Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"speedway brake kit gm midsize" Page 1 of 2

  • Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    Kit installs 11" diameter GM mid-size disc brakes on your machined 1949-54 Chevy car spindles, 1941-59 Chevy pickup spindles, or Speedway '49-'54 Chevy-style spindles. Stock spindles will require minor machine work.

    NOTE: This kit will not work with stock '49-'54 Chevy steering arms installed on stock '49-'54 Chevy car front ends. Kit is designed for street rod dropped tube front axles using 1949-54 Chevy-style spindles and flat plate steering arms. Kit will not work with "straight" tube axles as the caliper will contact the axle tube before sufficient turning radius is completed.

    910-31953 Instructions (PDF)

  • Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    Kit installs 11" diameter GM mid-size disc brakes on your machined 1949-54 Chevy car spindles, 1941-59 Chevy pickup spindles, or Speedway '49-'54 Chevy-style spindles. Stock spindles will require minor machine work.

    NOTE: This kit will not work with stock '49-'54 Chevy steering arms installed on stock '49-'54 Chevy car front ends. Kit is designed for street rod dropped tube front axles using 1949-54 Chevy-style spindles and flat plate steering arms. Kit will not work with "straight" tube axles as the caliper will contact the axle tube before sufficient turning radius is completed.

    910-31954 Instructions (PDF)

  • 1958-1964 Chevy Disc Brake Kit for Drop Spindles
    1958-1964 Chevy Disc Brake Kit for Drop Spindles
    x
                

    Speedway offers this complete disc brake kit for 1958-64 Chevy cars with our 2" drop spindles (910-34910 at right). The brake kit uses common midsize calipers and 12" rotors with a 5 on 4-3/4" bolt pattern. Brake kit will not fit stock spindles. Calipers have 7/16"-20 inlets.

    Kit includes:

    • Street brake pads
    • 12" brake rotors
    • GM '69-'77 mid-size single piston iron calipers
    • Caliper slide bolts
    • Rubber brake Lines
    • Bearings & Seals
    • Spindle nut kit 

    Note: Increases track width .100" per side for a total track width increase of .200" hub to hub when compared to the OEM drum brake track width.

  • GM Midsize Brake Kit for 910-34923 Spindles
    GM Midsize Brake Kit for 910-34923 Spindles
    x
                

    Disc brake kit features 10 ½” GM vented cast iron rotors and 1969-77 GM single piston calipers. Track width is increased over stock O/E front end width by 3/4" overall or 3/8" per side.

    Spindles sold separately.

    910-31995 Instructions (PDF)

  • 1978-88 Replacement GM Midsize Metric Calipers
    1978-88 Replacement GM Midsize Metric Calipers
    x
                

    These stock replacement single piston metric calipers were standard equipment on 1978-88 GM midsize cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to midsize 1969-1977 caliper.

    • No core charge required
    • 10mm x 1.50 inlet 
    • Speedway 156 pads and slider bolts included

     

  • 1978-Up GM Metric Brake Calipers, IMCA Approved
    1978-Up GM Metric Brake Calipers, IMCA Approved
    x
                

    These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

     

    • IMCA approved
    • No core charge required
    • 7/16"-20 inlet
    • Can be used with brake hoses from Pre-1978 GM intermediate cars
    • Brake pads & bolts sold separately

     

    Note: Does NOT include brake pads or slider bolts and bushings.

  • 1963-70 Chevy Pickup Front Disc Brake Bracket Kit
    1963-70 Chevy Pickup Front Disc Brake Bracket Kit
    x
                

    This kit allows you to upgrade your 1963-70 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you wanted custom 5-lug wheels on your truck anyways, right?

    The kit will make use of 1969-72 Chevelle rotors & 1969-77 Camaro calipers.

    Use Speedway Outer Wheel Bearing #912TLM11949 (not included).

  • Speedway Basic Brake Kit for 1955-57 Chevy Car
    Speedway Basic Brake Kit for 1955-57 Chevy Car
    x
                Just what's needed to update your classic Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once. This kit will increase the total track width by 1-3/4". May not clear some 14" wheels. Uses 1969-72 GM Midsize calipers and rotors. Bolts on with no machine work necessary.  

    Kit Includes:

    • Brake caliper brackets
    • Hardware
    916-31915 Instructions (PDF)
  • Basic Disc Brake Kit, 1969-77 GM Caliper to Ford Spindle, 5 on 4-3/4
    Basic Disc Brake Kit, 1969-77 GM Caliper to Ford Spindle, 5 on 4-3/4
    x
                This basic front disc brake conversion kit allows you to mount 1969-72 GM mid-size rotors (5 on 4-3/4" wheel bolt pattern) and 1969-77 GM mid-size calipers on your 1937-48 Ford passenger car style spindles. No machine work needed. Bracket is zinc plated.   

    Kit Includes:

    • 1969-1972 GM to Ford brake brackets
    • Hardware
    • Bearing and seal adapters
    • Seals
    • Inner bearing cups
    • Inner bearing cones
    • Spacers
    • Instructions
    • Does not include dust caps, washers or spindle nuts

    916-31903 Instructions (PDF)

  • Basic Disc Brake Kit, GM Mid-size to Early Chevy Spindle
    Basic Disc Brake Kit, GM Mid-size to Early Chevy Spindle
    x
                

    Install 11" diameter GM mid-size disc brakes on your 1949-54 Chevy car spindles or 1941-59 Chevy pickup spindles with this basic bracket kit.

    Kit includes:

    • Brake brackets
    • Bearing & seal adapters
    • Hardware

    This kit will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends. To be used only on street rod tube front axles when using 1949-54 Chevy spindles commonly used on Model T and Model A to 1936 Ford front ends.

    916-31916 Instructions (PDF)

  • Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily installs 11" rotors and the 1969-77 GM midsize calipers to your 1937-48 Ford passenger car spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Chevy bolt pattern 5 on 4-3/4".

    910-31942 Instructions (PDF)

  • Brake Kit 1969-77 GM Caliper to Early Ford Spindle, Ford B-P
    Brake Kit 1969-77 GM Caliper to Early Ford Spindle, Ford B-P
    x
                

    Easily installs 11" Ford/Mopar rotors and 1969-1977 midsize GM single piston calipers to your 1937-1948 Ford passenger car spindles. No machine work needed. Great for street rods based on 1932-1948 Fords, however, these kits are much too large and heavy for a T-bucket or an early roadster.

    Not for use with bolt-on steering arms.

    Note: Some applications may require you to purchase item (617-8562) with this kit.

    910-31940 Instructions (PDF)

  • Speedway Soft Street Organic Brake Pads GM Mid-Size 1969-1977
    Speedway Soft Street Organic Brake Pads GM Mid-Size 1969-1977
    x
                

    Speedway Motors is your one-stop shop for GM 1969-77 Midsize caliper brake pads.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4. One set will outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • 1955-57 Chevy Dropped Spindle Kit for GM Midsize Calipers
    1955-57 Chevy Dropped Spindle Kit for GM Midsize Calipers
    x
                

    Dropped spindles will not only enhance the rake of your Tri-Five Chevy, they will also improve handling due to the lower roll center. These spindles are designed like the original only they have 2” of drop built in. Plus, dropped spindles maintain factory steering & suspension geometry so original steering arms can be used.

    The optional disc brake kit features 10 ½” GM vented cast iron rotors and 1969-77 GM single piston calipers. Brake kit sold separately.

    • 2" drop
    • Completes both sides
    • Maintains factory steering & suspension geometry
    • Includes midsize caliper bracket & bolts

    Note: These spindles cannot be used with stock drums or brake conversions for stock spindles.

    910-34923 Instructions (PDF)

  • Basic Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Basic Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    This basic front disc brake conversion kit allows you to bolt on modern disc brakes to your '37-'48 Ford passenger car style spindles. Kit comes with the caliper bracket, inner bearing and seal, and required hardware. Outer bearing 912-TLM11949 is not supplied with this kit.

    Not for use with bolt-on steering arms.

    Kit works with '76-'80 Dodge Aspen 11" rotors (5 on 4-1/2" wheel bolt pattern) and '69-'77 GM mid-size calipers.

    916-31921 Instructions (PDF)

  • Speedway 1969-77 GM Midsize Caliper
    Speedway 1969-77 GM Midsize Caliper
    x
                Rebuilt 1969-77 mid and full size caliper. 7/16"-20 inlet so you can use the readily available brake hoses and hardware from Pre-1978 GM midsize cars. IMCA approved. 

    No core charge required. Fits 1" thick rotor. 2.8" diameter pistons installed. It has 7-1/16" center to center mounting holes. The width between mounting tabs is 2-3/4".
  • GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    x
                

    Disc brake kit features 10-½” GM vented cast iron rotors and 1978-88 GM metric single piston calipers.

    • 10-1/2" rotors (O.E. on 1979-81 GM Midsize: Malibu, Monte Carlo, Cutlass, Regal, etc.) 
    • 5 x 4-3/4" bolt pattern
    • Rubber Brake Lines
    • 1978-88 GM Metric Calipers
    • 7/16"-20 inlet fitting
    • Includes all hardware: pads, slide bolts, seals, inner & outer wheel bearings, spindle nuts, dust caps

    Spindles sold separately.

    910-31992 Instructions (PDF)

  • Basic Disc Brake Kit, 1969-77 GM Caliper, Stock Ford Spindle, 5on4-3/4
    Basic Disc Brake Kit, 1969-77 GM Caliper, Stock Ford Spindle, 5on4-3/4
    x
                

    This basic front disc brake conversion kit allows you to easily install '73-'77 GM mid-size 11" rotors (5 on 4-3/4") and '69-'77 mid-size GM single piston calipers onto your '37-'48 Ford passenger car style spindles. No machine work needed.

    Kit includes:

    • 1973-77 GM brake brackets
    • 1973-77 hardware
    • Bearing and seal adapters
    • Seals
    • Inner bearing cups
    • Inner bearing cones
    • Spacers
    • Instructions
    • Does not include dust caps, washers or spindle nuts
    Note: Not for use with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. However these kits are much too large and heavy for a T-bucket or early roadster.

    916-31901 Instructions (PDf)

  • Big Bore GM Metric 1978-88 Brake Caliper
    Big Bore GM Metric 1978-88 Brake Caliper
    x
                

    If you are using 1978-88 GM Metric style brake calipers your choices of piston sizes are pretty much limited to 2-1/2". This isn't bad unless you want to 'tune' your braking by using different size calipers front to rear. By using a larger 2-3/4" piston you will increase the braking force at a wheel over a wheel using a smaller piston.

    Bleeder and inlet are both 10mm-1.5 inlet allowing the caliper to be used on either side. Plus, these calipers have been ground smooth to make them easier to paint.

    Includes pads and hardware. Sold as EACH.

    • 20% increase in stopping power over stock calipers
    • Can used on the left and right sides
    • Extra ribs have been added internally while unnecessary weight was removed
    • Lighter, stronger, has more stopping power than OEM calipers
    • Each caliper includes:
      • brake pads
      • clips
      • slide pins
      • banjo bolt
      • washers
      • bleeder screw
  • Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    x
                GM bolt pattern 5 on 4-3/4"

    Easily installs 11" rotors and 1969-77 mid-size GM single piston calipers to your 1937-48 Ford passenger car spindles. No machine work needed.

    Kit Includes:
  • New 11" brake rotor, 5 x 4-3/4"
  • Semi-metallic brake pads
  • GM Caliper slide bolts
  • Rebuilt 1969-77 calipers (7/16"-20 inlets)
  • 1973-77 GM brake brackets
  • 1973-77 hardware
  • New bearing and seal adapters
  • Seals
  • Inner bearing cups
  • Rubber Brake Lines
  • Inner bearing cones
  • Spacers
  • Outer bearing cones
  • Seals
  • Bolt kit for flat steering arm
  • Dust caps
  • Instructions
  • Not for use with bolt-on steering arms.  The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However these kits are much too large and heavy for a T-bucket or earlier roadster.

    910-31941 Instructions (pdf)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (1.96" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31910 Instructions (PDF)

  • 1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1967-1970 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passenger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 11" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

    Rotor Diameter:  11"
    Caliper Piston Diameter:  2.8"
    Caliper Inlet:  7/16"-20
    Booster Type:  Single Diaphragm (Stock Type) 
    Booster Diameter:  11"
    Proportioning Valve Type:  Disc Front/Drum Rear
    Proportioning Valve Ports:  3/8"-24 Front, 9/16"-18 Rear
    Recommended Brake Line:  3/16" Steel 

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31920 Instructions (PDF)

  • 1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1963-1966 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 9" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

  • Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    x
                Easily upgrade your Mustang II based suspension from the stock 9-1/4" rotors to 11" rotors with powerful single piston GM midsize floating calipers. Kit requires no machining. For use on 1974-1980 Pinto, Bobcat and Mustang II factory spindles.  

    GM bolt pattern 5 on 4-3/4" (increases track width 1" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31943 Instructions (PDF)

  • Disc Brake Kit for Total Performance Spindles, 5 x 4-3/4
    Disc Brake Kit for Total Performance Spindles, 5 x 4-3/4
    x
                

    Easily installs 11" rotors and '69-'77 midsize GM single piston calipers to your classic Total Performance spindles. Kit comes complete with new rotors and semi-metallic pads, new bearings and seals, new caliper bolts and rebuilt calipers, along with caliper mounting brackets, bushings, hardware and instructions.

    Has a 5 on 4-3/4" GM style wheel bolt pattern with 7/16" Fine studs. 

     

    Spindle Guide (Link)

  • Bearing & Seal Kit for Brake Kit 910-31954
    Bearing & Seal Kit for Brake Kit 910-31954
    x
                Bearing & seal kit for GM Midsize 11" brakes/1949-54 Chevy car or 1941-59 Chevy pickup spindle brake kit.   

    Kit Includes:

    • Seals
    • Tapered inner bearing
    • Tapered outer bearing cones
    • Tapered outer bearing cups
  • 1964-1974 GM Disc Brake Booster Conversion Kit Combo
    1964-1974 GM Disc Brake Booster Conversion Kit Combo
    x
                

    When you put modern disc brakes on the front of your 1964-1974 GM midsize car, you should update the master cylinder as well. Why not go to this simple bolt on power brake system? The 1" bore Corvette-style master cylinder features two different outlet sizes to fit all GM applications. 

    • 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlet
    • Disc brake conversion kit
    • 9" Slimline Single Diaphragm
    • Fits: 1964-1974 GM midsize car
    • Includes:
      • booster
      • master cylinder
      • proportioning valve
      • bracket
      • pedal rod extension and clevis

    *Please refer to "Application" tab for corresponding vehicle fit.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    • Medium friction, smooth engagement, low abrasion on iron rotors.
    • Flat torque curve.
    • Low to medium wear rate, increases as temperature increases.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 15E-6103K Poly-E GM Metric 1978-Up Brake Pads
    Wilwood 15E-6103K Poly-E GM Metric 1978-Up Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 150-9422K BP-20 GM Metric 1978-Up Brake Pads
    Wilwood 150-9422K BP-20 GM Metric 1978-Up Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • 1964-72 GM A-Body 2 Inch Dropped Spindles
    1964-72 GM A-Body 2 Inch Dropped Spindles
    x
                

    Speedway now offers 2" dropped spindles for 1964-1972 Chevelle, Lemans, Cutlass, Skylark A-Bodies.

    This is an aftermarket component that will require the brake kit # 910-31957. This spindle makes use of the 1978-up "metric" GM spindle and the 1979-1981 GM "midsize" 10-1/2" rotor which are both provided in the disc brake conversion kit # 910-31957. This disc brake kit # 910-31957 will not work with o/e spindles.

  • Garage Sale - Speedway Soft Street Organic Brake Pads GM Mid-Size 1969-1977
    Garage Sale
    Garage Sale - Speedway Soft Street Organic Brake Pads GM Mid-Size 1969-1977
    x
                

    These brake pads are garage sale priced because they have been test fit and returned.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

    Speedway Motors is your one-stop shop for GM 1969-77 Midsize caliper brake pads.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4. One set will outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Garage Sale - Speedway Basic Brake Kit for 1955-57 Chevy Car
    Garage Sale
    Garage Sale - Speedway Basic Brake Kit for 1955-57 Chevy Car
    x
                Please view the product's page for more information
            
  • 1955-57 Chevy Bearing & Seal Kit for 1969-72 Rotors
    1955-57 Chevy Bearing & Seal Kit for 1969-72 Rotors
    x
                

    Wheel bearing and seal kit for mounting '69-'72 GM Midsize 11" rotors to original Tri Five Chevy spindles. Use with your rotors, calipers, and brackets. Kit includes inner and outer front wheel bearings, races and seals.

    Note: Won't work with stock '55-'57 drum brakes.

  • Disc Brake Kit for Total Performance Spindles, 5 x 4-1/2
    Disc Brake Kit for Total Performance Spindles, 5 x 4-1/2
    x
                

    Easily installs 11" vented rotors and '69-'77 midsize GM single piston calipers to your classic Total Performance T-bucket spindles. Kit comes complete with new rotors and semi-metallic pads, new bearings and seals, new caliper bolts and rebuilt calipers, along with caliper mounting brackets, bushings, hardware and instructions.

    Has a 5 on 4-1/2" Ford/Mopar style wheel bolt pattern with 1/2" Fine studs.

     

    Spindle Guide (Link)

Goto Previous PagePrevious Page
1 2