Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"speedway mustang ii brake pads" Page 1 of 1

New (0)

On Sale (0)

Garage Sale (0)

  • Brake Pads for Mustang II Caliper
    Brake Pads for Mustang II Caliper
    x
                

    Our street compound brake pads provide safe, quiet, and reliable performance. For Mustang II and Pinto calipers.

    Complete set of 4 pads (services 2 calipers).

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • 1932 Lo-Boy Front Disc Brake Kit
    1932 Lo-Boy Front Disc Brake Kit
    x
                

    This brake kit includes Mustang II/Pinto brake components to fit the '32 Lo-Boy 1949-54 Chevy spindles. Kit features 9-1/4" iron rotors, rebuilt single piston calipers, pads, stainless braided AN 4 brake lines, fittings, & hardware.

    NOTE: Kit includes rotors with 5 on 4.5" bolt pattern. If you need the 5 on 4.75" bolt pattern, please specify this in the Comments box on the Order Summary/Payment Info page (page 2) when checking out.

     

  • Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    x
                Upgrade your Mustang II based suspension from the stock 9-1/4" rotors to our 11" rotors with powerful single piston GM metric floating calipers. This simple bolt-on conversion requires no machining. For use on 1974-80 Pinto, Bobcat and Mustang II spindles.

    Features a 5 on 4-1/2" Ford/Mopar wheel bolt pattern (increases track width 1/2" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31944 Instructions (PDF)

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31955 Instructions (PDF)

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31956 Instructions (PDF)

  • Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    x
                

    This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto 9-1/4" rotors and calipers onto your machined Chevy 1949-54 car spindles.

    Kit features:

    • 9-1/4" brake rotor, 5 x 4-3/4" wheel bolt pattern
    • Remanufactured Pinto/Mustang iron calipers, 7/16"-24 inlet
    • 16" rubber brake lines
    • Zinc plated dust caps
    • All necessary brackets, adapters, bearings, seals, hardware and instructions included

    Note:

    • Will not work with traditional style steering (no room for upper steering arm).
    • Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends.
    • For use only on street rod tube or I-beam front axles when using 1949-54 Chevy style spindles intended for Model T and Model A to 1936 Ford front ends.

    910-31948 Instructions (PDF)

  • Mustang II Disc Brake Kit for Early Chevy Spindles, 5 on 4-1/2 Inch
    Mustang II Disc Brake Kit for Early Chevy Spindles, 5 on 4-1/2 Inch
    x
                

    This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto rotors and calipers onto your machined Chevy 1949-54 car spindles. Disc brake kit is desigend for use only on street rod tube front axles when using 1949-54 Chevy style spindles intended for Model T and Model A to 1936 Ford front ends. This kit includes two 9-1/4" rotors with a Ford bolt pattern.

    • 9-1/4" brake rotor, 5 x 4-1/2" wheel bolt pattern
    • Pinto/Mustang iron calipers, 7/16"-24 inlet
    • 16" rubber brake lines
    • Zinc plated dust caps
    • All necessary brackets, adapters, bearings, seals, and hardware
    • Instructions included

    Note: Will not work with traditional style steering (no room for upper steering arm). Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends.

    910-31947 Instructions (PDF)

  • Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    x
                Easily upgrade your Mustang II based suspension from the stock 9-1/4" rotors to 11" rotors with powerful single piston GM midsize floating calipers. Kit requires no machining. For use on 1974-1980 Pinto, Bobcat and Mustang II factory spindles.  

    GM bolt pattern 5 on 4-3/4" (increases track width 1" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31943 Instructions (PDF)

  • Heidts Universal 56-1/2 Econo Crossmember
    Heidts Universal 56-1/2 Econo Crossmember
    x
                Please view the product's page for more information
            
  • Currie 1967-70 Mustang 9 Inch Replacement Rear Axle
    Currie 1967-70 Mustang 9 Inch Replacement Rear Axle
    x
                Please view the product's page for more information
            
  • 1967-1969 Mustang Disc Brake Kit
    1967-1969 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1967-1969 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Works on 6-cylinder or V8 drum brake spindles
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes
    • Fits inside 14" x 7" or larger wheels

    Kit Includes:

    • 43mm 4-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • 1964-1966 Mustang Disc Brake Kit
    1964-1966 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your vintage Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1964-1966 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Only works on V8 drum brake spindles. 
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes.
    • Fits inside 14" x 7" or larger wheels

    Kit includes:

    • 43mm Four-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • Track-T Front Disc Brake Kit
    $239.99
    Product Rating: 5.00 Stars
    Track-T Front Disc Brake Kit
    x
                

    This brake kit includes Mustang II/Pinto brake components to fit the Track-T 1949-54 Chevy spindles. Kit features 9-1/4" rotors, rebuilt single piston calipers, pads, stainless braided AN 4 brake lines, fittings, & hardware.

    NOTE: Please specify desired wheel bolt pattern (5 x 4.5" or 5 x 4.75") in the Comments box on the Order Summary/Payment Info page (page 2) when checking out. 

  • Currie 1964-66 Mustang 9 Inch Replacement Rear Axle
    Currie 1964-66 Mustang 9 Inch Replacement Rear Axle
    x
                Please view the product's page for more information