Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"stainless steel taillights" Page 1 of 3

  • 1928-1931 Ford Model A Stainless Tail Lights
    1928-1931 Ford Model A Stainless Tail Lights
    x
                

    Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

    • 3.851" diameter
    • 3" depth
    • 3.851" height
    • 1-3/4" mount 

    Wire colors:

    • Housing - Ground
    • Tail - Black
    • Stop - Green

    These tail lights have two bulbs in them that are of a single filament style. 

  • 1937-1938 Chevy Red Tail Light Assembly
    1937-1938 Chevy Red Tail Light Assembly
    x
                

    Use these beautiful polished stainless steel tail lights to upgrade your 1937-1939 Stovebolt or hang 'em on the back of a T-bucket for a different look! Polished stainless steel housing with glass lens. Choose left or right.

    • The left tail light (pictured here) also features a clear license plate lens
    • Each side uses (2) single filament 1156 bulbs
    • Wiring Guide:
      • White - Ground
      • Red - Stop/turn
      • Black - Taillight
    • 3" wide x 4-1/4" high

    Although listed as a 1937-1938 Chevy, this taillight is very universal.

  • 1937-1938 Chevy LED Tail Light Assembly
    1937-1938 Chevy LED Tail Light Assembly
    x
                

    Use these brilliant polished stainless steel LED tail lights to upgrade your 1937-1938 Stovebolt or hang 'em on the back of a T-bucket for a different look! Choose left or right.

    • 45 super bright red LED's
    • Polycarbonate lens
    • Polished stainless steel housing
    • For 12V systems
    • Left-side taillight has licence plate light

    This taillight works best with a 1937-38 mount bracket. If you desire a universal-mount light, 91137013 pickup housings have an almost flat back for ease of mounting.

    1937-1938 Chevy Tail Light Installation Instructions (PDF)

  • 1928-1931 Ford Model A LED Tail Light
    1928-1931 Ford Model A LED Tail Light
    x
                

    Made of polished stainless steel with glass lens. This LED tail light is an excellent replacement or addition to your 1928-1931 Model 'A'. Choose right or left.

    • 19 Super Bright Red LED's
    • Drivers side (Left side) includes a 4 LED White License Light
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems 

    1928-1931 Tail Light Installation Instructions (pdf)

  • 1938-1956 Ford Pick-up Tail Light Brackets, Stainless Steel
    1938-1956 Ford Pick-up Tail Light Brackets, Stainless Steel
    x
                

    These stainless steel tail light brackets are designed to fit 1938-1956 Ford pick-ups and 1953-1956 Ford cars. They work for either left or right side. Sold Each

    • 1938-1956 Ford Pick-ups
    • 1953-1956 Cars
    • Left and Right Side
    • Stainless Steel

    Note: The dimensions on these brackets are: Tail light mount holes 1-3/4"on center, Bracket mount holes 2"on center, overall bracket width 6". With mount centers for the tail lights at 1-3/4".

    These brackets will accept the Model A tail lights (91127001), the ’32 tail lights (91137005), or the 33-36 tail lights (91137018) and also the same lights in the LED part numbers.

     

  • 1937-1938 Chevy Blue Dot Tail Light Assembly
    1937-1938 Chevy Blue Dot Tail Light Assembly
    x
                

    Use these beautiful polished stainless steel tail lights to upgrade your 1937-1939 Stovebolt or hang 'em on the back of a T-bucket for a different look! Polished stainless steel housing with blue dot glass lens. Choose left or right.

    • The left tail light (pictured here) also features a clear license plate lens
    • Each side uses (2) single filament 1156 bulbs
    • Wiring Guide:
      • White - Ground
      • Red - Stop/turn
      • Black - Tail light
    • 3" wide x 4-1/4" high

    Although listed as a 1937-1938 Chevy, this taillight is very universal.

  • 1932 Ford Rear License Plate Bracket
    From: $29.99
    Product Rating: 4.00 Stars
    New
    1932 Ford Rear License Plate Bracket
    x
                

    These rear license plate mounting brackets are for your 1932 Ford passenger car. They mount the license plate above the taillight on a '32 Ford. Mounts between the taillight and the taillight mount bracket and is held in place by the taillight mount screws. This license tag bracket is available in black or polished stainless steel finishes.  Bracket is 10-1/4" wide outside of slots. There is adjustment from 3-3/4" to 6-1/2" from bolt center to bottom of bracket.

    • 1932 Ford passenger car
    • Original replacements
    • Mounts the license plate above the taillight
    • Held in place by the taillight mount screws
    • Choose from black or polished stainless steel finish
  • 1932 Ford LED Tail Light Assembly
    1932 Ford LED Tail Light Assembly
    x
                

    Polished stainless steel housing with powerful red LED tail lights. An excellent replacement or addition to your 1932 Ford Deuce. Choose right or left.

    • 17 super bright red LED's
    • 4" diameter
    • 3" deep
    • Drivers side (Left side) includes a 4 LED white license light
    • Polished stainless steel housing
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems

    1932 Ford LED Tail Light Installation Instructions (PDF)

  • 1933-36 Ford License Plate Bracket, Rear
    New
    1933-36 Ford License Plate Bracket, Rear
    x
                

    These rear license plate mounting brackets are designed to fit 1933-1936 Ford passenger cars. This license tag bracket is available in black or polished stainless steel finishes.  These reproduction brackets are designed to fit between the driver's side rear taillight bracket and taillight.

    • 1933-1936 Ford passenger cars
    • Mounts to original style driver's side rear taillight bracket and taillight
    • Available in black or polished stainless steel finishes
  • 1930-31 Ford Model A Style Headlights, Stainless Steel
    1930-31 Ford Model A Style Headlights, Stainless Steel
    x
                

    These polished stainless steel headlights work with 1930-31 Model A Fords.  They feature a 12 volt quartz halogen bulb behind the original lens. The light is 9"  in diameter and attach to the headlight bar with the long bolt thru the bottom and then through the bar.

    The wires on the Model A headlight come out the back side thru a brass fixture that will accept the common conduit used on the Model A’s. This would be an excellent choice and we also offer others with the wires exiting the light through the attachment bolt if desired.

    This headlight features a high output Halogen H4 dual filament bulb that is replaceable under part number 91064193. It does have high and low beam function. 

    • Halogen
    • 9" diameter
    • Polished stainless steel
    • 12 volt quartz bulb

     

  • 1932 Ford Headlights, Stainless Steel
    1932 Ford Headlights, Stainless Steel
    x
                Polished stainless steel headlights feature a 12 volt H5 quartz halogen bulb (high & low beams) behind original style lens with mounting stud. Light is 10" diameter.
            
  • Stainless Steel Dietz Type Headlights, Halogen Bulb
    Stainless Steel Dietz Type Headlights, Halogen Bulb
    x
                

    Our universal fit Deitz-type 7" headlights feature stainless steel housings and a 12 volt halogen bulb with both high & low beams. "Drilled" mounting stud measures 1/2"-13. The pre-wired plug has 3 wires with 6" leads.

  • Stainless Steel Headlight Conduit Set, 12 Inch
    Stainless Steel Headlight Conduit Set, 12 Inch
    x
                Finish off your headlight wiring with these attractive and affordable polished stainless steel lengths of conduit. Conduit can be used to hide and protect fragile headlight, taillight or horn wires that are exposed to the elements. Two-piece set includes polished stainless ferrules to secure the conduit. Conduit measures 12" long with 3/8" I.D.
            
  • 1933-1936 Ford Stainless Tail Lights
    1933-1936 Ford Stainless Tail Lights
    x
                

    These are an exact duplicate of the original 1933-1936 Ford car glass lens tail lights. Also fits later model pick-ups and wagons. Left light has a lens to illuminate the license plate.

    • Highly polished stainless steel housing & rim
    • Cloth braided wire loom
    • Stainless steel screws
    • 12 volt bulb
    • Red glass lens
    • Choose right or left
  • 1938-39 Ford Red LED Tail-Stop Lights
    1938-39 Ford Red LED Tail-Stop Lights
    x
                

    Each of these complete 1938-39 Ford LED taillights are optimized for visibility and proper fit on the car. Taillights include a pressure cast polished stainless bezel, glass lens, and stainless steel hardware.

    • 28 super-bright LEDs
    • Glass lens
    • Epoxy coated, fully-sealed electronics
    • Stainless steel rim and black housing 

    911-37014 Instructions (PDF)

  • Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 15 super bright red LED's
    • Lens is 1/2" by 4"
    • Comes with T bolts to hold housing in place
  • Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 30 super bright red LED's
    • Lens is 1/2" by 8"
    • Comes with T bolts to hold housing in place
  • Hagan Street Rods 6-3RDLED 6 Inch Flush-Fit Third Brake Light
    Hagan Street Rods 6-3RDLED 6 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 20 super bright red LED's
    • Lens is 1/2" by 6"
    • Comes with T bolts to hold housing in place
  • Stainless Steel Dietz Type Headlights, Standard Bulb
    Stainless Steel Dietz Type Headlights, Standard Bulb
    x
                

    Our universal fit Deitz-type 7" headlights feature stainless steel housings and a 12 volt sealed beam bulb with both high & low beams. "Drilled" mounting stud measures 1/2"-13. The pre-wired plug has 3 wires with 6" leads.

  • 1933-1936 Ford LED Tail Light Assembly
    1933-1936 Ford LED Tail Light Assembly
    x
                

    Polished stainless steel housing with powerful red LED tail lights behind a glass lens. An excellent replacement or addition to your 1933-1936 Ford car. Also fits later model pick-ups and wagons. Choose right or left.

    • 19 Super Bright Red LEDs
    • Drivers side (Left side) includes a 5 LED White License Light
    • Polished stainless steel housing
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems
    1933-1936 LED Tail Light Installation Instructions (pdf)

     

  • 1932 Ford Stainless Tail Lights
    From: $29.99
    Product Rating: 4.67 Stars
    1932 Ford Stainless Tail Lights
    x
                

    These are an exact duplicate of the original 1932 Ford glass lens tail lights. Left light has a lens to illuminate license plate. Choose left or right.

    • 12 volt bulb
    • Highly polished stainless steel housing & rim
    • Cloth braided wire loom
    • Stainless steel screws
    • Glass red lens
    • 3-7/8" diameter, 2-3/8" depth
    • 2-11/16" overall depth (includes the wire retainer on the back of the lamp)

     

  • Universal Stainless Steel Headlight Mounting Cup
    Universal Stainless Steel Headlight Mounting Cup
    x
                Use these stainless steel cone mounting cups to add style to your headlight/taillight application while supporting the light shell at the base.  Available in a plain finish as well. (91061034)
    • Great for headlights and taillights
    • Designed for use with universal mounting bracket (91061026)
  • 1941-1948 Chevy Tail Light Assembly
    1941-1948 Chevy Tail Light Assembly
    x
                High quality, true replica of the 1941-1948 Chevy passenger car tail light assembly. Polished stainless steel rim, red glass lens, steel housing. 12 volt. 

     


  • Adjustable Proportioning Blocks With Brake Light Switch
    Adjustable Proportioning Blocks With Brake Light Switch
    x
                

    This adjustable proportioning block allows you to run lines from the master cylinder to the block and then to the appropriate wheels. What is neat about it is that it also contains the proportioning valve and brake light switch. This dramatically reduces the amount of fittings needed and potential leaks.

    The adjustable proportioning valve regulates rear brake pressure, helping to maintain correct brake bias between front and rear brakes. It is designed for dual bowl master cylinders. The distribution block connects to the master cylinder and distributes brake fluid to all four wheels. An easy to turn handle with directional arrows makes it simple to either increase or decrease rear brake pressure.

    The block accepts 3/16" brake lines and the inlets and outlets on this unit are 3/8"-24 inverted flare females.  It has two inlets from the master cylinder, two outlets to the front brakes and one outlet to the rear brakes.  It includes five stainless steel 3/16" fittings and wiring pigtail for rear brake light switch. Mounts to any convenient location. This is not a direct factory replacement for original blocks. Some line modifications may be necessary.

    910-31358 Instructions (PDF)

    Learn more about how adjustable proportioning valves work by reading our tech ar

  • 1942-1948 Ford Car Tail Lights
    1942-1948 Ford Car Tail Lights
    x
                

    Duplicate of original 1942-1948 Ford passenger car taillights with polished stainless steel housings complete with red glass lens. Uses a single 1157 dual filament bulb (included). Mounting gasket NOT included.

    • Highly polished stainless steel housing & rim
    • Cloth braided wire loom
    • 12 volt bulb
    • Red glass lens
  • 1928-1929 Ford Model A Stainless Steel Cowl Head Light Assembly
    1928-1929 Ford Model A Stainless Steel Cowl Head Light Assembly
    x
                

    These cowl head light assemblies from Vintique Inc. are an exact reproduction from original models but updated with built-in turn signals. They are made for 1928-1929 Model A Ford's and feature stainless steel buckets and chrome arms. These head lights include 12 volt bulbs with all wiring and mounting hardware.

    • Exact reproduction, updated with built-in turn signals
    • Stainless steel buckets and chrome arms
    • 12 volt bulbs
    • Wiring and mounting hardware included
  • 1950 Pontiac LED Tail Light Conversion Lens
    1950 Pontiac LED Tail Light Conversion Lens
    x
                

    This LED tail light conversion kit converts your 1950 Pontiac tail, stop, and turn signal lights into very bright and visible LED's. LED's feature a wide viewing angle of 100 degrees as well as cool operation and long life. This kit is designed to bolt into a 1949-52 Ponitac tail light housing with the provided stainless steel brackets. Your stock lenses are reused for a factory appearance when the lights are off. A true bolt-in for stock Pontiac taillight housings or reproduction units.

    Kit Contents:

    • (2) LED arrays
    • (4) solderless connectors
    • (2) LED to car electrical harness
    • Installation instructions

    The red wire is for stop light/turn signal. The black wire is for the tail light.

    1950 Pontiac LED Tail Light Conversion Instructions (PDF)

  • 1956 Chevy LED Tail Light Conversion Kit
    1956 Chevy LED Tail Light Conversion Kit
    x
                The 1956 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED conversion kits. 

    These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    1956 Chevy LED Tail Light Conversion Instructions (pdf)

  • 1940 Ford LED Tail Lights
    $119.99
    1940 Ford LED Tail Lights
    x
                

    Complete tail light assembly with very bright and visible LED's for the stop, tail, and turn signal functions. LED's feature a wide viewing angle of 100 degrees as well as cool operation and long life. This led taillight is designed to bolt into a 1940 Ford fender in place of the original taillight.

    Kit Contents: (2) LED complete taillamp assemblies, (4) solderless connectors, (2) LED to car electrical harness, (2) custom molded taillamp to body seal, installation instructions.

    • Bezel re-shaped to fit tightly to fender
    • External screw hole eliminated for cleaner look
    • 14 high intensity LED's per lamp 
    • Rust-proof composite taillamp bucket
    • Stainless steel studs, nuts, and washers
    • Acrylic lens
    • Dual built-in reflectors for lights off safety
    • Chromed plastic bezel
    • Taillamp-to-body gasket seal

    1940 Ford Tail Light Installation Instructions (PDF) 

  • 1941-1948 Chevy LED Tail Light Assembly
    1941-1948 Chevy LED Tail Light Assembly
    x
                

    These powerful bright red LED tail lights are an excellent replacement or addition to your 1941-1948 Chevy passenger car.

    • 39 Super Bright Red LED's
    • Polycarbonate Lens
    • Polished stainless steel housing
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems
     

    1941-1948 Chevy LED Tail Light Installation Instructions (pdf)

  • Technostalgia 6046 1946-1948 Plymouth LED Tail Lights
    Technostalgia 6046 1946-1948 Plymouth LED Tail Lights
    x
                

    These LED tail lights are among the best you will find for your old Plymouth. They feature chrome plated die-cast metal housings with stainless steel mounting studs, nuts and washers. They are a direct replacement with the benefits of LED brightness (14 LED's per light). Simple, clear wiring directions (12 volt only) and includes wiring and even taillight-to-body gaskets.

    • Includes RapidFire brake lights function
    • Brake lights are pulsed rapidly three times within the first 1/2 second of pressing the brake pedal followed by constant ON
    • Cycle is repeated every time the brake pedal is pressed
    • This is a valuable safety feature, but can be overridden at time of installation

     

  • 1934 Ford Commercial Headlights, 12V Halogen, Stock 9-1/2 Inch Diameter
    1934 Ford Commercial Headlights, 12V Halogen, Stock 9-1/2 Inch Diameter
    x
                

    These headlights feature a 12 volt quartz halogen bulb behind an original styled lens. They have a primered 1934 bucket with stainless steel rim. 9-1/2" diameter.

    • 12 volt quartz halogen bulb
    • Primered bucket with stainless steel rim
    • 9-1/2" diameter
    • Uses H-5 bulb

    Note:  These headlights mount and are attached very similar to the 1928 thru 1934 headlights and also the King Bee or Dietz headlights. There is the rounded base with an adjustable slot where a carriage headed bolt passes thru from the inside on the body of the light. The bolt passes through the fender and fender brace or on a fender less car through the headlight stand or mount and has the nut and washer to lock in place. Stud size is .616 and nut size is .901 or 7/8”. Three wires pass through the center of this bolt for hook up to the power source and ground.

  • 1953-1956 Ford Truck Tail Lights, Stainless
    1953-1956 Ford Truck Tail Lights, Stainless
    x
                

    1953-1956 Ford pickup truck tail lights with stainless steel housings. Has an original-style red polycarbonate lens. Wires are modern nylon type with a single 1157 dual-filament bulb per light. For 12 volt systems.

    Choose left or right. Left has provisions for a license plate light.

  • 1949-1950 Chevy Tail Light Red Reflector with Bezel
    1949-1950 Chevy Tail Light Red Reflector with Bezel
    x
                These red tail light reflectors with a stainless steel bezel are for 1949-1950 Chevy passenger car taillights. They replicate those of the original.
    • Red reflector with stainless steel bezel
    • "GUIDE" script
    • Duplicate of original
    • Left or Right Side
    • Fits All Passenger Cars
  • 1930-31 Ford Model A Dropped Headlight Bar, Stainless
    1930-31 Ford Model A Dropped Headlight Bar, Stainless
    x
                

    These dropped style stainless steel headlight bars are for 1930-1931 Fords.  They feature a 4 inch drop and connect fender to fender to support your headlights, just like the originals.  These bars come with a highly polished stainless finish.

    • 1930-31 Fords
    • Top width (flange tip to flange tip) 43"
    • Bottom width (flange tip to flange tip) 38-3/4"
    • 43-1/8" Long
    • OEM # A-13114-BD
    • Highly Polished Stainless Steel 4" Dropped Headlight Bars for Street Rods

    Note: If you intend to use this light bar on your 1930-31 Model "A" using a 1932 grille shell and insert, it will require considerable modification. The 1932 grille insert has a "V" shape, while the 1931 grille does not. The modifications required include cutting, welding, bending and polishing.

  • Stainless Steel Deitz Type 7 Inch Headlight Bucket
    Stainless Steel Deitz Type 7 Inch Headlight Bucket
    x
                
    • Universal application headlight bucket
    • Accepts 7" diameter headlights
    • Polished stainless steel
  • 1938-1939 Ford Red Tail-Stop Lights
    1938-1939 Ford Red Tail-Stop Lights
    x
                

    Polished stainless steel rim taillights for 1938-1939 Ford. These taillights have a glass lens, single 1157 dual-filament bulb, and match the original tail lights closely.

    For 12 volt systems only.

     

  • Ford Model A Cowl Head Light Assembly Kit, 1930-31, Stainless Steel
    Ford Model A Cowl Head Light Assembly Kit, 1930-31, Stainless Steel
    x
                

    These cowl head lights are an exact reproduction model, updated with turn signals. They are for 1930-1931 Model A Fords and include 12 volt bulbs with all wiring and mounting hardware.

    These lights have a dual filament bulb which will serve as park lights and turn signals. They have the original style flat lens and feature stainless steel buckets and chrome arms. 

    If you wish to retain the original style while having the ease and comfort of modern characteristics, then these assemblies are the perfect addition to your street rod project.

    • Stainless steel finish
    • Exact reproduction model, updated with turn signals
    • 12 volt bulbs
    • Dual filament bulb serves as park lights and turn signals
    • Original style flat lens
    • Includes all wiring and mounting hardware
  • Hagan Street Rods fmTD39R-LED 1939 Ford Style Flush Mount LED Tail Lights
    Hagan Street Rods fmTD39R-LED 1939 Ford Style Flush Mount LED Tail Lights
    x
                

    Hagan has made it simple to add a set of flush mount '39 Ford style LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 1/4" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • 1938-1939 Ford Blue Dot Tail-Stop Lights
    1938-1939 Ford Blue Dot Tail-Stop Lights
    x
                

    Polished stainless steel rim taillights for 1938-1939 Ford. These taillights have a blue dot glass lens, single 1157 dual filament bulb, and match the original tail lights closely.

    For 12 volt systems only. Mounting gasket sold separately.

     

Goto Previous PagePrevious Page
1 2 3