Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"spring shackle bushings" Page 1 of 3

  • Speedway Heavy Duty Chrysler Type Leaf Spring Sliders
    Speedway Heavy Duty Chrysler Type Leaf Spring Sliders
    x
                

    Leaf spring sliders bolt on in place of shackles. Heavy duty versions feature roller bearings that keep car from binding up during suspension movement. Comes with brass bushing for 1" I.D. spring eye.

    Designed for Chrysler type mono-leaf and multi-leaf racing springs. They must be altered and modified to work with the Camaro/Nova/Firebird leaf springs.

    • Eliminates "jacking" problem associated with loading & unloading of the shackles
    • Helps maintain consistent spring rate for predictable handling
    • More rigid than typical shackle/bushing combination
    • Requires periodic lubrication of the bearings

    Leaf Spring Slider Tech (GIF)

  • Replacement Nylon Shackle Bushings, 1-3/4 Inch Spring
    Replacement Nylon Shackle Bushings, 1-3/4 Inch Spring
    x
                

    These nylon replacement shackle bushing sets consist of (8) bushings which will fit 1 pair of shackles. Bushings are for a 3/4" spring eye or perch and accept shackles having 1/2" shaft or bolt. 

    Fits Speedway shackles:

    • 91033323-CHR
    • 91033323-SS
    • 91033323-ZINC

     

  • Nylon Shackle Kits, 1-3/4 Inch Wide Spring
    Nylon Shackle Kits, 1-3/4 Inch Wide Spring
    x
                

    Fits front or rear springs. All measurements are width of spring. All nylon bushed shackles are 1-1/2" shackle bolt center to shackle bolt center.

    Bushings are included. Bushing O.D. is 3/4".

     

    Leaf Spring Measuring Guide (Link)

  • Bronze Replacement Shackle Bushings for 2 Inch Shackle
    Bronze Replacement Shackle Bushings for 2 Inch Shackle
    x
                These bronze replacement shackle bushing sets  consist of (8) bushings which will fit 1 pair of shackles. Bushings are  for a 3/4" spring eye or perch and accept shackles having 1/2" shaft or  bolt.

    Fits Speedway shackles:

        91033324-CHR
        91033324-SS
        91033324-ZINC
  • Bronze Replacement Shackle Bushings for 2-1/4 Inch Shackle
    Bronze Replacement Shackle Bushings for 2-1/4 Inch Shackle
    x
                These bronze replacement shackle bushing sets  consist of (8) bushings which will fit 1 pair of shackles. Bushings are  for a 3/4" spring eye or perch and accept shackles having 1/2" shaft or  bolt.

    Fits Speedway shackles:

        91033325-CHR
        91033325-SS
        91033325-ZINC
  • Bronze Replacement Shackle Bushings for 1-3/4 Inch Shackle
    Bronze Replacement Shackle Bushings for 1-3/4 Inch Shackle
    x
                These bronze replacement shackle bushing sets  consist of (8) bushings which will fit 1 pair of shackles. Bushings are  for a 3/4" spring eye or perch and accept shackles having 1/2" shaft or  bolt. 

    Fits Speedway shackles:

        91033323-CHR
        91033323-SS
        91033323-ZINC
  • Replacement Nylon Shackle Bushings, 2 Inch Spring
    Replacement Nylon Shackle Bushings, 2 Inch Spring
    x
                These nylon replacement shackle bushing sets consist of (8) bushings which will  fit 1 pair of shackles. Bushings are for a 3/4" spring eye or perch and  accept shackles having 1/2" shaft or bolt.   

    Fits Speedway shackles:

    • 91033324-CHR
    • 91033324-SS
    • 91033324-ZINC

     

  • Nylon Shackle Kits, 2 Inch Wide Spring
    Nylon Shackle Kits, 2 Inch Wide Spring
    x
                

    Fits front or rear springs. All measurements are width of spring. All nylon bushed shackles are 1-1/2" shackle bolt center to shackle bolt center.

    Bushings are included. Bushing O.D. is 3/4".

     

    Leaf Spring Measuring Guide (Link)

  • Replacement Nylon Shackle Bushings, 2-1/4 Inch Spring
    Replacement Nylon Shackle Bushings, 2-1/4 Inch Spring
    x
                These nylon replacement shackle bushing sets consist of (8) bushings which will fit 1 pair of shackles. Bushings are for a 3/4" spring eye or perch and accept shackles having 1/2" shaft or bolt.  

    Fits Speedway shackles:

    • 91033325-CHR
    • 91033325-SS
    • 91033325-ZINC

     

  • 2-1/2 Inch Rear Spring Shackles
    2-1/2 Inch Rear Spring Shackles
    x
                
    • For 2.5" wide leaf springs
    • 1" bushing
    • 2.5" center to center
    • Sold as a pair
  • Nylon Shackle Kits, 2-1/4 Inch Wide Spring
    Nylon Shackle Kits, 2-1/4 Inch Wide Spring
    x
                

    Fits front or rear springs. All measurements are width of spring. All nylon bushed shackles are 1-1/2" shackle bolt center to shackle bolt center.

    Bushings are included. Bushing O.D. is 3/4".

     

    Leaf Spring Measuring Guide (Link)

  • AFCO 20235-4 Aluminum Shackle Bushing
    AFCO 20235-4 Aluminum Shackle Bushing
    x
                

    Eliminates the need for rubber bushings in Chrysler rear spring eye.  Prevents binding and eases leaf spring maintenance.

    The spacer is 2-1/2" long and 1" o.d.

  • 1955 Chevy Rear Leaf Spring Shackles, Passenger Car
    1955 Chevy Rear Leaf Spring Shackles, Passenger Car
    x
                

    These replacement stock style rear shackles are designed for use on 1955 Chevy passenger cars.  Sold as a pair.

    • Bushing O.D. on both ends is 1.092 for spring and frame mount.
    • Bushing O.D. on both ends at outside ends is 1.231"
    • Designed for a 2" wide spring and frame mount
    • Center to center of shackle bolts is 3 1/4"
    • Shackle plates are not parallel and NOT stepped as on the 56 and 57 shackles.

     

  • 1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Plain Steel
    1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Plain Steel
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 46" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles. 

    Each kit includes:

    • 46" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 29" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Chrome Steel
    1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Chrome Steel
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 46" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles. 

    Each kit includes:

    • 46" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 29" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • Chrome 1932-34 Ford 4-Bar I-Beam Axle Kit, Ford Spindle
    Chrome 1932-34 Ford 4-Bar I-Beam Axle Kit, Ford Spindle
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly
  • Plain 1932-34 Ford 4-Bar I-Beam Axle Kit, Ford Spindle
    Plain 1932-34 Ford 4-Bar I-Beam Axle Kit, Ford Spindle
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly
  • 1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Plain
    1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Plain
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • Model A to 1934 Ford 46 Inch I-Beam Axle Radius Rod Kit
    Model A to 1934 Ford 46 Inch I-Beam Axle Radius Rod Kit
    x
                

    Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. I-Beam axles require '37-'48 Ford passenger car spindles. Kits are available in plain steel.

    Each kit includes:

    • 46" kingpin-to-kingpin I-beam axle, 4" dropped
    • 27" hairpin radius rods
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 29-1/4" eye-to-eye Super Glide spring, 1-3/4" wide
    • All hardware for assembly
  • Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Chrome
    Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Chrome
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits. Each kit includes a 48" wide, 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly.

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

  • Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Plain
    Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Plain
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits. Each kit includes a 48" wide, 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly.

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

  • Speedway Chrysler Type Leaf Spring Shackle
    Speedway Chrysler Type Leaf Spring Shackle
    x
                

    These rear shackles include the necessary bushings and are designed for Chryslers.

    • 4-7/8" large mount width
    • 3" small mount width
    • 3" center-to-center
  • AFCO 20236S Chrysler Roller Bearing Leaf Spring Slider
    AFCO 20236S Chrysler Roller Bearing Leaf Spring Slider
    x
                Leaf spring sliders bolt on in place of shackles. Heavy duty versions feature roller bearings that keep car from binding up during suspension movement. Designed and intended to work only with the Chrysler type mono-leaf and multi-leaf racing springs. 
    • 3-1/2" wide
    • 6-5/16" long
    • 2-9/16" tall
    • Width of flange is 4-1/2"
    • Mounting holes on width are 1-13/16" center to center
    • Mounting holes on length are 3" and 5-1/16"
    • Comes with brass bushing for 1" I.D. spring eye

    Leaf Spring Slider Tech (GIF)

  • Speedway 1970-75 Camaro Leaf Spring Shackle
    Speedway 1970-75 Camaro Leaf Spring Shackle
    x
                These rear shackles include the necessary bushings and are designed for 1970-1975 Camaros. Shackle plate inside width is 4.325." Measures 3 3/8" center to center.
            
  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

     

  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Plain
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Plain
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

     

  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

    Note: On 916-39521, the spring and frame bracket are Chrome, not Stainless steel.

     

  • Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Plain
    Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Plain
    x
                

    Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. I-Beam axles require '37-'48 Ford passenger car spindles. Kits are available in Plain steel or Chrome.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" dropped
    • 27" hairpin radius rods
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide spring, 1-3/4" wide
    • All hardware for assembly

    916-39506 Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF)

  • Semi-Elliptical Straight Axle Kit for Ford Spindle
    Semi-Elliptical Straight Axle Kit for Ford Spindle
    x
                

    If you are looking for that "up in the front" gasser look or just need a straight axle, we've got your deal! We can supply you a complete semi-elliptical straight axle front end kit with springs and hardware. For 1937-41 Ford style spindles.

    Gasser Build Info (PDF)

    Plain steel, universal application, professionally engineered. The spring pads are adjustable on the axle for different frame widths (welding required). Choose axle length from kingpin to kingpin, or order a custom length.

    Kit includes:

    • tube axle w/ welded ends (0.250" wall tubing)
    • two axle pads and U-bolts
    • two 1-3/4" spring shackles w/ nylon bushings
    • two frame mounting brackets
    • two 32" six-leaf springs
    • all hardware
    916-3903 Instructions (PDF)
  • Semi-Elliptical Straight Axle Kit for Chevy Spindle
    Semi-Elliptical Straight Axle Kit for Chevy Spindle
    x
                

    If you are looking for that "up in the front" gasser look or just need a straight axle, we've got your deal! We can supply you a complete semi-elliptical straight axle front end kit with springs and hardware. Designed for use with Speedway 1949-54 Chevy-style passenger car spindles.

    Gasser Build Info (PDF)

    Plain steel, universal application, professionally engineered. The spring pads are adjustable on the axle for different frame widths (welding required). Choose axle length from kingpin to kingpin, or order a custom length.

    Kit includes:

    • tube axle w/ welded ends (0.250" wall tubing)
    • two axle pads and U-bolts
    • two 1-3/4" spring shackles w/ nylon bushings
    • two frame mounting brackets
    • two 32" six-leaf springs
    • all hardware
    916-3903 Instructions (PDF)
  • Posies Super Slide Springs 205 1955-57 Chevy Sedan Leaf Springs-3 Inch Drop
    Posies Super Slide Springs 205 1955-57 Chevy Sedan Leaf Springs-3 Inch Drop
    x
                By die-forming a pocket in each leaf and installing a moly-nylon button, these Posies springs give you a much smoother and comfortable ride. Four-leaf design for 1955-57 Chevy 2-door sedans.

    Springs measure 54-3/4" eye to eye and are 2" wide. Front eye is bushed and sleeved for stock bolt and rear eye is open to accept stock shackle bushing.
  • Posies Super Slide Springs 210 55-57 Chevy Sedan Leaf Springs, Stock Height
    Posies Super Slide Springs 210 55-57 Chevy Sedan Leaf Springs, Stock Height
    x
                By die-forming a pocket in each leaf and installing a moly-nylon button, these Posies springs give you a much smoother and comfortable ride. Four-leaf design for 1955-57 Chevy 2-door sedans.

    Springs measure 54-3/4" eye to eye and are 2" wide. Front eye is bushed and sleeved for stock bolt and rear eye is open to accept stock shackle bushing.
  • Spring-Behind 4 Inch Drop Tube Axle Front End for Ford Spindles, Plain
    Spring-Behind 4 Inch Drop Tube Axle Front End for Ford Spindles, Plain
    x
                

    For 1937-1948 early Ford passenger car spindles. Maximum car weight 2500 lbs.  Plain steel construction.

    Kit includes:

    • Two 1-3/4" spring shackles w/ nylon bushings
    • Two spring pivots
    • 26" 4-leaf spring w/ nylon buttons
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" dropped
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" Heims with jam nuts
    • Spring U-bolts sold separately

    Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF) 

  • Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Stainless
    Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Stainless
    x
                

    For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4 leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately
Goto Previous PagePrevious Page
1 2 3