Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"spark plug wire terminals" Page 1 of 5

  • Red Spark Plug Wire Terminal & Boot Kit
    Red Spark Plug Wire Terminal & Boot Kit
    x
                

    Designed for use with our 7mm Red Spark Plug Wires (shown below).

    This Terminal and Boot Kit contains:

    • Eight 90° Spark Plug HEI style boots
    • Eight 90° Spark Plug HEI style terminals
    • One 90° Boot & Terminal for coil end of coil wire
    • Nine 90° Spark Boots for "socket style" cap
    • Eight 90° Terminals for "socket style" cap
    • Nine Straight Boots for "socket style" cap
    • Eight Straight Terminals for "socket style" cap

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Moroso 73220 Spiral Core Spark Plug Wires Set, 135 Degree Boot, Blue Max
    Moroso 73220 Spiral Core Spark Plug Wires Set, 135 Degree Boot, Blue Max
    x
                

    The superiority of Moroso Blue Max 8mm, 800 ohm spiral core wire comes from over 27 years of continual refinement. The combination of Moroso engineering expertise and a rigorous testing program makes this the finest ignition wire available for street or race. These spark plug wire sets are terminated at the plug end only and include enough wire length and terminals to fit HEI or Non-HEI distributors. You install the distributor ends. Wire color is blue.

    • Optimized combination of capacitance, inductance and resistance
    • Provides more spark energy and EMI protection than any other spiral core wire available
    • Eliminates interference with on-board electronics and provides static-free sound quality for car audio systems
    • Universal plug wire set fits HEI or socket style caps
    • Spark plug terminals and boots factory installed
    • You install distributor ends

    Spark Plug Wire Installation Instructions (PDF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Moroso OE64011 Flathead Universal Spark Plug Wires Kit
    Moroso OE64011 Flathead Universal Spark Plug Wires Kit
    x
                

    Finally, a set of 7mm supression spark plug cables as a universal plug wire kit for your Flathead.

    We started with black, 7mm suppressive core wire that will go through your looms. The 90° black plug boots are installed but you have to install the straight or 90° distributor ends. We even put in enough wire to place your coil on the firewall. Comes with straight boots for the distributor end of the plug wire. Black only.

    Two sets of boots/terminals are included, one set for conventional socket-type caps and one set for HEI type caps. The set includes 9 cables, the longest being 51" and the shortest being 24". Use eight for the plugs, one for the coil.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Red 7mm Solid Core Spark Plug Wire, 33 Ft.
    Red 7mm Solid Core Spark Plug Wire, 33 Ft.
    x
                

    Transparent red insulation on the cable allows you to actually see the woven wire core inside. Just trim to length and crimp on terminals. It readily accepts all normal boots and terminals available at local part stores, or use with Rajah ends.

    • Wire Diameter:  7mm
    • Wire Type:  Solid Core (Non-EMI Suppression)

    Not for use with multi-spark ignition boxes, such as MSD 6A or 6AL.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Rajah 7mm Spark Plug Wire Ends, 90
    Rajah 7mm Spark Plug Wire Ends, 90
    x
                

    Your Flattie or Nostalgia engine won't look right if you don't have original Rajah spark plug wire ends. Work great with our red plug wires. 90° ends. Bag of eight.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Wire Stripper and Crimper
    $4.99
    Product Rating: 4.33 Stars
    Wire Stripper and Crimper
    x
                

    Allows you to cut, strip and crimp 22 - 10 gauge wire and terminals and 7 - 8.5mm spark plug wires and terminals.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70051 8mm Spark Plug Wires, 90 Deg, Resistor Core, Black
    Taylor Cable 70051 8mm Spark Plug Wires, 90 Deg, Resistor Core, Black
    x
                The ultimate in spark plug wires for racing and serious street machines. Universal fit set will require cutting to fit, terminating, and booting the distributor end.  
    • High grade silicone over silicone resists temperatures up to 600° F
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double locking spark plug terminals provide a firm grip
    • Resistor core for street applications
    • Universal fit for HEI and socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • MSD 5554 Street-Fire Spark Plug Wires Set, Small Block Chevy 350 HEI
    MSD 5554 Street-Fire Spark Plug Wires Set, Small Block Chevy 350 HEI
    x
                

    Street Fire low resistance spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery. Street Fire spark plug wires have the quality you've come to expect from MSD Ignition at a price that's comparable to other brands. They feature spiral-wound, low-resistance conductors and high EMI suppression capabilities, with 90 degree boots.

    • Long enough to go over valve covers
    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps
    These wires are for S/B Chevys with an HEI cap and are designed to be routed over the valve covers.
  • American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore. These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included. It's a painless process. For 12 Volt upgrades.

  • Red 7mm Solid Core Spark Plug Wires Kit With 90 Degree Rajah Ends
    Red 7mm Solid Core Spark Plug Wires Kit With 90 Degree Rajah Ends
    x
                

    This kit includes twenty feet of our 7mm red solid core plug wire, eight 90 degree Rajah spark plug terminals and ten distributor/coil terminals with black boots. Just trim to length and crimp on terminals.

    • Wire Diameter:  7mm
    • Wire Type:  Solid Core (Non-EMI Suppression)

    Not for use with multi-spark ignition boxes, such as MSD 6A or 6AL.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

     

  • Taylor Cable 70251 8mm Spark Plug Wires, 90 Degree, Red, Resistor Core
    Taylor Cable 70251 8mm Spark Plug Wires, 90 Degree, Red, Resistor Core
    x
                The ultimate in spark plug wires for racing and serious street machines. Universal fit set will require cutting to fit, terminating, and booting the distributor end.   
    • High grade silicone over silicone resists temperatures up to 600° F
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double locking spark plug terminals provide a firm grip
    • Resistor core for street applications
    • Universal fit for HEI and socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Moroso 73226 8mm Spark Plug Wires, Straight Boot, Spiral Core, Blue Max
    Moroso 73226 8mm Spark Plug Wires, Straight Boot, Spiral Core, Blue Max
    x
                

    The superiority of Moroso Blue Max 8 mm, 800 ohm Spiral Core Wire comes from over 27 years of continual refinement. The combination of Moroso engineering expertise and a rigorous testing program makes this the finest ignition wire available for street or race. 

    These sets are terminated at the plug end only and include enough wire length and terminals to fit HEI or Non-HEI distributors. You install the distributor ends. Wire color is blue.

    • Universal plug wire set
    • Optimized combination of capacitance, inductance and resistance provides more spark energy and EMI protection than any other spiral core wire available
    • Eliminates interference with on-board electronics and provides static-free sound quality for car audio systems
    • Spark plug terminals and boots factory installed
    • You install distributor ends
    • Fits HEI or Socket style caps

    Spark Plug Wire Installation Instructions (PDF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Red 7mm Solid Core Spark Plug Wire, 100 Ft.
    Red 7mm Solid Core Spark Plug Wire, 100 Ft.
    x
                

    Transparent red insulation on the cable allows you to actually see the woven wire core inside. Just trim to length and crimp on terminals. It readily accepts all normal boots and terminals available at local part stores, or use with Rajah ends.

    • Wire Diameter:  7mm
    • Wire Type:  Solid Core (Non-EMI Suppression)

    Not for use with multi-spark ignition boxes, such as MSD 6A or 6AL.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • 7mm Spark Plug Wires, Solid Core, Red, Straight Rajah Ends
    7mm Spark Plug Wires, Solid Core, Red, Straight Rajah Ends
    x
                

    This kit includes twenty feet of our 7mm red solid core plug wire, eight straight Rajah spark plug terminals and ten distributor/coil terminals with black boots. Just trim to length and crimp on terminals.

    • Wire Diameter:  7mm
    • Wire Type:  Solid Core (Non-EMI Suppression)

    Not for use with multi-spark ignition boxes, such as MSD 6A or 6AL.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

     

  • MSD 31689 8.5mm Midget Spark Plug Wires Set, Universal
    MSD 31689 8.5mm Midget Spark Plug Wires Set, Universal
    x
                

    MSD offers a universal set of 8.5mm Super Conductor plug wires for the Midget racers. These 50 ohms per foot resistance wires are supplied with the coil side’s special locking terminal and boot crimped to the wires. The spark plug side boots and terminals are supplied loose so the wires can be routed and crimped for each application. A special mini-stripper-crimper tool is also supplied.

    Note: These low resistance spark plug wires are only applicable to an MSD Midget Coil Pack #8240 ignition system.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 76240 8mm Spark Plug Wires-Solid Core-Under Headers-90  -Red
    Taylor Cable 76240 8mm Spark Plug Wires-Solid Core-Under Headers-90 -Red
    x
                

    Taylor Cable’s 8mm Spiro-Pro Series outperforms the competition in both looks and performance at a price you can afford. Spiro-Pro is simply a top of the line high performance 8mm ignition wire and is an excellent choice for race only applications with it's solid wire core.

    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Use with magnetos and point style ignition systems (non electronic)
    • Fully assembled
    • Coil wire is 35" long and requires final assembly
  • Moroso 73225 Spark Plug Wires, 90 Degree, Spiral Core, Blue Max
    Moroso 73225 Spark Plug Wires, 90 Degree, Spiral Core, Blue Max
    x
                

    The superiority of Moroso Blue Max 8 mm, 800 ohm Spiral Core Wire comes from over 27 years of continual refinement. The combination of Moroso engineering expertise and a rigorous testing program makes this the finest ignition wire available for street or race. These sets are terminated at the plug end only and include enough wire length and terminals to fit HEI or Non-HEI distributors. You install the distributor ends. Wire color is blue.

    • Universal plug wire set
    • Optimized combination of capacitance, inductance and resistance provides spark energy and EMI protection
    • Eliminates interference with on-board electronics and provides static-free sound quality for car audio systems
    • Spark plug terminals and boots factory installed
    • You install distributor ends
    • Fits HEI or Socket style caps

    Spark Plug Wire Installation Instructions (PDF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Moroso 72820 8mm Spark Plug Wires, Solid Core, 90 Degree Boot, Blue Max
    Moroso 72820 8mm Spark Plug Wires, Solid Core, 90 Degree Boot, Blue Max
    x
                

    The combination of Moroso engineering expertise and a rigorous testing program makes this the finest ignition wire available for your racecar. 

    These sets are terminated at the plug end only and include enough wire length and terminals to fit HEI or Non-HEI distributors. You install the distributor ends. Wire color is blue.

    •  Universal plug wire set fit socket or HEI caps
    • These 8 mm wires incorporate the latest technology in temperature and conductivity
    • Solid core wires recommended for magneto use
    • Spark plug terminals and boots factory installed
    • You install distributor ends

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Moroso 72800 Solid Core Spark Plug Wires, Straight Boot, Blue Max
    Moroso 72800 Solid Core Spark Plug Wires, Straight Boot, Blue Max
    x
                Blue Max solid core spark plug wires combine state-of-the-art engineering with the finest workmanship and quality control available! These solid core sets are pre-terminated at the spark plug end and include enough wire, boots and terminals so you can complete the distributor/magneto end. Wire color is blue. Not for use with MSD components. 
    • 8mm super-high-performance wire for racing only
    • Engineered for magneto and other ignitions that do not require electro-magnetic interference (EMI) suppression
    • Combination silver-plated copper and stainless steel "solid core" provides maximum conductivity and strength
    • Each wire individually tested for continuity after termination to ensure race-ready performance
    • Universal set fits both HEI and socket style caps
    • Spark plug terminals and boots factory installed
    • You install distributor ends

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • MSD 31199 8.5mm Spark Plug Wires, Universal 8 Cylinder, Super Conductor
    MSD 31199 8.5mm Spark Plug Wires, Universal 8 Cylinder, Super Conductor
    x
                

    The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! Plus, the proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.

    This universal 8 cylinder plug wire kit does require assembly, although the spark plug end is already installed. Comes with multi-angle (bendable) plug terminals and boots, including both HEI and socket style distributor ends. Combination stripping and crimping tool also included. Wires are red, boots are gray. 

    • Only 40-50 ohms of resistance per ft.
    • Lowest resistance of any helically wound wire
    • Unique materials and design provides extremely effective Electro Magnetic Interference (EMI) "choke"
    • Keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Red 7mm Solid Core Spark Plug Wire, 20 Ft.
    Red 7mm Solid Core Spark Plug Wire, 20 Ft.
    x
                

    Transparent red insulation on the cable allows you to actually see the woven wire core inside. Just trim to length and crimp on terminals. It readily accepts all normal boots and terminals available at local part stores, or use with Rajah ends.

    • Wire Diameter:  7mm
    • Wire Type:  Solid Core (Non-EMI Suppression)

    Not for use with multi-spark ignition boxes, such as MSD 6A or 6AL.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Rajah 7mm Spark Plug Wire Ends, Straight
    Rajah 7mm Spark Plug Wire Ends, Straight
    x
                

    Your Flattie or Nostalgia engine won't look right if you don't have original Rajah spark plug wire ends. Work great with our red plug wires. Straight ends. Bag of eight.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • MSD 5551 Street-Fire Spark Plug Wire Set, V8 Multi-Angle, Stock/HEI Universal
    New
    MSD 5551 Street-Fire Spark Plug Wire Set, V8 Multi-Angle, Stock/HEI Universal
    x
                Street Fire Spark Plug Wires feature a low resistance conductor  that’s wrapped in a sleek and durable black sleeve. The terminals are  covered in black boots that protect the conductor from engine heat to  ensure spark delivery.
    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 Ohms per foot resistance for improved spark delivery and power
    • Straight silicone boots protect against high exhaust temps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • MSD 35599 8.5mm Spark Plug Wires Set, S/B Chevy HEI, Under Headers
    MSD 35599 8.5mm Spark Plug Wires Set, S/B Chevy HEI, Under Headers
    x
                

    What makes or breaks a plug wire is not only how well the wire is insulated, but how low of resistance the center core has. These assembled wire sets test 40-50 ohms per foot, while most others test 1500 ohms per foot.

    These low resistance spark plug wires are designed for Small Block Chevys with HEI and are routed under the headers. 

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 8023 8.8 Spiral Core Spark Plug Wires, HEI, Straight Boot
    Accel 8023 8.8 Spiral Core Spark Plug Wires, HEI, Straight Boot
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 9000C Ceramic Spark Plug Wires, Straight, Extreme 9000, Universal
    Accel 9000C Ceramic Spark Plug Wires, Straight, Extreme 9000, Universal
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI suppression core
    • 500 Ohms/ft resistance
    • Straight ceramic boots will withstand 2000° F
    • Stainless terminals
    • Includes ends for HEI (male) and socket (female) distributors

    Ceramic Wire Core Cut-A-Way (Link)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 9001C Extreme 9000 Universal Pro Fit Ceramic Spark Plug Wires Set
    Accel 9001C Extreme 9000 Universal Pro Fit Ceramic Spark Plug Wires Set
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI suppression core
    • 500 Ohms/ft resistance
    • 90 degree ceramic boots will withstand 2000° F
    • Stainless terminals
    • Includes ends for HEI (male) and socket (female) distributors

    Ceramic Wire Core Cut-A-Way (Link)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 9002C Ceramic Spark Plug Wires Set, 115 Boot, Xtreme 9000, Universal
    Accel 9002C Ceramic Spark Plug Wires Set, 115 Boot, Xtreme 9000, Universal
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals
    • Includes ends for HEI (male) and socket (female) distributors

    Ceramic Wire Core Cut-A-Way (Link)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 8020 8.8 Spiral Core Spark Plug Wires, Socket Cap, 90 Deg Boot
    Accel 8020 8.8 Spiral Core Spark Plug Wires, Socket Cap, 90 Deg Boot
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 8021 8.8 Spiral Core Spark Plug Wires, HEI, 90 Degree Boot
    Accel 8021 8.8 Spiral Core Spark Plug Wires, HEI, 90 Degree Boot
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • MSD 35051 Pro Crimp Tool
    $69.99
    MSD 35051 Pro Crimp Tool
    x
                

    If you make numbers of plug wires or do a lot of custom wiring, the Pro-Crimp Tool is a must for your toolbox. The Pro-Crimp features interchangeable jaws allowing for a variety of different style crimps with one heavy-duty tool. The Pro-Crimp features a hardened steel frame with comfortable molded hand grips. The slick ratchet action provides secure, factory quality crimps every time. The Tool is supplied with precision crimping/stripping jaws for MSD’s spark plug wire terminals. Recommended to be used with MSD 8.5mm Super Conductors!

    Pro Crimp Tool can also be used to crimp Weatherpak terminals with the Weatherpak Jaw Attachment 547-3509. 

    Learn how to properly use this tool to attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70650 8mm Spark Plug Wires, 90 Deg Boot, Wire Core, Blue
    Taylor Cable 70650 8mm Spark Plug Wires, 90 Deg Boot, Wire Core, Blue
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Universal fit for HEI and socket style caps 

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70250 8mm Spark Plug Wires, Wire Core, 90 Degree, Red
    Taylor Cable 70250 8mm Spark Plug Wires, Wire Core, 90 Degree, Red
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Universal fit for HEI and socket style caps 

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70054 8mm Spark Plug Wires, Straight, Wire Core, Black
    Taylor Cable 70054 8mm Spark Plug Wires, Straight, Wire Core, Black
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire Core for racing applications
    • Universal fit for HEI or Socket style caps

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70654 8mm Spark Plug Wires, Straight Boot, Wire Core, Blue
    Taylor Cable 70654 8mm Spark Plug Wires, Straight Boot, Wire Core, Blue
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire Core for racing applications
    • Universal fit for HEI or Socket style caps

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70050 8mm Spark Plug Wires, 90 Deg. Boot, Wire Core, Black
    Taylor Cable 70050 8mm Spark Plug Wires, 90 Deg. Boot, Wire Core, Black
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Universal fit for HEI and socket style caps 

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70254 8mm Spark Plug Wires, Straight Boot, Wire Core
    Taylor Cable 70254 8mm Spark Plug Wires, Straight Boot, Wire Core
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire Core for racing applications
    • Universal fit for HEI or Socket style caps

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70255 8mm Spark Plug Wires, Straight, Resistor Core, Red
    Taylor Cable 70255 8mm Spark Plug Wires, Straight, Resistor Core, Red
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for racing and serious street machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Resistor core for street applications
    • Universal fit for HEI or Socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70655 8mm Spark Plug Wires, Straight, Resistor Core, Blue
    Taylor Cable 70655 8mm Spark Plug Wires, Straight, Resistor Core, Blue
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for racing and serious street machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Resistor core for street applications
    • Universal fit for HEI or Socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70055 8mm Spark Plug Wires, Resistor Core, Straight, Black
    Taylor Cable 70055 8mm Spark Plug Wires, Resistor Core, Straight, Black
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for racing and serious street machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Resistor core for street applications
    • Universal fit for HEI or Socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

Goto Previous PagePrevious Page
1 2 3 4 5