Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"steel brake hose" Page 1 of 12

  • Speedway Universal Brake System Builder Kit - Lines, Fittings, Valves
    Speedway Universal Brake System Builder Kit - Lines, Fittings, Valves
    x
                Please view the product's page for more information
            
  • 37 Degree Flaring Tool for Stainless Steel Line
    37 Degree Flaring Tool for Stainless Steel Line
    x
                

    This is the best flaring tool for the money we have found. It has a ratcheting feed screw with a hardened flaring cone eccentrically mounted in needle bearings which produces a rolling action for even metal flow. This provides uniform wall thickness without galling. It will put a 37 degree flare in 3/16”, 1/4”, 5/16”, 3/8”, ½”, 5/8” and 3/4” tubing. We recommend this tool when flaring 3/16” stainless steel brake line.

    • Provides smooth, uniform flares with minimum effort
    • Ratcheting feed screw handle requires less motion and effort than standard handle
    • Flares steel, stainless steel, hard copper and brass thru wall thickness of .035"

    Instructions (PDF)

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • 3/16 Inch Steel Brake Line
    From: $1.99
    Product Rating: 4.57 Stars
    3/16 Inch Steel Brake Line
    x
                If you choose to use inverted flare hardware on your car, Speedway can save you time, effort, and money. 

    These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools, already have a double flare on each end, have male fittings threaded 3/8"-24 installed and have a 45° inverted flare.

    Double wall, copper plated steel brake line. High burst strength. Resistant to vibration and fatigue. 3/16" O.D. tubing. Each end flared with 3/8"-24 fitting. Seven different precut lengths available.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • 3/16 Inch Steel Brake Line, 25 Ft. Roll
    $14.99
    $15.99
    Product Rating: 4.70 Stars
    3/16 Inch Steel Brake Line, 25 Ft. Roll
    x
                

    Here's the item for added strength and durability; zinc coated steel brake line. Available in a 25' roll of 3/16" line, no nuts included.

    This line bends easily and smoothly with hand tools and can be flared with a 45° double flaring tool. Use in conjunction with our 3/8"-24 inverted flare male brake line nuts.

    Brake System Builder Tip (GIF)

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Stainless Steel Single Brake Line Tube Clamps, Bag/12
    Stainless Steel Single Brake Line Tube Clamps, Bag/12
    x
                

    Brake and fuel lines are something you should mount right the first time. Using our stainless steel tube clamps ensures you never have to replace them. Single clamps are available in 3/16", 1/4", 5/16" or 3/8".

    Bag of 12 tabs with stainless steel 10-32 button head screws.

  • Goodridge 15 Inch Braided Brake Line with 90 Degree End
    Goodridge 15 Inch Braided Brake Line with 90 Degree End
    x
                

    These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    • Stainless steel
    • 90° fitting on one end and a straight fitting on the other
    • Brake lines, clutch lines and gauge lines
    • Available with AN3 or AN4 fittings
    • Sold individually

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • SSBC Stainless Steel 3/16 Inch Brake Lines
    SSBC Stainless Steel 3/16 Inch Brake Lines
    x
                

    This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45° double flare with a 3/8"-24 male fitting. Seven different lengths available.

    NOTE: This tubing is flared from the factory with a double flare machine, therefore it is not recommended that these lines be cut and flared to length.

  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for for independent rear axles (IRS). Kit includes two 20 foot coils of 3/16" stainless steel line, seventeen -3 AN tube nuts, seventeen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, four -3 AN 18" braided stainless hoses, and three 3/8" bulkhead nuts.

    617-8545 Instructions (PDF)

    NOTE: These kits are de

  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Mild Steel -3 AN Brake Line Kit
    Mild Steel -3 AN Brake Line Kit
    x
                

    This brake line kit bridges the gap between our stainless steel -3 AN kit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3 AN fittings to plumb your brake lines. 

    Since we don't know what calipers and master cylinder you will be using, these fittings are sold separately.

     
    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings
  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel Dual Brake Line Tube Clamps, Bag/12
    Stainless Steel Dual Brake Line Tube Clamps, Bag/12
    x
                

    Brake and fuel lines are something you should mount right the first time. Using our stainless steel tube clamps ensures you never have to replace them. Dual brake line clamps have 3/16" on one end with your choice of 3/16", 1/4" or 3/8" on the other end.

    Bag of 12 tabs with stainless steel 10-32 button head screws.

  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for conventional live axle rear suspensions. Includes a 20 foot coil of 3/16" stainless steel line, nineteen -3 AN tube nuts, nineteen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, three -3 AN 18" braided stainless lines, and three 3/8" bulkhead nuts.

    617-8530 Instructions 

  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Mild Steel 45 Degree Inverted Flare Brake Line Kit
    Mild Steel 45 Degree Inverted Flare Brake Line Kit
    x
                

    You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares.

    This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 AN brake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3 AN male adapters, six 3/8"-24 IFF to 1/8" NPT male bracket adapters, and twenty 3/8"-24 inverted flare nuts.

    Brake System Builder Tip (GIF) 

    Note: Needed in addition to this kit will be the adapters to connect the master cylinder to 3/8"-24 inverted flare brake line and the fittings to connect your calipers (or wheel cylinders) to the -3 AN braided lines.

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Speedway -3 AN Universal Racing Brake Line System
    Speedway -3 AN Universal Racing Brake Line System
    x
                Kit includes everything you need to plumb any type of race car from master cylinder to caliper.

    Includes:
    • (2) -3 AN 19" Stainless Steel braided brake lines with 90 deg. end
    • (2) -3 AN 26" Stainless Steel braided brake lines with 90 deg. end
    • (4) Aluminum 3/8"-24 to -3 AN bulkhead frame fittings
    • (3) 8" long 3/16" steel brake lines
    • (3) 20" long 3/16" steel brake lines
    • (3) 40" long 3/16" steel brake lines
    • (4) Removable brake line tabs
    • (4) 3/8"-24 brass unions
    • (2) 3/8"-24 IFF "T" fittings
    • (10) Insulated line clamps
    Note: For off-road use only
  • Speedway -4 AN Universal Racing Brake Line System
    Speedway -4 AN Universal Racing Brake Line System
    x
                Kit includes everything you need to plumb any type of race car from master cylinder to caliper.

    Includes:
    • (2) -4 AN 19" Stainless Steel braided brake lines with 90 deg. end
    • (2) -4 AN 26" Stainless Steel braided brake lines with 90 deg. end
    • (4) Aluminum 3/8"-24 to -4 AN bulkhead frame fittings
    • (3) 8" long 3/16" steel brake lines
    • (3) 20" long 3/16" steel brake lines
    • (3) 40" long 3/16" steel brake lines
    • (4) Removable brake line tabs
    • (4) 3/8"-24 brass unions
    • (2) 3/8"-24 IFF "T" fittings
    • (10) Insulated line clamps
    Note: For off-road use only
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • 45 Degree Double Flaring Tool
    45 Degree Double Flaring Tool
    x
                

    Use this handy tool to double flare mild steel brake lines just like the brake shop does. This tool makes 45° flares only. For 3/16", 1/4", 5/16", 3/8", 1/2" mild steel line only, NOT to be used with stainless steel line.  If using 37° AN fittings with stainless steel line, use 910-89524.

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Dual Outlet Master Cylinder Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Steel Dual Brake Line Kit
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • Standard Tube Flaring Tool, 37 Degree AN
    Standard Tube Flaring Tool, 37 Degree AN
    x
                Please view the product's page for more information
            
  • US Brake Steel Brake Line Kit
    US Brake Steel Brake Line Kit
    x
                Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines. 
            
  • Lever Tube Bender, 3/16 Inch Brake Line
    Lever Tube Bender, 3/16 Inch Brake Line
    x
                Lever type tubing bender features a 10" handle that gives plenty of  leverage to make smooth, professional, 5/8" radius bends in 3/16"  stainless or mild steel brake line tubing. The graduated scale of the  hard steel die permits accurate, repeatable bends time after time.
            
  • Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    x
                These steel braided front brake lines are 19" overall length. They are for common 1978-1988 GM metric style calipers and include 10mm x 1.5 banjo fittings for one end and have 3/8"-24 inverted flare female on the other. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
            
  • Stainless Steel Brake Line, 3/16 Inch
    Stainless Steel Brake Line, 3/16 Inch
    x
                

    Our 3/16" stainless steel tubing is made from 304 grade (rated at 6000 psi) which is double annealed to allow easy flaring.

    NOTE: This line is intended to be used in conjunction with 37 degree AN # 3 style fittings which make use of a single flare. Stainless steel line will not work with 45 degree double flare 3/8"-24 flare nuts. We strongly suggest that the 37 degree single flare (flaring tool # 910-89524) be used when flaring this line for the AN # 3 tube nuts and sleeves.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

    Brake System Builder Tip (GIF)

  • Braided Stainless AN 18 Inch Brake Line
    Braided Stainless AN 18 Inch Brake Line
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    x
                

    Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 1-1/2" to 2" wide.

    Sold in pairs.

  • T-Bucket Stainless Brake Line Kit
    T-Bucket Stainless Brake Line Kit
    x
                

    Complete your '23 T-Bucket chassis with this pre-bent Stainless Steel brake line kit. Includes all lines, proportioning valve, residual pressure valves, brake pressure switch, fittings, and hardware necessary to properly plumb the brakes on your T.

    Notes: Does not work with '27 T chassis.  Also of note, due to unlimited rear axle brake combinations, this kit will not include rear axle housing brake lines, hoses, or fittings.  The kit will include the AN style brake hose to transfer from the rear crossmember to the housing.  The chassis builder/installer will then need to continue the brake line system from that point on to both rear wheels with necessary brake fitting hardware as needed.

    Due to the different brakes and caliper combinations, this kit will NOT include caliper/wheel cylinder fittings.

    Learn more about the proper uses of residual and proportioning valves and by reading our tech article. Brake System Selection.  

  • Stainless 48 Inch Brake Line with 90 Degree End
    Stainless 48 Inch Brake Line with 90 Degree End
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3946 Instructions (PDF)

  • Deluxe Flaring Tool, 37 Degree AN
    Deluxe Flaring Tool, 37 Degree AN
    x
                Please view the product's page for more information
            
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3944 Instructions (PDF)

  • Adjustable Proportioning Blocks With Brake Light Switch
    Adjustable Proportioning Blocks With Brake Light Switch
    x
                

    This adjustable proportioning block allows you to run lines from the master cylinder to the block and then to the appropriate wheels. What is neat about it is that it also contains the proportioning valve and brake light switch. This dramatically reduces the amount of fittings needed and potential leaks.

    The adjustable proportioning valve regulates rear brake pressure, helping to maintain correct brake bias between front and rear brakes. It is designed for dual bowl master cylinders. The distribution block connects to the master cylinder and distributes brake fluid to all four wheels. An easy to turn handle with directional arrows makes it simple to either increase or decrease rear brake pressure.

    The block accepts 3/16" brake lines and the inlets and outlets on this unit are 3/8"-24 inverted flare females.  It has two inlets from the master cylinder, two outlets to the front brakes and one outlet to the rear brakes.  It includes five stainless steel 3/16" fittings and wiring pigtail for rear brake light switch. Mounts to any convenient location. This is not a direct factory replacement for original blocks. Some line modifications may be necessary.

    910-31358 Instructions (PDF)

    Learn more about how adjustable proportioning valves work by reading our tech ar

  • Insulated Brake Line Tube Clamps, Bag/10
    Insulated Brake Line Tube Clamps, Bag/10
    x
                

    You will need these rubber coated fuel line tube clamps and brake line clamps to finish your plumbing job. These tube clamps are made from zinc plated steel, are easy to work with, durable, and corrosion resistant. Choose from a full range of sizes.

    10 clamps per package.

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3546 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3544 Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 12