Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"speedway mustang ii crossmembers" Page 1 of 3

  • Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    x
                Please view the product's page for more information
            
  • Speedway Mustang II Tubular Upper Control Arm, Stock Width
    Speedway Mustang II Tubular Upper Control Arm, Stock Width
    x
                

    You don't have to look any farther for tubular control arms for your hot rod. Full .120 wall, 1" diameter tubing, fixture welded and features screw-in ball joints and no-squeak bushings. Will work with nearly any stock or aftermarket crossmember.

    Replaces 1974-80 Pinto, Bobcat and 1974-78 Mustang II control arms.

    • Full .120" wall
    • 1" diameter tubing
    • Fixture welded
    • Screw-in ball joints
    • No-squeak bushings
    • Works with all Mustang II crossmembers we sell

    Note: This item is sold individually.

    910-34320 Tubular Upper Control Arm Instructions (PDF)

    Tubular Control Arm Chart (GIF)

    Check out our 5/8" narrower than stock width upper control arms (91034326) for applications that require a shorter track width.  These allow you to tuck the wheels up under the fenders without having to buy expensive special offset wheels.

  • Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    x
                

    These Speedway Mustang IFS kits for 1949-1954 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1949-1954 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a

  • Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    x
                

    These Speedway Mustang IFS kits for 1940-46 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1940-1946 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get

  • Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    x
                

    These Speedway Mustang IFS kits for 1937-39 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1939 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a "

  • Speedway 1953-1956 Ford F-100 Truck Mustang II Crossmember
    Speedway 1953-1956 Ford F-100 Truck Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • 1948-1952 Ford Truck Speedway Deluxe Mustang II Crossmember
    1948-1952 Ford Truck Speedway Deluxe Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Speedway Mustang II Crossmember-Ford Frame-35-40 Car-35-41 Pickup-DLX
    Speedway Mustang II Crossmember-Ford Frame-35-40 Car-35-41 Pickup-DLX
    x
                Please view the product's page for more information
            
  • Mustang II IFS, Std. Tubular Control Arms, Stock Springs, Dropped Spindles
    Mustang II IFS, Std. Tubular Control Arms, Stock Springs, Dropped Spindles
    x
                Includes standard upper and offset strutless lower control arms, 2" dropped spindles, rubber brake lines, new black stock type springs and  shocks, new manual or rebuilt power rack & pinion with bushings and  new tie rods. The 11" brake kit features GM Metric calipers, with your  choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Stock Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-

  • Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
    Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
    x
                

    Includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, new black stock type springs and shocks, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles, Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2&qu

  • Speedway 1941-1948 Ford Mustang II Deluxe Steel Crossmember
    Speedway 1941-1948 Ford Mustang II Deluxe Steel Crossmember
    x
                Please view the product's page for more information
            
  • Speedway 1933-34 Ford Mustang II Crossmember
    Speedway 1933-34 Ford Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Speedway 1955-1959 Chevy Truck Crossmember
    Speedway 1955-1959 Chevy Truck Crossmember
    x
                Please view the product's page for more information
            
  • 37-48 Chevy Car Crossmember
    $299.99
    Product Rating: 4.00 Stars
    37-48 Chevy Car Crossmember
    x
                

    These Speedway Mustang IFS kits for 1937-1948 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are all the special, hard-to-make brackets and mounts you will need to complete the installation, plus illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1948 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers

  • '64-'70 Mustang Crossmember
    $299.99
    Product Rating: 5.00 Stars
    '64-'70 Mustang Crossmember
    x
                Please view the product's page for more information
            
  • Speedway Mustang II Crossmember for 1962-67 Chevy II/Nova, Bolt-On
    Speedway Mustang II Crossmember for 1962-67 Chevy II/Nova, Bolt-On
    x
                Please view the product's page for more information
            
  • Speedway Mustang II Offset Tubular Control Arms, Stock Spring No Strut
    Speedway Mustang II Offset Tubular Control Arms, Stock Spring No Strut
    x
                Please view the product's page for more information
            
  • Speedway Mustang II Tubular Lower A-Arms for Coilovers, No Strut Rod
    Speedway Mustang II Tubular Lower A-Arms for Coilovers, No Strut Rod
    x
                Please view the product's page for more information
            
  • Heidts Mustang II Crossmember for 1953-56 Ford F-100 Pickup Frame, Weld-On
    Heidts Mustang II Crossmember for 1953-56 Ford F-100 Pickup Frame, Weld-On
    x
                Please view the product's page for more information
            
  • Mustang II Power and Manual Rack & Pinions
    Mustang II Power and Manual Rack & Pinions
    x
                Fits aftermarket Mustang II crossmembers. Available in manual or power steering. Mount bushings are included with the Power version, but mount bushings are NOT included in the Manual version.

    MANUAL: New manual rack and pinion steering assembly for Pinto/Bobcat/Mustang II based front suspensions in street rods and kit cars. 9/16"-26 spline input shaft. 16" mount centers. 

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    91034340 CPP Instructions (PDF)  

  • Mustang II IFS w/ New Stock Control Arms and Dropped Spindles, Air Ride
    Mustang II IFS w/ New Stock Control Arms and Dropped Spindles, Air Ride
    x
                With our complete Mustang II Independent Front Suspension kit you get    brand new stamped steel upper and lower control arms with polyurethane    bushings, 2" dropped steel spindles, Rubber Brake Lines, air springs with  shocks, new manual rack & pinion with bushings   or remanufactured  power rack & pinion with bushings and an 11"  brake  kit featuring  GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4"  bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped steel spindles
      • Air springs with shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Note: These IFS kits will require use of strut rods and brackets for the lower control arms.  These kits will work with our replacement strut rod (91034315)

  • Mustang II IFS, Std. Tubular Control Arms, Coilover Springs, Stock Spindles
    Mustang II IFS, Std. Tubular Control Arms, Coilover Springs, Stock Spindles
    x
                Hub-to-hub kit includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, Carrera coilovers, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles
      • Coilover Springs
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2" frame widths, you w

  • Mustang II IFS w/ New Stock Control Arms and Stock Spindles, Air Ride
    Mustang II IFS w/ New Stock Control Arms and Stock Spindles, Air Ride
    x
                With our complete Mustang II Independent Front Suspension kit you get   brand new stamped steel upper and lower control arms with polyurethane   bushings, new steel spindles, Rubber Brake Lines, air springs with shocks, new manual rack & pinion with bushings   or remanufactured power rack & pinion with bushings and an 11"  brake  kit featuring GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • New steel spindles
      • Air springs with shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: These IFS kits will require use of strut rods and brackets for the lower control arms.  These kits will work with our replacement strut rod

  • Heidts Mustang II Crossmember for 1948-1952 Ford Pick-Up Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1948-1952 Ford Pick-Up Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Mustang II IFS w/ New Stock Control Arms, Springs, Shocks, and Spindles
    Mustang II IFS w/ New Stock Control Arms, Springs, Shocks, and Spindles
    x
                Please view the product's page for more information
            
  • Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    x
                With our complete Mustang II Independent Front Suspension kit you get   brand new stamped steel upper and lower control arms with polyurethane   bushings, steel 2" dropped spindles, Rubber Brake Lines, Carrera coil-over shock & spring, new manual rack & pinion with bushings   or remanufactured power rack & pinion with bushings and an 11"  brake  kit featuring GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped spindles
      • Carrera coil-over shock & spring
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (

  • Mustang II IFS, Stock Control Arms, Springs, and Shocks, Dropped Spindles
    Mustang II IFS, Stock Control Arms, Springs, and Shocks, Dropped Spindles
    x
                With our complete Mustang II Independent Front Suspension kit you get  brand new stamped steel upper and lower control arms with polyurethane  bushings, steel 2" dropped spindles, Rubber Brake Lines, new black stock  type springs & shocks, new manual rack & pinion with bushings  or remanufactured power rack & pinion with bushings and an 11" brake  kit featuring GM Metric-style calipers, with your choice of 5 x 4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped spindles
      • New black stock-type springs
      • New shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    WARNING: To offer our customers a better range of spring rates, the springs

  • Speedway Mustang II Tubular Lower Control Arm for Stock, Strut Rod
    Speedway Mustang II Tubular Lower Control Arm for Stock, Strut Rod
    x
                

    You don't have to look any farther for tubular control arms for your hot rod. These tubular lower control arms are designed to be used stock style Mustang II springs and shocks as well as Mustang II crossmembers that come without the welded-in A-Arm gussets. These control arms will need strut rods for proper installation. They are designed to be used with stock style springs and shocks. Will work with nearly any stock or aftermarket crossmember. Welding may be required on some applications.

    Replaces 1974-80 Pinto, Bobcat and 1974-78 Mustang II control arms.

    • Full .120" wall
    • 1" diameter tubing
    • Fixture welded
    • Screw-in ball joints
    • No-squeak bushings
    • Designed to correspond with stock style Mustang II springs and shocks
    • Works with Mustang II crossmembers that come without lower A-Arm tabs and require strut rods
    • Choose Left or Right side

    Note: This item is sold individually.

    Tubular Control Arms Application Chart (GIF)

    910-34327 Tubular Lower Control Arm Instructions

  • Mustang II IFS w/ New Stock Control Arms and Spindles, Coilover Shocks
    Mustang II IFS w/ New Stock Control Arms and Spindles, Coilover Shocks
    x
                Please view the product's page for more information
            
  • Mustang II IFS, Narrow Control Arms, Coilover Springs, Dropped Spindles
    Mustang II IFS, Narrow Control Arms, Coilover Springs, Dropped Spindles
    x
                Hub-to-hub kit includes 5/8" narrower upper and offset strutless lower control arms, 2" dropped spindles, rubber brake lines, Carrera  coilovers, new manual or rebuilt power rack & pinion with  bushings and  new tie rods. The 11" brake kit features GM Metric  calipers, with your  choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Carrera Coilovers
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers

  • Speedway Mustang II Tubular Upper Control Arm, 5/8 Inch Narrower
    Speedway Mustang II Tubular Upper Control Arm, 5/8 Inch Narrower
    x
                Please view the product's page for more information
            
  • Mustang II IFS, Tubular Control Arms, Coilover Springs, Dropped Spindles
    Mustang II IFS, Tubular Control Arms, Coilover Springs, Dropped Spindles
    x
                Hub-to-hub kit includes tubular upper and offset strutless lower control arms, new standard spindles, rubber brake lines, 2" dropped spindles, Carrera coilovers, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Carrera Coilovers
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2&qu

  • Mustang II IFS, Narrow Control Arms, Stock Springs, Dropped Spindles
    Mustang II IFS, Narrow Control Arms, Stock Springs, Dropped Spindles
    x
                Includes 5/8" narrower upper and offset strutless lower control arms, 2" dropped spindles, rubber brake lines, new black stock type springs and  shocks, new manual or rebuilt power rack & pinion with bushings and  new tie rods. The 11" brake kit features GM Metric calipers, with your  choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" Narrower Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Stock Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal c

  • Mustang II IFS, Narrow Tubular Control Arms, Stock Springs and Spindles
    Mustang II IFS, Narrow Tubular Control Arms, Stock Springs and Spindles
    x
                

    Includes 5/8" narrower upper and offset strutless lower control arms, new standard spindles, rubber brake lines, new black stock type springs and shocks, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles, Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers fo

  • Mustang II IFS, Narrow Control Arms, Coilover Springs, Stock Spindles
    Mustang II IFS, Narrow Control Arms, Coilover Springs, Stock Spindles
    x
                Please view the product's page for more information
            
  • Mustang II IFS, Std. Control Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    Mustang II IFS, Std. Control Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes standard upper and offset strutless lower  control arms, new 2"  dropped spindles, rubber brake lines, air ride  springs/shocks, new manual or rebuilt power rack & pinion with  bushings and  new tie rods. The 10-3/4" Wilwood brake kit features GM   Metric calipers with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x  4-3/4" bolt  pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New 2" Dropped Spindles
      • Air Ride Springs/Shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM Metric calipers
      • Choose 5 x 4-1/2" or 5 x 4-3/4" bolt pattern
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossm

  • Mustang II IFS, Std. Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    Mustang II IFS, Std. Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes standard upper and offset strutless lower control arms, new  standard spindles, rubber brake lines, air ride springs/shocks, new manual or rebuilt power rack & pinion with bushings and  new tie rods. The 10-3/4" Wilwood brake kit features GM  Metric calipers with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt  pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles
      • Air Ride Springs/Shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM Metric calipers
      • Choose 5 x 4-1/2" or 5 x 4-3/4" bolt pattern
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford P

  • Mustang II IFS, Narrow Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    Mustang II IFS, Narrow Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes 5/8" narrower upper and offset strutless  lower  control arms, 2" dropped spindles, rubber brake lines, air ride  , new manual or rebuilt power rack & pinion with  bushings  and   new tie rods. The 10-3/4" Wilwood brake kit features GM  Metric calipers  with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt   pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Air Ride Suspension shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959

  • Speedway Mustang II Tubular Upper Control Arms, 5/8 Inch Narrower
    Speedway Mustang II Tubular Upper Control Arms, 5/8 Inch Narrower
    x
                Please view the product's page for more information
            
  • Mustang II IFS, Short Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    Mustang II IFS, Short Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    x
                

    Hub-to-hub kit includes 5/8" narrower upper and offset strutless lower control arms, new standard spindles, rubber brake lines, air ride , new manual or rebuilt power rack & pinion with bushings and new tie rods. The 10-3/4" Wilwood brake kit features GM Metric calipers with rubber hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • New Standard Spindles
      • Air Ride Suspension shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Picku

Goto Previous PagePrevious Page
1 2 3