Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"small steel roller" Page 1 of 2

  • Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.5:1, 3/8 Stud
    Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.5:1, 3/8 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
  • Small Block Chevy Steel Roller Tip Rocker Arms, 1.5:1
    Small Block Chevy Steel Roller Tip Rocker Arms, 1.5:1
    x
                Stock type long slot steel rockers with roller tip installed. Includes stock type balls and nuts. Fits S/B Chevy with 3/8" rocker arm studs. Set of 16.
            
  • Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.6:1, 3/8 Stud
    Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.6:1, 3/8 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
  • Cloyes Gear 9-3100A Hex-A-Just Timing Chain Set, Small Block Chevy
    Cloyes Gear 9-3100A Hex-A-Just Timing Chain Set, Small Block Chevy
    x
                

    Cloyes Hex-A-Just True Roller Set is infinitely adjustable to plus or minus six degrees. No machining required, no fumbling with offset bushings. Simply dial in your cam timing with the turn of a wrench, then tighten the cam bolts to lock the cam position in place. Whether your destination is the street or the track, Hex-A-Just will get you there fast!

    • Billet steel, induction hardened sprockets
    • Cloyes' patented Hex-A-Just allows for +/- six degrees adjustment
    • Premium Cloyes True Roller gear chain with .250” diameter rollers
    • 3-keyway billet crank sprocket
    • All sets “hand matched” at factory to ensure accurate center distance
    • Includes needle bearing thrust bearing
  • Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.5:1, 7/16 Stud
    Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.5:1, 7/16 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
  • Small Block Chevy Stainless Steel Roller Rocker Arms, 1.5:1, 7/16 Stud
    Small Block Chevy Stainless Steel Roller Rocker Arms, 1.5:1, 7/16 Stud
    x
                

    These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • Small Block Chevy Stainless Steel Roller Rocker Arms, 1.6:1, 3/8 Stud
    Small Block Chevy Stainless Steel Roller Rocker Arms, 1.6:1, 3/8 Stud
    x
                

    These Small Block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • Small Block Chevy Stainless Steel Roller Rocker Arms, 1.5:1, 3/8 Stud
    Small Block Chevy Stainless Steel Roller Rocker Arms, 1.5:1, 3/8 Stud
    x
                

    These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • Crane Cams 11951-1 Steel Distributor Gear for Chevy, .491 Inch Shaft
    Crane Cams 11951-1 Steel Distributor Gear for Chevy, .491 Inch Shaft
    x
                These distributor gears from Crane Cams are intended for people using steel roller camshafts. They are manufactured with a special heat-treating process that  makes them compatible with steel cams. Roller cams are made of materials that are  NOT compatible with the stock distributor gears. Crane Cams now gives you the ability to use a steel distributor gear with an OEM-style lifespan, but without damaging your cam.              
    • Steel Distributor Gear for Chevy 262-400 and 396-454 V-8
    • .491'' shaft diameter
    • Also fits Crane and Accel 34000, 35000, and 41000 series
    • A must for steel roller cams

    Note: The *Shaft Diameter* dimension referred to is the portion of the distributor shaft that the gear registers on. It may be necessary to remove the original.

  • Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.6:1, 7/16 Stud
    Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.6:1, 7/16 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
  • Small Block Chevy Stainless Steel Roller Rocker Arms, 1.6:1, 7/16 Stud
    Small Block Chevy Stainless Steel Roller Rocker Arms, 1.6:1, 7/16 Stud
    x
                

    These S/B Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • COMP Cams 891-16 Chevy Endure-X Solid Roller Lifters, Small Base Cam
    COMP Cams 891-16 Chevy Endure-X Solid Roller Lifters, Small Base Cam
    x
                

    Today’s engines place a greater demand on lifters than ever before. With more aggressive cam lobe designs and increased rpm ranges, it takes a superior roller lifter to withstand the abuse. COMP Cams has set the industry standard with the Endure-X Solid Roller Lifters. Endure-X Lifters are fully heat-treated, machined to ultra-high tolerances, and are fully rebuildable. 

    Recommended for use with .875" or smaller base circle camshafts. Fits small block Chevy V8 265-400 (set of eight lifters).

    • Removable Link Bar
      • Patented assembly with benefits of a removable link bar
      • Safety of a captured link bar
    • EDM Oil Injection Technology
      • Bearing assembly receives  constant flow of pressurized oil via precision hole aimed directly at needle bearings
    • Precision Sorted Bearings
      • Needle bearings are sorted by size to distribute load evenly
      • Prevents premature wear and failure
    • Tool Steel Axle
      • Made of wear resistant tool steel to prolong the life of roller assembly, particularly in high rpm applications

     

  • Cloyes Gear C3023X S/B Chevy Double Roller Timing Chain
    Cloyes Gear C3023X S/B Chevy Double Roller Timing Chain
    x
                

    These heavy duty double-roller timing chain sets for S/B Chevy V8s feature .200" diameter rollers, cast iron cam sprockets and high-quality, heat-treated steel crank sprockets with triple keyways.

  • Small Block Chevy Steel Roller Tip Rocker Arms, 1.6:1
    Small Block Chevy Steel Roller Tip Rocker Arms, 1.6:1
    x
                Stock type long slot steel rockers with roller tip installed. Includes stock type balls and nuts. Fits S/B Chevy with 3/8" rocker arm studs. Set of 16.
            
  • Small Block Chevy Stainless Steel Roller Rocker Arms-Split Ratio-3/8 Stud
    Small Block Chevy Stainless Steel Roller Rocker Arms-Split Ratio-3/8 Stud
    x
                

    These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
    • 1.5/1.6 Ratio
  • GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    New
    GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    x
                Please view the product's page for more information
            
  • Small Block Ford Steel Roller Tip Rockers
    Small Block Ford Steel Roller Tip Rockers
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these rockers. Made from 4340 heat treated steel and feature a longer slot to eliminate stud bind issues. Includes nuts and balls. 

    Rockers accommodate a 5/16" pushrod.

  • Chevy Fuel Pump Push Rod for Roller Cams
    Chevy Fuel Pump Push Rod for Roller Cams
    x
                

    These lightweight fuel pump pushrods are specifically for use with 8620 and 9310 steel billet roller and slot hardfaced camshafts. One end of the pushrod has a bronze tip to bear against the fuel pump eccentric on the camshaft, eliminating the wear problems that occur when using a standard fuel pump pushrod (especially in endurance type applications).

    • Fits both S/B Chevy 262-400 (1955-1995) and B/B Chevy 396-454 (1965-1990)
    • Heat treated tubular steel construction
    • Centerless ground for concentricity
    • Much lighter than solid steel O.E. type pushrods

     

     

  • Small Block Chevy Stainless Roller Rocker Arms, Split Ratio, 7/16 Stud
    Small Block Chevy Stainless Roller Rocker Arms, Split Ratio, 7/16 Stud
    x
                

    These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
    • 1.5/1.6 Ratio
  • Cloyes Gear 9-3100 Small Block Chevy True Roller Timing Chain
    Cloyes Gear 9-3100 Small Block Chevy True Roller Timing Chain
    x
                

    Cloyes True Rollers are the original, all-out race proven double roller timing chain sets. Cam sprockets are balanced and made from heat treated 30,000 PSI tensile cast iron, or SAE D7003 ductile iron. Sets have multi-keyway crank sprockets.

    • Ductile Iron or Induction Hardened Cast Iron Cam Sprocket
    • Cloyes Premium True Roller Chain with .250 Diameter Rollers
    • SAE 1144 Billet Steel, Induction Hardened Crank Sprocket with 3 keyways, +/- 4 Degrees
    • All sets are “Hand Matched” to ensure true center distance

    Fits 1955-1984 265-400 Chevy small block V8.

  • COMP Cams 818-16 Chevy Endure-X Solid Roller Lifters, Standard Cam
    COMP Cams 818-16 Chevy Endure-X Solid Roller Lifters, Standard Cam
    x
                

    Today’s engines place a greater demand on lifters than ever before. With more aggressive cam lobe designs and increased rpm ranges, it takes a superior roller lifter to withstand the abuse. COMP Cams has set the industry standard with the Endure-X Solid Roller Lifters. Endure-X Lifters are fully heat-treated, machined to ultra-high tolerances, and are fully rebuildable. 

    Recommended for use with .900" or larger base circle camshafts. Fits small block Chevy V8 265-400 (set of eight lifters).

    • Removable Link Bar
      • Patented assembly with benefits of a removable link bar
      • Safety of a captured link bar
    • EDM Oil Injection Technology
      • Bearing assembly receives  constant flow of pressurized oil via precision hole aimed directly at needle bearings
    • Precision Sorted Bearings
      • Needle bearings are sorted by size to distribute load evenly
      • Prevents premature wear and failure
    • Tool Steel Axle
      • Made of wear resistant tool steel to prolong the life of roller assembly, particularly in high rpm applications
  • Cloyes Gear 9-3146A Hex-A-Just Timing Chain Set, S/B Chevy, Raised Cam
    Cloyes Gear 9-3146A Hex-A-Just Timing Chain Set, S/B Chevy, Raised Cam
    x
                

    Cloyes Hex-A-Just True Roller Set is infinitely adjustable to plus or minus six degrees. No machining required, no fumbling with offset bushings. Simply dial in your cam timing with the turn of a wrench, then tighten the cam bolts to lock the cam position in place. Whether your destination is the street or the track, Hex-A-Just will get you there fast!

    • Includes needle bearing thrust bearing
    • Billet Steel, Induction Hardened Sprockets
    • Cloyes' Patented Hex-A-Just allows for +/- six degrees adjustment
    • Premium Cloyes True Roller Chain with .250” diameter rollers
    • 3 Keyway Billet Crank Sprocket
    • All sets “Hand Matched” at factory to ensure accurate center distance
  • Speedway Small Block Chevy Tall Steel Valve Covers
    Speedway Small Block Chevy Tall Steel Valve Covers
    x
                Clears rocker arm stud girdles or roller rockers. Perfect for welding in breather tubes. Fits '60-'86 S/B Chevy V8.
            
  • Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.5:1, 3/8 Stud
    Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.5:1, 3/8 Stud
    x
                

    BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. Includes polylocks.

    • Designed to meet the demands of most high-lift roller camshaft profiles
    • Specially machined to accommodate larger valve springs and retainers
    • SAE-52100 Full complement precision needle and cage roller bearings
    • Anodized for a superior finish and to reduce operating temperatures
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. polylocks included

     

  • Tru-Gear Small Block Chevy Noisy Gear Drive
    Tru-Gear Small Block Chevy Noisy Gear Drive
    x
                

    Replace your timing chain with a Speedway Tru-Gear gear drive. Unlike timing chains, a gear drive doesn't stretch, so your cam timing stays more accurate. We builds these drives with dual idler gears, making them more stable than single idler gear drives. A Tru Gear gear drive is as easy to install as a timing chain and will fit under your stock timing chain cover. Noisy gears give your engine a "supercharged" sound. 

    For use on Chevrolet Small Block engines 1957–1995 262-400 c.i. all without “FACTORY” hydraulic roller camshaft.

    453-3271N Instuctions (PDF)

  • Speedway Super Duty Stainless Steel Intake Valve, 1.94 Inch, Std. Length
    Speedway Super Duty Stainless Steel Intake Valve, 1.94 Inch, Std. Length
    x
                

    These are high strength, one-piece stainless steel valves that are priced for a claimer motor, but superior to most mid-priced valves. Features a chrome stem and hardned tip. Undercut and swirl polished heads for increased flow. For small block Chevy. 

    • Chrome stems and hard tips
    • For: Small Block Chevy
    • High strength one-piece design
    • Undercut and swirl-polished heads for increased flow
    • Sold each

    Note: These standard length valves will work in Vortec heads unless you're running a roller cam and longer springs in which case you will need additional length on the valves.

  • Dart 31161211 Special High Performance Chevy Block, 4.125 Inch Bore
    Dart 31161211 Special High Performance Chevy Block, 4.125 Inch Bore
    x
                

    Dart's Special High Performance (SHP) small-block meets the need for an affordable, precision-machined cast-iron block with superior features. Designed for high-performance and heavy-duty applications producing up to 600 horsepower, the SHP block is the ideal starting point for hot rodders, drag racers, circle track competitors, off-roaders, and high-performance marine enthusiasts. The SHP block as all the features needed without spending the big bucks and having to wait on your machine shop.

    • All new, precision machined
    • Cast from high nickel iron
    • Priority main oiling system
    • Siamese 4.125" bores
    • At 4.165" bore, .230" wall thickness
    • Clearance for 3.75" stroke w/ steel rods
    • Decks parallel within .002"
    • Made in USA
    • Blind head bolt holes
    • 350 main journals
    • Splayed 4-bolt center main caps
    • Two piece rear main seal
    • Accepts OEM roller rockers and cams
    • Uses 1981-85 oil pans & dipsticks
    • Accepts standard starters and bellhousings

    Dart SHP Block Instructions (PDF)

  • Small Block Chevy Roller Cam Button, 0.795 Inch Long
    Small Block Chevy Roller Cam Button, 0.795 Inch Long
    x
                

    Engines without a cam thrust plate must use a cam button spacer when using a roller lifter camshaft to limit lateral movement (cam walk). These horsepower saving needle bearing cam buttons reduce friction and prevent cam walk, inaccurate timing, and premature timing chain wear.

    • Uses a Nylatron Bushing
    • A must with roller lifter camshafts
    • Steel
    • Horsepower saving
    • Reduce friction
    • Prevent cam walk
    • Prevent inaccurate timing
    • Prevent premature timing chain wear due to cam walk

    Fits: 1978-86 Chevy 90° V6 (200 thru 262 c.i.) and 1955-95 Chevy small block V8 (262 thru 400 c.i.).

  • GM Performance 19201330 Small Block Chevy ZZ4 350 Turn-Key Crate Engine
    GM Performance 19201330 Small Block Chevy ZZ4 350 Turn-Key Crate Engine
    x
                Please view the product's page for more information
            
  • Cloyes Gear 9-3135 Ford 302-351W Tru Roller Timing Chain-Prior 3-21-84
    Cloyes Gear 9-3135 Ford 302-351W Tru Roller Timing Chain-Prior 3-21-84
    x
                

    Only Cloyes makes the original, all-out race proven true roller timing chain set. Cam sprockets are balanced and made from heat treated 30,000 PSI tensile cast iron, or SAE D7003 ductile iron. Sets have multi-keyway crank sprockets. The original True Roller sets remain the benchmark against which all others are measured.

    • Heat Treated SAE 1144 Steel Cam Sprocket
    • Cloyes Premium True Roller Gear Chain with .250 Diameter Rollers
    • Billet Steel, Induction Hardened Crank Sprocket with 3 keyways, +/- 4 Degrees
    • All sets are “Hand Matched” to ensure true center distance
  • Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.5:1, 7/16 Stud
    Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.5:1, 7/16 Stud
    x
                

    BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem.

    • Designed to meet the demands of most high-lift roller camshaft profiles
    • Specially machined to accommodate larger valve springs and retainers
    • SAE-52100 Full complement precision needle and cage roller bearings
    • Anodized for a superior finish and to reduce operating temperatures
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included

     

  • Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.6:1, 3/8 Stud
    Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.6:1, 3/8 Stud
    x
                

    BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. 

    • Designed to meet the demands of most high-lift roller camshaft profiles
    • Specially machined to accommodate larger valve springs and retainers
    • SAE-52100 Full complement precision needle and cage roller bearings
    • Anodized for a superior finish and to reduce operating temperatures
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included

     

  • Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.6:1, 7/16 Stud
    Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.6:1, 7/16 Stud
    x
                

    BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. 

    Includes polylocks.  

    • Designed to meet the demands of most high-lift roller camshaft profiles
    • Specially machined to accommodate larger valve springs and retainers
    • SAE-52100 Full complement precision needle and cage roller bearings
    • Anodized for a superior finish and to reduce operating temperatures
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • 351C-429-460 Ford Steel Roller Rocker Arms
    351C-429-460 Ford Steel Roller Rocker Arms
    x
                

    These Sportsman 429/460 Ford roller rocker arms are made from 4340 heat treated steel and feature a longer slot to eliminate stud bind issues. Rockers have a 1.72 ratio and are supplied with pivot balls and polylocks for 7/16" studs. 

    Fits 1968-1997 Boss 302, 351C-M, 400, 429, and 460 Big Block Ford V8. Set of 16.

     

    NOTE: Use of this rocker arm requires the use of screw-in studs and guide plates. Some machine work required for the install of the screw-in studs. 

  • BluePrint 383 Small Block Chevy Crate Engine
    BluePrint 383 Small Block Chevy Crate Engine
    x
                Please view the product's page for more information
            
  • Tru-Gear Small Block Chevy Gear Drive
    Tru-Gear Small Block Chevy Gear Drive
    x
                

    Replace your timing chain with a Speedway Tru-Gear gear drive. Unlike timing chains, a gear drive doesn't stretch, so your cam timing stays more accurate. We builds these drives with dual idler gears, making them more stable than single idler gear drives. A Tru Gear gear drive is as easy to install as a timing chain and will fit under your stock timing chain cover.

    • Easy to install
    • Compatible with all standard camshafts
    • SAE 660 silicon bronze rear thrust ring included
    • Rugged Cr40 alloy steel gears assure prolonged trouble-free operation
    • Axial needle and cage forward thrust bearings reduce friction
    • Designed for precise multiple cam timing adjustments
    • Absolutely no adverse wear to camshaft or valvetrain components
    • Dyno tests prove no horsepower loss compared to a chain

    For use on Chevrolet Small Block engines 1957–1995 262-400 c.i. all without “FACTORY” hydraulic roller camshaft.

    Small Block Chevy Gear Drive Installation Instructions (PDF)

  • Chevrolet Performance 19318604 Sealed 400 604 Small Block Crate Engine
    Chevrolet Performance 19318604 Sealed 400 604 Small Block Crate Engine
    x
                Please view the product's page for more information
            
  • BluePrint 383 Small Block Chevy Roller Crate Engine
    BluePrint 383 Small Block Chevy Roller Crate Engine
    x
                Please view the product's page for more information
            
  • Speedway Chevy Tall Valve Covers w/ Breather Tubes, Plain Steel
    Speedway Chevy Tall Valve Covers w/ Breather Tubes, Plain Steel
    x
                

    Valve covers have 1-3/8" breather tubes on one side only. Extra tall to clear rocker arm stud girdles or roller rockers. Fits '60-'86 small block Chevy V8. Breathers not included.

  • Dart 31161111 Special High Performance Chevy Block, 4.00 Inch Bore
    Dart 31161111 Special High Performance Chevy Block, 4.00 Inch Bore
    x
                

    Dart's Special High Performance (SHP) small-block meets the need for an affordable, precision-machined cast-iron block with superior features. Designed for high-performance and heavy-duty applications producing up to 600 horsepower, the SHP block is the ideal starting point for hot rodders, drag racers, circle track competitors, off-roaders, and high-performance marine enthusiasts. The SHP block as all the features needed without spending the big bucks and having to wait on your machine shop.

    • All new, precision machined
    • Cast from high nickel iron
    • Priority main oiling system
    • Siamese 4.000" bores
    • At 4.165" bore, .230" wall thickness
    • Clearance for 3.75" stroke w/ steel rods
    • Decks parallel within .002"
    • Made in USA
    • Blind head bolt holes
    • 350 main journals
    • Splayed 4-bolt center main caps
    • Two piece rear main seal
    • Accepts OEM roller rockers and cams
    • Uses 1981-85 oil pans & dipsticks
    • Accepts standard starters and bellhousings

    Dart SHP Block Instructions (PDF)

Goto Previous PagePrevious Page
1 2