Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"stainless steel billet" Page 1 of 4

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    x
                

    No, this is not just another headlight conduit! This is Lokar's design technology for "U-Cut-to-Fit", non-kinking stainless steel headlight braid. Designed with threaded steel studs to insure that you won't experience any of the typical separation between braid and fitting that shows unsightly wires out in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit comes complete with two 14" flexible braided stainless steel Teflon-lined housings, threaded STEEL studs, billet aluminum fittings, aluminum grill shell washers and four 26" headlight wires.

    • Non-kinking stainless steel
    • Threaded steel studs to insure no separation between braid and fitting
    • Comes complete with:
      • (2)Two 14" flexible braided stainless steel Teflon-lined housings
      • Threaded STEEL studs
      • Billet aluminum fittings
      • Aluminum grill shell washers
      • (4)Four 26" headlight wires
  • Lokar TD-3700FM36 Stainless Steel 700R4 Firewall Mount Trans Dipstick
    Lokar TD-3700FM36 Stainless Steel 700R4 Firewall Mount Trans Dipstick
    x
                

    Braided stainless covered tubing with billet look handle and stainless hardware. Flexible design gives added mounting versatility.

     

    You have flexibility with our Teflon-lined Flexible Braided Stainless 700R4 Transmission Dipstick. This R4 Kit comes complete with braided stainless outer housing and heat resistant E-Z to read flexible inner dipstick measuring cable. Inner cable is molded with appropriate trans fluid levels. Billet aluminum handle and billet aluminum fittings complement Lokar's Flexible Engine Dipsticks. Kit includes dipstick funnel adapter to assist in filling. Designed for "push in" style transmissions. Dipstick seals with double O-rings.  Firewall mount measures 24" in length. 

    This 700R4 dipstick kit comes complete with installation instructions.

     

  • EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    x
                

    These fuel tank caps are designed for use with EMPI's stainless gas tanks but will work great with nearly any style filler neck.  They feature billet aluminum construction and add a perfect shine to top off your fuel tank.

    • For EMPI stainless steel fuel tanks
    • Rigid edge design for a sure grip
    • Billet aluminum
    • Sold each
  • Billet FM2221PC BBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2221PC BBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Billet FM2222PC B/B Chevy Mid Mount Serpentine Conversion Kit Press-On
    Billet FM2222PC B/B Chevy Mid Mount Serpentine Conversion Kit Press-On
    x
                Please view the product's page for more information
            
  • Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    x
                Please view the product's page for more information
            
  • Aeromotive 11209 High Output Billet Electric Fuel Pump, 7 PSI
    Aeromotive 11209 High Output Billet Electric Fuel Pump, 7 PSI
    x
                

    This is the new standard in 12-volt electric fuel pumps. This pump boasts a high-quality billet aluminum body and pumping mechanism that feature Aeromotive's proprietary composite rotors, stainless steel vanes and precious-ground, heat-treated steel plates. The black pump has a flow volume exceeding 90 GPH and is internally regulated to 7 psi, making it ideal for carbureted street applications up to 600 horse power. Has a polished body that look great on any street rod or race car.

    • Durable billet construction
    • Fuel flow exceeds 90 GPH at 5 PSI and draws less than 5 amps.
    • Internally regulated to 7 PSI
    • Eliminates the need for a separate regulator on most carburetors
    • Rated for continuous duty
    • Pumping mechanism features a composite rotor, stainless steel vanes and heat treated steel top and bottom plates for durability
    • 3/8” NPT inlet and outlet ports
  • EMPI 16-3536 Billet Aluminum 8 Inch Diameter Fuel Tank Mount, Pair
    EMPI 16-3536 Billet Aluminum 8 Inch Diameter Fuel Tank Mount, Pair
    x
                

    These polished billet aluminum gas tank mounts from EMPI feature a polished stainless steel strap and milled horizontal lines that match EMPI's other billet accessories.

    • Polished billet aluminum mount
    • Stainless steel straps
    • 8" diameter
    • Hardware included
    • Sold as a pair
  • Aeromotive 11203 SS Series Red High Output Billet Fuel Pump
    Aeromotive 11203 SS Series Red High Output Billet Fuel Pump
    x
                

    This is the new standard in 12-volt electric fuel pumps. This high flow fuel pump boasts a high-quality billet aluminum body and pumping mechanism that feature Aeromotive's proprietary composite rotors, stainless steel vanes and precious-ground, heat-treated steel plates.

    The red version is for street/strip or mild racing applications and flows more than 140 GPH with 18-20 psi of pressure and will need an external regulator.

    Has a polished body that looks great on any street rod or race car.

    • P/N 910-11203 features 3/8” NPT inlet and outlet ports.
    • Perfect for use with a Bypass Regulator (P/N 910-12804).
    • Fuel flow exceeds 140 GPH at 13.5 volts.
    • Pump provides 14 PSI fuel pressure – perfect for cars that leave hard.
    • Pumping mechanism features our proprietary composite rotor, stainless steel vanes and precision ground, heat treated steel plates.
    • Ideal for dedicated nitrous delivery.
    • Alcohol compatible.
    • Low current draw. (under 5 amps)

     

  • Lokar HR-1100U Hood Release Cable Kit, Black Housing
    Lokar HR-1100U Hood Release Cable Kit, Black Housing
    x
                

    This kit comes complete with billet aluminum handle assembly and cables. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Hood release kit includes aluminum firewall fittings and cable stop. The outer housing is 18 inches inside the vehicle and 6 feet under the hood. The inner wire is 9 feet long. Requires cable-operated latches.

    • Comes complete with billet aluminum handle assembly and cables
    • Specially extruded liner for extended life of the cable
    • Billet aluminum fittings and stainless steel inner wire
    • Includes aluminum firewall fittings and cable stop
    • Outer housing is 18 inches inside the vehicle and 6 feet under the hood
    • Inner wire is 9 feet long
    • Requires cable-operated latches
  • 13 Inch Stainless Steel Expansion Tank
    13 Inch Stainless Steel Expansion Tank
    x
                

    2" outside diameter, 1⁄4" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-on cap.

    • Heavy wall construction
    • Billet screw in cap
    • Clear neoprene seal

    911-02213 Instructions (PDF)

  • EMPI 16-3537 Replacement Fuel Tank Mounting Bracket, 10 Inch Diameter, Pair
    EMPI 16-3537 Replacement Fuel Tank Mounting Bracket, 10 Inch Diameter, Pair
    x
                

    These polished billet aluminum gas tank mounts from EMPI feature a polished stainless steel strap and milled horizontal lines that match EMPI's other billet accessories.

    • Polished billet aluminum mount
    • Stainless steel straps
    • 10" diameter
    • Hardware included
    • Sold as a pair
  • Lokar 6098 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    Lokar 6098 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect.  Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket.  Mounts in multiple positions for floor and toe board angles.  Designed with built-in pedal travel stops.   Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Order 48" cable for LS1, Ramjet and Vortec applications.

    • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
    • Mounts in multiple positions for floor and toe board angles
    • Designed with built-in pedal travel stops
    • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
    • Pedal pad is 2” by 6-3/4”
    • Pad is parallelogram in shape and NOT rectangle
    • Brushed billet aluminum finish

    Eliminator Throttle Pedal Installation Instructions (PDF)

     

  • Lokar 6097 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    Lokar 6097 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Throttle Floor Mount Pedal is designed with the signature Lokar quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops.

    • Recipient of NSRA best new product
    • Eliminates routing cables through firewall
    • Billet aluminum splined adjustable shaft
    • Stainless steel "under-the-floor" cable mounting bracket
    • Mounts in multiple positions
    • Built-in pedal travel stops

    Note: These throttle pedals require 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications. Order 48" cable for LS1 Ramjet and Vortec applications.

  • Lokar XFMG-6098 Billet Aluminum Eliminator Floor Mount Throttle Pedal
    Lokar XFMG-6098 Billet Aluminum Eliminator Floor Mount Throttle Pedal
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops. Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Use 48" cable for LS1, Ramjet and Vortec applications.

    • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
    • Mounts in multiple positions for floor and toe board angles
    • Designed with built-in pedal travel stops
    • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
    • Black finish

    Eliminator Throttle Pedal Installation Instructions (PDF)

  • Lokar XTD-3350400FM TH350-TH400 Midnight Series Transmission Dipstick
    Lokar XTD-3350400FM TH350-TH400 Midnight Series Transmission Dipstick
    x
                You have flexibility with our Teflon-lined Flexible Braided Stainless Turbo 350 or Turbo 400 Transmission Dipstick.  Kit comes complete with braided   stainless outer housing and heat resistant E-Z to read flexible inner   dipstick measuring cable.  Inner cable is molded with appropriate trans   fluid levels.  Billet aluminum handle and billet aluminum fittings   complement Lokar's Flexible Engine Dipsticks. This Turbo 350 or Turbo 400 transmission dipstick kit includes dipstick   funnel adapter to assist in filling.            Designed for "push in"  style transmissions.  Dipstick seals  with double            O-rings.   Kit comes complete with installation instructions. For TH350 or TH400 transmission application.
            
  • Wilwood Midget Inboard Brake Kit
    Wilwood Midget Inboard Brake Kit
    x
                

    .350" x 10.50" drilled steel rotor. 31-spline axle hub for use with all 6" on 5 1/2" bolt circle rotors. Dynalite caliper and pads.

    The Billet Dynalite caliper is powerful, compact and super lightweight. Advanced computer engineering keeps this caliper extremely rigid, resulting in incredible brake torque at a bare minimum in weight, starting at 2.66 pounds. Internal fluid crossover eliminates external tubes and the four position, two-piece bleed screws allow for convenient mounting and easy bleeding. The Billet Dynalite uses standard quick change Dynalite pads, deep cup stainless steel pistons and high temperature seals, and has a black anodized finish. The time proven Dynalite caliper design is stronger and lighter than ever - ideal for Late Models, Modifieds, Sprints, Road Racers and Dragsters.

    Wilwood's steel rotors have applications in all types of motorsports. Weighing in at 4.7 lbs these steel rotors provide a durable lightweight option in applications where sustained temperatures remain in the low to moderate range, and high heat spikes are only observed on an intermittent basis. With their 6" on 5 1/2" bolt centers these rotors can stop anything from a hard stopping drag race car at the end of a quarter mile, or a high speed stock car coming in from a qualifier at a super speedway. Steel rotors can also be found in lighter weight open wheel cars such as sprints and modifieds, and a variety of light weight, open

  • Wilwood 120-9689 Billet Dyna Pro Single Caliper, 3-3/4 Inch Mount
    Wilwood 120-9689 Billet Dyna Pro Single Caliper, 3-3/4 Inch Mount
    x
                

    The Dyna Pro Single (DPS) billet caliper is the newest generation of calipers available as an upgrade or replacement for applications previously using the Dynalite Single (DLS) series. DPS calipers combine superior strength with performance enhancements to make these the best "Dyna" series calipers ever.

    The DPS is loaded with exclusive Wilwood performance enhancements. The calipers feature Quick-E-Clip pad retainers that support a 6812 type brake pad from the top. In addition to past pad service without caliper removal, the feature provides substantially stronger retention over the single Quick-Clip pin and 7012 type pads used in the previous DLS models.

    • Quick-E-Clip pad retainers supports brake pad from top
    • Heavy wall stainless steel pistons
    • Stainless steel SRS bridge plates eliminate pad rattle and dampen vibration
    • Internal fluid passages
    • Four corner bleed screws allow mounting in any front, rear, left, or right side position

     

  • Wilwood Sprint Right Rear Brake Kit
    Wilwood Sprint Right Rear Brake Kit
    x
                Please view the product's page for more information
            
  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Single Billet A/C Vent, 30 Degree Bezel
    Single Billet A/C Vent, 30 Degree Bezel
    x
                

    Give your dash some class with these distinctive oval-shaped A/C vents. They feature machined billet aluminum bezels with stainless steel vents for easy upkeep. Features a single outlet vent and a 30-degree angle-cut bezel.

    Vents accept standard 2-1/2" A/C hoses and include brackets and templates. Bezel measures 4-1/8" x 1-3/4".

  • Speedway Adjustable Ring Compressor
    Speedway Adjustable Ring Compressor
    x
                

    Tapered inner face. Hard anodized billet aluminum.

    Made extra deep with stainless steel adjusting straps for years of dependable service.

    Available in three sizes: 4.000-4.090 bore, 4.125-4.215 bore and 4.250-4.375 bore.

    Ring Style Chart (GIF)

  • Lokar XTD-3700FM 700R4 Midnight Series Firewall Transmission Dipstick
    Lokar XTD-3700FM 700R4 Midnight Series Firewall Transmission Dipstick
    x
                You have flexibility with our Teflon-lined Flexible Braided Stainless 700R4 Transmission Dipstick.  Kit comes complete with braided  stainless outer housing and heat resistant E-Z to read flexible inner  dipstick measuring cable.  Inner cable is molded with appropriate trans  fluid levels.  Billet aluminum handle and billet aluminum fittings  complement Lokar's Flexible Engine Dipsticks.  Kit includes dipstick  funnel adapter to assist in filling. This dipstick seals  with double            O-rings.  Kit comes complete with  installation instructions.  Call for information on custom lengths and  applications. 
    • Flexible, heat-resistant PTFE rod with a black
    • Braided stainless steel cover
    • Inner rod is stamped with appropriate trans-fluid levels
    • Outer housing has a slim design that allows for mounting inside of the headers
    • Firewall-mount
    • Funnel adapter is included for easy filling
    • Works with GM 700R-4 transmission
  • Lokar HR-1100HT Hood Release Cable Kit, Stainless Housing
    Lokar HR-1100HT Hood Release Cable Kit, Stainless Housing
    x
                

    This kit comes complete with billet aluminum handle assembly and cables. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Hood release kit includes aluminum firewall fittings and cable stop. The outer housing is 18 inches inside the vehicle and 6 feet under the hood. The inner wire is 9 feet long. Requires cable-operated latches.

    • Comes complete with billet aluminum handle assembly and cables
    • Specially extruded liner for extended life of the cable
    • Billet aluminum fittings and stainless steel inner wire
    • Includes aluminum firewall fittings and cable stop
    • Outer housing is 18 inches inside the vehicle and 6 feet under the hood
    • Inner wire is 9 feet long
    • Requires cable-operated latches
  • 15 Inch Stainless Steel Expansion Tank
    $32.99
    $34.99
    Product Rating: 4.71 Stars
    15 Inch Stainless Steel Expansion Tank
    x
                

    2" outside diameter, 1⁄4" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-off cap.

    • Heavy wall construction
    • Billet screw in cap
    • Clear neoprene seal

    911-02215 Instructions (PDF)

  • Wilwood 120-4062 Dynalite Single Caliper, Billet 2 Piston
    Wilwood 120-4062 Dynalite Single Caliper, Billet 2 Piston
    x
                

    Wilwood’s Billet Dynalite Single utilizes close tolerance design and manufacturing techniques which results in the most rigid, lightweight and attractive caliper in the evolution of the Dynalite Single Series. Starting at 1.58 pounds, the Billet Dynalite Single is perfect for compact high performance braking as required in Open Wheel, Drag, Modified, Kart, Motorcycle and Off Road applications.

    • Lightweight, compact design with two stainless steel 1-3/4" pistons
    • Use with .38" rotors
    • Has 3-1/4" mount centers
    • Uses "Single Quick-Change" style pads

    Wilwood Dynalite Dimensions (Link)

  • Lokar TR-1200U Trunk Release Cable Kit, Black Housing
    Lokar TR-1200U Trunk Release Cable Kit, Black Housing
    x
                

    Kit comes complete with billet aluminum handle assembly and cables. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Trunk release kit includes cable stop and 15 feet of outer housing and 16 feet of inner wire. Requires cable-operated latches.

    • Billet aluminum handle
    • Specially extruded liner for extended life
    • Billet aluminum fittings
    • Stainless steel inner wire
    • Requires cable-operated latches
    • Includes:
      • cable stop
      • 15 feet of outer housing
      • 16 feet of inner wire
  • 17 Inch Stainless Steel Expansion Tank
    17 Inch Stainless Steel Expansion Tank
    x
                

    2" outside diameter, 1/4" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-off cap.

    • Heavy wall construction 
    • Billet screw in cap
    • Clear neoprene seal

    911-02217 Instructions (PDF)

    Learn more about cooling with recovery systems and how they work by reading our tech article. Cooling System Principles.   

  • 19 Inch Stainless Steel Expansion Tank
    $36.99
    $39.99
    Product Rating: 5.00 Stars
    19 Inch Stainless Steel Expansion Tank
    x
                

    2" outside diameter, 1⁄4" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-off cap.

    • Heavy Wall
    • Billet Screw in Cap
    • Clear Neoprene Seal

    Expansion Tank Installation Instructions (PDF)

    Learn more about cooling with recovery systems and how they work by reading our tech article. Cooling System Principles.   

  • Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    x
                

    Lokar's Hi-Tech TH400 Electric Kickdown is cable-operated. Electric switch is housed in a billet aluminum box that mounts with transmission pan bolts.* Kit includes "U-Cut-to-Fit" outer housing in stainless steel. This Turbo 400 kickdown is designed with a specially extruded liner for extended life of the cable, aluminum fittings and stainless steel inner wire and stainless mounting bracket. This design eliminates mounting unsightly electrical switches on carburetor, manifold, or near throttle pedal. Complete installation instructions included in kit.

    Can be mounted in a variety of locations within 48" of carburetor.

  • Wilwood 120-10188 Billet Dyna Pro Single Caliper, 3-1/4 Inch Mount
    Wilwood 120-10188 Billet Dyna Pro Single Caliper, 3-1/4 Inch Mount
    x
                

    The Dyna Pro Single (DPS) billet caliper is the newest generation of calipers available as an upgrade or replacement for applications previously using the Dynalite Single (DLS) series. DPS calipers combine superior strength with performance enhancements to make these the best "Dyna" series calipers ever.

    The DPS is loaded with exclusive Wilwood performance enhancements. The calipers feature Quick-E-Clip pad retainers that support a 6812 type brake pad from the top. In addition to past pad service without caliper removal, the feature provides substantially stronger retention over the single Quick-Clip pin and 7012 type pads used in the previous DLS models.

    • Quick-E-Clip pad retainers supports brake pad from top
    • Heavy wall stainless steel pistons
    • Stainless steel SRS bridge plates eliminate pad rattle and dampen vibration
    • Internal fluid passages
    • Four corner bleed screws allow mounting in any front, rear, left, or right side position

    835-12010188 Specs (Link)

Goto Previous PagePrevious Page
1 2 3 4