardware.

  • 1964-1974 Big Block Chevy Long Tube Headers, Chrome
    New
    1964-1974 Big Block Chevy Long Tube Headers, Chrome
    x
                
    These chrome headers are just the ticket for you B/B Chevy guys. They feature 2" primary tubes, 3-1/2" collectors, and must be used with original big block motor mounts to fit properly. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing.

    Headers come with:

    • installation hardware
    • collector reducers
    • gaskets 
    • instructions
  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • 1955-57 Big Block Chevy 396-502 Chassis Headers, Plain Steel
    1955-57 Big Block Chevy 396-502 Chassis Headers, Plain Steel
    x
                

    Classic Chevy owners will love these 396-502 big block V8 chassis headers for 1955-1957 cars. They have 34"-36" primary tubes for lots of power, but they're tucked close to the body for maximum ground clearance. Requires aftermarket side engine mounts and a rear trans crossmember (rather than stock bellhousing mounts).

    • Mid-length design offers maximum ground clearance, even if car is lowered 4"
    • Works with automatic transmissions only
    • Designed to work with stock steering or 605 power steering box
    • Original bellhousing frame mounts must be removed
    • Will NOT work if engine is set forward more than 3/4" for firewall/HEI distributor clearance
    • Will NOT fit tall-deck (truck) blocks
    • Header Dimensions (GIF)

    Note: These headers will not work with manual transmissions due to clutch linkage issues.

  • 1955-1994 Small Block Chevy Engine Mount
    1955-1994 Small Block Chevy Engine Mount
    x
                

    Specially designed engine mount cradle to mount your 1955-1994 Chevy 265-400 small block into almost any chassis. Includes grade 5 mounting hardware. Add one of our frame mount kits and a universal bolt-through cushion kit for a professional installation.

    Engine Mounting Illustration (GIF)

    135-6023 Instructions (PDF)

  • 4.3 V6 Ceramic Coated Shorty Headers, Tight-Fit
    4.3 V6 Ceramic Coated Shorty Headers, Tight-Fit
    x
                Tight-fit headers are the solution to many  problems associated with engine swaps in modern street rods. Block hugger headers fit in the tightest of engine compartments and clear most stock motor  mounts. These shorty headers are manufactured from durable 16-gauge tubing and  come complete with gaskets, header bolts and collector reducers.
    • Tight tucks fit in the tightest of engine compartments and clear most stock motor mounts
    • Durable 16-gauge tubing
    • Comes complete with gaskets, header bolts and collector reducers; (excluding part # H8019 & H8090)
    • Metallic ceramic coating
  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Ford Weld-In Motor Mounts
    $99.99
    Product Rating: 5.00 Stars
    Ford Weld-In Motor Mounts
    x
                More often than not, we are trying to put an engine in something that no one has built bolt-in mounts for. If that's your story, we have just the deal for you! 

    These 289/302/351W S/B Ford motor mounts have a rubber bushing in them giving you a vibration free installation. Welding and fitting required.

  • Ford 351M-400 Motor Mounts
    $54.99
    Product Rating: 3.00 Stars
    Ford 351M-400 Motor Mounts
    x
                Mounts a 351M-400 Ford V8 into almost any frame up to 38" wide. Uses heavy 1-3/4" O.D. mild steel tubing. Black powder coated.  17" center to center mount tubes for the engine motor mounts.


    NOTE: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • S/B, B/B or 90 Degree V6 Chevy Crossmember Mount
    S/B, B/B or 90 Degree V6 Chevy Crossmember Mount
    x
                

    Mount a Chevy engine in almost any frame up to 39" wide. Heavy wall 1-3/4" tubing, MIG welded. Comes with ends for bolt-in or weld-in applications.

    • Maximum working width: 39"
    • Minimum working width: 21"
    • 5.50" center drop

    Use with 1964-1967 Chevy-style mounts 91018012 (rubber) or 91018015 (polyurethane).

  • Professional Products 70026 Powerjection III Fuel Injection System
    Professional Products 70026 Powerjection III Fuel Injection System
    x
                

    This complete stand alone plain electronic fuel injection system supports up to 500 horsepower and is by far the simplest and cleanest aftermarket EFI system available. It's also the easiest to install and tune. The "Adaptive Learning" feature eliminates the necessity for laptop programming and tuning, except on the most radical engines. By "cleanest", we mean it has minimal wiring showing, so for those street rod, street machine, and custom car enthusiasts who object to other EFI systems because of all the engine clutter with wires running everywhere, this is the system they have been waiting for. 

    It utilizes a wideband O2 sensor, a feature missing from many competitive units. It also has a 2.5 BAR MAP sensor which means you can run up to 20 PSI of boost if you have a supercharger or turbocharger. The fuel pump comes with a combination heat sink and mounting bracket. The EMS (engine management system) mounts directly on the throttle body eliminating a major portion of the wiring required. This means you do not have to cut a hole into the firewall. Additionally the MAP sensor is packaged into the throttle body which means one less component cluttering up your firewall and no vacuum hose needed to run from the firewall to the manifold. 

    Click HERE to see what is all included! (Link)

  • Hooker Headers 12621HKR LS Swap Engine Mount Adapter 1.25 In-Clamshell
    Hooker Headers 12621HKR LS Swap Engine Mount Adapter 1.25 In-Clamshell
    x
                

    Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount.

    • Moves engine forward 1.25" and up 1/2" from original early style V8 position
    • Designed for applications that use the clamshell type mount such as a G–body
    • Constructed of sturdy 3/8” thick hot rolled steel
    • Designed for lightweight, rigidity and a clean appearance
    • Precision machined for perfect alignment
    • Zinc plated for durability and corrosion resistance
    • Come complete with counter sink machine screws and instructions
    • Work with all S/B Chevy clamshell mounts & frame towers
    • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

    LS Swap Engine Mount Adapter Instructions (PDF)

  • Steel Tank Mounting Brackets for Spun Aluminum Fuel Tanks
    Steel Tank Mounting Brackets for Spun Aluminum Fuel Tanks
    x
                

    These powder coated steel band clamps feature two tabs for attachment (per clamp) to a flat surface. Use them with 8" diameter tanks. These tank mounting straps work best with our spun aluminum gas tanks, (91076401 and 91076402).

    • Powder coated
    • Steel
    • Two tabs for attachment (per clamp)
    • Use with 8" diameter tanks
  • ARP 503-101 Stainless Steel Ford 289-302-351W 12pt Motor Mount Bolt Kit
    New
    ARP 503-101 Stainless Steel Ford 289-302-351W 12pt Motor Mount Bolt Kit
    x
                

    This ARP Motor Mount Bolt kit comes with 4 bolts and flat washers. Each are a polished, stainless steel fastener. They are sold as a set.

    • Ford 289-302-351W
    • 12-point fastener head style
    • Made in the U.S.A
  • Ford FE Series Big Block Motor Mount
    Ford FE Series Big Block Motor Mount
    x
                Mounts a 352, 360, 390, 406, 427 or 428 Ford FE V8 engine into frames up to 38" wide. Uses heavy 1-1/2" O.D. mild steel tubing. Black powder coat finish. 

     


    NOTE: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • 1928-31 Ford Model A Transmission Mount for GM Transmission
    1928-31 Ford Model A Transmission Mount for GM Transmission
    x
                

    Our crossmember kit makes it easy to mount a GM transmission in your '28-'31 Model A frame. This is the same one that you have seen in our assembled "Model A" frames. Transmission mount plate is to be used with a two-bolt transmission mount cushion.

    • 30" wide
    • 2 x 3" Square tubing
    • 8-3/8" from top of tubing to top of plate (top of the crossmember to the trans mount surface)
    • Top of crossmember to mounting holes: 2-7/8"
  • Lokar TD-3350400FM TH350-TH400 Firewall Mount Transmission Dipstick
    Lokar TD-3350400FM TH350-TH400 Firewall Mount Transmission Dipstick
    x
                

    This Turbo 350 or Turbo 400 transmission dipstick features braided stainless covered tubing with billet look handle and stainless hardware. Flexible design gives added mounting versatility for your TH350 or TH400 transmission.

     

  • Chevrolet Style Motor Mount Bolt Kit
    $4.99
    $8.00
    New
    Chevrolet Style Motor Mount Bolt Kit
    x
                

    These quality engine mount bolt kits are designed for use with Small Block and Big Block Chevy style motor mounts.  They feature a zinc coating with solid steel construction and come with all necessary bolts needed for a successful installation.

    • For SBC and BBC motor mounts
    • Zinc finish, steel construction
    • 3/8"-16 thread
    • Sold as a kit
Goto Previous PagePrevious Page
1 2 3 4 5 ... 19