Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"stainless hose clamps" Page 1 of 2

  • 1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    x
                

    Dress up your flathead by replacing your original cylinder head-to-radiator hoses with these stainless or chrome plated pieces. Each radiator hose dress kit replaces both upper hoses on a flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps. This is a quick and easy way to add some sparkle to your engine compartment.

    • Available with polished stainless steel or quality chrome-plated tubes
    • Strong three-ply rubber hose connectors
    • Attractive stainless steel hose clamps
    • Easy installation
  • Flo-Fast 40404 3/4 Inch Extractor Extension Tube Kit for Barrels
    Flo-Fast 40404 3/4 Inch Extractor Extension Tube Kit for Barrels
    x
                

    This drum extractor kit consists of an 18" length of 3/4" O.D. rigid clear tubing plus a hi-gear style stainless hose clamp. For use with Flo-Fast Pump Systems. These extractor kits work great for quick pumping of fuel in the pit during the race.

    • 18" aluminum tube
    • Fits 3/4'' ID x 1'' OD hose 
    • Clear tubing
    • Hi-gear style stainless hose clamp
  • AFCO Stainless Hose Clamp, 1-5/8 Inch - 2-1/8 Inch
    AFCO Stainless Hose Clamp, 1-5/8 Inch - 2-1/8 Inch
    x
                

    AFCO polished stainless steel hose clamps. Fits 1-5/8" to 2-1/8" O.D. hoses. Unique thumb screw eliminates the need for a screwdriver for quick and easy removal. Also has a hole for safety wire.

  • Flexible Radiator Hose Kit, 24 Inch
    From: $69.99
    Product Rating: 4.00 Stars
    Flexible Radiator Hose Kit, 24 Inch
    x
                

    Flexible stainless steel radiator hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kit includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • 1937-39 and 1942-48 Flathead Ford V8 Radiator Hose Kits
    1937-39 and 1942-48 Flathead Ford V8 Radiator Hose Kits
    x
                

    Show some style! Add some sparkle! Replace your 59A flathead's original cylinder head-to-radiator hoses with these polished stainless or chrome-plated pieces. Each kit replaces both upper hoses for a flathead Ford V8 and includes two chrome or stainless tubes, four 3-ply rubber connector hoses, and eight hose clamps.

  • AIRAID 9408 Stainless Steel #72 Hose Clamp, 4 Inch - 4-7/8 Inch
    AIRAID 9408 Stainless Steel #72 Hose Clamp, 4 Inch - 4-7/8 Inch
    x
                

    Use these stainless steel tube clamps to secure your large diameter air hoses and interior heating duct.  Clamps over 4" - 4-7/8" O.D. hose.

    • Quick and easy-to-use
    • Stainless steel construction
    • Secures 4" - 4-7/8" hoses
    • Size #72
  • AIRAID 9404 Stainless Steel #56 Hose Clamp, 3 Inch - 3-7/8 Inch
    AIRAID 9404 Stainless Steel #56 Hose Clamp, 3 Inch - 3-7/8 Inch
    x
                

    Use these stainless steel tube clamps to secure your large diameter air hoses and interior heating duct.  Clamps over 3" - 3-7/8" O.D. hose.

    • Quick and easy-to-use
    • Stainless steel construction
    • Secures 3"- 3-7/8" hoses
    • Size #56

     

  • AIRAID 9406 Stainless Steel #64 Hose Clamp, 3-1/2 Inch - 4-3/8 Inch
    AIRAID 9406 Stainless Steel #64 Hose Clamp, 3-1/2 Inch - 4-3/8 Inch
    x
                

    Use these stainless steel tube clamps to secure your large diameter air hoses and interior heating duct.  Clamps over 3-1/2" - 4-7/8" O.D. hose.

    • Quick and easy-to-use
    • Stainless steel construction
    • Secures 3-1/2" - 4-7/8" hoses
    • Size #64
  • Stainless Steel-Flex Vacuum Hose With Ends
    Stainless Steel-Flex Vacuum Hose With Ends
    x
                
    • Stainless Steel-Flex vacuum hose kit
    • 304 stainless steel flex hose construction
    • Easy to cut for custom installation
    • Includes 3 feet of hose & 2 Anodized clamps
  • Standard Transmission Cooler
    $19.99
    Standard Transmission Cooler
    x
                

    Use this 4-pass standard transmssion cooler in place of radiator lower tank cooler, or as a supplement to it.

    • 5" Tall x 16-3/4" Wide x 3/4" Thick
    • Includes 4 ft. rubber hose (3/8" I.D.), 4 stainless hose clamps and nylon mounting kit

    Transmission Cooler Installation Instructions (PDF)

  • 1949-1953 Flathead Ford V8 Radiator Hose Dress-Up Kits
    1949-1953 Flathead Ford V8 Radiator Hose Dress-Up Kits
    x
                

    Dress up the flathead in your postwar Ford or Mercury by replacing the original cylinder head-to-radiator hoses with these stainless or chrome-plated pieces. Each radiator hose dress kit replaces both upper hoses on a flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps.

    • Simple way to add some sparkle to your engine compartment
    • Available with polished stainless steel or quality chrome-plated tubes
    • Strong three-ply rubber hose connectors
    • Attractive stainless steel hose clamps
  • AIRAID 140-300 3 Inch Silicon Hump Hose with Clamps
    AIRAID 140-300 3 Inch Silicon Hump Hose with Clamps
    x
                

    These silicon hump hose connectors are great for use with AirAid's performance air intake systems. They come complete for installation with clamps and are designed to be used with 3" diameter air tubing.

    • Works with 3" tubing (178100300)
    • Stainless steel clamps included
    • Allows for more movement in system as compared to a coupler
  • Heavy Duty Turn Signal Switch
    Heavy Duty Turn Signal Switch
    x
                

    For early autos not equipped with right and left turn signals. Chrome plated finish. Switch works with 6 or 12 volt systems. Includes wiring diagram. Clamps to any steering column with included stainless hose clamp. Switch has four-way flashers and does not self cancel.

    You will need to purchase a three-prong flasher to use with this switch (part number 910-64046). For LED light applications, you will also need a LED dummy load resistor (part number 910-03030).

    910-62860 Instructions (PDF)

  • Quick Tight Hose Clamp, 1-5/8 - 2-1/8 Inch
    Quick Tight Hose Clamp, 1-5/8 - 2-1/8 Inch
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over 1.625" to 2.125" O.D. hose.
            
  • Quick Tight Hose Clamp, 3/4 - 1 Inch
    Quick Tight Hose Clamp, 3/4 - 1 Inch
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over .75" to 1.00" O.D. hose.
            
  • Quick Tight Hose Clamp, 1 Inch to 1-1/2 Inch
    Quick Tight Hose Clamp, 1 Inch to 1-1/2 Inch
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over 1" to 1.50" O.D. hose.
            
  • Flexible Radiator Hose Kit, 36 Inch
    From: $79.99
    Product Rating: 5.00 Stars
    Flexible Radiator Hose Kit, 36 Inch
    x
                

    Flexible stainless steel hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kits includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • Billet Specialties 68729 Alum Hose Separator Clamp, .906 x 1.125 Inch
    New
    Billet Specialties 68729 Alum Hose Separator Clamp, .906 x 1.125 Inch
    x
                Please view the product's page for more information
            
  • Billet Specialties 68820 Alum Hose Separator Clamp, 1.015 x 1.015 Inch
    New
    Billet Specialties 68820 Alum Hose Separator Clamp, 1.015 x 1.015 Inch
    x
                Please view the product's page for more information
            
  • Fuel and Oil Line Hose Nipple Fitting Kit, 3/8 Hose to 1/4 NPT
    Fuel and Oil Line Hose Nipple Fitting Kit, 3/8 Hose to 1/4 NPT
    x
                This hose end pipe fitting kit includes two brass fitting adapters, 1⁄4" NPT pipe thread to 3⁄8" I.D. hose, and two stainless hose clamps. Kit is very useful when hooking up fuel pressure regulator fittings, fuel block fittings, fuel pump fittings, and carburetor fittings.
            
  • Racing Convex Wide Angle Rear View Mirror
    Racing Convex Wide Angle Rear View Mirror
    x
                

    Wide angle convex rear view mirror features all metal mounting brackets designed to mount onto 1-3/4" tubing. Mirror is glass. 

    This racing rear view mirror measures 16-1/2" wide x 3" tall. Includes stainless hose clamps for mounting.

  • Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    x
                

    Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 1-1/2" to 2" wide.

    Sold in pairs.

  • Professional Products 70026 Powerjection III Fuel Injection System
    Professional Products 70026 Powerjection III Fuel Injection System
    x
                

    This complete stand alone plain electronic fuel injection system supports up to 500 horsepower and is by far the simplest and cleanest aftermarket EFI system available. It's also the easiest to install and tune. The "Adaptive Learning" feature eliminates the necessity for laptop programming and tuning, except on the most radical engines. By "cleanest", we mean it has minimal wiring showing, so for those street rod, street machine, and custom car enthusiasts who object to other EFI systems because of all the engine clutter with wires running everywhere, this is the system they have been waiting for. 

    It utilizes a wideband O2 sensor, a feature missing from many competitive units. It also has a 2.5 BAR MAP sensor which means you can run up to 20 PSI of boost if you have a supercharger or turbocharger. The fuel pump comes with a combination heat sink and mounting bracket. The EMS (engine management system) mounts directly on the throttle body eliminating a major portion of the wiring required. This means you do not have to cut a hole into the firewall. Additionally the MAP sensor is packaged into the throttle body which means one less component cluttering up your firewall and no vacuum hose needed to run from the firewall to the manifold. 

    Click HERE to see what is all included! (Link)

  • AIRAID 120-350 Air Tube Coupler with Clamps, 3-1/2 Inch Diameter
    AIRAID 120-350 Air Tube Coupler with Clamps, 3-1/2 Inch Diameter
    x
                These silicon hose connectors are great for use with  AirAid's   performance air intake systems. They come complete with clamps and are  designed to be used with 3-1/2"   diameter air tubing.
    • Works with 3-1/2" tubing (178100350)
    • Durable silicon material
    • Stainless steel clamps included
  • AIRAID 120-300 Air Tube Coupler with Clamps, 3 x 3 Inch
    AIRAID 120-300 Air Tube Coupler with Clamps, 3 x 3 Inch
    x
                These silicon hose connectors are great for use with  AirAid's  performance air intake systems. They come complete with clamps and are designed to be used with 3"   diameter air tubing.
    • Works with 3" tubing (178100300)
    • Durable silicon material
    • Stainless steel clamps included
  • AIRAID 120-400 Air Tube Coupler with Clamps, 4 Inch Diameter
    AIRAID 120-400 Air Tube Coupler with Clamps, 4 Inch Diameter
    x
                These silicon hose connectors are great for use with  AirAid's   performance air intake systems. They come complete with clamps and are  designed to be used with 4"   diameter air tubing.
    • Works with 4" tubing (178100400)
    • Durable silicon material
    • Stainless steel clamps included
  • Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
    Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
    x
                

    The finishing touch to your mechanical (cable-drive) speedometer installation in your Ford. Kit includes a 7 ft. long braided stainless steel housing and 7' inner cable (you trim to length), billet aluminum fitting ends and instructions.

    Works with all cable-drive aftermarket and original equipment speedometers that have a male 5/8"-18 threaded connection. The transmission end has the standard Ford end with retaining clamp.

  • Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    x
                

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    • (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
    • (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
    • Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18

    617-4835 Instructions (PDF) 

Goto Previous PagePrevious Page
1 2