Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"steel brake components" Page 1 of 4

  • Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1949-54 Chevy spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .380" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs
  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • Wilwood 160-8135 Scalloped Brake Rotor, 11.75 x .81 Inch
    Wilwood 160-8135 Scalloped Brake Rotor, 11.75 x .81 Inch
    x
                

    When it comes to brake rotors, racers are constantly searching for the ultimate balance between the lowest weight and the ability to effectively manage heat. Decreased rotating weight in the drive line provides quicker deceleration under braking and quicker acceleration out of the corners. Lower weight also benefits handling with improved spring and shock control over the unsprung suspension mass. Wilwood's ULS-32 scalloped iron rotors provides effective lightweight options for sprints, late models, modifieds, and other competition applications that race in low to medium temperature ranges.

    Note: Suitable for Light Dirt Racing applications. Scalloped Brake Rotors are unsafe for street use.

    • Scallop configuration provides greatest weight reduction on a vented straight vane iron rotor
    • Scallop machining removes as much as three pounds, or nearly 33% of the rotor mass
    • Vented castings provide increased cooling capacity over machined steel plate rotors
    • Improved structural durability over drilled rotor designs
    • Thread: Thru

    Rotor Application Chart (GIF)

     

    Proper Break-In Procedure for Steel or Cast Iron Rotors

    New steel/i

  • Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    x
                

    Wilwood's racing brake/clutch pedal assemblies are the result of years of hands-on experience, input from racers and chassis builders, and design, material selection and manufacturing techniques that result in durable, lightweight components. They incorporate ergonomics without sacrificing performance, and practical requirements without adding weight.

    • Combines the brake & clutch pedals into one unit
    • Positions M/C inside the firewall away from engine heat
    • Aluminum frame & arm construction
    • Steel pivots & mounting studs
    • Anti-skid pedal pads
    • Clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias
    • Bias can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustment

    Tri reverse mount master cylinder pedal assembly has both clutch and brake pedals with balance bar for dual brake master cylinders.

    910-29977 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood Reverse Swing Triple Master Cylinder Pedal, 6.2:1
    Wilwood Reverse Swing Triple Master Cylinder Pedal, 6.2:1
    x
                

    Wilwood's racing brake/clutch pedal assemblies are the result of years of hands-on experience, input from racers and chassis builders, and design, material selection and manufacturing techniques that result in durable, lightweight components. They incorporate ergonomics without sacrificing performance, and practical requirements without adding weight.

    Tri reverse mount master cylinder pedal assembly has both clutch and brake pedals with balance bar for dual brake master cylinders.

    • Combines the brake & clutch pedals into one unit
    • Positions M/C inside the firewall away from engine heat
    • Aluminum frame & arm construction
    • Steel pivots & mounting studs
    • Anti-skid pedal pads
    • Clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias
    • Bias can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustment

    910-29974 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Eagle Motorsports Black Chromoly Sprint Car Brake Pedal
    Eagle Motorsports Black Chromoly Sprint Car Brake Pedal
    x
                

    Eagle Motorsports factory-built component. Strong, lightweight tubular steel brake pedal for Eagle raised-rail chassis.

    • Strong, lightweight tubular steel construction
    • Designed for Eagle raised-rail chassis, but can be used on other chassis
    • Knurled foot rest
    • Black finish
    • Material: Chromoly lightweight steel
    • Tubing: 1" O.D.
    • Wall thickness: 0.040"
    • Length: (from chassis pivot to bottom): 13"
    • Length: (from chassis pivot to master cylinder spud): 2-1/2" (center to center)
    • Pedal width: 5"

     

  • Wilwood Sprint Right Rear Brake Kit
    Wilwood Sprint Right Rear Brake Kit
    x
                Please view the product's page for more information
            
  • Standard Steel Heim Joint Rod Ends, 5/8-18 RH Male
    Standard Steel Heim Joint Rod Ends, 5/8-18 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Speedway Tribute T-Bucket Kit
    $3,999.99
    Product Rating: 5.00 Stars
    Speedway Tribute T-Bucket Kit
    x
                

    If you thought all T-buckets were the same, think again! The all-new Speedway Motors Tribute T breaks the T-bucket mold. It offers the traditional look of classic, competition-influenced roadsters combined with modern components and refined engineering. All this in a comfortable package that's easy to assemble using basic hand tools.

    The Tribute T frame has an extra-high rear kickup and Model A rear crossmember that will accept our medium-arch rear leaf spring. Rear axle options include our bolt-on Winters quick-change kit 7151801, bolt-on 9" Ford rear axle option 7151809, or a Ford-style banjo rear end of your choice (must be a centered-pinion rear axle). The front suspension uses a 4 inch drop I-beam axle, wishbone-style radius rods and traditional steering with a reversed Corvair steering box. All suspension, steering and brake pedal brackets are pre-welded to the frame and you can choose from flathead F

  • Speedway 1928-1948 Ford Forged Spindles w/ King Pins
    Speedway 1928-1948 Ford Forged Spindles w/ King Pins
    x
                

    These Speedway spindles are one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.

    These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

    • Uses 1937-1941 king pin kit
    • For Ford axles 1928-1948
    • Will not work with 1928-1936 Hubs
    • Includes king pin kit

    Be sure to include our spindle nut kit (910616004) to properly install these spindles.

    Spindle Identification Guide (GIF)

    910-32104 Instructions (PDF)

  • AFCO 6640100 Pillar Vane Flat Brake Rotor, .810 Inch, 11.75 Inch Diameter
    AFCO 6640100 Pillar Vane Flat Brake Rotor, .810 Inch, 11.75 Inch Diameter
    x
                AFCO continues the commitment to bring new and  innovative components to the racing community. Pillar vane brake rotors are  engineered to provide superior strength, reduce rotor weight and run  cooler. At the heart of the rotor, each pillar is diamond shaped  providing brake pad surface stability as well as reducing rotating  weight over rotors of similar strength. Racers will take note of reduced  weight when compared to rotors of similar strength. Reduced rotating  weight means reduced lap times. When brake performance is discussed,  AFCO is the bottom line.
    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and double disc ground to assure precise flatness
    • Precise pillar placement for high volume cooling
    • Premium center - split castings reduce stress risers
    • Rotationally machined balanced - CNC
    • More brake pad surface support (pillars) to prevent rotor cupping
    • Strength of an 80 vane rotor with the weight savings of a 32 vane rotor
    • Machine balanced to reduce vibration
    • Increased cooling capacity
    • Proven by top racers to improve the brake system
    • .810" thick
    • 7" bolt circle
    • 11.75" diameter
    • Weighs 8.2 lbs
    • IMCA approved
  • AFCO 6640108 12.19 Inch Pillar Vane Slotted Rotor, .810 Inch, RH Side
    AFCO 6640108 12.19 Inch Pillar Vane Slotted Rotor, .810 Inch, RH Side
    x
                AFCO continues the commitment to bring new and  innovative components to the racing community. Pillar vane brake rotors are  engineered to provide superior strength, reduce rotor weight and run  cooler. At the heart of the rotor, each pillar is diamond shaped  providing brake pad surface stability as well as reducing rotating  weight over rotors of similar strength. Racers will take note of reduced  weight when compared to rotors of similar strength. Reduced rotating  weight means reduced lap times. When brake performance is discussed,  AFCO is the bottom line.
    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and double disc ground to assure precise flatness
    • Precise pillar placement for high volume cooling
    • Premium center - split castings reduce stress risers
    • Rotationally machined balanced - CNC
    • More brake pad surface support (pillars) to prevent rotor cupping
    • Strength of an 80 vane rotor with the weight savings of a 32 vane rotor
    • Machine balanced to reduce vibration
    • Increased cooling capacity - allows for trail braking lap after lap
    • Gas slots wipe brake pad and eliminate brake system fade
    • .810" thick
    • 7" bolt circle
    • 12.19" diameter
    • Weighs 8.3 lbs
    • For right hand side of chassis
  • AFCO 6640109 12.19 Inch Pillar Vane Slotted Rotor, .810 Inch, LH Side
    AFCO 6640109 12.19 Inch Pillar Vane Slotted Rotor, .810 Inch, LH Side
    x
                AFCO continues the commitment to bring new and  innovative components to the racing community. Pillar vane brake rotors are  engineered to provide superior strength, reduce rotor weight and run  cooler. At the heart of the rotor, each pillar is diamond shaped  providing brake pad surface stability as well as reducing rotating  weight over rotors of similar strength. Racers will take note of reduced  weight when compared to rotors of similar strength. Reduced rotating  weight means reduced lap times. When brake performance is discussed,  AFCO is the bottom line.
    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and double disc ground to assure precise flatness
    • Precise pillar placement for high volume cooling
    • Premium center - split castings reduce stress risers
    • Rotationally machined balanced - CNC
    • More brake pad surface support (pillars) to prevent rotor cupping
    • Strength of an 80 vane rotor with the weight savings of a 32 vane rotor
    • Machine balanced to reduce vibration
    • Increased cooling capacity - allows for trail braking lap after lap
    • Gas slots wipe brake pad and eliminate brake system fade
    • .810" thick
    • 7" bolt circle
    • 12.19" diameter
    • Weighs 8.3 lbs
    • For left hand side of chassis
  • AFCO 6640105 11.75 Inch Pillar Vane Slotted Rotor, .810 Inch, LH Side
    AFCO 6640105 11.75 Inch Pillar Vane Slotted Rotor, .810 Inch, LH Side
    x
                

    AFCO continues the commitment to bring new and innovative components to the racing community. Pillar vane brake rotors are engineered to provide superior strength, reduce rotor weight and run cooler. At the heart of the rotor, each pillar is diamond shaped providing brake pad surface stability as well as reducing rotating weight over rotors of similar strength. Racers will take note of reduced weight when compared to rotors of similar strength. Reduced rotating weight means reduced lap times. When brake performance is discussed, AFCO is the bottom line.

    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and double disc ground to assure precise flatness
    • Precise pillar placement for high volume cooling
    • Premium center - split castings reduce stress risers
    • Rotationally machined balanced - CNC
    • More brake pad surface support (pillars) to prevent rotor cupping
    • Strength of an 80 vane rotor with the weight savings of a 32 vane rotor
    • Machine balanced to reduce vibration
    • Increased cooling capacity - allows for trail braking lap after lap
    • Gas slots wipe brake pad and eliminate brake system fade
    • .810" thick
    • 7" bolt circle
    • 11.75" diameter
    • Weighs 8.1 lbs
    • For left hand side of chassis
  • AFCO 6640110 12.19 Inch Pillar Vane Slotted Rotor, 1.25 Inch, RH Side
    AFCO 6640110 12.19 Inch Pillar Vane Slotted Rotor, 1.25 Inch, RH Side
    x
                AFCO continues the commitment to bring new and  innovative components to the racing community. Pillar vane brake rotors are  engineered to provide superior strength, reduce rotor weight and run  cooler. At the heart of the rotor, each pillar is diamond shaped  providing brake pad surface stability as well as reducing rotating  weight over rotors of similar strength. Racers will take note of reduced  weight when compared to rotors of similar strength. Reduced rotating  weight means reduced lap times. When brake performance is discussed,  AFCO is the bottom line.
    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and double disc ground to assure precise flatness
    • Precise pillar placement for high volume cooling
    • Premium center - split castings reduce stress risers
    • Rotationally machined balanced - CNC
    • More brake pad surface support (pillars) to prevent rotor cupping
    • Strength of an 80 vane rotor with the weight savings of a 32 vane rotor
    • Machine balanced to reduce vibration
    • Increased cooling capacity - allows for trail braking lap after lap
    • Gas slots wipe brake pad and eliminate brake system fade
    • 1.25" thick
    • 7" bolt circle
    • 12.19" diameter
    • Weighs 10.8 lbs
    • For right hand side of chassis
  • AFCO 6640111 12.19 Inch Pillar Vane Slotted Rotor, 1.25 Inch, LH Side
    AFCO 6640111 12.19 Inch Pillar Vane Slotted Rotor, 1.25 Inch, LH Side
    x
                AFCO continues the commitment to bring new and  innovative components to the racing community. Pillar vane brake rotors are  engineered to provide superior strength, reduce rotor weight and run  cooler. At the heart of the rotor, each pillar is diamond shaped  providing brake pad surface stability as well as reducing rotating  weight over rotors of similar strength. Racers will take note of reduced  weight when compared to rotors of similar strength. Reduced rotating  weight means reduced lap times. When brake performance is discussed,  AFCO is the bottom line.
    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and double disc ground to assure precise flatness
    • Precise pillar placement for high volume cooling
    • Premium center - split castings reduce stress risers
    • Rotationally machined balanced - CNC
    • More brake pad surface support (pillars) to prevent rotor cupping
    • Strength of an 80 vane rotor with the weight savings of a 32 vane rotor
    • Machine balanced to reduce vibration
    • Increased cooling capacity - allows for trail braking lap after lap
    • Gas slots wipe brake pad and eliminate brake system fade
    • 1.25" thick
    • 7" bolt circle
    • 12.19" diameter
    • Weighs 10.8 lbs
    • For left hand side of chassis
  • AFCO 6640106 11.75 Inch Pillar Vane Slotted Rotor, 1.25 Inch, RH Side
    AFCO 6640106 11.75 Inch Pillar Vane Slotted Rotor, 1.25 Inch, RH Side
    x
                AFCO continues the commitment to bring new and  innovative components to the racing community. Pillar vane brake rotors are  engineered to provide superior strength, reduce rotor weight and run  cooler. At the heart of the rotor, each pillar is diamond shaped  providing brake pad surface stability as well as reducing rotating  weight over rotors of similar strength. Racers will take note of reduced  weight when compared to rotors of similar strength. Reduced rotating  weight means reduced lap times. When brake performance is discussed,  AFCO is the bottom line.
    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and double disc ground to assure precise flatness
    • Precise pillar placement for high volume cooling
    • Premium center - split castings reduce stress risers
    • Rotationally machined balanced - CNC
    • More brake pad surface support (pillars) to prevent rotor cupping
    • Strength of an 80 vane rotor with the weight savings of a 32 vane rotor
    • Machine balanced to reduce vibration
    • Increased cooling capacity - allows for trail braking lap after lap
    • Gas slots wipe brake pad and eliminate brake system fade
    • 1.25" thick
    • 7" bolt circle
    • 11.75" diameter
    • Weighs 10.6 lbs
    • For right hand side of chassis
  • AFCO 6640107 11.75 Inch Pillar Vane Slotted Rotor, 1.25 Inch, LH Side
    AFCO 6640107 11.75 Inch Pillar Vane Slotted Rotor, 1.25 Inch, LH Side
    x
                AFCO continues the commitment to bring new and  innovative components to the racing community. Pillar vane brake rotors are  engineered to provide superior strength, reduce rotor weight and run  cooler. At the heart of the rotor, each pillar is diamond shaped  providing brake pad surface stability as well as reducing rotating  weight over rotors of similar strength. Racers will take note of reduced  weight when compared to rotors of similar strength. Reduced rotating  weight means reduced lap times. When brake performance is discussed,  AFCO is the bottom line.
    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and double disc ground to assure precise flatness
    • Precise pillar placement for high volume cooling
    • Premium center - split castings reduce stress risers
    • Rotationally machined balanced - CNC
    • More brake pad surface support (pillars) to prevent rotor cupping
    • Strength of an 80 vane rotor with the weight savings of a 32 vane rotor
    • Machine balanced to reduce vibration
    • Increased cooling capacity - allows for trail braking lap after lap
    • Gas slots wipe brake pad and eliminate brake system fade
    • 1.25" thick
    • 7" bolt circle
    • 11.75" diameter
    • Weighs 10.6 lbs
    • For left hand side of chassis
  • AFCO 6640104 11.75 Inch Pillar Vane Slotted Rotor, .810 Inch, RH Side
    AFCO 6640104 11.75 Inch Pillar Vane Slotted Rotor, .810 Inch, RH Side
    x
                AFCO continues the commitment to bring new and  innovative components to the racing community. Pillar vane rotors are  engineered to provide superior strength, reduce rotor weight and run  cooler. At the heart of the rotor, each pillar is diamond shaped  providing brake pad surface stability as well as reducing rotating  weight over rotors of similar strength. Racers will take note of reduced  weight when compared to rotors of similar strength. Reduced rotating  weight means reduced lap times. When brake performance is discussed,  AFCO is the bottom line.
    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and double disc ground to assure precise flatness
    • Precise pillar placement for high volume cooling
    • Premium center - split castings reduce stress risers
    • Rotationally machined balanced - CNC
    • More brake pad surface support (pillars) to prevent rotor cupping
    • Strength of an 80 vane rotor with the weight savings of a 32 vane rotor
    • Machine balanced to reduce vibration
    • Increased cooling capacity - allows for trail braking lap after lap
    • Gas slots wipe brake pad and eliminate brake system fade
    • .810" thick
    • 7" bolt circle
    • 11.75" diameter
    • Weighs 8.1 lbs
    • For right hand side of chassis
  • AFCO 6640112 11.75 In Pillar Vane Drilled Rotor, .810 In
    AFCO 6640112 11.75 In Pillar Vane Drilled Rotor, .810 In
    x
                AFCO continues the commitment to bring new and  innovative components to the racing community. Pillar vane brake rotors are  engineered to provide superior strength, reduce rotor weight and run  cooler. At the heart of the rotor, each pillar is diamond shaped  providing brake pad surface stability as well as reducing rotating  weight over rotors of similar strength. Racers will take note of reduced  weight when compared to rotors of similar strength. Reduced rotating  weight means reduced lap times. When brake performance is discussed,  AFCO is the bottom line.
    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and double disc ground to assure precise flatness
    • Precise pillar placement for high volume cooling
    • Premium center - split castings reduce stress risers
    • Rotationally machined balanced - CNC
    • More brake pad surface support (pillars) to prevent rotor cupping
    • Strength of an 80 vane rotor with the weight savings of a 32 vane rotor
    • Machine balanced to reduce vibration
    • Increased cooling capacity - allows for trail braking lap after lap
    • Drilled to allow gas to escape - improves rotor and pad efficiency
    • .810" thick
    • 7" bolt circle
    • 11.75" diameter
    • Weighs 7.1 lbs
  • AFCO 6640101 Pillar Vane Flat Rotor, 1.25 Inch, 11.75 Inch Diameter
    AFCO 6640101 Pillar Vane Flat Rotor, 1.25 Inch, 11.75 Inch Diameter
    x
                AFCO continues the commitment to bring new and  innovative components to the racing community. Pillar vane brake rotors are  engineered to provide superior strength, reduce rotor weight and run  cooler. At the heart of the rotor, each pillar is diamond shaped  providing brake pad surface stability as well as reducing rotating  weight over rotors of similar strength. Racers will take note of reduced  weight when compared to rotors of similar strength. Reduced rotating  weight means reduced lap times. When brake performance is discussed,  AFCO is the bottom line.
    • Designed using premium grade alloys for superb thermal shock stability
    • Machined and double disc ground to assure precise flatness
    • Precise pillar placement for high volume cooling
    • Premium center - split castings reduce stress risers
    • Rotationally machined balanced - CNC
    • More brake pad surface support (pillars) to prevent rotor cupping
    • Strength of an 80 vane rotor with the weight savings of a 32 vane rotor
    • Machine balanced to reduce vibration
    • Increased cooling capacity
    • Proven by top racers to improve the brake system
    • 1.25" thick
    • 7" bolt circle
    • 11.75" diameter
    • Weighs 10.7 lbs
    • IMCA approved
  • AFCO 6640103 Pillar Vane Flat Rotor, 1.25 Inch, 12.19 Inch Diameter
    AFCO 6640103 Pillar Vane Flat Rotor, 1.25 Inch, 12.19 Inch Diameter
    x
                Please view the product's page for more information
            
  • Standard Steel Heim Joint Rod Ends, 1/2-20 RH Male
    Standard Steel Heim Joint Rod Ends, 1/2-20 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Standard Steel Heim Joint Rod Ends, 3/8-24 RH Male
    Standard Steel Heim Joint Rod Ends, 3/8-24 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Standard Steel Heim Joint Rod Ends, 5/8-18 LH Male
    Standard Steel Heim Joint Rod Ends, 5/8-18 LH Male
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Standard Steel Heim Joint Rod Ends, 3/4-16 RH Male
    Standard Steel Heim Joint Rod Ends, 3/4-16 RH Male
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 1/2 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 1/2 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Heim Sizes Chart (GIF)

  • Currie 9+-98828 9+ Cut To Fit 28 Spline Axles, 28 Inches Long
    Currie 9+-98828 9+ Cut To Fit 28 Spline Axles, 28 Inches Long
    x
                Please view the product's page for more information
            
  • Currie 9+-98832 9+ Cut To Fit 28 Spline Axles, 32 Inches Long
    Currie 9+-98832 9+ Cut To Fit 28 Spline Axles, 32 Inches Long
    x
                Please view the product's page for more information
            
  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 5/8 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 5/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Heim Sizes Chart (GIF)

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard"  rod ends. They have close tolerance and have a 3 piece medium duty rod  end. Carbon steel body, 5210 precision ground ball and feature a Teflon  Kevlar race. Self lubrication teflon liner to seal out dirt and debris.  Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

     

  • Standard Steel Heim Joint Rod Ends, 1/2-20 LH Male
    Standard Steel Heim Joint Rod Ends, 1/2-20 LH Male
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Bolt-In 1947-54 1/2 Ton Chevy Pickup Triangulated Four Bar Rear Susp Kit
    Bolt-In 1947-54 1/2 Ton Chevy Pickup Triangulated Four Bar Rear Susp Kit
    x
                

    Build a firm foundation for your vintage 1/2 ton Chevy pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a complete '47-'54 Chevy pickup frame using only basic hand tools and a drill.

    This triangulated four bar rear suspension will greatly improve both the ride quality and handling of your Chevy.  

    • for 1/2 ton chassis
    • 60" wide 9” rearend housing with welded suspension brackets
    • Chromoly four bars with urethane bushings
    • Bolt-on frame brackets and shock crossmember
    • 11” steel-bodied coil-over shocks

    910-04754 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown. Third member, axle shafts and rear disc brake kit are shown in the photo for reference only, but are not included as part of this kit and are available separately.

  • AERO Appearance 5695 Away Degreaser - Tire, Wheel & Engine Cleaner
    AERO Appearance 5695 Away Degreaser - Tire, Wheel & Engine Cleaner
    x
                

    Formulated to remove heavy soil, brake dust and grease found on aircraft safely and effectively, AWAY is an environmentally friendly degreaser. It is a must that our degreaser perform to the very highest quality standards removing all dirt, soil, grease or brake dust from the surface of aircraft, while being gentle on sensitive components and specially treated surfaces.

    AWAY degreaser will replace a shelf or two of cleaning products in your garage. It works as a bug & tar remover, a wheel cleaner, a tire cleaner and an engine degreaser. AWAY cleaner is powerful enough to cut through grease on engines and baked-on brake dust… even on roughcast aluminum wheels. Tar, sap, and bugs will break down in just a matter of seconds.

  • Standard Steel Heim Joint Rod Ends, 3/8-24 RH Female
    Standard Steel Heim Joint Rod Ends, 3/8-24 RH Female
    x
                

    Standard rod ends are for general purpose applications and are a 2-piece design with a low carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Speedway 1928-1948 Ford Forged Spindles Only
    Speedway 1928-1948 Ford Forged Spindles Only
    x
                

    These Speedway spindles are a one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford kingpins. They  fit Ford axles from '28-'48 and can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

    • Uses 1937-1941 kingpin kit
    • For Ford axles 1928-1948
    • Will not work with 1928-1936 Hubs

    Be sure to include our kingpin kit (91032121) with these spindles.

    Spindles also available in kit form with Standard or Deluxe kingpins.

    Spindle Identification Guide (GIF)

    910-32121 Instructions (PDF)

    910-32122 Instructions (PDF)

  • FK Rod Ends SJM4T Stainless Steel 1/4 Inch RH Male Heim Joint
    FK Rod Ends SJM4T Stainless Steel 1/4 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/4" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/8" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML8T Stainless Steel 1/2 Inch LH Male Heim Joint
    FK Rod Ends SJML8T Stainless Steel 1/2 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/2" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM7T Stainless Steel 7/16 Inch RH Male Heim Joint
    FK Rod Ends SJM7T Stainless Steel 7/16 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 7/16" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

Goto Previous PagePrevious Page
1 2 3 4