Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"small body shocks" Page 1 of 25

  • Shockwears Coilover Shock Protectors, Small Body w/ 1-7/8 I.D. Spring
    Shockwears Coilover Shock Protectors, Small Body w/ 1-7/8 I.D. Spring
    x
                Shock and spring protective cover by Outerwears for use with small body shocks with 1-7/8" I.D. spring. Coil over protectors available in red, blue or black in a 10" length. Sold in pairs.
            
  • Bilstein LF10MMS Small Body Shock Bearing Ends
    Bilstein LF10MMS Small Body Shock Bearing Ends
    x
                

    Bearing ends for Bilstein small body shocks. Fits Bilstein only.

     

    • 10mm-1 thread.

     

  • Carrera 7553 Small Body Gas Cell Hyper Shock-5 In Stroke, Comp 3/Reb 3
    Carrera 7553 Small Body Gas Cell Hyper Shock-5 In Stroke, Comp 3/Reb 3
    x
                

    A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

    Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

    Hyper Shock Application Chart (GIF)

    • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
    • 1-3/16" Piston
    • 1/2" Hard Chrome Plated, Polished Piston Rod
    • Twin Tube Design
    • 1-5/8" O.D. Chrome Plated Steel Body
    • Can Be Run Upside Down
    • 1/2" bearing ends

    Coil-Over Illustration (GIF)

  • Pro Shocks SB62 Pro Small Body Steel Shock-6 In. Stroke, Comp 2, Reb 2
    Pro Shocks SB62 Pro Small Body Steel Shock-6 In. Stroke, Comp 2, Reb 2
    x
                

    Pro Steel small body shocks have a non-adjustable zinc plated gas cell shock. Carbon steel shaft is chromed and centerless ground for longer seal life. Features a unique 1/2" removable bearing mount. Shocks are sold less bearing ends. OK for use with coil overs.  1.63 diameter.

    6" Stroke -- Compression Length: 11.65", Extension Length: 17.65"

    Pro Small Steel Shock Chart Application (GIF)

  • Shock Extensions for Small Body Pro Shocks, 2 Inch, 1/2-20 Thread
    Shock Extensions for Small Body Pro Shocks, 2 Inch, 1/2-20 Thread
    x
                

    Works with Pro Shocks small body shocks and shock end #582-275 only.

    Steel shock stud extenders.

    Extensions fasten directly to Pro Shocks small body shock absorbers for added suspension travel.

    • 2 Inch, 1/2-20 Thread
    • Sold as a pair.

     

  • AFCO Small Body Non-Adjustable Bulb Shock
    AFCO Small Body Non-Adjustable Bulb Shock
    x
                AFCO Racing Products releases the most versatile  small body shock in the industry today.  Each shock is hand crafted  & DYNO tested in Boonville, IN.  Engineered to maximize low speed  control and grip this shock features a low friction, high temperature  sealing system. A second feature integrated into the design was a larger  main piston, deflective disc base valve and increase gas chamber to  enhance lap after lap performance, stability. Many fixed valve shock  options to choose from.
    • Superior Base Valve Design
    • Maximum torsion bar arm clearance
    • Low gas pressure
    • Minimal rod pressure gain
    • Rebuildable/revalvable
    • Standard valved shocks
    • Linear and Digressive Piston Design
  • Carrera 7562 Small Body Gas Cell Hyper Shock-6 In Stroke, Comp 2/Reb 2
    Carrera 7562 Small Body Gas Cell Hyper Shock-6 In Stroke, Comp 2/Reb 2
    x
                

    A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

    Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

    Hyper Shock Application Chart (GIF)

    • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
    • 1-3/16" Piston
    • 1/2" Hard Chrome Plated, Polished Piston Rod
    • Twin Tube Design
    • 1-5/8" O.D. Chrome Plated Steel Body
    • Can Be Run Upside Down
    • 1/2" bearing ends

    Coil-Over Illustration (GIF)

  • Pro Shocks C375 Coil-over Kit for SBA Small Body Shock
    Pro Shocks C375 Coil-over Kit for SBA Small Body Shock
    x
                

    For early design Pro small body smooth aluminum shocks that have retaining clip groove, for 1-7/8" I.D. springs. 4" in length. SBA shocks are 1.63" O.D.

    Note: Current Pro small body smooth aluminum shocks do not have the retaining clip groove and therefore are a non-coilover design shock. If a coil-over shock is required, a threaded body shock must be used in conjunction with coil-over kit 582-C330 for 1-7/8" springs or 582-C335 for 2-1/2" springs.

    Coil-Over Mounting Guide (GIF)

  • Pro Shocks SB631 Small Body Steel Shock, 6 Inch Stroke, Comp 3, Reb 1
    Pro Shocks SB631 Small Body Steel Shock, 6 Inch Stroke, Comp 3, Reb 1
    x
                

    Pro Steel small body shocks have a non-adjustable zinc plated gas cell shock. Carbon steel shaft is chromed and centerless ground for longer seal life. Features a unique 1/2" removable bearing mount. Shocks are sold less bearing ends. OK for use with coil overs.  1.63 diameter.

    6" Stroke -- Compression Length: 11.65", Extension Length: 17.65"

    Pro Small Steel Shock Chart Application (GIF)

  • AFCO Small Body Adjustable Bulb Shock
    From: $329.99
    New
    AFCO Small Body Adjustable Bulb Shock
    x
                

    AFCO Racing Products releases the most versatile small body shock in the industry today.  Each shock is hand crafted & DYNO tested in Boonville, IN.  Engineered to maximize low speed control and grip this shock features a low friction, high temperature sealing system. A second feature integrated into the design was a larger main piston, deflective disc base valve and increase gas chamber to enhance lap after lap performance, stability. Compression and rebound adjustable.

    • Superior base valve design
    • Maximum torsion bar arm clearance
    • Low gas pressure
    • Minimal rod pressure gain
    • Rebuildable/revalvable
    • Compression Adjustable
    • Rebound Adjustable
    • Base valve Design
    • Linear and Digressive Piston Design
  • Pro Shocks ASB514B Small Body Threaded Alum 5 Inch Shock, Comp 1/Reb 4
    Pro Shocks ASB514B Small Body Threaded Alum 5 Inch Shock, Comp 1/Reb 4
    x
                

    Pro Shock Ulitmate Series shocks are dynode serial numbered and come with a dyno sheet. ASB Series shocks feature a small threaded body shock.

    Comp. Length: 10-3/8"
    Ext. Length: 13-3/8"

    Pro Threaded Small Body Alum. Shock Chart Application (GIF)

  • Pro Shocks ASB530B Small Body Threaded Alum 5 Inch Shock Comp 3, Reb 3
    Pro Shocks ASB530B Small Body Threaded Alum 5 Inch Shock Comp 3, Reb 3
    x
                

    Pro Shock Ulitmate Series shocks are dynode serial numbered and come with a dyno sheet. ASB Series shocks feature a small threaded body shock.

    Comp. Length: 10-3/8"
    Ext. Length: 13-3/8"

    Pro Threaded Small Body Alum. Shock Chart Application (GIF)

  • Pro Shocks ASB742B Small Body Threaded Alum 7 Inch Shock, Comp 4/Reb 2
    Pro Shocks ASB742B Small Body Threaded Alum 7 Inch Shock, Comp 4/Reb 2
    x
                

    Pro Shocks ultimate series shocks are dynode serial numbered and come with a dyno sheet.  ASB series shock feature a small threaded body shock.

    Comp. Length: 12-3/8"
    Ext. Length: 19-3/8"

    Pro Alum. Small Body Threaded Shock Chart Application (GIF)

  • AFCO 2276 Small Body Rebuildable Twin-Tube Shock-7 Inch, Comp 6/Reb 6
    AFCO 2276 Small Body Rebuildable Twin-Tube Shock-7 Inch, Comp 6/Reb 6
    x
                

    AFCO R-Series Twin-Tube Shocks are packed with quality, performance and value, all inside a rebuildable steel body.  All internal parts of the AFCO Steel Take-A-Part shocks are identical to the components inside the aluminum body shocks, so you can expect the highest levels of performance and durability.

    AFCO Steel Body Take-A-Part Shocks let you meet your "steel shock rule" and still allow you to run the most precise shock in the industry.  With the Take-A-Part, you are no longer limited to "off the shelf valves," and you can have the performance of your used shocks brought back to full factory spec with a rebuild rather than having to purchase a new shock.

    • Compressed Length: 12.50"
    • Extended Length: 19.25"

    The small body steel Take-A-Part offers substantial weight savings as well as added clearance for suspension hardware and frame.  In fact, the small body is 36% lighter than standard 2.03 size shocks of the same stroke.  Also features a durable gloss finish for long life.

    All AFCO R-Series Shocks are 100% dyno tested, rebuildable and revalvable.

  • AFCO 2275 Small Body Rebuildable Twin-Tube Shock-7 Inch, Comp 5/Reb 5
    AFCO 2275 Small Body Rebuildable Twin-Tube Shock-7 Inch, Comp 5/Reb 5
    x
                

    AFCO R-Series Twin-Tube Shocks are packed with quality, performance and value, all inside a rebuildable steel body.  All internal parts of the AFCO Steel Take-A-Part shocks are identical to the components inside the aluminum body shocks, so you can expect the highest levels of performance and durability.

    AFCO Steel Body Take-A-Part Shocks let you meet your "steel shock rule" and still allow you to run the most precise shock in the industry.  With the Take-A-Part, you are no longer limited to "off the shelf valves," and you can have the performance of your used shocks brought back to full factory spec with a rebuild rather than having to purchase a new shock.

    • Compressed Length: 12.50"
    • Extended Length: 19.25"

    The small body steel Take-A-Part offers substantial weight savings as well as added clearance for suspension hardware and frame.  In fact, the small body is 36% lighter than standard 2.03 size shocks of the same stroke.  Also features a durable gloss finish for long life.

    All AFCO R-Series Shocks are 100% dyno tested, rebuildable and revalvable.

  • AFCO 2274 Small Body Rebuildable Twin-Tube Shock-7 Inch, Comp 4/Reb 4
    AFCO 2274 Small Body Rebuildable Twin-Tube Shock-7 Inch, Comp 4/Reb 4
    x
                

    AFCO R-Series Twin-Tube Shocks are packed with quality, performance and value, all inside a rebuildable steel body.  All internal parts of the AFCO Steel Take-A-Part shocks are identical to the components inside the aluminum body shocks, so you can expect the highest levels of performance and durability.

    AFCO Steel Body Take-A-Part Shocks let you meet your "steel shock rule" and still allow you to run the most precise shock in the industry.  With the Take-A-Part, you are no longer limited to "off the shelf valves," and you can have the performance of your used shocks brought back to full factory spec with a rebuild rather than having to purchase a new shock.

    • Compressed Length: 12.50"
    • Extended Length: 19.25"

    The small body steel Take-A-Part offers substantial weight savings as well as added clearance for suspension hardware and frame.  In fact, the small body is 36% lighter than standard 2.03 size shocks of the same stroke.  Also features a durable gloss finish for long life.

    All AFCO R-Series Shocks are 100% dyno tested, rebuildable and revalvable.

  • Carrera 7563 Small Body Gas Cell Hyper Shock-6 In Stroke, Comp 3/Reb 3
    Carrera 7563 Small Body Gas Cell Hyper Shock-6 In Stroke, Comp 3/Reb 3
    x
                

    A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

    Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

    Hyper Shock Application Chart (GIF)

    • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
    • 1-3/16" Piston
    • 1/2" Hard Chrome Plated, Polished Piston Rod
    • Twin Tube Design
    • 1-5/8" O.D. Chrome Plated Steel Body
    • Can Be Run Upside Down
    • 1/2" bearing ends

    Coil-Over Illustration (GIF)

  • Pro Shocks ASB52.05B Small Threaded Alum 5 Inch Shock, Comp 2/Reb 0.5
    Pro Shocks ASB52.05B Small Threaded Alum 5 Inch Shock, Comp 2/Reb 0.5
    x
                

    Pro Shock Ulitmate Series shocks are dynode serial numbered and come with a dyno sheet. ASB Series shocks feature a small threaded body shock.

    Comp. Length: 10-3/8"
    Ext. Length: 13-3/8"

    Pro Threaded Small Body Alum. Shock Chart Application (GIF)

  • Bilstein Custom 1-5/8 Inch Small Body Steel Shock, 7 Inch
    Bilstein Custom 1-5/8 Inch Small Body Steel Shock, 7 Inch
    x
                
    These mono-tube gas shocks feature the latest development in shock valving technology; digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. Bilstein has set the standard for years in Winston Cup, Indy Car and Formula 1. Now it's setting the standard for Modifieds, Late Models and Open Wheel.
    • Use on the front of Modifieds and Sprints
    • Also suitable for Midgets, TQ's, Dwarf Cars, etc.
    • Monotube gas pressure construction
    • Economy price
    • Lightweight
    • Low rod pressure
    • Bilstein's famous consistent, fade-free performance
    • Features one bearing end and one welded end
    • 1-5/8" steel body
    • 7" stroke
    • Custom valving 
  • Bilstein Custom Valve 1-5/8 Inch Small Body Steel Shock, 6 Inch
    Bilstein Custom Valve 1-5/8 Inch Small Body Steel Shock, 6 Inch
    x
                These mono-tube gas shocks feature the latest development in  shock  valving technology; digressive valving. This delivers a new level  of  control by damping slow suspension movements more effectively while  not  allowing the chassis to be upset by sharp bumps. Bilstein has set  the  standard for years in Winston Cup, Indy Car and Formula 1. Now it's   setting the standard for Modifieds, Late Models and Open Wheel. 
    • Use on the front of Modifieds and Sprints
    • Also suitable for Midgets, TQ's, Dwarf Cars, etc.
    • Monotube gas pressure construction
    • Economy price
    • Lightweight
    • Low rod pressure
    • Bilstein's famous consistent, fade-free performance
    • Features one bearing end and one welded end
    • 1-5/8" steel body
    • 6" stroke
    • Custom valving 
  • AFCO 1563 S Series Steel Small Body Twin-Tube Shock-6 In, Comp 3/Reb 3
    AFCO 1563 S Series Steel Small Body Twin-Tube Shock-6 In, Comp 3/Reb 3
    x
                

    AFCO S-Series Steel Sealed Body Twin-Tube Shocks offer performance, durability and value. With the identical internal components as the aluminum shocks, these shocks deliver the AFCO performance advantage lap after lap.

    • Can be mounted in any position without affecting performance
    • Mount the shocks "up-side-down" to save unsprung weight and give your suspension quicker reaction
    • Compression and rebound valving numbers remain the same whether the shock is right-side up or upside down
    • Coilover shocks use an integral groove and available snap ring (not included) to provide easy installation of coilover hardware
    • Welded eye ring for superior strength
    • Replaceable bearing for long life
    • 5/8" shaft prevents flexing
    • A wide selection of split valves and standard valves are available to fit a variety of applications and needs
    • Durable gloss powder coat finish for long life
    • Compressed Length: 11.45"
    • Extended Length: 17.75"
    • 1.64" O.D. Body
  • AFCO 16SB1 16 Series Single & Non-Adj. Small Body Shock Main Shims
    AFCO 16SB1 16 Series Single & Non-Adj. Small Body Shock Main Shims
    x
                AFCO 16 Series Single and Non-Adjustable Small Body shock rebuild kit.
            
  • AFCO 16SB2 16 Series Single & Non-Adj. Small Body Shock Bleed Shims
    AFCO 16SB2 16 Series Single & Non-Adj. Small Body Shock Bleed Shims
    x
                AFCO 16 Series Single and Non-Adjustable Small Body shock rebuild kit.
            
  • Pro Shocks SB624 Small Body Steel Shock, 6 Inch Stroke, Comp 2, Reb 4
    Pro Shocks SB624 Small Body Steel Shock, 6 Inch Stroke, Comp 2, Reb 4
    x
                

    Pro Steel small body shocks have a non-adjustable zinc plated gas cell shock. Carbon steel shaft is chromed and centerless ground for longer seal life. Features a unique 1/2" removable bearing mount. Shocks are sold less bearing ends. OK for use with coil overs.  1.63 diameter.

    6" Stroke -- Compression Length: 11.65", Extension Length: 17.65"

    Pro Small Steel Shock Chart Application (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25