Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"sprint midget brake pads" Page 1 of 3

Garage Sale (0)

  • MPD Racing Front Aluminum Drilled Brake Rotors, .380 Thick
    MPD Racing Front Aluminum Drilled Brake Rotors, .380 Thick
    x
                

    Speedway's Aluminum Sprint Brake Rotors are machined from billet plate for excellent balance, flatness, and true rotation. Rugged construction resists thermal distortion. Fits popular 3 x 5" Sprint & Midget front hubs.

    Works best with Speedway 156 pads or Wilwood PolyMatrix Q pads.

    Aluminum Rotors Application Chart

  • Wilwood 150-8850 Poly-D 10 Double Quick Change Brake Pad
    Wilwood 150-8850 Poly-D 10 Double Quick Change Brake Pad
    x
                

    Double Quick-Change pads are compatible with our Wilwood Forged Dynalite and Billet Dynalite calipers.

    • Medium friction, low to medium temperarture range.
    • Good cold torque response.
    • Low to moderate wear rate

    Pads are sold each. (Will need 2 per caliper.)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Speedway 338 Medium Double Quick Change Brake Pad
    Speedway 338 Medium Double Quick Change Brake Pad
    x
                

    Double Quick-Change pads are compatible with our Wilwood Forged Dynalite and Billet Dynalite calipers.

    Pads are sold each. (Will need 2 per caliper.)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Wilwood 160-3411 Front Aluminum Drilled Brake Rotor, 10.2 x .312 Inch
    Wilwood 160-3411 Front Aluminum Drilled Brake Rotor, 10.2 x .312 Inch
    x
                

    Wilwood's 3 hole mount aluminum brake rotors are precision CNC machined from high strength billet plate. Full symmetrical machining provides perfect balance, perfect flatness and the truest rotation of any rotor being built. These rotors fit the popular 3 x 5.00" mount bolt circle found on most sprint and midget front hubs.

    • Works best with Speedway 156 pads or Wilwood PolyMatrix Q pads
    • Drill-and-relief slot pattern produces the highest degree of weight reduction
    • Highest resistance to thermal distortion in the contact faces
    • Smooth engagement and a consistent full pedal
    • Low kick-back characteristics
    • Durable black anodized finish prevents corrosion and simplifies visual inspection of the contact faces
    • Front mounted
    • Threads:  Thru
    • Face: drilled
    Rotor Dimensions Diagram

    Aluminum Rotor Application Chart (GIF)

  • Wilwood 150-9766K Dynapro Brake Pads for Aluminum Rotor
    Wilwood 150-9766K Dynapro Brake Pads for Aluminum Rotor
    x
                

    Specifically designed compound for use with aluminum rotors. Offers low abrasion on both un-anodized and anodized surfaces. Medium friction compound with good cold response.

    • Light Duty for Sprint, Midget, etc… Dirt or Pavement
    • Moderate friction on Aluminum Rotors without damage
    • Moderte wear rate
    • Moderate friction on Aluminum Rotors without damage
    • Sold in set of 4 pads

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • QTM 500-4005 Sprint Car Racing Front Replacement Brake Pads
    New
    QTM 500-4005 Sprint Car Racing Front Replacement Brake Pads
    x
                These Sprint racing brake pads are designed for use with dirt  rear outboard and front brake kits.  They are a replacement front pad  for QTM brake kits.
    • Aggressive compound racing pad with a good low and high temperature coefficient of friction
    • Long life
    • Replacement for Sprint QTM kits
    • Sold as 1 set (2 pads)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood Midget Inboard Brake Kit
    Wilwood Midget Inboard Brake Kit
    x
                

    .350" x 10.50" drilled steel rotor. 31-spline axle hub for use with all 6" on 5 1/2" bolt circle rotors. Dynalite caliper and pads.

    The Billet Dynalite caliper is powerful, compact and super lightweight. Advanced computer engineering keeps this caliper extremely rigid, resulting in incredible brake torque at a bare minimum in weight, starting at 2.66 pounds. Internal fluid crossover eliminates external tubes and the four position, two-piece bleed screws allow for convenient mounting and easy bleeding. The Billet Dynalite uses standard quick change Dynalite pads, deep cup stainless steel pistons and high temperature seals, and has a black anodized finish. The time proven Dynalite caliper design is stronger and lighter than ever - ideal for Late Models, Modifieds, Sprints, Road Racers and Dragsters.

    Wilwood's steel rotors have applications in all types of motorsports. Weighing in at 4.7 lbs these steel rotors provide a durable lightweight option in applications where sustained temperatures remain in the low to moderate range, and high heat spikes are only observed on an intermittent basis. With their 6" on 5 1/2" bolt centers these rotors can stop anything from a hard stopping drag race car at the end of a quarter mile, or a high speed stock car coming in from a qualifier at a super speedway. Steel rotors can also be found in lighter weight open wheel cars such as sprints and modifieds, and a variety of light weight, open

  • Ultra Lite Midget Sprint Inboard Brake Kit, Standard Steel Rotor, 2 Bolt Mt.
    Ultra Lite Midget Sprint Inboard Brake Kit, Standard Steel Rotor, 2 Bolt Mt.
    x
                

    Save weight and increase braking with this lightweight rear brake kit.  The .810"x 10.4" rotor is ceramic coated for durability and performance and is mated to a billet caliper.  The NEW improved FeatherLite Sprint Inboard caliper uses three retaining pins to secure the brake pads.  Also NEW is the heavy duty 4 bolt Inboard Caliper Bracket available for both standard and small bells.  The FeatherLite Caliper combined with our Ceramic Coated Steel Rotor offers the best braking ability for your Sprint Car!

    Ultra Lite Midget Sprint Featherweight Inboard Brake Kit, Standard Steel Rotor, 2 Bolt Mount

    Lightest rotating mass of any .810 sprint car brake.  4 piston caliper and brackets.

    Includes:

    • (1) rotor
    • (2) pads
    • (1) caliper
    • bracket
    • clamp
    • hardware

     

  • Ultra Lite 410-8100 Midget Sprint Inboard Brake Kit, Titanium Rotor
    Ultra Lite 410-8100 Midget Sprint Inboard Brake Kit, Titanium Rotor
    x
                

    Save weight and increase braking with this lightweight rear brake kit.  The .810"x 10.4" rotor is ceramic coated for durability and performance and is mated to a billet caliper.  The NEW improved FeatherLite Sprint Inboard caliper uses three retaining pins to secure the brake pads.  Also NEW is the heavy duty 4 bolt Inboard Caliper Bracket available for both standard and small bells.  The FeatherLite Caliper combined with our Ceramic Coated Titanium Rotor offers the best braking ability for your Sprint Car!

    Ultra Lite Midget Sprint Inboard Brake Kit, Standard Titanium Rotor, 2 Bolt Mount

    Lightest rotating mass of any .810 sprint car brake. Weighs only 2 lb, 11 oz for titanium. 4 piston caliper and brackets.

    Includes:

    • (1) rotor
    • (2) pads
    • (1) caliper
    • bracket
    • clamp
    • hardware
  • Speedway 156 Hard Brake Pad
    $8.99
    Speedway 156 Hard Brake Pad
    x
                

    For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

    .450" thick, 1.97" long, 589 A Compound

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Speedway 338 Medium Brake Pad
    Speedway 338 Medium Brake Pad
    x
                

    For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

    .450" thick, 1.97" long, 589 A Compound

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Wilwood 150-2390 Gator Brake Pad
    Wilwood 150-2390 Gator Brake Pad
    x
                

    For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

    • .450" thick, 1.97" long, 589 A Compound
    • Medium friction, low to medium temperarture range.                       
    • Good cold torque response.
    • Low to moderate wear rate

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Speedway Midget Axle Assembly for Stealth/TCR Chassis
    Speedway Midget Axle Assembly for Stealth/TCR Chassis
    x
                You get everything shown, but you do the assembly. Speedway's 44" 4130 front axle, steel king pins, aluminum spindles with seel snouts, aluminum steering arms, Winters direct mount hubs, LF brake bracket, LF aluminum brake rotor, rotor bolts, LF two piston caliper, brake pads, aluminum tie rod, aluminum heims, aluminum jam nuts, grade 8 bolt and nut kit. 
            
  • Stallard Mini/Micro Sprint Aluminum Brake Pad Shims
    New
    Stallard Mini/Micro Sprint Aluminum Brake Pad Shims
    x
                
    Get the most out of your worn brake pads! Place these aluminum spacer plates between the caliper piston and the pad. This allows the piston to stay more firmly seated while using the remainder of the pad surface and allows you to use different thickness pads or rotors.
    • For calipers with 2" pads
    • .05" thickness

     

  • Wilwood 120-9689 Billet Dyna Pro Single Caliper, 3-3/4 Inch Mount
    Wilwood 120-9689 Billet Dyna Pro Single Caliper, 3-3/4 Inch Mount
    x
                

    The Dyna Pro Single (DPS) billet caliper is the newest generation of calipers available as an upgrade or replacement for applications previously using the Dynalite Single (DLS) series. DPS calipers combine superior strength with performance enhancements to make these the best "Dyna" series calipers ever.

    The DPS is loaded with exclusive Wilwood performance enhancements. The calipers feature Quick-E-Clip pad retainers that support a 6812 type brake pad from the top. In addition to past pad service without caliper removal, the feature provides substantially stronger retention over the single Quick-Clip pin and 7012 type pads used in the previous DLS models.

    • Quick-E-Clip pad retainers supports brake pad from top
    • Heavy wall stainless steel pistons
    • Stainless steel SRS bridge plates eliminate pad rattle and dampen vibration
    • Internal fluid passages
    • Four corner bleed screws allow mounting in any front, rear, left, or right side position

     

  • Wilwood 150-2391 Gator Double Quick Change Brake Pad
    Wilwood 150-2391 Gator Double Quick Change Brake Pad
    x
                

    Double Quick-Change pads are compatible with our Wilwood Forged Dynalite and Billet Dynalite calipers.

    • Medium friction, low to medium temperarture range.
    • Good cold torque response.
    • Low to moderate wear rate

    Pads are sold each. (Will need 2 per caliper.)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 15B-9819 Poly-B 10 Brake Pad
    Wilwood 15B-9819 Poly-B 10 Brake Pad
    x
                

    For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

    • .450" thick, 1.97" long, 589 A Compound
    • Medium friction, low to medium temperarture range.                       
    • Good cold torque response.
    • Low to moderate wear rate

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 140-12958 Dynapro Single Midget Alum Left Front Brake Kit
    New
    Wilwood 140-12958 Dynapro Single Midget Alum Left Front Brake Kit
    x
                

    The Dynapro Single Left Front Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force.  Kits come complete with caliper, brake pads, caliper mounting brackets, caliper mount bolt kit, rotor and rotor mounting hardware.

    • Nickle plated dynalite single caliper
    • 10.2" drilled aluminum front rotor
    • Complete with brake pads, brackets, and bolts
    • Caliper:
      • Type:  Dynapro Single
      • Finish:  Nickel Plated
      • Piston Count:  2
      • Piston Type:  Stainless
      • Mount Type:  Lug
      • Pad Compound:  Polymatrix Q
    • Rotor:
      • Type:  Aluminum
      • Style:  Drilled
      • Finish:  Black Electro Coat
      • Material: Aluminum
      • Diameter:  10.20"
      • Width:  .310"
      • Vane Count: Solid
      • Design Type:  Aluminum
  • Speedway 338 Medium Superlite Brake Pad
    Speedway 338 Medium Superlite Brake Pad
    x
                

    Replacement brake pads for your Wilwood Superlite or Ultra Lite 300 Series calipers. 

    • Width 4.74"

    Pads are sold individually.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 15Q-10144 Poly-Q Brake Pad
    Wilwood 15Q-10144 Poly-Q Brake Pad
    x
                

    For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

    • .450" thick, 1.97" long, 589 A Compound
    • Medium friction, low to medium temperarture range.                       
    • Good cold torque response.
    • Low to moderate wear rate
    • Best for aluminum rotors

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 15E-7266K NDL/Dynalite Bridge Bolt Brake Pads, Dynapro Poly-E
    Wilwood 15E-7266K NDL/Dynalite Bridge Bolt Brake Pads, Dynapro Poly-E
    x
                

    Replacement brake pads for your Wilwood NDL or Dynalite calipers (or comparable Ultra Lite calipers). 

    • Width 4.00"
    • Medium friction, high effective temperarture range in medium temperature pad group.
    • Smooth engagement, Flat torque curve
    • Low wear rate

    Pads will fit:

    • Wilwood Billet NDL calipers
    • Wilwood Forged NDL calipers
    • Wilwood Dynalite calipers w/ Bridge Bolt
    • Ultra Lite UL-237

    Tech Tip:  Only use full metallic pads on ceramic coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Hawk HB101M.800 Black Superlite Brake Pads, ST/4
    Hawk HB101M.800 Black Superlite Brake Pads, ST/4
    x
                

    Hawk Performance has dominated motorsport race tracks since 1990, offering highly-engineered friction products for nearly every type of racing! Upgrade your Wilwood NDL, Dynalite or Ultra Lite calipers with Hawk Performance pads. 

    Hawk Black:
    • Medium torque and temperature compound
    • Designed to be a good, all-purpose low-cost racing brake pad
    • Can be used as in Dirt Circle Track and Stock Car applications
    • Width 4.00"
    • Pads sold in sets of 4 (does one axle).

    Brake Pads fit: 

    • Wilwood Superlite Calipers
    • Ultra Lite 300 Series Calipers

    Tech Tip:  Only use full metallic pads on ceramic coated rotors.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Hawk HB101L.800 Blue MT4 Superlite Brake Pads, ST/4
    Hawk HB101L.800 Blue MT4 Superlite Brake Pads, ST/4
    x
                

    Hawk Performance has dominated motorsport race tracks since 1990, offering highly-engineered friction products for nearly every type of racing! Upgrade your Wilwood NDL, Dynalite or Ultra Lite calipers with Hawk Performance pads.

    Hawk MT4:

    • Medium/High torque and temperature compound
    • Medium/High initial bite
    • Brake pads designed for circle track cars under 2800 lbs without high deceleration rates
    • Width 4.00"
    • Pads sold in sets of 4 (does one axle).

    Brake Pads fit: 

    • Wilwood Superlite Calipers
    • Ultra Lite 300 Series Calipers

    Tech Tip:  Only use full metallic pads on ceramic coated rotors.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Ultra Lite Brakes UL 101 300 Series Brake Pads
    Ultra Lite Brakes UL 101 300 Series Brake Pads
    x
                

    Replacement brake pads for your Wilwood Superlite or Ultra Lite 300 Series calipers. 

    • Width 4.74"

    Pads are sold individually.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Wilwood 15E-9837K NDL/Dynalite Bridge Bolt Brake Pads-Poly-E .490 Inch
    Wilwood 15E-9837K NDL/Dynalite Bridge Bolt Brake Pads-Poly-E .490 Inch
    x
                

    Replacement brake pads for your Wilwood NDL or Dynalite calipers (or comparable Ultra Lite calipers). 

    • Width 3.96"
    • High friction throughout temperature range, High temperature range.
    • Formulation specific for use with Polymetalic coated rotors

    Pads will fit:

    • Wilwood Billet NDL calipers
    • Wilwood Forged NDL calipers
    • Wilwood Dynalite calipers w/ Bridge Bolt
    • Ultra Lite UL-237

    Tech Tip:  Only use full metallic pads on ceramic coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)  

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 150-8946K NDL/Dynalite Bridge Bolt Brake Pads, BP-10
    Wilwood 150-8946K NDL/Dynalite Bridge Bolt Brake Pads, BP-10
    x
                

    Replacement brake pads for your Wilwood NDL or Dynalite calipers (or comparable Ultra Lite calipers). 

    • Width 4.00"
    • Medium friction compound with the low noise and low dust of a street performance compound and the increased friction characteristics of a semi-metallic race compound
    • Good low to middle temperature wear rates
    • Formulation specific for use with Polymetallic coated rotors

    Pads will fit:

    • Wilwood Billet NDL calipers
    • Wilwood Forged NDL calipers
    • Wilwood Dynalite calipers w/ Bridge Bolt
    • Ultra Lite UL-237

    Tech Tip:  Only use full metallic pads on ceramic coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)  

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 15B-7264K NDL/Dynalite Bridge Bolt Brake Pads, Dynapro Poly-B
    Wilwood 15B-7264K NDL/Dynalite Bridge Bolt Brake Pads, Dynapro Poly-B
    x
                

    Replacement brake pads for your Wilwood NDL or Dynalite calipers (or comparable Ultra Lite calipers). 

    • Width 4.00"
    • High friction throughout temperature range, High temperature range.
    • Formulation specific for use with Polymetalic coated rotors

    Pads will fit:

    • Wilwood Billet NDL calipers
    • Wilwood Forged NDL calipers
    • Wilwood Dynalite calipers w/ Bridge Bolt
    • Ultra Lite UL-237

    Tech Tip:  Only use full metallic pads on ceramic coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)  

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.      

  • Wilwood 150-9136K NDL/Dynalite Bridge Bolt Brake Pads, Dyna Pro BP-10
    Wilwood 150-9136K NDL/Dynalite Bridge Bolt Brake Pads, Dyna Pro BP-10
    x
                

    Replacement brake pads for your Wilwood NDL or Dynalite calipers (or comparable Ultra Lite calipers). 

    • Width 4.00"
    • Medium friction compound with the low noise and low dust of a street performance compound and the increased friction characteristics of a semi-metallic race compound
    • Good low to middle temperature wear rates
    • Formulation specific for use with Polymetallic coated rotors

    Pads will fit:

    • Wilwood Billet NDL calipers
    • Wilwood Forged NDL calipers
    • Wilwood Dynalite calipers w/ Bridge Bolt
    • Ultra Lite UL-237

    Tech Tip:  Only use full metallic pads on ceramic coated rotors.

    Brake Pad Brochure (PDF) 

    Brake Pad Brand Guide (Link)  

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

Goto Previous PagePrevious Page
1 2 3