Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"stainless steel 1 hose" Page 1 of 9

  • Flexible Radiator Hose Kit, 24 Inch
    From: $69.99
    Product Rating: 3.67 Stars
    Flexible Radiator Hose Kit, 24 Inch
    x
                

    Flexible stainless steel radiator hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kit includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • 1928-1931 Ford Model A Stainless Tail Lights
    1928-1931 Ford Model A Stainless Tail Lights
    x
                

    Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

    • 3.851" diameter
    • 3" depth
    • 3.851" height
    • 1-3/4" mount 

    Wire colors:

    • Housing - Ground
    • Tail - Black
    • Stop - Green

    These tail lights have two bulbs in them that are of a single filament style. 

  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    x
                Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal.

    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.

    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.

    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with paintable stainless steel housings.
    • 30" long
    • Beautiful Art-Deco styling
    • Paintable Stainless steel
    • Turn signal, hazard light and horn functions
  • Hot Rod Nostalgia Steering Column, 30 Inch, Polished Stainless Steel
    Hot Rod Nostalgia Steering Column, 30 Inch, Polished Stainless Steel
    x
                Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal.

    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.

    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.

    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with polished or paintable stainless steel housings.
    • Fits 1969-1994 GM Steering Weel
    • Fits Grant Wheel with Adapter for 1969-1994 GM Steering Wheel
    • 30" long
    • Beautiful Art-Deco styling
    • Polished Stainless steel
    • Turn signal, hazard light and horn functions
  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for for independent rear axles (IRS). Kit includes two 20 foot coils of 3/16" stainless steel line, seventeen -3 AN tube nuts, seventeen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, four -3 AN 18" braided stainless hoses, and three 3/8" bulkhead nuts.

    617-8545 Instructions (PDF)

    NOTE: These kits are de

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 1-1/8 Inch ID, -20 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 1-1/8 Inch ID, -20 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 500 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for conventional live axle rear suspensions. Includes a 20 foot coil of 3/16" stainless steel line, nineteen -3 AN tube nuts, nineteen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, three -3 AN 18" braided stainless lines, and three 3/8" bulkhead nuts.

    617-8530 Instructions 

  • Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    x
                These steel braided front brake lines are 19" overall length. They are for common 1978-1988 GM metric style calipers and include 10mm x 1.5 banjo fittings for one end and have 3/8"-24 inverted flare female on the other. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
            
  • Aeroquip Stainless Steel Braided Low Pressure Hose, 1.340 Inch ID, AN24
    Aeroquip Stainless Steel Braided Low Pressure Hose, 1.340 Inch ID, AN24
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 50 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 1-13/16 Inch ID, AN32
    Aeroquip Stainless Steel Braided Low Pressure Hose, 1-13/16 Inch ID, AN32
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 50 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • AIRAID 9406 Stainless Steel #64 Hose Clamp, 3-1/2 Inch - 4-3/8 Inch
    AIRAID 9406 Stainless Steel #64 Hose Clamp, 3-1/2 Inch - 4-3/8 Inch
    x
                

    Use these stainless steel tube clamps to secure your large diameter air hoses and interior heating duct.  Clamps over 3-1/2" - 4-7/8" O.D. hose.

    • Quick and easy-to-use
    • Stainless steel construction
    • Secures 3-1/2" - 4-7/8" hoses
    • Size #64
  • Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race fuel line applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBC0300 -3 AN TFE Braided High Pressure Hose, 1/8 Inch ID
    Aeroquip FBC0300 -3 AN TFE Braided High Pressure Hose, 1/8 Inch ID
    x
                

    Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Sold by the foot and use with either crimp or reusable fittings to make your own custom power steering line.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Stainless Braided Hose Cover, 3/4 to 1-1/4 Inch O.D.
    Stainless Braided Hose Cover, 3/4 to 1-1/4 Inch O.D.
    x
                

    Use in conjunction with Tube Seal™ Hose Ends. Duplicates the appearance of far more expensive stainless steel braided hose and fittings. Fits over 3/4" - 1-1/4" O.D. hose.

    Sold in 6 ft. sleeves.

    Note: Coverage may vary on diameter on hose. 6 ft. of sleeving typically covers 4 ft of hose.

  • Aeroquip FBU0600 Starlite Hose, -6 AN
    Aeroquip FBU0600 Starlite Hose, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Ford 9 Inch with 4-Link Assembly for Speedway 32 Ford Frame
    Ford 9 Inch with 4-Link Assembly for Speedway 32 Ford Frame
    x
                

    Triangulated 4-link rear suspension kit, including a Ford 9" rear end, specifically for the Speedway '32 Ford Boxed Truss frame 916-57050. This kit is a true bolt-in into our '32 Ford frame - no welding required. We suggest QA1 Adjustable rear coilovers 721-485 (at right) with 225 pound springs for this kit.

    • New 56" flange-to-flange Ford 9" housing with attached bracketry
    • New 31-spline high performance induction heat treated forged alloy steel axles
    • 3/4" 4-link bars (choose plain steel or polished stainless)
    • 4-bar rod ends with nylon bushings (polished stainless only)

     

    Triangulated Rear 4-Bar Installation Instructions (PDF) (Note: All axle brackets come welded to the housing - disregard welding requirements in instructions as it has already been completed.)

  • Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    • -10 AN - 9/16"
    • Up to 45% lighter than stainless steel braided hose
    • Working temperature is -45 Degree F to +300 Degree F
    • Can be used with either crimp style or reusable hose fittings

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Gotta Show 231104 Ford Transmission Cooler Line Kit
    Gotta Show 231104 Ford Transmission Cooler Line Kit
    x
                

    These kits make it easy to plumb your transmission to your radiator or external transmission cooler. Hose uses aircraft quality TEFLON® inner liner for high temperature and abrasion resistance.

    • 11 ft. braided stainless steel hose with AN 6 female ends
    • Two metal lines to connect to your transmission
    • Two AN 6 female fittings
    • The steel lines have AN6 and 1/4' NPT fittings

    Note: You will need to buy the right adapter fittings to your radiator or transmission cooler.

    Instructions (PDF)

  • Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 15 super bright red LED's
    • Lens is 1/2" by 4"
    • Comes with T bolts to hold housing in place
  • Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 30 super bright red LED's
    • Lens is 1/2" by 8"
    • Comes with T bolts to hold housing in place
  • Hagan Street Rods 6-3RDLED 6 Inch Flush-Fit Third Brake Light
    Hagan Street Rods 6-3RDLED 6 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 20 super bright red LED's
    • Lens is 1/2" by 6"
    • Comes with T bolts to hold housing in place
  • Aeroquip Stainless Steel Braided Low Pressure Hose, 11/16 Inch ID, -12 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 11/16 Inch ID, -12 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • 1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    x
                

    Dress up your flathead by replacing your original cylinder head-to-radiator hoses with these stainless or chrome plated pieces. Each radiator hose dress kit replaces both upper hoses on a flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps. This is a quick and easy way to add some sparkle to your engine compartment.

    • Available with polished stainless steel or quality chrome-plated tubes
    • Strong three-ply rubber hose connectors
    • Attractive stainless steel hose clamps
    • Easy installation
  • Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    x
                

    Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 1-1/2" to 2" wide.

    Sold in pairs.

  • Steel 1/8 Inch NPT Branch Tee Adapter Fitting
    Steel 1/8 Inch NPT Branch Tee Adapter Fitting
    x
                

    Sometimes you just can't seem to find the right fitting for the job. These steel fittings have 1/8" NPT threads and allow you to plumb things the best way.  These bulkhead tee adapter fittings are manufactured from zinc finished steel to exacting standards for tight, leak-free connections. Plumb your racer like a pro with our bulkhead tee adapter fittings.

    • 1/8" NPT
    • Stainless Steel
    • 1/8" NPT Female Tee with 1/8" Male NPT thread centered
  • Aeroquip FCC0320 -3 AN TFE Braided Racing Hose, 1/8 Inch ID, 20 Ft
    Aeroquip FCC0320 -3 AN TFE Braided Racing Hose, 1/8 Inch ID, 20 Ft
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCC0315 -3 AN TFE Braided Racing Hose, 1/8 Inch ID, 15 Ft
    Aeroquip FCC0315 -3 AN TFE Braided Racing Hose, 1/8 Inch ID, 15 Ft
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCC0310 -3 AN TFE Braided Racing Hose, 1/8 Inch ID, 10 Ft
    Aeroquip FCC0310 -3 AN TFE Braided Racing Hose, 1/8 Inch ID, 10 Ft
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCC0303 -3 AN TFE Braided High Pressure Hose-1/8 Inch ID-3 Ft
    Aeroquip FCC0303 -3 AN TFE Braided High Pressure Hose-1/8 Inch ID-3 Ft
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCC0306 -3 AN TFE Braided High Pressure Hose-1/8 Inch ID-6 Ft
    Aeroquip FCC0306 -3 AN TFE Braided High Pressure Hose-1/8 Inch ID-6 Ft
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • GoPro AHDRH-001 Waterproof Replacement HD Housing for Hero 2 Camera
    GoPro AHDRH-001 Waterproof Replacement HD Housing for Hero 2 Camera
    x
                

    These replacement housings for your HD HERO or HD HERO2 camera are waterproof up to 180 ft/60 meters.

    Compatible with ALL HD HERO Original + HD HERO2 Professional Cameras

    What's Included:

    • (1) Shockproof/Waterproof Quick-Release HD Housing
    • (1) Horizontal Surface Quick-Release Buckle
    • Warranty: One Year
    Specs:
    • Construction: Polycarbonate
    • Hardware: Stainless steel nuts and bolts
    • Overall Width: 3"
    • Overall Height: 3-1/4"
  • Stainless Braided Radiator Hose Cover, 1-1/4 to 1-5/8 Inch O.D.
    Stainless Braided Radiator Hose Cover, 1-1/4 to 1-5/8 Inch O.D.
    x
                Use in conjunction with Tube Seal™ Hose Ends.  Duplicates the appearance of far more expensive stainless steel braided  hose and fittings. Fits over 1-1/4" - 1-5/8" O.D. hose. 

    Sold in 6 ft. sleeves.

    Note: Coverage may vary on diameter on hose. 6 ft. of sleeving typically covers 4 ft of hose.
  • Gates 28517 Unicoil Hose Spring, 1-3/8 OD Hose
    Gates 28517 Unicoil Hose Spring, 1-3/8 OD Hose
    x
                

    These are used for both good looks and keeping a rubber hose bent in the shape you require. 

    100% stainless steel. 

    Gates Unicoil Stainless Steel Hose Spring - For 1" I.D. hose with 1-3/8" O.D.

  • Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    x
                

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    • (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
    • (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
    • Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18

    617-4835 Instructions (PDF) 

  • Aeroquip FBU1600 Starlite Hose, -16 AN
    Aeroquip FBU1600 Starlite Hose, -16 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Professional Products 70026 Powerjection III Fuel Injection System
    Professional Products 70026 Powerjection III Fuel Injection System
    x
                

    This complete stand alone plain electronic fuel injection system supports up to 500 horsepower and is by far the simplest and cleanest aftermarket EFI system available. It's also the easiest to install and tune. The "Adaptive Learning" feature eliminates the necessity for laptop programming and tuning, except on the most radical engines. By "cleanest", we mean it has minimal wiring showing, so for those street rod, street machine, and custom car enthusiasts who object to other EFI systems because of all the engine clutter with wires running everywhere, this is the system they have been waiting for. 

    It utilizes a wideband O2 sensor, a feature missing from many competitive units. It also has a 2.5 BAR MAP sensor which means you can run up to 20 PSI of boost if you have a supercharger or turbocharger. The fuel pump comes with a combination heat sink and mounting bracket. The EMS (engine management system) mounts directly on the throttle body eliminating a major portion of the wiring required. This means you do not have to cut a hole into the firewall. Additionally the MAP sensor is packaged into the throttle body which means one less component cluttering up your firewall and no vacuum hose needed to run from the firewall to the manifold. 

    Click HERE to see what is all included! (Link)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 9