Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"spark plug wire boot" Page 1 of 5

  • Red Spark Plug Wire Terminal & Boot Kit
    Red Spark Plug Wire Terminal & Boot Kit
    x
                

    Designed for use with our 7mm Red Spark Plug Wires (shown below).

    This Terminal and Boot Kit contains:

    • Eight 90° Spark Plug HEI style boots
    • Eight 90° Spark Plug HEI style terminals
    • One 90° Boot & Terminal for coil end of coil wire
    • Nine 90° Spark Boots for "socket style" cap
    • Eight 90° Terminals for "socket style" cap
    • Nine Straight Boots for "socket style" cap
    • Eight Straight Terminals for "socket style" cap

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Moroso OE64011 Flathead Universal Spark Plug Wires Kit
    Moroso OE64011 Flathead Universal Spark Plug Wires Kit
    x
                

    Finally, a set of 7mm supression spark plug cables as a universal plug wire kit for your Flathead.

    We started with black, 7mm suppressive core wire that will go through your looms. The 90° black plug boots are installed but you have to install the straight or 90° distributor ends. We even put in enough wire to place your coil on the firewall. Comes with straight boots for the distributor end of the plug wire. Black only.

    Two sets of boots/terminals are included, one set for conventional socket-type caps and one set for HEI type caps. The set includes 9 cables, the longest being 51" and the shortest being 24". Use eight for the plugs, one for the coil.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Moroso 73220 Spiral Core Spark Plug Wires Set, 135 Degree Boot, Blue Max
    Moroso 73220 Spiral Core Spark Plug Wires Set, 135 Degree Boot, Blue Max
    x
                

    The superiority of Moroso Blue Max 8mm, 800 ohm spiral core wire comes from over 27 years of continual refinement. The combination of Moroso engineering expertise and a rigorous testing program makes this the finest ignition wire available for street or race. These spark plug wire sets are terminated at the plug end only and include enough wire length and terminals to fit HEI or Non-HEI distributors. You install the distributor ends. Wire color is blue.

    • Optimized combination of capacitance, inductance and resistance
    • Provides more spark energy and EMI protection than any other spiral core wire available
    • Eliminates interference with on-board electronics and provides static-free sound quality for car audio systems
    • Universal plug wire set fits HEI or socket style caps
    • Spark plug terminals and boots factory installed
    • You install distributor ends

    Spark Plug Wire Installation Instructions (PDF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70051 8mm Spark Plug Wires, 90 Deg, Resistor Core, Black
    Taylor Cable 70051 8mm Spark Plug Wires, 90 Deg, Resistor Core, Black
    x
                The ultimate in spark plug wires for racing and serious street machines. Universal fit set will require cutting to fit, terminating, and booting the distributor end.  
    • High grade silicone over silicone resists temperatures up to 600° F
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double locking spark plug terminals provide a firm grip
    • Resistor core for street applications
    • Universal fit for HEI and socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • MSD 5554 Street-Fire Spark Plug Wires Set, Small Block Chevy 350 HEI
    MSD 5554 Street-Fire Spark Plug Wires Set, Small Block Chevy 350 HEI
    x
                

    Street Fire low resistance spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery. Street Fire spark plug wires have the quality you've come to expect from MSD Ignition at a price that's comparable to other brands. They feature spiral-wound, low-resistance conductors and high EMI suppression capabilities, with 90 degree boots.

    • Long enough to go over valve covers
    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps
    These wires are for S/B Chevys with an HEI cap and are designed to be routed over the valve covers.
  • Taylor Cable 70251 8mm Spark Plug Wires, 90 Degree, Red, Resistor Core
    Taylor Cable 70251 8mm Spark Plug Wires, 90 Degree, Red, Resistor Core
    x
                The ultimate in spark plug wires for racing and serious street machines. Universal fit set will require cutting to fit, terminating, and booting the distributor end.   
    • High grade silicone over silicone resists temperatures up to 600° F
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double locking spark plug terminals provide a firm grip
    • Resistor core for street applications
    • Universal fit for HEI and socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Rajah 7mm Spark Plug Wire Ends, 90
    Rajah 7mm Spark Plug Wire Ends, 90
    x
                

    Your Flattie or Nostalgia engine won't look right if you don't have original Rajah spark plug wire ends. Work great with our red plug wires. 90° ends. Bag of eight.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Speedway Spark Plug Boot Puller
    $7.99
    $10.00
    Speedway Spark Plug Boot Puller
    x
                It's hard to pull spark plug wires off the plug without ruining the wire.  This handy tool saves the wires and avoids burns.
            
  • Red 7mm Solid Core Spark Plug Wire, 33 Ft.
    Red 7mm Solid Core Spark Plug Wire, 33 Ft.
    x
                

    Transparent red insulation on the cable allows you to actually see the woven wire core inside. Just trim to length and crimp on terminals. It readily accepts all normal boots and terminals available at local part stores, or use with Rajah ends.

    • Wire Diameter:  7mm
    • Wire Type:  Solid Core (Non-EMI Suppression)

    Not for use with multi-spark ignition boxes, such as MSD 6A or 6AL.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 76240 8mm Spark Plug Wires-Solid Core-Under Headers-90  -Red
    Taylor Cable 76240 8mm Spark Plug Wires-Solid Core-Under Headers-90 -Red
    x
                

    Taylor Cable’s 8mm Spiro-Pro Series outperforms the competition in both looks and performance at a price you can afford. Spiro-Pro is simply a top of the line high performance 8mm ignition wire and is an excellent choice for race only applications with it's solid wire core.

    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Use with magnetos and point style ignition systems (non electronic)
    • Fully assembled
    • Coil wire is 35" long and requires final assembly
  • Accel 9024C Extreme 9000 1990-1995 GM 7.4L Ceramic Spark Plug Wire Set
    Accel 9024C Extreme 9000 1990-1995 GM 7.4L Ceramic Spark Plug Wire Set
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals

    Ceramic Wire Core Cut-A-Way (Link)

  • Accel 8020 8.8 Spiral Core Spark Plug Wires, Socket Cap, 90 Deg Boot
    Accel 8020 8.8 Spiral Core Spark Plug Wires, Socket Cap, 90 Deg Boot
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 8023 8.8 Spiral Core Spark Plug Wires, HEI, Straight Boot
    Accel 8023 8.8 Spiral Core Spark Plug Wires, HEI, Straight Boot
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 8021 8.8 Spiral Core Spark Plug Wires, HEI, 90 Degree Boot
    Accel 8021 8.8 Spiral Core Spark Plug Wires, HEI, 90 Degree Boot
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • DEi 010512 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 8 Pack
    DEi 010512 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 8 Pack
    x
                

    Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

    • Double-wall construction for added durability
    • Helps prevent burn-through, hardening and cracking of boots
    • Installs in seconds
    • Universal-fits most straight or angled boots
    • Withstands 1200°F direct continuous heat
    • Non-flammable & protects against chemicals & resists water

    Protect-A-Boot Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF)  

  • DEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 8 Pack
    DEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 8 Pack
    x
                

    Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

    • Double-wall construction for added durability
    • Helps prevent burn-through, hardening and cracking of boots
    • Installs in seconds
    • Universal-fits most straight or angled boots
    • Withstands 1200°F direct continuous heat
    • Non-flammable & protects against chemicals & resists water

    Protect-A-Boot Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF)  

     

  • DEi 010511 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 2 Pack
    DEi 010511 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 2 Pack
    x
                

    Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

    • Double-wall construction for added durability
    • Helps prevent burn-through, hardening and cracking of boots
    • Installs in seconds
    • Universal-fits most straight or angled boots
    • Withstands 1200°F direct continuous heat
    • Non-flammable & protects against chemicals & resists water

    Protect-A-Boot Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF)  

  • Accel 9002C Ceramic Spark Plug Wires Set, 115 Boot, Xtreme 9000, Universal
    Accel 9002C Ceramic Spark Plug Wires Set, 115 Boot, Xtreme 9000, Universal
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals
    • Includes ends for HEI (male) and socket (female) distributors

    Ceramic Wire Core Cut-A-Way (Link)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Wire Stripper and Crimper
    $4.99
    Product Rating: 4.33 Stars
    Wire Stripper and Crimper
    x
                

    Allows you to cut, strip and crimp 22 - 10 gauge wire and terminals and 7 - 8.5mm spark plug wires and terminals.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 9000C Ceramic Spark Plug Wires, Straight, Extreme 9000, Universal
    Accel 9000C Ceramic Spark Plug Wires, Straight, Extreme 9000, Universal
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI suppression core
    • 500 Ohms/ft resistance
    • Straight ceramic boots will withstand 2000° F
    • Stainless terminals
    • Includes ends for HEI (male) and socket (female) distributors

    Ceramic Wire Core Cut-A-Way (Link)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 9001C Extreme 9000 Universal Pro Fit Ceramic Spark Plug Wires Set
    Accel 9001C Extreme 9000 Universal Pro Fit Ceramic Spark Plug Wires Set
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI suppression core
    • 500 Ohms/ft resistance
    • 90 degree ceramic boots will withstand 2000° F
    • Stainless terminals
    • Includes ends for HEI (male) and socket (female) distributors

    Ceramic Wire Core Cut-A-Way (Link)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Moroso Spark Plug Wires, Over Valve Covers, HEI Cap Ends, Install-Ready
    Moroso Spark Plug Wires, Over Valve Covers, HEI Cap Ends, Install-Ready
    x
                

    If you have ever tried to put plug wires together yourself, you know how fustrating it can be. These pre-assembled Moroso 8mm spiral core wires are fiberglass reinforced with a silicone outer layer. Wires have 90° boots on both ends. Available in red or black for small block Chevy.

    • 90 Degree boots on both ends  
    • Over the valve cover wire route
    • HEI distributor cap ends
    • Designed for small block Chevy
    • Coil wire not included

    Note: HEI type sets do not include remote coil wire

  • Accel 8025 8.8 Universal Solid Core Spark Plug Wires Set, Straight Boot
    Accel 8025 8.8 Universal Solid Core Spark Plug Wires Set, Straight Boot
    x
                For high performance ignition wire, there is simply no alternative to Accel 8.8 spark plug wires. 
    • Silver plated copper is combined with a tough inner stainless steel core
    • Ultra strong fiberglass braiding provides unequalled tensile strength and resistance to "wire stretch"
    • Extra thick 8.8mm double-silicone insulation and unique silicone boots provide high dielectric strength and eliminates voltage leaks
    • Temperature Resistance-ACCEL 8.8 wire delivers peak performance even at temperatures over 500 degrees
    • Non RFI suppression
    • Works with HEI or Socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 8024 8.8mm Spark Plug Wires-90 Degree Boot-Solid Core-Universal
    Accel 8024 8.8mm Spark Plug Wires-90 Degree Boot-Solid Core-Universal
    x
                

    For high performance ignition wire, there is simply no alternative to Accel 8.8 spark plug wires.

    • Silver plated copper is combined with a tough inner stainless steel core
    • Ultra strong fiberglass braiding provides unequalled tensile strength and resistance to "wire stretch"
    • Extra thick 8.8mm double-silicone insulation and unique silicone boots provide high dielectric strength and eliminates voltage leaks
    • Delivers peak performance even at temperatures over 500 degrees
    • Non RFI suppression
    • Works with HEI and Socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 76238 8mm Spark Plug Wires, Over Valve, HEI, 90  , Solid Core, Red
    Taylor Cable 76238 8mm Spark Plug Wires, Over Valve, HEI, 90 , Solid Core, Red
    x
                

    Taylor Cable’s 8mm Spiro-Pro Series outperforms the competition in both looks and performance at a price you can afford. Spiro-Pro is simply a top of the line high performance 8mm ignition wire and is an excellent choice for race only applications with it's solid wire core.

    • 90 Degree Boots
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Use with magnetos and point style ignition systems (non electronic)
    • Fully assembled
    • Coil wire is 35" long and requires final assembly
  • Taylor Cable 70650 8mm Spark Plug Wires, 90 Deg Boot, Wire Core, Blue
    Taylor Cable 70650 8mm Spark Plug Wires, 90 Deg Boot, Wire Core, Blue
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Universal fit for HEI and socket style caps 

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70654 8mm Spark Plug Wires, Straight Boot, Wire Core, Blue
    Taylor Cable 70654 8mm Spark Plug Wires, Straight Boot, Wire Core, Blue
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire Core for racing applications
    • Universal fit for HEI or Socket style caps

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70050 8mm Spark Plug Wires, 90 Deg. Boot, Wire Core, Black
    Taylor Cable 70050 8mm Spark Plug Wires, 90 Deg. Boot, Wire Core, Black
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Universal fit for HEI and socket style caps 

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 70254 8mm Spark Plug Wires, Straight Boot, Wire Core
    Taylor Cable 70254 8mm Spark Plug Wires, Straight Boot, Wire Core
    x
                Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire Core for racing applications
    • Universal fit for HEI or Socket style caps

    Recommended for use with Vertex Magnetos.

    8mm Pro Wire Application Chart (GIF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Moroso 72800 Solid Core Spark Plug Wires, Straight Boot, Blue Max
    Moroso 72800 Solid Core Spark Plug Wires, Straight Boot, Blue Max
    x
                Blue Max solid core spark plug wires combine state-of-the-art engineering with the finest workmanship and quality control available! These solid core sets are pre-terminated at the spark plug end and include enough wire, boots and terminals so you can complete the distributor/magneto end. Wire color is blue. Not for use with MSD components. 
    • 8mm super-high-performance wire for racing only
    • Engineered for magneto and other ignitions that do not require electro-magnetic interference (EMI) suppression
    • Combination silver-plated copper and stainless steel "solid core" provides maximum conductivity and strength
    • Each wire individually tested for continuity after termination to ensure race-ready performance
    • Universal set fits both HEI and socket style caps
    • Spark plug terminals and boots factory installed
    • You install distributor ends

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Moroso 73226 8mm Spark Plug Wires, Straight Boot, Spiral Core, Blue Max
    Moroso 73226 8mm Spark Plug Wires, Straight Boot, Spiral Core, Blue Max
    x
                

    The superiority of Moroso Blue Max 8 mm, 800 ohm Spiral Core Wire comes from over 27 years of continual refinement. The combination of Moroso engineering expertise and a rigorous testing program makes this the finest ignition wire available for street or race. 

    These sets are terminated at the plug end only and include enough wire length and terminals to fit HEI or Non-HEI distributors. You install the distributor ends. Wire color is blue.

    • Universal plug wire set
    • Optimized combination of capacitance, inductance and resistance provides more spark energy and EMI protection than any other spiral core wire available
    • Eliminates interference with on-board electronics and provides static-free sound quality for car audio systems
    • Spark plug terminals and boots factory installed
    • You install distributor ends
    • Fits HEI or Socket style caps

    Spark Plug Wire Installation Instructions (PDF)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • MSD 31239 8.5mm Universal Spark Plug Wires Set, 90 Degree Boot
    MSD 31239 8.5mm Universal Spark Plug Wires Set, 90 Degree Boot
    x
                

    What makes or breaks a plugwire is not only how well the wire is insulated, but how low of resistance the center core has.  These wire sets test 40-50 ohms per foot, while most others test 1500 ohms per foot. Low Resistance

    These plug wires do require assembly although the plug end is alread installed.  Both HEI and socket style distributor ends are supplied.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor 8mm Spark Plug Wires Set, Spiro-Pro
    Taylor 8mm Spark Plug Wires Set, Spiro-Pro
    x
                Features: 
    • Spiral metal wire core
    • 350 ohms/ft. resistance
    • 8 mm silicone inner and outer jacket
    • Silicone boots with grips
    • Double spring locking plug terminals
    • Fiberglass braid for more pull strength
    • Universal fit for HEI or Socket style caps

    Heat protection up to 600° F.  A must when using pit radios.  Red or Blue wires with Straight or 90 Degree boots.

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic spark plug wire set. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals
    • For 1975-86 GM small block V8 HEI (over valve covers)

    Ceramic Wire Core Cut-A-Way (Link)

  • Moroso 72820 8mm Spark Plug Wires, Solid Core, 90 Degree Boot, Blue Max
    Moroso 72820 8mm Spark Plug Wires, Solid Core, 90 Degree Boot, Blue Max
    x
                

    The combination of Moroso engineering expertise and a rigorous testing program makes this the finest ignition wire available for your racecar. 

    These sets are terminated at the plug end only and include enough wire length and terminals to fit HEI or Non-HEI distributors. You install the distributor ends. Wire color is blue.

    •  Universal plug wire set fit socket or HEI caps
    • These 8 mm wires incorporate the latest technology in temperature and conductivity
    • Solid core wires recommended for magneto use
    • Spark plug terminals and boots factory installed
    • You install distributor ends

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Taylor Cable 76239 8mm Solid Core Spark Plug Wires Under Headers, 90  , Red
    Taylor Cable 76239 8mm Solid Core Spark Plug Wires Under Headers, 90 , Red
    x
                

    Taylor Cable’s 8mm Spiro-Pro Series outperforms the competition in both looks and performance at a price you can afford. Spiro-Pro is simply a top of the line high performance 8mm ignition wire and is an excellent choice for race only applications with it's solid wire core.

    • 90 Degree Boots
    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Use with magnetos and point style ignition systems (non electronic)
    • Fully assembled
    • Coil wire is 35" long and requires final assembly
  • MSD 31329 8.5mm Spark Plug Wires Set, Small Block Ford, HEI Cap
    MSD 31329 8.5mm Spark Plug Wires Set, Small Block Ford, HEI Cap
    x
                Please view the product's page for more information
            
  • Taylor Cable 76638 8mm Solid Core Spark Plug Wires, Over Valve, HEI, 90
    Taylor Cable 76638 8mm Solid Core Spark Plug Wires, Over Valve, HEI, 90
    x
                

    Taylor Cable’s 8mm Spiro-Pro Series outperforms the competition in both looks and performance at a price you can afford. Spiro-Pro is simply a top of the line high performance 8mm ignition wire and is an excellent choice for race only applications with it's solid wire core.

    • High grade silicone over silicone resists temperatures up to 600°
    • Color coordinated silicone boots add a touch of class
    • HEI boots have "Professional Grips" for easy on/off installation
    • Double spring locking spark plug terminals provide a firm grip
    • Wire core for racing applications
    • Use with magnetos and point style ignition systems (non electronic)
    • Fully assembled
    • Coil wire is 35" long and requires final assembly
  • Accel 9018C GM HEI 75-86 Extreme 9000 Ceramic Plug Wires, Under Valve
    Accel 9018C GM HEI 75-86 Extreme 9000 Ceramic Plug Wires, Under Valve
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic spark plug wire set. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals
    • For 1975-86 GM small block V8 HEI (under valve covers)

    Ceramic Wire Core Cut-A-Way (Link)

  • Taylor Cable 79651 409 Spark Plug Wires - 90 Degree Boot - Universal
    Taylor Cable 79651 409 Spark Plug Wires - 90 Degree Boot - Universal
    x
                

    Features a Spiral-Wound core with 350 ohms per foot resistance for EMI and RFI suppression delivering maximum fire power without radio interference and recommended for use with multiple-spark discharge and electronic ignition systems. For professional race and street applications. Universal fit for V8.

    • Sleeving is bonded directly over 8 mm Pro Wire
    • Dielectric strength of 100,000 volts-plus
    • 3 layers of silicone for heat protection up to 600 degrees F
    • .409" diameter (10.4 mm)
    • Tightly woven, heat treated fiberglass skin
    • Spiral wound or wire conductor cores
    • Taylor "90° Pro Boot" bonded to the wire

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

Goto Previous PagePrevious Page
1 2 3 4 5