Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"stainless steel" Page 1 of 25

  • Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    x
                

    No, this is not just another headlight conduit! This is Lokar's design technology for "U-Cut-to-Fit", non-kinking stainless steel headlight braid. Designed with threaded steel studs to insure that you won't experience any of the typical separation between braid and fitting that shows unsightly wires out in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit comes complete with two 14" flexible braided stainless steel Teflon-lined housings, threaded STEEL studs, billet aluminum fittings, aluminum grill shell washers and four 26" headlight wires.

    • Non-kinking stainless steel
    • Threaded steel studs to insure no separation between braid and fitting
    • Comes complete with:
      • (2)Two 14" flexible braided stainless steel Teflon-lined housings
      • Threaded STEEL studs
      • Billet aluminum fittings
      • Aluminum grill shell washers
      • (4)Four 26" headlight wires
  • 37 Degree Flaring Tool for Stainless Steel Line
    37 Degree Flaring Tool for Stainless Steel Line
    x
                

    This is the best flaring tool for the money we have found. It has a ratcheting feed screw with a hardened flaring cone eccentrically mounted in needle bearings which produces a rolling action for even metal flow. This provides uniform wall thickness without galling. It will put a 37 degree flare in 3/16”, 1/4”, 5/16”, 3/8”, ½”, 5/8” and 3/4” tubing. We recommend this tool when flaring 3/16” stainless steel brake line.

    • Provides smooth, uniform flares with minimum effort
    • Ratcheting feed screw handle requires less motion and effort than standard handle
    • Flares steel, stainless steel, hard copper and brass thru wall thickness of .035"

    Instructions (PDF)

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Stainless Steel Exhaust/Muffler Tube Clamps
    Stainless Steel Exhaust/Muffler Tube Clamps
    x
                

    These superior quality muffler tube clamps/u-bolts are 100% stainless steel. They are ideal for any exhaust system and feature a saddle-type clamp for added strength. Choose plain or polished. Choose from 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", and 2-1/2" sizes available. Thread size on tube clamps is 8mm-1.25.

    • Stainless steel
    • Ideal for any exhaust system 
    • Saddle-type clamp for added strength
    • Thread size on clamps is 8mm-1.25
    • Choose plain or polished
    • Choose from 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", and 2-1/2" pipe diameter
  • Speedway Stainless Steel 4-Bar Rod Ends, 5/8-18 RH Thread
    Speedway Stainless Steel 4-Bar Rod Ends, 5/8-18 RH Thread
    x
                

    Don't settle for a weak 4-bar end made out of a piece of tubing welded to a bolt. These Speedway rod ends are made from fully polished investment cast stainless steel for superior strength and durability. All rod ends feature a 5/8"-18 RH threaded shank and the nylon bushing has a steel sleeve that accepts a 1/2" bolt.

    Rod ends come in three different configurations:

    • Straight Shank
      • Mounting eye is perpendicular to threaded shank
      • 5/8"-18 RH threads
      • Center of mounting eye to end of threads is 2-7/8"
    • 7° Shank
      • Mounting eye is offset 7° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 7° angle)
      • 5/8"-18 RH threads
      • Center of mounting eye to end of threads on short side is 2-13/16"
      • Center of mounting eye to end of threads on long side is 2-15/16"
    • 11° Shank
      • Mounting eye is offset 11° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 11° angle)
      • 5/8"-18 RH threads

    Choose from straight, 7° or 11° angled shanks.
     

  • Stainless Steel Single Brake Line Tube Clamps, Bag/12
    Stainless Steel Single Brake Line Tube Clamps, Bag/12
    x
                

    Brake and fuel lines are something you should mount right the first time. Using our stainless steel tube clamps ensures you never have to replace them. Single clamps are available in 3/16", 1/4", 5/16" or 3/8".

    Bag of 12 tabs with stainless steel 10-32 button head screws.

  • 1928-1931 Ford Model A Stainless Tail Lights
    1928-1931 Ford Model A Stainless Tail Lights
    x
                

    Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

    • 3.851" diameter
    • 3" depth
    • 3.851" height
    • 1-3/4" mount 

    Wire colors:

    • Housing - Ground
    • Tail - Black
    • Stop - Green

    These tail lights have two bulbs in them that are of a single filament style. 

  • Radiator Mounting Hardware
    From: $15.99
    Product Rating: 3.40 Stars
    Radiator Mounting Hardware
    x
                

    Mounting radiators can be a real pain, but these universal radiator mounting brackets will makes it a little easier. Brackets are designed to mount our universal aluminum crossflow radiators with a 3" thick core to a variety of applications. Don't forget to order the rubber insulator pads (sold separately).

    917-34700-STL
    This kit contains 4 steel brackets. The lower brackets measure 3-1/4" inside to inside. The upper brackets measure 2-1/2" inside to inside.

    917-34700-ALU
    This kit contains 4 aluminum brackets. 2 lower mounts brackets and 2 upper mount brackets (for weight savings). The lower brackets measure 3-1/4" inside to inside. The upper bracket measure 2-1/2" inside to inside.

    917-34700-SS
    This kit contains 4 stainless steel pieces. 2 lower mounts brackets and 2 upper mount brackets. The lower brackets measure 3-1/4" inside to inside. The upper bracket measure 2-1/2" inside to inside.

  • Stainless Steel Beauty Ring for 15 Inch GM Rally Wheel, 2.5 Inch Wide
    Stainless Steel Beauty Ring for 15 Inch GM Rally Wheel, 2.5 Inch Wide
    x
                Modeled after 70's GM factory equipped rally wheel beauty rings. They are designed to fit our GM Style Rally Wheels.
    • 15" x 2.5" stainless steel trim ring
    • For use on 7" rim
    • Perfect finishing touch to our GM Style Rally Wheels
  • 1932 Ford Stainless Steel Grille/Hood Trim
    1932 Ford Stainless Steel Grille/Hood Trim
    x
                

    This 1932 Ford stainless grille trim is made of polished stainless steel. It is the trim molding piece that goes between the grille and hood. This is the grille trim for a stock 32 ford grille shell. No other dimensions are available.

    • 1932 Ford
    • Polished stainless steel
    • Fits between grille and hood

     

  • Stainless Steel-Flex Vacuum Hose With Ends
    Stainless Steel-Flex Vacuum Hose With Ends
    x
                
    • Stainless Steel-Flex vacuum hose kit
    • 304 stainless steel flex hose construction
    • Easy to cut for custom installation
    • Includes 3 feet of hose & 2 Anodized clamps
  • Stainless Steel Spring Clamps, 1-3/4 Inch Wide Leaf Spring
    Stainless Steel Spring Clamps, 1-3/4 Inch Wide Leaf Spring
    x
                

    Stainless steel spring clamps to keep your front cross spring in alignment. Works with all brands of leaf springs.

    To determine which spring clamp will fit your application, use a tape measure, ruler or caliper to measure the width of the main spring leaf (not length of leaf or leaf thickness) and order the spring clamps for that width. Most early Ford coupes and roadsters (and universal aftermarket replacement front ends for these types of vehicles) use a 1-3/4" wide spring.

    • Stainless steel
    • Hex head - 7/16" Wrench
    • 1/4"-10 thread pitch
    • Under-head bolt length - 2.45" long
    • For 1-3/4" wide leaf spring
    • Works with all brands of leaf springs
  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Tight-Fit Stainless Steel Small Block Chevy Block Hugger Headers
    Tight-Fit Stainless Steel Small Block Chevy Block Hugger Headers
    x
                Please view the product's page for more information
            
  • Stainless Steel Polishing Kit
    Stainless Steel Polishing Kit
    x
                

    These high quality polishing kits are designed specifically for use on stainless steel surfaces. They are sure to give any stainless steel a brilliant, mirror smooth finish.

    Kit Contains:

    • Black, Brown, and Green polishing compounds (1 Each)
    • Mushroom, cylinder, and tapered buff pad (1 Each)
    • (5) different shaped felt bobs
    • (2) spiral sewn mounted buff pads
    • (1) single stitched mounted buff pad 

    91012455 Material Safety Data Sheet (PDF)

  • Stainless Steel 15 Inch Beauty Ring, Smooth
    Stainless Steel 15 Inch Beauty Ring, Smooth
    x
                These standard width beauty rings are constructed of highly polished stainless steel. Fits most 15" steel  wheels. 

    Sold individually.

  • Flathead Ford V8 Stainless Steel Valves, Intake
    Flathead Ford V8 Stainless Steel Valves, Intake
    x
                

    These flathead Ford V8 stainless steel valves are made of hi-grade 4N stainless. Each valve is 0.060 oversize and has an optimized seat angle and boasts a full machine finish, all of which combine to improve airflow and increase horsepower. The intake has a 30° seat and the exhaust has a 45° seat.

    Fits 1932-1953 engines.

    Flathead Valve Assembly (Link)

  • Chrome Plated Stainless Steel Flush Mount Fuel Fill
    Chrome Plated Stainless Steel Flush Mount Fuel Fill
    x
                

    This chrome plated stainless steel fuel fill can be flush mounted and includes a special opening key. Simple three hole mounting makes installation a snap.

    Use with 1-1/2" I.D. hose (sold separately).

  • Stainless Steel Pickup Bed Strips
    Stainless Steel Pickup Bed Strips
    x
                

    Clean up the bed of your pickup with these smooth, highly polished stainless steel strips which use sliding T-bolt fasteners (sold separately) to eliminate the stock-style carriage bolts. Each universal set comes with seven strips that are 82" long x 1-1/2" wide.

    910-00100 Instructions (PDF)

  • Brake Pedal Pad, Round, Stainless Steel
    Brake Pedal Pad, Round, Stainless Steel
    x
                Stainless Steel Brake Pedal Cover with rubber insert. Universal. 1/2" fine thread for attaching stud on the back.
            
  • 13 Inch Stainless Steel Expansion Tank
    13 Inch Stainless Steel Expansion Tank
    x
                

    2" outside diameter, 1⁄4" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-on cap.

    • Heavy wall construction
    • Billet screw in cap
    • Clear neoprene seal

    911-02213 Instructions (PDF)

  • DEi 010122 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Tan
    DEi 010122 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Tan
    x
                DEI Pipe Wrap is used in many types of  applications for reducing  unwanted and harmful heat under the hood and  from entering the driver  compartment while improving horsepower. 

    Pipe wrap improves performance and can be used on everyday vehicles, motorcycles, street rods, muscle cars, SUV's, RV's, heavy duty truck & tow vehicles, as well as in many non-automotive applications.

    Wrapping uses include:

    • Header tubes to protect plug wires
    • Downpipes to improve velocity
    • Sections of exhaust & tail pipe to reduce heat from entering vehicle interior
    • Protect under hood components from direct heat
    • Prevent burns from HOT motorcycle pipes
    • Strategically wrap sections of pipe to block heat from entering vehicle
    • Everything needed in one easy-to-install kit
    • Titanium wrap withstands heat up to 1800°F (980°C)
    • 25 foot roll of pipe wrap
    • Locking ties made of 304 stainless steel

    Kit includes one roll of 2" x 25' exhaust wrap & four 8" stainless steel locking ties to secure wrap.

  • Simpson 36001 Y Arm Restraint Straps
    Simpson 36001 Y Arm Restraint Straps
    x
                These Simpson Y-arm restraints have padded arm bands and stainless steel hardware. These arm restraints feature Y-straps and are designed to keep the driver's arms safely within the confines of the driver's compartment while still allowing quick entry and exit with an easy release system and steel mounting hardware. Available in red, blue or black. 
    • A must for Sprint, Midget and Off Road racing
    • Features padded arm bands and steel hardware
    • Easy release allows quick entry and exit from driver's compartment
    • Meets SFI 3.3
    • Available in black, red, or blue
  • Stainless Steel Beauty Ring for 15 Inch GM Rally Wheel, 3 Inch Wide
    Stainless Steel Beauty Ring for 15 Inch GM Rally Wheel, 3 Inch Wide
    x
                Modeled after 70's GM factory equipped rally wheel beauty rings. They are designed to fit our GM Style Rally Wheels.
    • 15" x 3" stainless steel trim ring
    • For use on 8" rim
    • Perfect finishing touch to our GM Style Rally Wheels
  • Stainless Steel Headlight Conduit Set, 12 Inch
    Stainless Steel Headlight Conduit Set, 12 Inch
    x
                Finish off your headlight wiring with these attractive and affordable polished stainless steel lengths of conduit. Conduit can be used to hide and protect fragile headlight, taillight or horn wires that are exposed to the elements. Two-piece set includes polished stainless ferrules to secure the conduit. Conduit measures 12" long with 3/8" I.D.
            
  • Flathead Ford V8 Stainless Steel Valves, Exhaust
    Flathead Ford V8 Stainless Steel Valves, Exhaust
    x
                

    These flathead Ford V8 stainless steel valves are made of hi-grade 4N stainless. Each valve is 0.060 oversize and has an optimized seat angle and boasts a full machine finish, all of which combine to improve airflow and increase horsepower. The intake has a 30° seat and the exhaust has a 45° seat.

    Fits 1932-1953 engines.

    Flathead Valve Assembly (Link)

  • Aeroquip FCF0603 Stainless Steel Braided AC Hose, -6 AN, 3 Ft. Length
    Aeroquip FCF0603 Stainless Steel Braided AC Hose, -6 AN, 3 Ft. Length
    x
                

    This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.

    .33" I.D. - 3 Ft. length

  • 1928-29 Ford Model A Front Bumper Clamp
    1928-29 Ford Model A Front Bumper Clamp
    x
                

    These '28-'29 Ford Model A stainless steel bumper clamps are useful and stylish. They bolt to the bumper braces/brackets to firmly secure the front bumper.  They feature blue colored accents and measure 4" long x 2" wide. 

    • Stainless steel finish
    • Firmly secure front bumper
    • Feature blue colored accents
    • Measure: 4" long x 2" wide
    • Two required per car
  • Stainless Steel AN3 Tube Nuts
    Stainless Steel AN3 Tube Nuts
    x
                Stainless steel AN3 tube nuts.
            
  • Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    x
                Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal.

    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.

    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.

    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with paintable stainless steel housings.
    • 30" long
    • Beautiful Art-Deco styling
    • Paintable Stainless steel
    • Turn signal, hazard light and horn functions
  • Polished Stainless Exhaust Tubing
    From: $17.99
    Product Rating: 4.71 Stars
    Polished Stainless Exhaust Tubing
    x
                

    Our fully polished 304 grade stainless steel tubing has a wall thickness of .07". Sizes available are listed by the outside diameter (O.D.) dimension.

    • Available in 1"-3" O.D., sold by the foot
    • Made of 100% polished stainless steel
    • Seamed 15 gauge
    • UPS up to 7'
    • Priced per ft.
    1. If you want us to cut the tubing into smaller lengths than you are ordering, please tell us the lengths of tubing you need by keying that information into our comment area located just above the payment information of Step 2 of the Checkout Process.
    2. If your tubing can be cut in 3 ft. or 4 ft. lengths, the price will be discounted $1.00/ft.
    3. Please keep in mind that the longest piece that can ship by UPS is 7 feet. The longest piece that can ship by truck is 10 feet.
    4. There are no returns on this stainless steel exhaust tubing.

     

  • Stainless Steel Smoothie Clevis, 5/8 RH NF Thread, 3/8 Slot & Hole
    Stainless Steel Smoothie Clevis, 5/8 RH NF Thread, 3/8 Slot & Hole
    x
                

    A beautiful stainless steel clevis ideal for your hot rods' suspension! The shank features 5/8" RH fine threads. Has a 3/8" wide slot and 3/8" diameter hole.

    • Beautiful, rugged clevis ideal for hot rod suspension
    • Shank features 5/8" RH NF threads
    • 3/8" slot
    • Stainless steel
  • 1937-1938 Chevy Red Tail Light Assembly
    1937-1938 Chevy Red Tail Light Assembly
    x
                

    Use these beautiful polished stainless steel tail lights to upgrade your 1937-1939 Stovebolt or hang 'em on the back of a T-bucket for a different look! Polished stainless steel housing with glass lens. Choose left or right.

    • The left tail light (pictured here) also features a clear license plate lens
    • Each side uses (2) single filament 1156 bulbs
    • Wiring Guide:
      • White - Ground
      • Red - Stop/turn
      • Black - Taillight
    • 3" wide x 4-1/4" high

    Although listed as a 1937-1938 Chevy, this taillight is very universal.

  • Stainless Steel T-Bucket Windshield Support Rods
    Stainless Steel T-Bucket Windshield Support Rods
    x
                

    These polished stainless steel windshield support rods measure 5' long and can be cut to required length. Connects to the frame.

    Windshield Rod Assembly (GIF)

    916-56192 Instructions (PDF)

  • Stainless Steel 15 Inch Beauty Ring, Ribbed
    Stainless Steel 15 Inch Beauty Ring, Ribbed
    x
                

    1940 Ford style standard width beauty ring constructed of highly polished stainless steel. Fits most 15" steel wheels except steel wheel 91001545 or any wheel that measures 15 x 4.5". It will not sit flat against the lip of the wheel.

    Sold individually.

  • Goodridge 15 Inch Braided Brake Line with 90 Degree End
    Goodridge 15 Inch Braided Brake Line with 90 Degree End
    x
                

    These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    • Stainless steel
    • 90° fitting on one end and a straight fitting on the other
    • Brake lines, clutch lines and gauge lines
    • Available with AN3 or AN4 fittings
    • Sold individually

    Select applicable length. AN size is the "-#" at the end of the part number.

  • DEi 010201 8 Inch Stainless Steel Locking Ties, 8 Pack
    DEi 010201 8 Inch Stainless Steel Locking Ties, 8 Pack
    x
                

    These locking ties are designed to secure DEi's exhaust wrap but the uses are endless. Made of high grade stainless steel they will withstand temperatures in excess of 2500 degrees and have a tensile strength over 100 lbs. These locking ties will provide a finished look to any job quickly and easily. 

  • Stainless Steel Dual Brake Line Tube Clamps, Bag/12
    Stainless Steel Dual Brake Line Tube Clamps, Bag/12
    x
                

    Brake and fuel lines are something you should mount right the first time. Using our stainless steel tube clamps ensures you never have to replace them. Dual brake line clamps have 3/16" on one end with your choice of 3/16", 1/4" or 3/8" on the other end.

    Bag of 12 tabs with stainless steel 10-32 button head screws.

  • Universal Trunk Hinge Kit
    From: $69.99
    Product Rating: 4.00 Stars
    Universal Trunk Hinge Kit
    x
                

    We designed this trunk hinge kit for our 1932 Lo-Boy but found it was just the ticket for almost any application. 

    • Set of two steel hinges
    • Fitting required
    • Choose Zinc or Stainless Steel finish
  • SSBC Stainless Steel 3/16 Inch Brake Lines
    SSBC Stainless Steel 3/16 Inch Brake Lines
    x
                

    This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45° double flare with a 3/8"-24 male fitting. Seven different lengths available.

    NOTE: This tubing is flared from the factory with a double flare machine, therefore it is not recommended that these lines be cut and flared to length.

  • Lokar TD-3700FM36 Stainless Steel 700R4 Firewall Mount Trans Dipstick
    Lokar TD-3700FM36 Stainless Steel 700R4 Firewall Mount Trans Dipstick
    x
                

    Braided stainless covered tubing with billet look handle and stainless hardware. Flexible design gives added mounting versatility.

     

    You have flexibility with our Teflon-lined Flexible Braided Stainless 700R4 Transmission Dipstick. This R4 Kit comes complete with braided stainless outer housing and heat resistant E-Z to read flexible inner dipstick measuring cable. Inner cable is molded with appropriate trans fluid levels. Billet aluminum handle and billet aluminum fittings complement Lokar's Flexible Engine Dipsticks. Kit includes dipstick funnel adapter to assist in filling. Designed for "push in" style transmissions. Dipstick seals with double O-rings.  Firewall mount measures 24" in length. 

    This 700R4 dipstick kit comes complete with installation instructions.

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25