Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"steel block pump" Page 1 of 6

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • C&S Specialties Small Block Chevy Alcohol Fuel Pump
    C&S Specialties Small Block Chevy Alcohol Fuel Pump
    x
                

    C&S Specialties has addressed all problem areas of previous 6-valve pumps in designing their rugged Tool Steel mechanical fuel pumps. This exclusive casting design adds material in 7 places to eliminate cracking, breakage, waviness and leakage. Plus, six High Flow pumping valves, combined with internal porting, are proven to deliver twice the fuel flow over other 6-valve alcohol pumps.

    • Unique baked-on coating to resist corrosion
    • Unique stepped diaphragm reduces stress and increases life
    • Two stainless steel springs instead of one increases reliability
    • CNC milled pump arm from tool steel, not stamped steel
    • Pump arm bushing made from tool steel
    • Pump shaft also made of tool steel, not stamped steel
    • 1/2" NPT inlet and outlet
  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • Speedway Small Block Chevy Stainless Engine Bolt Kit
    Speedway Small Block Chevy Stainless Engine Bolt Kit
    x
                

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.

    Kit includes:

    • Intake manifold bolts
    • Timing cover bolts
    • Oil pan bolts
    • Short water pump bolts
    • Long water pump bolts
    • TH350/400 transmission pan bolts
    • Exhaust header bolts
    • Water neck bolts, 1955-1965
    • Water neck bolts, 1966-1986
    • Flywheel cover bolts
  • Small Block Chevy Power Steering Pump Bracket
    Small Block Chevy Power Steering Pump Bracket
    x
                

    This power steering pump bracket mounts a stock-style GM pump to a S/B Chevy block. Must be used with a short style water pump. Mounts on the lower left side. Bracket is zinc plated with threaded shaft. Designed to work with a '70-'82 GM pump that has a threaded pulley shaft, not a press-on style.

    Works with bolt-on or press-on pulleys with a mount spacing of 3.75". Due to the variety of pulley configurations, it is likely that you will have to space the pump/bracket for belt alignment.

    Note: This will NOT work when used on early 1970's Chevelle/Camaro chassis with a steering box.

  • Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    x
                

    Mr.Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

    • Quality chrome finish
    • Fits 265-400 SBC engines
    • Mounts stock OEM pump
    • Includes gasket
  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Small Block Chevy Oil Pump Shaft
    Small Block Chevy Oil Pump Shaft
    x
                Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve. Works with stock or high volume pumps.
            
  • 1955-68 Small Block Chevy Single Groove Lower Pulley, Short Water Pump
    1955-68 Small Block Chevy Single Groove Lower Pulley, Short Water Pump
    x
                

    These lower pulleys for 1955-68 short water pumps feature a single groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines. 

    • Lower pulley
    • 1955-68 283-350 V8 small block Chevy engine
    • Short water pumps
    • Single groove  
    • 6-3/4" Diameter
    • Chrome plated finish

    Note: Use our upper pulley (91015421) to correspond for proper alignment with these lower pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

     

  • 1955-68 Small Block Chevy Single Groove Upper Pulley, Short Water Pump
    1955-68 Small Block Chevy Single Groove Upper Pulley, Short Water Pump
    x
                

    These upper pulleys for 1955-68 short water pumps feature a single groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines.  Sitting flat on the workbench, the pulley is 2-3/4" high in the center at the water pump.

    • Upper pulley
    • 1955-68 283-350 V8 small block Chevy engine
    • Short water pumps
    • Single groove  
    • 7-1/8" Diameter
    • Chrome plated finish

    Note:  These upper pulleys will not work with our lower pulley (91015424).  Use our lower pulley (91015422) to correspond for proper alignment with these upper pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Small Block Chevy Fuel Pump Block Off Plate, Chrome
    Small Block Chevy Fuel Pump Block Off Plate, Chrome
    x
                Chrome plated steel fuel pump block off plate for 1955-83 S/B Chevy.
            
  • Chevy Fuel Pump Push Rod for Roller Cams
    Chevy Fuel Pump Push Rod for Roller Cams
    x
                

    These lightweight fuel pump pushrods are specifically for use with 8620 and 9310 steel billet roller and slot hardfaced camshafts. One end of the pushrod has a bronze tip to bear against the fuel pump eccentric on the camshaft, eliminating the wear problems that occur when using a standard fuel pump pushrod (especially in endurance type applications).

    • Fits both S/B Chevy 262-400 (1955-1995) and B/B Chevy 396-454 (1965-1990)
    • Heat treated tubular steel construction
    • Centerless ground for concentricity
    • Much lighter than solid steel O.E. type pushrods

     

     

  • ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    x
                For S/B Chevy only. Heat treated Chromoly steel. Comes with grade 8 nut and heat treated washer.
            
  • Billet FM2222PC B/B Chevy Mid Mount Serpentine Conversion Kit Press-On
    Billet FM2222PC B/B Chevy Mid Mount Serpentine Conversion Kit Press-On
    x
                Please view the product's page for more information
            
  • Carter M60968 Small Block Ford 172 GPH Racing Fuel Pump
    Carter M60968 Small Block Ford 172 GPH Racing Fuel Pump
    x
                

    Carter Super mechanical pumps contain heavy-duty diaphragms, high speed anti-float springs, large full flow valves, lightweight all-aluminum castings and a tough, heat-treated lever. The fittings are installed at the factory, not welded on like many competitors. Plus, they are made of steel to resist damage from cross threading.

    • AN 10 inlet fitting, AN 8 outlet fitting
    • Rated 172 GPH flow
    • 6-8 PSI (no regulator required)
    • Viton check valves
    • SOTO diaphrams
    • Gas only! Not for use with alcohol
  • GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    New
    GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    x
                Please view the product's page for more information
            
  • Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    x
                

    Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.

  • Moroso 20431 Big Block Chevy Conversion Oil Pan
    Moroso 20431 Big Block Chevy Conversion Oil Pan
    x
                

    If you have ever tried to put a B/B chevy in a Tri-Five Chevy or Chevy II, you know there just isn't much room. This pan was designed to make the job a little easier. This pan has a 7 quart capacity (w/o filter) and accepts up to a 4-1/4" stroke with steel rods.

    • Pick-up 54524430 is required for installation
    • Notched rear sump clears steering linkage
    • Accepts strokes up to 4.250" with steel rods, 4.090" with aluminum rods
    • Compatible with most starter/flywheel combinations
    • 1/4" NPT Thread for dipstick assembly, suggested dipstick # 545-25971

    Fits Mark IV style 396-454 (except Gen V and Gen VI) Big Block Chevy V-8s. For 1962-67 Chevy II (without power steering) and 1955-57 Chevys. Transmission MUST be in stock position.

    Please see below for suggested oil pump pick-up.

    Instructions (PDF)

  • Small Block Chevy Performance Aluminum Water Pump, Short
    Small Block Chevy Performance Aluminum Water Pump, Short
    x
                Each pump is manufactured from T6 aluminum and features an impeller with curved vanes for maximum flow, pressure and equal distribution to both sides of the block. It also features a unique seal assembly for leak proof operation. 
    • 3/4" shaft with 5/8" fan pilot snout
    • 1/2" NPT hole on passenger side (for heater hose) and on top (for bypass hose)
    • Stamped steel rear plate
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow rate and pressure rate
    • Weighs 6 lbs.
    • Does not have a set screw retaining the fan hub

    NOTE: This pump is designed for street use and is not to be run on a motor which exceeds 5,500 RPM. 

    910-15580 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Small Block Chevy Short Heavy Duty Aluminum Water Pump
    Small Block Chevy Short Heavy Duty Aluminum Water Pump
    x
                This super heavy duty race water pump features additional casting designs for more strength and reinforcement, plus a 3/4" fan pilot shaft and super duty bearing. It has 1/2" NPT threaded outlets on both the top and side, plus a 3/16" steel rear plate. It weighs 7-3/4 lbs.
    • 3/4" fan snout
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Threaded for adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow and pressure

    910-15581 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    x
                

    If you are looking for a high flow fuel pump you can depend on night after night, this is it! Holley's high output, heavy duty mechanical fuel pumps are constructed of rugged materials and feature fuel body castings that can be rotated to accommodate various plumbing situations. 3/8" NPT inlet and outlet.

    For use with gasoline only. NOT for use with alcohol.

    • High output fuel flow
    • Heavy duty construction for continuous high RPM performance
    • Six high flow valves ensure adequate and continuous fuel flow
    • Extra beefy steel rocker arm to help withstand severe race usage
    • Inlet & outlet tapped for 3/8" NPT

    Holley Pump Tech Info (PDF)

  • Deluxe Hi-Volume Small Block Chevy Oil Pump
    Deluxe Hi-Volume Small Block Chevy Oil Pump
    x
                

    This oil pump has all it's components hand picked and fit to make it the best. The nickel body and end plate have been machined to balance the pressure at all rpm's which also reduces cavitation and increases longevity. Includes three pressure springs and a steel oil pump driveshaft sleeve.

    For Small Block Chevy V-8. Use 5/8" pick-up tube.

  • Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
    Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
    x
                

    If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

    • Pick-up 54524120 or 54524122 is required for installation
    • Wet Sump, 9" Deep
    • Clears 3.80" stroke with most steel rods
    • Notched sump clears steering linkage
    • Compatible with most starter/flywheel combinations
    • Reduces oil temperature

    For cars without power steering. Pump pick-up NOT included but is available as noted below.

    Moroso Oil Pan Instructions (PDF)

  • Speedway Small Block Chevy Short Steel Water Pump
    Speedway Small Block Chevy Short Steel Water Pump
    x
                Our 100% new, pressure cast & CNC machined pumps feature characteristics often overlooked by other manufacturers - precision-ground hubs to eliminate vibration; heavy duty ball-roller or ball-ball bearings; ceramic seal assemblies for extended life; closed-vane impellers for unsurpassed output; and zinc-coated backplates to stand up to corrosion. 

    "Short" style pumps came on all factory small block V8s from 1955 to 1968. However, this pump will fit all S/B Chevys up to 1985.

    NOTE: This pump is designed primarily for street use and should not exceed 5,500 RPM.

    Small Block Chevy Water Pump Installation Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Moroso 20212 Chevy II 1986-Up Small Block Oil Pan
    Moroso 20212 Chevy II 1986-Up Small Block Oil Pan
    x
                

    If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

    • Pick-up 54524120 or 54524122 is required for installation
    • Wet Sump, 9" Deep
    • Clears 3.80" stroke with most steel rods
    • Notched sump clears steering linkage
    • Compatible with most starter/flywheel combinations
    • Reduces oil temperature

    For cars without power steering. Pump pick-up NOT included but is available as noted below.

    Moroso Oil Pan Instructions (PDF)

  • King Chrome Small Block Chevy 1969-86 Long Water Pump
    King Chrome Small Block Chevy 1969-86 Long Water Pump
    x
                

    1969-86 Small Block Chevy (SBC) King chrome long leg water pump from OEM castings. Polished to a higher standard and beautifully chrome plated. Built from NEW components.

    •  Drilled & tapped for factory accessories
    • 6-15/16" from block surface to face of pulley flange

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

     

  • Melling 10550 Select Small Block Chevy Oil Pump, High Volume
    Melling 10550 Select Small Block Chevy Oil Pump, High Volume
    x
                

    Melling Select Series oil pumps are engineered to give you superior oiling for your high performance engine. 5/8" pickup required.

    • Steel billet gears with drive gear pinned to shaft
    • CNC machined housing and cover plate
    • Coated for wear and corrosion resistance
    • 5/8" inlet

    Available in standard volume or high-volume, which has 25% more volume.

  • Big Block Chevy Economy Long Water Pumps
    Big Block Chevy Economy Long Water Pumps
    x
                

    These 100% new steel water pumps are chrome plated and are perfect for your 396-454 B/B Chevy "driver."

    Water Pump ID Illustration

    Install Instructions (PDF) 

  • Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs

    Includes 12550 chromoly intermediate shaft, stud kit and +10# and -10# relief springs.

  • Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in. 

    Includes 12550 chrome moly intermediate shaft, stud kit and +10# and -10# relief springs.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs
  • Small Block Ford 289-351W Water Pump, RH Inlet
    Small Block Ford 289-351W Water Pump, RH Inlet
    x
                

    Use this water pump on your 289, 302, 351W Small Block Ford engine and gain much needed steering and fuel pump clearance. With its passenger side inlet, this pump lets Ford-powered street rods take advantage of less expensive and more available "Chevy outlet position" radiators. Plain steel finish.

    • This pump measures 5-1/2" from mounting surface to pulley mount flange
    • This pump is not for a serpentine belt system
    • The fan hub has a 1-3/4" bolt pattern
    • The lower hose is on the passenger side and accepts a 1-3/4" hose

    Small Block Ford Water Pump Installation Instructions (PDF)

  • GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5 6