Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"stainless rod ends" Page 1 of 10

  • Speedway Stainless Steel 4-Bar Rod Ends, 5/8-18 RH Thread
    Speedway Stainless Steel 4-Bar Rod Ends, 5/8-18 RH Thread
    x
                

    Don't settle for a weak 4-bar end made out of a piece of tubing welded to a bolt. These Speedway rod ends are made from fully polished investment cast stainless steel for superior strength and durability. All rod ends feature a 5/8"-18 RH threaded shank and the nylon bushing has a steel sleeve that accepts a 1/2" bolt.

    Rod ends come in three different configurations:

    • Straight Shank
      • Mounting eye is perpendicular to threaded shank
      • 5/8"-18 RH threads
      • Center of mounting eye to end of threads is 2-7/8"
    • 7° Shank
      • Mounting eye is offset 7° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 7° angle)
      • 5/8"-18 RH threads
      • Center of mounting eye to end of threads on short side is 2-13/16"
      • Center of mounting eye to end of threads on long side is 2-15/16"
    • 11° Shank
      • Mounting eye is offset 11° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 11° angle)
      • 5/8"-18 RH threads

    Choose from straight, 7° or 11° angled shanks.
     

  • Stainless Jam Nut, 5/8 Inch-18 RH NF Fine Thread
    Stainless Jam Nut, 5/8 Inch-18 RH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium stainless steel and they're available with right hand threads.

    These stainless steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 5/8 Inch-18 RH NF Fine Thread
    • Available in right hand thread.
  • Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                Please view the product's page for more information
            
  • Stainless Steel Tie Rod End, 11/16-18 RH
    Stainless Steel Tie Rod End, 11/16-18 RH
    x
                These tie rod ends are just like our standard Ford tie rod ends except they are made of beautifully polished stainless steel. They have 11/16"-18 thread and include hardware. Make sure to use anti-seize on the threads. 
            
  • Speedway Stainless Steel 4-Bar Rod End, 5/8-18 LH Thread, Straight Shank
    Speedway Stainless Steel 4-Bar Rod End, 5/8-18 LH Thread, Straight Shank
    x
                

    Don't settle for a weak 4-bar end made out of a piece of tubing welded to a bolt. These Speedway rod ends are made from fully polished investment cast stainless steel for superior strength and durability. Features a 5/8"-18 LH threaded shank and the nylon bushing has a steel sleeve that accepts a 1/2" bolt. 

    • Reverse, left hand threads
    • Mounting eye is perpendicular to threaded shank
    • Center of mounting eye to end of threads is 2-7/8"
    • Overall width: 1.370"
    • Rod end width: 1.050"
    • Rod end I.D.: 1.125"
    • Steel sleeve O.D.: 0.750"
    • Steel sleeve I.D.: 0.500"
    • Threaded shaft length: 1-7/8"
  • Chrome Tie Rod/Drag Link Kit with Stainless 11/16 Inch Tie Rod Ends
    Chrome Tie Rod/Drag Link Kit with Stainless 11/16 Inch Tie Rod Ends
    x
                Please view the product's page for more information
            
  • FK Rod Ends SJM4T Stainless Steel 1/4 Inch RH Male Heim Joint
    FK Rod Ends SJM4T Stainless Steel 1/4 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/4" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/8" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML8T Stainless Steel 1/2 Inch LH Male Heim Joint
    FK Rod Ends SJML8T Stainless Steel 1/2 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/2" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM7T Stainless Steel 7/16 Inch RH Male Heim Joint
    FK Rod Ends SJM7T Stainless Steel 7/16 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 7/16" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML4T Stainless Steel 1/4 Inch LH Male Heim Joint
    FK Rod Ends SJML4T Stainless Steel 1/4 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/4" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML5T Stainless Steel 5/16 Inch LH Male Heim Joint
    FK Rod Ends SJML5T Stainless Steel 5/16 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/16" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM8T Stainless Steel 1/2 Inch RH Male Heim Joint
    FK Rod Ends SJM8T Stainless Steel 1/2 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/2" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML12T Stainless Steel 3/4 Inch LH Male Heim Joint
    FK Rod Ends SJML12T Stainless Steel 3/4 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 3/4" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML7T Stainless Steel 7/16 Inch LH Male Heim Joint
    FK Rod Ends SJML7T Stainless Steel 7/16 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 7/16" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML6T Stainless Steel 3/8 Inch LH Male Heim Joint
    FK Rod Ends SJML6T Stainless Steel 3/8 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 3/8" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM6T Stainless Steel 3/8 Inch RH Male Heim Joint
    FK Rod Ends SJM6T Stainless Steel 3/8 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 3/8" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML10T Stainless Steel 5/8 Inch LH Male Heim Joint
    FK Rod Ends SJML10T Stainless Steel 5/8 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/8" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM5T Stainless Steel 5/16 Inch RH Male Heim Joint
    FK Rod Ends SJM5T Stainless Steel 5/16 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/16" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    x
                

    These unpolished stainless steel tie rod/drag link kits are pre-cut and tapped lengths of 7/8" O.D. tubing available in multiple lengths. Each kit comes complete with 5/8" heim joint rod ends and jam nuts.Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Specify desired length in comments section of shopping cart. No returns/exchange on custom length links.Select your length based on the center-to-center of the heim rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/4" shorter to 1/2" longer.

    Normally used with '49-'54 Chevy style spindles and flat steel steering arms. Can be used with stock type Ford arms if drilled out to 5/8".

    Measuring Tie Rod or Drag Links (GIF) 

    Flat Steering Arm Illustration (GIF)

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die o

  • Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    x
                Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal.

    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.

    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.

    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with paintable stainless steel housings.
    • 30" long
    • Beautiful Art-Deco styling
    • Paintable Stainless steel
    • Turn signal, hazard light and horn functions
  • Stainless Jam Nut, 3/8 Inch-24 RH NF Fine Thread
    Stainless Jam Nut, 3/8 Inch-24 RH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium stainless steel and they're available with right hand threads.

    These stainless steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 3/8 Inch-24 RH NF Fine Thread
    • Available in right hand thread.
    • Works with -3 AN bulkhead tee adapter brake fittings
  • Suspension Hardware, 11/16 Inch Threaded Stainless Four-Bar Rod End RH
    Suspension Hardware, 11/16 Inch Threaded Stainless Four-Bar Rod End RH
    x
                

    We have in stock a large range of rod ends to suit every application.  For shear strength there is nothing better than our solid rod end, made from premium grade steel material, these are capable of handling the most concentrated forces.

    Front Suspension Hardware, 11/16 Inch Threaded Stainless Four-Bar Rod

    • Investment cast stainless steel
    • 11/16"-18 RH threads
    • Nylon bushings with steel sleeve
    • Accepts 1/2" bolt
  • Hot Rod Nostalgia Steering Column, 30 Inch, Polished Stainless Steel
    Hot Rod Nostalgia Steering Column, 30 Inch, Polished Stainless Steel
    x
                Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal.

    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.

    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.

    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with polished or paintable stainless steel housings.
    • Fits 1969-1994 GM Steering Weel
    • Fits Grant Wheel with Adapter for 1969-1994 GM Steering Wheel
    • 30" long
    • Beautiful Art-Deco styling
    • Polished Stainless steel
    • Turn signal, hazard light and horn functions
  • Stainless Jam Nut, 11/16 Inch-18 RH NF Fine Thread
    Stainless Jam Nut, 11/16 Inch-18 RH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium stainless steel and they're available with right hand threads.

    These stainless steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 11/16 Inch-18 RH NF Fine Thread
    • Available in right hand thread.
  • Stainless Jam Nut, 3/8 Inch-24 LH NF Fine Thread
    Stainless Jam Nut, 3/8 Inch-24 LH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium stainless steel and they're available with left hand threads.

    These stainless steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 3/8 Inch-24 LH NF Fine Thread
    • Available in left hand thread.
  • Speedway Corvair Pitman Arm
    From: $49.99
    Product Rating: 4.50 Stars
    Speedway Corvair Pitman Arm
    x
                

    This is our forged 'new design' Corvair pitman arm. It measures approximately 7" end to end, approximately 5-3/8" from the center of the big hole to the center of the small hole. The arm has a side-to-side offset approximately 1-7/8". The small hole fits an early Ford tie rod end (such as our 910-02909) and it is half tapered from both sides so that the drag link can be mounted from either side.


     

     

  • Stainless Jam Nut, 11/16 Inch-18 LH NF Fine Thread
    Stainless Jam Nut, 11/16 Inch-18 LH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium stainless steel and they're available with left hand threads.

    These stainless steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 11/16 Inch-18 LH NF Fine Thread
    • Available in left hand thread.
  • Stainless Jam Nut, 5/8 Inch-18 LH NF Fine Thread
    Stainless Jam Nut, 5/8 Inch-18 LH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium stainless steel and they're available with left hand threads.

    These stainless steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 5/8 Inch-18 LH NF Fine Thread
    • Available in left hand thread.
  • Unpolished Stainless Sleeve for 5/8 Inch-18 Rod Ends
    Unpolished Stainless Sleeve for 5/8 Inch-18 Rod Ends
    x
                

    If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.

    To order:

    1. Use guide below to measure your finished length.
    2. The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
    3. All sleeves will have internal RH thread in one end and LH thread in the other.

    Measuring Guide for Tie Rod/Drag Link (GIF)

     

    43" Sleeves are clearance priced 

  • Spring-Over 4 Inch Drop Front End for Chevy Spindles, Stainless
    Spring-Over 4 Inch Drop Front End for Chevy Spindles, Stainless
    x
                For T's and early 1930's street rods using 1949-54 Chevy passenger car spindles. Maximum car weight 2500 lbs. Choose Plain, Chrome, or Stainless steel.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4-leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
    Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
    x
                

    These tie rod or drag link kits are pre-cut and tapped lengths of brushed stainless 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts.Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • Stainless Steel Tie Rod Ends, 11/16-18 LH
    Stainless Steel Tie Rod Ends, 11/16-18 LH
    x
                These tie rod ends are just like our standard Ford tie rod ends except they are made of beautifully polished stainless steel. They have 11/16"-18 thread and include hardware. Make sure to use anti-seize on the threads.
            
  • Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Stainless
    Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Stainless
    x
                

    For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4 leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately
  • Spring-Over 4 Inch Drop Front End for Ford Spindles, Stainless
    Spring-Over 4 Inch Drop Front End for Ford Spindles, Stainless
    x
                For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs. 

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4-leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Spring-Over 6 Inch Drop Front End for Chevy Spindles, Stainless
    Spring-Over 6 Inch Drop Front End for Chevy Spindles, Stainless
    x
                For T's and early 1930's street rods using 1949-54 Chevy passenger car spindles. Maximum car weight 2500 lbs. 

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4-leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
    Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
    x
                

    These tie rod or drag link kits are pre-cut and tapped lengths of brushed stainless 7⁄8" O.D. tubing available in a custom length. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3-1/2" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • 1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    x
                

    These 1-3/4" drop forged steel steering arms are popular on Model T - 1934 Fords with 4" dropped axles and four-bar or hairpin radius rod suspensions. Will attach to '37-'48 Ford spindles and accept 11/16" Ford "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.

    Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

     Steering Arm Ends Guide (GIF)

     Cross Steering Guide (GIF)

  • Vega Pitman Arm - Tapered for Tie Rod
    From: $49.99
    Product Rating: 5.00 Stars
    Vega Pitman Arm - Tapered for Tie Rod
    x
                These all new reproduction pitman arms feature a non-offset design, a double tapered "Ford" tie rod end hole (lets you attach the drag link on the top or on the bottom), and comes in gleaming stainless steel or plain steel. Perfect for a repro Vega steering box. 
            
  • Stainless Steel Smoothie Clevis, 5/8 RH Thread, 3/8 Slot & Hole
    Stainless Steel Smoothie Clevis, 5/8 RH Thread, 3/8 Slot & Hole
    x
                

    A beautiful polished stainless steel clevis ideal for your hot rods' suspension! The shank features 5/8" RH fine threads. Has a 3/8" wide slot and 3/8" diameter hole.

    • Beautiful, rugged clevis ideal for hot rod suspension
    • Rounded head of 3/8" cross bolt (included) blends smoothly into overall shape
    • Shank features 5/8" RH fine threads
    • 3/8" slot
    • Measures 4 inches from end to end
    • Polished stainless steel

     

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 10