Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"stainless steel line kits" Page 1 of 5

  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for for independent rear axles (IRS). Kit includes two 20 foot coils of 3/16" stainless steel line, seventeen -3 AN tube nuts, seventeen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, four -3 AN 18" braided stainless hoses, and three 3/8" bulkhead nuts.

    617-8545 Instructions (PDF)

    NOTE: These kits are de

  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for conventional live axle rear suspensions. Includes a 20 foot coil of 3/16" stainless steel line, nineteen -3 AN tube nuts, nineteen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, three -3 AN 18" braided stainless lines, and three 3/8" bulkhead nuts.

    617-8530 Instructions 

  • Mild Steel -3 AN Brake Line Kit
    Mild Steel -3 AN Brake Line Kit
    x
                

    This brake line kit bridges the gap between our stainless steel -3 AN kit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3 AN fittings to plumb your brake lines. 

    Since we don't know what calipers and master cylinder you will be using, these fittings are sold separately.

     
    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings
  • Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    x
                

    No, this is not just another headlight conduit! This is Lokar's design technology for "U-Cut-to-Fit", non-kinking stainless steel headlight braid. Designed with threaded steel studs to insure that you won't experience any of the typical separation between braid and fitting that shows unsightly wires out in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit comes complete with two 14" flexible braided stainless steel Teflon-lined housings, threaded STEEL studs, billet aluminum fittings, aluminum grill shell washers and four 26" headlight wires.

    • Non-kinking stainless steel
    • Threaded steel studs to insure no separation between braid and fitting
    • Comes complete with:
      • (2)Two 14" flexible braided stainless steel Teflon-lined housings
      • Threaded STEEL studs
      • Billet aluminum fittings
      • Aluminum grill shell washers
      • (4)Four 26" headlight wires
  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • Gotta Show 231104 Ford Transmission Cooler Line Kit
    Gotta Show 231104 Ford Transmission Cooler Line Kit
    x
                

    These kits make it easy to plumb your transmission to your radiator or external transmission cooler. Hose uses aircraft quality TEFLON® inner liner for high temperature and abrasion resistance.

    • 11 ft. braided stainless steel hose with AN 6 female ends
    • Two metal lines to connect to your transmission
    • Two AN 6 female fittings
    • The steel lines have AN6 and 1/4' NPT fittings

    Note: You will need to buy the right adapter fittings to your radiator or transmission cooler.

    Instructions (PDF)

  • Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • Mild Steel 45 Degree Inverted Flare Brake Line Kit
    Mild Steel 45 Degree Inverted Flare Brake Line Kit
    x
                

    You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares.

    This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 AN brake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3 AN male adapters, six 3/8"-24 IFF to 1/8" NPT male bracket adapters, and twenty 3/8"-24 inverted flare nuts.

    Brake System Builder Tip (GIF) 

    Note: Needed in addition to this kit will be the adapters to connect the master cylinder to 3/8"-24 inverted flare brake line and the fittings to connect your calipers (or wheel cylinders) to the -3 AN braided lines.

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • ALU - aluminum fittings with blue hose
    • SS  - aluminum fittings with stainless hose
    • STL - steel fittings with blue hose 
  • Lokar TD-3700FM36 Stainless Steel 700R4 Firewall Mount Trans Dipstick
    Lokar TD-3700FM36 Stainless Steel 700R4 Firewall Mount Trans Dipstick
    x
                

    Braided stainless covered tubing with billet look handle and stainless hardware. Flexible design gives added mounting versatility.

     

    You have flexibility with our Teflon-lined Flexible Braided Stainless 700R4 Transmission Dipstick. This R4 Kit comes complete with braided stainless outer housing and heat resistant E-Z to read flexible inner dipstick measuring cable. Inner cable is molded with appropriate trans fluid levels. Billet aluminum handle and billet aluminum fittings complement Lokar's Flexible Engine Dipsticks. Kit includes dipstick funnel adapter to assist in filling. Designed for "push in" style transmissions. Dipstick seals with double O-rings.  Firewall mount measures 24" in length. 

    This 700R4 dipstick kit comes complete with installation instructions.

     

  • DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Dual Outlet Master Cylinder Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Steel Dual Brake Line Kit
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • T-Bucket Stainless Brake Line Kit
    T-Bucket Stainless Brake Line Kit
    x
                

    Complete your '23 T-Bucket chassis with this pre-bent Stainless Steel brake line kit. Includes all lines, proportioning valve, residual pressure valves, brake pressure switch, fittings, and hardware necessary to properly plumb the brakes on your T.

    Notes: Does not work with '27 T chassis.  Also of note, due to unlimited rear axle brake combinations, this kit will not include rear axle housing brake lines, hoses, or fittings.  The kit will include the AN style brake hose to transfer from the rear crossmember to the housing.  The chassis builder/installer will then need to continue the brake line system from that point on to both rear wheels with necessary brake fitting hardware as needed.

    Due to the different brakes and caliper combinations, this kit will NOT include caliper/wheel cylinder fittings.

    Learn more about the proper uses of residual and proportioning valves and by reading our tech article. Brake System Selection.  

  • US Brake Steel Brake Line Kit
    US Brake Steel Brake Line Kit
    x
                Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines. 
            
  • Gotta Show 231101 GM Transmission Cooler Line Kit
    Gotta Show 231101 GM Transmission Cooler Line Kit
    x
                

    These kits make it easy to plumb your transmission to your radiator or external transmission cooler. Hose uses aircraft quality Teflon® inner liner for high temperature and abrasion resistance.

    • 11 ft. braided stainless steel hose with AN -6 female ends
    • Two metal lines to connect to your transmission
    • Two AN -6 female fittings
    • The steel lines have AN6 and 1/4" NPT fittings

    Note: You will need to buy the right adapter fittings to your radiator or transmission cooler.

    910-31101 Instructions (PDF)

  • Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    x
                

    Lokar's Hi-Tech TH400 Electric Kickdown is cable-operated. Electric switch is housed in a billet aluminum box that mounts with transmission pan bolts.* Kit includes "U-Cut-to-Fit" outer housing in stainless steel. This Turbo 400 kickdown is designed with a specially extruded liner for extended life of the cable, aluminum fittings and stainless steel inner wire and stainless mounting bracket. This design eliminates mounting unsightly electrical switches on carburetor, manifold, or near throttle pedal. Complete installation instructions included in kit.

    Can be mounted in a variety of locations within 48" of carburetor.

  • Lokar HR-1100U Hood Release Cable Kit, Black Housing
    Lokar HR-1100U Hood Release Cable Kit, Black Housing
    x
                

    This kit comes complete with billet aluminum handle assembly and cables. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Hood release kit includes aluminum firewall fittings and cable stop. The outer housing is 18 inches inside the vehicle and 6 feet under the hood. The inner wire is 9 feet long. Requires cable-operated latches.

    • Comes complete with billet aluminum handle assembly and cables
    • Specially extruded liner for extended life of the cable
    • Billet aluminum fittings and stainless steel inner wire
    • Includes aluminum firewall fittings and cable stop
    • Outer housing is 18 inches inside the vehicle and 6 feet under the hood
    • Inner wire is 9 feet long
    • Requires cable-operated latches
  • Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    x
                

    Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts a 1982-1988 T-Bird/Cougar rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.

    The pressure line in this kit has an inverted flare fitting at the pump end along with a 14mm O-ring fitting on the rack end. It also comes with an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pumps 91032922-GM or 910-32908.

    Kit includes:

    • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
    • The fittings that go into the 1982-1988 T-bird rack which are 14mm O-ring (high pressure) and 16mm O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.

     

    910-32535 Instructions (PDF)

    91032535 CPP Instructions (PDF) 

  • Lokar ACA-1807 Ford AOD Adjustable Column Shift Linkage Kit
    Lokar ACA-1807 Ford AOD Adjustable Column Shift Linkage Kit
    x
                
    • Works with GM style factory or aftermarket columns
    • Allows proper ratio adjustment between transmission and indicator on the column
    • Kit includes Lokar AOD Selector Shaft and Arm
    • Kit includes all hardware, including bushings and rod ends
    • "U-Cut-to-Fit" stainless steel connecting rod
    • Stainless steel connecting rod can be bent for clearance around some obstacles
    • No threading necessary
    • All steel parts are zinc plated
    • AOD Selector Shaft and Arm also available separately (shown below)

    Note:  If you don't have a direct line of sight between the column shift arm and the transmission shift arm, consider using a column cable shift linkage.

  • Speedway -3 AN Universal Racing Brake Line System
    Speedway -3 AN Universal Racing Brake Line System
    x
                Kit includes everything you need to plumb any type of race car from master cylinder to caliper.

    Includes:
    • (2) -3 AN 19" Stainless Steel braided brake lines with 90 deg. end
    • (2) -3 AN 26" Stainless Steel braided brake lines with 90 deg. end
    • (4) Aluminum 3/8"-24 to -3 AN bulkhead frame fittings
    • (3) 8" long 3/16" steel brake lines
    • (3) 20" long 3/16" steel brake lines
    • (3) 40" long 3/16" steel brake lines
    • (4) Removable brake line tabs
    • (4) 3/8"-24 brass unions
    • (2) 3/8"-24 IFF "T" fittings
    • (10) Insulated line clamps
    Note: For off-road use only
  • Speedway -4 AN Universal Racing Brake Line System
    Speedway -4 AN Universal Racing Brake Line System
    x
                Kit includes everything you need to plumb any type of race car from master cylinder to caliper.

    Includes:
    • (2) -4 AN 19" Stainless Steel braided brake lines with 90 deg. end
    • (2) -4 AN 26" Stainless Steel braided brake lines with 90 deg. end
    • (4) Aluminum 3/8"-24 to -4 AN bulkhead frame fittings
    • (3) 8" long 3/16" steel brake lines
    • (3) 20" long 3/16" steel brake lines
    • (3) 40" long 3/16" steel brake lines
    • (4) Removable brake line tabs
    • (4) 3/8"-24 brass unions
    • (2) 3/8"-24 IFF "T" fittings
    • (10) Insulated line clamps
    Note: For off-road use only
  • DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Lokar Hi-Tech Stainless Throttle Cable Kit
    Lokar Hi-Tech Stainless Throttle Cable Kit
    x
                

    Lokar Hi-Tech Braided Stainless Steel Throttle Cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

    Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

  • Two Plain 9 Super 7   Carbs, Edelbrock 1103 Slingshot Intake, 1938-48 Ford V8
    Two Plain 9 Super 7 Carbs, Edelbrock 1103 Slingshot Intake, 1938-48 Ford V8
    x
                Please view the product's page for more information
            
  • Stainless Steel-Flex Vacuum Hose With Ends
    Stainless Steel-Flex Vacuum Hose With Ends
    x
                
    • Stainless Steel-Flex vacuum hose kit
    • 304 stainless steel flex hose construction
    • Easy to cut for custom installation
    • Includes 3 feet of hose & 2 Anodized clamps
  • T56 Hydraulic Clutch Line Kit, 48 Inch
    T56 Hydraulic Clutch Line Kit, 48 Inch
    x
                

    You have finally found that T56 6-speed to put behind your Chevy V-8 and now are ready to hook up the release bearing. We have this neat kit that allows you to hook it up to a common Wilwood master cylinder. Our AN3 braided stainless steel hose is available in three lengths: 25", 36" and 48" lengths.

    You will also want to buy the banjo fitting kits and the Wilwood master cylinder.

    NOTE: These lines are for Corvette and GTO specific T56 six-speeds only. Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.

  • Speedway Carter Fuel Pump Fuel Line Kit
    Speedway Carter Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • Alu - aluminum fittings with stainless hose
    • Ss - aluminum fittings with blue hose
    • Stl - steel fittings with blue hose
  • Speedway Edelbrock Mechanical Fuel Pump Fuel Line Kit
    Speedway Edelbrock Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • Alu - aluminum fittings with blue rubber hose
    • Ss - aluminum fittings with stainless steel hose
    • Stl - steel fittings with blue rubber hose
  • Goodridge 12212 1969-76 GM Midsize Braided Stainless Brake Hose Kit
    Goodridge 12212 1969-76 GM Midsize Braided Stainless Brake Hose Kit
    x
                

    This DOT certified brake line kit is designed to be a bolt-in for 1969-1976 GM midsize cars with original single piston front calipers and rear drum brakes. The kit includes two 16" front and one 14" rear stainless steel braided brake hoses, two banjo bolts and washers.

    Two 16" front lines with 7/16" banjos on one end and 3/8-24 IFF on the "frame" end.

    Banjo bolts and crush washers are included. 

    One 14" line for the rear axle with 7/16-24 IFF on the "frame" end, and a handy "block" on the axle end. The "block" has 3/8-24 IFF on two sides, and a 7/16" hole on top so that it can be bolted to the rear axle.
  • Three Plain 9 Super 7   Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    Three Plain 9 Super 7 Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both prima

  • Lokar XTD-3350400FM TH350-TH400 Midnight Series Transmission Dipstick
    Lokar XTD-3350400FM TH350-TH400 Midnight Series Transmission Dipstick
    x
                You have flexibility with our Teflon-lined Flexible Braided Stainless Turbo 350 or Turbo 400 Transmission Dipstick.  Kit comes complete with braided   stainless outer housing and heat resistant E-Z to read flexible inner   dipstick measuring cable.  Inner cable is molded with appropriate trans   fluid levels.  Billet aluminum handle and billet aluminum fittings   complement Lokar's Flexible Engine Dipsticks. This Turbo 350 or Turbo 400 transmission dipstick kit includes dipstick   funnel adapter to assist in filling.            Designed for "push in"  style transmissions.  Dipstick seals  with double            O-rings.   Kit comes complete with installation instructions. For TH350 or TH400 transmission application.
            
  • Lokar EC-81FHT Stainless Wilwood Style Rear Disc Emergency Brake Cable
    Lokar EC-81FHT Stainless Wilwood Style Rear Disc Emergency Brake Cable
    x
                Please view the product's page for more information
            
  • T56 Hydraulic Clutch Line Kit, 25 Inch
    T56 Hydraulic Clutch Line Kit, 25 Inch
    x
                

    You have finally found that T56 6-speed to put behind your Chevy V-8 and now are ready to hook up the release bearing. We have this neat kit that allows you to hook it up to a common Wilwood master cylinder. Our AN3 braided stainless steel hose is available in three lengths: 25", 36" and 48" lengths.

    You will also want to buy the banjo fitting kits and the Wilwood master cylinder.

    NOTE: These lines are for Corvette and GTO specific T56 six-speeds only. Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.

  • T56 Hydraulic Clutch Line Kit, 36 Inch
    T56 Hydraulic Clutch Line Kit, 36 Inch
    x
                

    You have finally found that T56 6-speed to put behind your Chevy V-8 and now are ready to hook up the release bearing. We have this neat kit that allows you to hook it up to a common Wilwood master cylinder. Our AN3 braided stainless steel hose is available in three lengths: 25", 36" and 48" lengths.

    You will also want to buy the banjo fitting kits and the Wilwood master cylinder.

    NOTE: These lines are for Corvette and GTO specific T56 six-speeds only. Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.

  • Lokar XKD-2AODHT Black Hi-Tech Ford AOD Kickdown Cable Kit
    Lokar XKD-2AODHT Black Hi-Tech Ford AOD Kickdown Cable Kit
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech Kickdown Cables are available in black stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount these kickdowns with Lokar's stainless steel carburetor bracket and return springs (sold separately). Complete instructions included in kit.

    • Ford AOD transmission applications
    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included in kit

    Throttle Body and Carb End Fittings Guide (Link)

  • Lokar XKD-2700HT 700R4 GM Hi-Tech Kickdown Cable Kit, Black
    Lokar XKD-2700HT 700R4 GM Hi-Tech Kickdown Cable Kit, Black
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech 700R4 Kickdown Cables are available in black stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount these kickdowns with Lokar's stainless steel carburetor bracket and return springs (sold separately). Complete instructions included in kit.

    • GM 700-R4 applications
    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included in kit

    Throttle Body and Carb End Fittings Guide (Link)

    49102700 Installation Instructions (PDF) 

  • Lokar KD-20C6HT Ford C6 Hi-Tech Kickdown Cable Kit-Stainless Housing
    Lokar KD-20C6HT Ford C6 Hi-Tech Kickdown Cable Kit-Stainless Housing
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech Ford C6 Kickdown Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. These C6 transmission kickdowns feature a stainless steel braided housing and aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems.  Complete instructions included in kit.

    • For Ford C6 applications
    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included

    Throttle Body and Carb End Fittings Guide (Link)

    49102060 Installation Instructions (PDF)

     

  • Lokar XKD-2350HT GM TH350 Hi-Tech Kickdown Cable Kit, Black
    Lokar XKD-2350HT GM TH350 Hi-Tech Kickdown Cable Kit, Black
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech Turbo 350 Kickdown Cables are available in black stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount these kickdowns with Lokar's stainless steel carburetor bracket and return springs (sold separately). Complete instructions included in kit.

    • GM TH-350 applications
    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included in kit

    Throttle Body and Carb End Fittings Guide (Link)

    49103250 Installation Instructions (PDF) 

Goto Previous PagePrevious Page
1 2 3 4 5