Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"stainless brake hose" Page 1 of 7

  • DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • 37 Degree Flaring Tool for Stainless Steel Line
    37 Degree Flaring Tool for Stainless Steel Line
    x
                

    This is the best flaring tool for the money we have found. It has a ratcheting feed screw with a hardened flaring cone eccentrically mounted in needle bearings which produces a rolling action for even metal flow. This provides uniform wall thickness without galling. It will put a 37 degree flare in 3/16”, 1/4”, 5/16”, 3/8”, ½”, 5/8” and 3/4” tubing. We recommend this tool when flaring 3/16” stainless steel brake line.

    • Provides smooth, uniform flares with minimum effort
    • Ratcheting feed screw handle requires less motion and effort than standard handle
    • Flares steel, stainless steel, hard copper and brass thru wall thickness of .035"

    Instructions (PDF)

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Goodridge 15 Inch Braided Brake Line with 90 Degree End
    Goodridge 15 Inch Braided Brake Line with 90 Degree End
    x
                

    These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    • Stainless steel
    • 90° fitting on one end and a straight fitting on the other
    • Brake lines, clutch lines and gauge lines
    • Available with AN3 or AN4 fittings
    • Sold individually

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Stainless Steel Single Brake Line Tube Clamps, Bag/12
    Stainless Steel Single Brake Line Tube Clamps, Bag/12
    x
                

    Brake and fuel lines are something you should mount right the first time. Using our stainless steel tube clamps ensures you never have to replace them. Single clamps are available in 3/16", 1/4", 5/16" or 3/8".

    Bag of 12 tabs with stainless steel 10-32 button head screws.

  • Braided Stainless AN 18 Inch Brake Line
    Braided Stainless AN 18 Inch Brake Line
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    x
                

    Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 1-1/2" to 2" wide.

    Sold in pairs.

  • Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
    Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
    x
                

    Cables are designed for use with Lokar Floor Mount & Under Dash Mount Emergency Hand Brakes. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.

    Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit is complete with cable bracket and spacers. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit".

    See Application tab for model-specific information.

    EC80FU E-Brake Cable Instructions (PDF) 

    Connector Cable Installation Instructions (PDF) 

  • DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Braided Stainless AN 18 Inch Brake Line, Straight AN3
    Braided Stainless AN 18 Inch Brake Line, Straight AN3
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for for independent rear axles (IRS). Kit includes two 20 foot coils of 3/16" stainless steel line, seventeen -3 AN tube nuts, seventeen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, four -3 AN 18" braided stainless hoses, and three 3/8" bulkhead nuts.

    617-8545 Instructions (PDF)

    NOTE: These kits are de

  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for conventional live axle rear suspensions. Includes a 20 foot coil of 3/16" stainless steel line, nineteen -3 AN tube nuts, nineteen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, three -3 AN 18" braided stainless lines, and three 3/8" bulkhead nuts.

    617-8530 Instructions 

  • Stainless 19 Inch Brake Line with 90 Degree End
    Stainless 19 Inch Brake Line with 90 Degree End
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • T-Bucket Stainless Brake Line Kit
    T-Bucket Stainless Brake Line Kit
    x
                

    Complete your '23 T-Bucket chassis with this pre-bent Stainless Steel brake line kit. Includes all lines, proportioning valve, residual pressure valves, brake pressure switch, fittings, and hardware necessary to properly plumb the brakes on your T.

    Notes: Does not work with '27 T chassis.  Also of note, due to unlimited rear axle brake combinations, this kit will not include rear axle housing brake lines, hoses, or fittings.  The kit will include the AN style brake hose to transfer from the rear crossmember to the housing.  The chassis builder/installer will then need to continue the brake line system from that point on to both rear wheels with necessary brake fitting hardware as needed.

    Due to the different brakes and caliper combinations, this kit will NOT include caliper/wheel cylinder fittings.

    Learn more about the proper uses of residual and proportioning valves and by reading our tech article. Brake System Selection.  

  • Stainless Steel Dual Brake Line Tube Clamps, Bag/12
    Stainless Steel Dual Brake Line Tube Clamps, Bag/12
    x
                

    Brake and fuel lines are something you should mount right the first time. Using our stainless steel tube clamps ensures you never have to replace them. Dual brake line clamps have 3/16" on one end with your choice of 3/16", 1/4" or 3/8" on the other end.

    Bag of 12 tabs with stainless steel 10-32 button head screws.

  • Braided Stainless AN 12 Inch Brake Line
    Braided Stainless AN 12 Inch Brake Line
    x
                

    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.

  • SSBC Stainless Steel 3/16 Inch Brake Lines
    SSBC Stainless Steel 3/16 Inch Brake Lines
    x
                

    This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45° double flare with a 3/8"-24 male fitting. Seven different lengths available.

    NOTE: This tubing is flared from the factory with a double flare machine, therefore it is not recommended that these lines be cut and flared to length.

  • Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    x
                These steel braided front brake lines are 19" overall length. They are for common 1978-1988 GM metric style calipers and include 10mm x 1.5 banjo fittings for one end and have 3/8"-24 inverted flare female on the other. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
            
  • Stainless 12 Inch Brake Line with 90 Degree End
    Stainless 12 Inch Brake Line with 90 Degree End
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • DOT Braided Stainless Brake Hoses, GM/Ford, 7/16-20
    DOT Braided Stainless Brake Hoses, GM/Ford, 7/16-20
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
    • Used to connect from hard line on rear axle to rear calipers when changing from drum to disc brakes
  • DOT Braided Stainless Brake Hoses, Mustang II, 7/16-24
    DOT Braided Stainless Brake Hoses, Mustang II, 7/16-24
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Stainless Thru-Frame Brake Line Fittings, 2-1/4 - 2-3/4 Inch
    Stainless Thru-Frame Brake Line Fittings, 2-1/4 - 2-3/4 Inch
    x
                

    Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 2-1/4" to 2-3/4" wide.

    Sold in pairs.

  • Goodridge 12212 1969-76 GM Midsize Braided Stainless Brake Hose Kit
    Goodridge 12212 1969-76 GM Midsize Braided Stainless Brake Hose Kit
    x
                

    This DOT certified brake line kit is designed to be a bolt-in for 1969-1976 GM midsize cars with original single piston front calipers and rear drum brakes. The kit includes two 16" front and one 14" rear stainless steel braided brake hoses, two banjo bolts and washers.

    Two 16" front lines with 7/16" banjos on one end and 3/8-24 IFF on the "frame" end.

    Banjo bolts and crush washers are included. 

    One 14" line for the rear axle with 7/16-24 IFF on the "frame" end, and a handy "block" on the axle end. The "block" has 3/8-24 IFF on two sides, and a 7/16" hole on top so that it can be bolted to the rear axle.
  • 45 Degree Double Flaring Tool
    45 Degree Double Flaring Tool
    x
                

    Use this handy tool to double flare mild steel brake lines just like the brake shop does. This tool makes 45° flares only. For 3/16", 1/4", 5/16", 3/8", 1/2" mild steel line only, NOT to be used with stainless steel line.  If using 37° AN fittings with stainless steel line, use 910-89524.

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Dual Feed Master Cylinder w/ Stainless Sleeve
    Dual Feed Master Cylinder w/ Stainless Sleeve
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our new sleeved dual feed master cylinder will work with most disc/drum combinations.

    • No more pitting in the bore
    • 1" bore
    • Popular 3/8"-24 inverted flare ports
    • 3/16" brake line will screw right in

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Stainless 26 Inch Brake Line with 90 Degree End
    Stainless 26 Inch Brake Line with 90 Degree End
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Stainless 48 Inch Brake Line with 90 Degree End
    Stainless 48 Inch Brake Line with 90 Degree End
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Stainless 36 Inch Brake Line with 90 Degree End
    Stainless 36 Inch Brake Line with 90 Degree End
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Braided Stainless AN 60 Inch Brake Line
    Braided Stainless AN 60 Inch Brake Line
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Braided Stainless AN 8 Inch Brake Line
    Braided Stainless AN 8 Inch Brake Line
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Braided Stainless AN 6 Inch Brake Line
    Braided Stainless AN 6 Inch Brake Line
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Stainless Steel Brake Line, 3/16 Inch
    Stainless Steel Brake Line, 3/16 Inch
    x
                

    Our 3/16" stainless steel tubing is made from 304 grade (rated at 6000 psi) which is double annealed to allow easy flaring.

    NOTE: This line is intended to be used in conjunction with 37 degree AN # 3 style fittings which make use of a single flare. Stainless steel line will not work with 45 degree double flare 3/8"-24 flare nuts. We strongly suggest that the 37 degree single flare (flaring tool # 910-89524) be used when flaring this line for the AN # 3 tube nuts and sleeves.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

    Brake System Builder Tip (GIF)

  • Adjustable Proportioning Blocks With Brake Light Switch
    Adjustable Proportioning Blocks With Brake Light Switch
    x
                

    This adjustable proportioning block allows you to run lines from the master cylinder to the block and then to the appropriate wheels. What is neat about it is that it also contains the proportioning valve and brake light switch. This dramatically reduces the amount of fittings needed and potential leaks.

    The adjustable proportioning valve regulates rear brake pressure, helping to maintain correct brake bias between front and rear brakes. It is designed for dual bowl master cylinders. The distribution block connects to the master cylinder and distributes brake fluid to all four wheels. An easy to turn handle with directional arrows makes it simple to either increase or decrease rear brake pressure.

    The block accepts 3/16" brake lines and the inlets and outlets on this unit are 3/8"-24 inverted flare females.  It has two inlets from the master cylinder, two outlets to the front brakes and one outlet to the rear brakes.  It includes five stainless steel 3/16" fittings and wiring pigtail for rear brake light switch. Mounts to any convenient location. This is not a direct factory replacement for original blocks. Some line modifications may be necessary.

    910-31358 Instructions (PDF)

    Learn more about how adjustable proportioning valves work by reading our tech ar

  • Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • Aeroquip FBC0300 -3 AN TFE Braided High Pressure Hose, 1/8 Inch ID
    Aeroquip FBC0300 -3 AN TFE Braided High Pressure Hose, 1/8 Inch ID
    x
                

    Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Sold by the foot and use with either crimp or reusable fittings to make your own custom power steering line.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 6 7